The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Photocatalytic Polymerization of 3,4-Ethylenedioxythiophene over Cesium Lead Iodide Perovskite Quantum Dots
Open accessAbstract
Abstract The outstanding performance of halide perovskites in optoelectronic applications can be partly attributed to their high absorption coefficient and long carrier lifetime, which are also desirable for photocatalysts. Herein, we report that cesium lead iodide perovskite quantum dots (CsPbI3 QDs) can be used as catalysts to promote the polymerization of 2,2′,5′,2″-ter-3,4-ethylenedioxythiophene under visible light illumination while preserving the quantum dot in the desirable cubic crystal phase. Simultaneously, the generated conducting poly(3,4-ethylenedioxythiophene), PEDOT, encapsulates and stabilizes the morphology of the CsPbI3 QDs. The photocatalytic polymerization clearly depends on the concentration of the CsPbI3 QDs, and the CsPbI3 QDs maintain the desirable perovskite phase when the concentration of the QD increases. Molecular oxygen and 1,4-benzoquinone can serve as electron acceptors during the photocatalytic polymerization reaction. When molecular oxygen is used, the structure of the CsPbI3 QD transforms from cubic to orthorhombic, while usage of 1,4-benzoquinone preserves the cubic phase of CsPbI3 QD. This novel approach enables the one-step formation of CsPbI3/PEDOT composite, which could be promising for the preparation of novel optoelectronic materials and high performance devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Nedelcu, G., Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Grotevent, M. J., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02404 · Cited by 2,356
Reduction potentials of one-electron couples involving free radicals in aqueous solution
Wardman, P. (1989) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555843 · Cited by 2,123
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Highly narrowband perovskite single-crystal photodetectors enabled by surface-charge recombination
Fang, Y., Dong, Q., Shao, Y., Yuan, Y., & Huang, J. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.156 · Cited by 1,470
Organohalide lead perovskites for photovoltaic applications
Gao, P., Grätzel, M., & Nazeeruddin, M. K. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00942h · Cited by 1,410
Nontemplate Synthesis of CH3NH3PbBr3 Perovskite Nanoparticles
Schmidt, L. C., Pertegás, A., González-Carrero, S., Malinkiewicz, O., Agouram, S., Mínguez Espallargas, G., Bolink, H. J., Galian, R. E., & Pérez-Prieto, J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja4109209 · Cited by 1,327
A CsPbBr3 Perovskite Quantum Dot/Graphene Oxide Composite for Photocatalytic CO2 Reduction
Xu, Y.-F., Yang, M.-Z., Chen, B.-X., Wang, X.-D., Chen, H.-Y., Kuang, D.-B., & Su, C.-Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b00489 · Cited by 1,180
Electrochemistry of Poly(3,4‐alkylenedioxythiophene) Derivatives
Groenendaal, L., Zotti, G., Aubert, P. ‐., Waybright, S. M., & Reynolds, J. R. (2003) · Advanced Materials · doi:10.1002/adma.200300376 · Cited by 944
Efficient and Stable White LEDs with Silica‐Coated Inorganic Perovskite Quantum Dots
Sun, C., Zhang, Y., Ruan, C., Yin, C., Wang, X., Wang, Y., & Yu, W. W. (2016) · Advanced Materials · doi:10.1002/adma.201603081 · Cited by 934
Pan, A., He, B., Fan, X., Liu, Z., Urban, J. J., Alivisatos, A. P., He, L., & Liu, Y. (2016) · ACS Nano · doi:10.1021/acsnano.6b03863 · Cited by 900
Tong, Y., Bladt, E., Aygüler, M. F., Manzi, A., Milowska, K. Z., Hintermayr, V. A., Docampo, P., Bals, S., Urban, A. S., Polavarapu, L., et al. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605909 · Cited by 781
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Conducting polymer nanostructures for photocatalysis under visible light
Ghosh, S., Kouamé, N. A., Ramos, L., Remita, S., Dazzi, A., Deniset-Besseau, A., Beaunier, P., Goubard, F., Aubert, P.-H., & Remita, H. (2015) · Nature Materