Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index; none of the 5 sources its claims cite is checked for support yet.

The Science of Polymer Chemical Recycling Catalysis: Uncovering Kinetic and Thermodynamic Linear Free Energy Relationships

Open access
McGuire, Thomas M., Ning, David, Buchard, Antoine, Williams, Charlotte K. · 2025 · Journal of the American Chemical Society

Abstract

Polymer recycling must accelerate to limit ever-growing wastes and carbon dioxide emissions. Polymer chemical recycling to monomer enables multiple closed recycling loops, tackling the material and property losses endemic to mechanical recycling. Polyesters and polycarbonates, derived from 6- and 7-membered heterocycles, are leading sustainable materials produced by equilibrium polymerizations that can be reversed for selective and efficient chemical recycling to monomer. A systematic understanding of the depolymerization kinetic and thermodynamic structure-recycling relationships is needed; in particular, studies should focus on the low-energy and minimal-chemical additive conditions required for any larger-scale processes. Here, the depolymerization kinetic parameters, including rate constants and transition state energy barriers, are measured for a systematic series of leading aliphatic polyesters and polycarbonates. These recycling experiments are conducted under common conditions using neat polymer melts, at temperatures from 90 to 190 °C and with low loadings (1:100-1000) of a fast, selective, and commercial zinc-(II)-bis-(2-ethylhexanoate) catalyst. The systematic kinetic measurements quantify the influences of different repeat units, substituents, and end-group chemistries on the recycling process. All the polymers conform to a linear free energy relationship between the depolymerization kinetic (ΔGd⧧) and thermodynamic (ΔGd) energy differences. The discovery of recycling catalysis linear free energy relationships allows for the rational selection of the lowest temperature (and energy) recycling conditions, operable using neat polymers, to deliver both high monomer conversions and rates. The quantified structure-recycling relationships are also used to efficiently and selectively separate mixtures of structurally similar polymers by their quantitative chemical recycling into pure monomers.

Overview

CoChat Summary

TL;DR

This paper measures depolymerization kinetics for a systematic series of aliphatic polyesters and polycarbonates using a commercial Zn(II) catalyst under neat-melt, low-loading conditions, and uncovers a linear free energy relationship between recycling kinetics and thermodynamics. The relationship rationalizes structure–recycling trends and enables low-temperature selective recycling, including separation of structurally similar polymer mixtures.

Key findings

  • All polymers conform to a linear free energy relationship between the depolymerization kinetic barrier (ΔG_d‡) and thermodynamic barrier (ΔG_d); rate constants correlate exponentially with equilibrium constants. For example, PE-6b has K_d = 0.47 and k_d = 0.56 mol⁻¹ dm³ s⁻¹, while PE-7a has K_d = 0.0063 and k_d = 1.0 × 10⁻³ mol⁻¹ dm³ s⁻¹ at 130 °C.
  • Structure strongly controls recycling rate: changing from 7- to 6-atom repeat units increases rates by ∼100×; changing carbonate to ester increases rates by ∼25×; midchain substituents increase rates by ∼5×; alkyl substituents adjacent to the acyl oxygen decrease rates by ∼10× (∼20× for larger alkyl groups). Representative TOFs: PE-6a 7000 h⁻¹, PC-6a 400 h⁻¹, PE-7a 60 h⁻¹, PE-6b 15,900 h⁻¹, PE-6c 370 h⁻¹.
  • Recycling is highly selective (>99% in all cases), with monomer yields >50–99% and purity >90%; catalysis is first order in Zn(Oct)₂ and proceeds mainly via a polymer chain-end mechanism, supported by acetyl end-capped PE-7b-OAc showing <5% mass loss over 1 h versus >95% for hydroxyl-end-capped PE-7b.
  • The LFER enables separation of similar polymers: a PE-6b/PE-7c blend was selectively depolymerized at 90 °C and 190 °C, and a 1 g-scale distillation gave 6b in 97% yield/99% purity and 7c in >97% yield/>98% purity; a three-component PE-6b/PE-6c/PE-7c blend was separated at 90, 120, and 190 °C.

Methods

  • Synthesized 8 polyesters (PE-6a–d, PE-7a–d) and 3 polycarbonates (PC-6a–c) by ring-opening polymerization, all dihydroxy-terminated with degrees of polymerization of ca. 100; depolymerizations used neat polymer films with Zn(Oct)₂ loadings of 1:100–1:1000, temperatures from 90 to 190 °C, and dynamic vacuum or N₂ flow.
  • Kinetics were monitored by TGA with in-line IR spectroscopy, fitted with sigmoidal functions, and analyzed using Friedman isoconversional analysis, Arrhenius plots, and Eyring analysis; DFT calculations modeled ring-closure pathways.
  • Thermodynamic data were taken from neat polymer/monomer equilibria, and LFERs were constructed by plotting k_d versus K_d and ΔG_d‡ versus ΔG_d; blend separation tests used TGA-IR and laboratory-scale distillation.

Limitations

  • The paper states that the rate-determining step cannot be conclusively identified; DFT barriers for addition and elimination steps are within error, so the transition state is drawn as having character of both.
  • The paper states that TGA measurements assume mass loss correlates with depolymerization rate, though control experiments showed monomer volatilization/diffusion was 3–20× faster than catalyzed depolymerization.
  • Evident from the text: the study is limited to aliphatic polyesters and polycarbonates with 6- or 7-membered repeat units using Zn(Oct)₂ under neat-melt conditions; the authors note the concepts should be explored for other polymer chemistries and materials classes.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/jacs.5c04603

Cites

61 of 61 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

1 (a) Schematic illustrating the kinetic (ΔG d ⧧) and thermodynamic (ΔG d) barriers to polymer depolymerization. (b) The structures of the catalyst (zinc bis­(2-ethyl hexanoate), Zn­(Oct)2) and polymers (all chains are dihydroxyl end-capped); blue shading identifies substitutes for polyolefin plastics while purple shading identifies replacements for elastomers. Typical thermodynamic yields, from depolymerizations, are shown in brackets (further details in the Supporting Information (SI)).
1 (a) Schematic illustrating the kinetic (ΔG d ⧧) and thermodynamic (ΔG d) barriers to polymer depolymerization. (b) The structures of the catalyst (zinc bis­(2-ethyl hexanoate), Zn­(Oct)2) and polymers (all chains are dihydroxyl end-capped); blue shading identifies substitutes for polyolefin plastics while purple shading identifies replacements for elastomers. Typical thermodynamic yields, from depolymerizations, are shown in brackets (further details in the Supporting Information (SI)).CC BY · PubMed Central
2 (a) Proposed mechanism for the Zn­(Oct)2-catalyzed depolymerization of aliphatic polyesters. (b) Chemical recycling of neat polymer catalyst films to monomers. (bi) Plots of conversion (where conversion = 1 – m polymer,t /m polymer,0) vs time and sigmoidal fits. Recycling conditions: Zn­(Oct)2 (at 1:1000, [catalyst]0: [PE-6a]0 or [PE-6b]0 repeat unit, and 1:100 catalyst: [PE-6c]0 or [PE-6d]0 repeat unit), at 130 °C, N2 flow = 25 mL min–1. (bii) FTIR spectra comparing the PE-6c recycled product and a pure sample of the lactone, 6c. (c) Depolymerization rate constants for recycling in neat polymer films, at 130 °C, catalyzed by Zn­(Oct)2 and N2 flow 25 mL min–1. [Zn­(Oct)2]0: [polymer]0 = 1:1000–1:100 (see Table S19). Rate = k d2­[Zn­(Oct)2]0 where k d = k obs/(2­[Zn­(Oct)2]0).
2 (a) Proposed mechanism for the Zn­(Oct)2-catalyzed depolymerization of aliphatic polyesters. (b) Chemical recycling of neat polymer catalyst films to monomers. (bi) Plots of conversion (where conversion = 1 – m polymer,t /m polymer,0) vs time and sigmoidal fits. Recycling conditions: Zn­(Oct)2 (at 1:1000, [catalyst]0: [PE-6a]0 or [PE-6b]0 repeat unit, and 1:100 catalyst: [PE-6c]0 or [PE-6d]0 repeat unit), at 130 °C, N2 flow = 25 mL min–1. (bii) FTIR spectra comparing the PE-6c recycled product and a pure sample of the lactone, 6c. (c) Depolymerization rate constants for recycling in neat polymer films, at 130 °C, catalyzed by Zn­(Oct)2 and N2 flow 25 mL min–1. [Zn­(Oct)2]0: [polymer]0 = 1:1000–1:100 (see Table S19). Rate = k d2­[Zn­(Oct)2]0 where k d = k obs/(2­[Zn­(Oct)2]0).CC BY · PubMed Central
3 (a) Chemical recycling rate data for catalyzed depolymerization of PE-7b to 7b at temperatures from 120 to 160 °C (conditions: [Zn­(Oct)2]0:[PE-7b]0 = 1:100). Data are collected in triplicate and in each case are fit using the sigmoidal function (for rate constants, see Table S14). (b) Plot of ln­(k d/T) vs 1/T for the PE-7b recycling. The data was linearly fit and used to determine kinetic barriers, i.e., ΔH d ⧧, ΔS d ⧧, and ΔG d ⧧ (reactions repeated in triplicate; the errors are determined as the standard deviations of the mean). (c) Plot showing the change in rate constant at 130 °C, k d (×10–4 mol–1 dm3 s–1), across the polymer series on a log scale. (d) Plot illustrating the experimentally determined kinetic transition state barriers at 130 °C; ΔG d ⧧ determined from Eyring analysis for each of the polymers used in this study, see Table S21.
3 (a) Chemical recycling rate data for catalyzed depolymerization of PE-7b to 7b at temperatures from 120 to 160 °C (conditions: [Zn­(Oct)2]0:[PE-7b]0 = 1:100). Data are collected in triplicate and in each case are fit using the sigmoidal function (for rate constants, see Table S14). (b) Plot of ln­(k d/T) vs 1/T for the PE-7b recycling. The data was linearly fit and used to determine kinetic barriers, i.e., ΔH d ⧧, ΔS d ⧧, and ΔG d ⧧ (reactions repeated in triplicate; the errors are determined as the standard deviations of the mean). (c) Plot showing the change in rate constant at 130 °C, k d (×10–4 mol–1 dm3 s–1), across the polymer series on a log scale. (d) Plot illustrating the experimentally determined kinetic transition state barriers at 130 °C; ΔG d ⧧ determined from Eyring analysis for each of the polymers used in this study, see Table S21.CC BY · PubMed Central
4 Comparisons of transition state barriers for the PE-6 (orange) and PE-7 (purple) polyester series. (a) illustrates the entropy barriers, ΔS d ⧧ for the analogous 6- and 7-atom repeat unit polyesters and (b) illustrates the enthalpy barriers, ΔH d ⧧ for the same 6- and 7-atom repeat unit polyesters.
4 Comparisons of transition state barriers for the PE-6 (orange) and PE-7 (purple) polyester series. (a) illustrates the entropy barriers, ΔS d ⧧ for the analogous 6- and 7-atom repeat unit polyesters and (b) illustrates the enthalpy barriers, ΔH d ⧧ for the same 6- and 7-atom repeat unit polyesters.CC BY · PubMed Central
5 Correlations of catalyzed chemical recycling thermodynamic and kinetic parameters, resulting in clear linear free energy relationships. (a) Schematic illustrating primary and secondary hydroxyl chain-ends. (b) Plots of the depolymerization rate constant, k d, vs the depolymerization equilibrium constant, K d at 130 °C for PE-6a, PE-6b, PE-7a, PE-7b, and PC-6b; reactions conducted at [Zn­(Oct)2]0: [polymer]0, 1:1000. (ci) Plots of recycling activity, as assessed by TOF, against temperature for PE-6a and PE-7a. (cii) Schematic illustrating the measured kinetic and thermodynamic parameters, ΔG d ⧧ and ΔG d at 130 °C for poly­(ε-caprolactone), PE-7a, and poly­(δ-valerolactone), PE-6a. (d) Plot of the depolymerization rate constant, k d vs the depolymerization equilibrium constant K d at 130 °C for all polymers in this study. N.B. an additional sample, polylactide (racemic), is included in this data set.
5 Correlations of catalyzed chemical recycling thermodynamic and kinetic parameters, resulting in clear linear free energy relationships. (a) Schematic illustrating primary and secondary hydroxyl chain-ends. (b) Plots of the depolymerization rate constant, k d, vs the depolymerization equilibrium constant, K d at 130 °C for PE-6a, PE-6b, PE-7a, PE-7b, and PC-6b; reactions conducted at [Zn­(Oct)2]0: [polymer]0, 1:1000. (ci) Plots of recycling activity, as assessed by TOF, against temperature for PE-6a and PE-7a. (cii) Schematic illustrating the measured kinetic and thermodynamic parameters, ΔG d ⧧ and ΔG d at 130 °C for poly­(ε-caprolactone), PE-7a, and poly­(δ-valerolactone), PE-6a. (d) Plot of the depolymerization rate constant, k d vs the depolymerization equilibrium constant K d at 130 °C for all polymers in this study. N.B. an additional sample, polylactide (racemic), is included in this data set.CC BY · PubMed Central
6 Catalyzed recycling to cyclic esters of mixtures of structurally similar polyesters. (a) Shows the data obtained for recycling of a two-component polyester mixture over time and at different (isothermal) temperatures. The polymers in the blend were PE-6b and PE-7c. The reaction conditions: [Zn­(Oct)2]0:[PE-6b]0:[PE-7c]0 = 1:50:48 (1:1 polymer, by mass). Stepwise isotherms at 90 °C (black) and 190 °C (red). (b) 1H NMR spectra of the recyclate formed in reactive distillation at 90 °C (top) and 190 °C (bottom) showing the selective formation of the two different lactones. For full 1H NMR spectra and GC, see Figures S82–S85.
6 Catalyzed recycling to cyclic esters of mixtures of structurally similar polyesters. (a) Shows the data obtained for recycling of a two-component polyester mixture over time and at different (isothermal) temperatures. The polymers in the blend were PE-6b and PE-7c. The reaction conditions: [Zn­(Oct)2]0:[PE-6b]0:[PE-7c]0 = 1:50:48 (1:1 polymer, by mass). Stepwise isotherms at 90 °C (black) and 190 °C (red). (b) 1H NMR spectra of the recyclate formed in reactive distillation at 90 °C (top) and 190 °C (bottom) showing the selective formation of the two different lactones. For full 1H NMR spectra and GC, see Figures S82–S85.CC BY · PubMed Central

Verification

Claims the paper makes

0 Valid · 17 Not valid · 5 Not checked · 137 Own results and interpretations

70 more claims

Create a free account to see all 159 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 64
  • Probably not a substantial claim. 27
  • The quote only partly states this claim. 2

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

4 of 4

Citations

Cites

Cited by

See all 32

Metadata

Authors
McGuire, T. M., Ning, D., Buchard, A., & Williams, C. K.
Affiliations
  • University of Oxford (GB)
  • University of York (GB)
Corresponding author
Williams, Charlotte K.
Venue
Journal of the American Chemical Society
Published
2025-06-23
Volume
147
Issue
26
Pages
22734-22746
ISSN
  • 0002-7863 (ISSN-L)
  • 1520-5126
OpenAlex
W4411569188
Cited by
32
References
61
Citations by year
2026: 24 · 2025: 8
FWCI
7.35
Type
journal article
Language
en
Open access
Locations
  • Journal of the American Chemical Society (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (submittedVersion)
Funders
  • Engineering and Physical Sciences Research Council (EP/R027129/1, EP/S018603/1, EP/Z532782/1)
  • Royal Society (UF/160021, URF\R\221027)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
Keywords
depolymerization kinetics, linear free energy relationships, aliphatic polyesters, polycarbonate, monomer recovery, polymer separation, closed-loop recycling, transition state energy barrier

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-01, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-01 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.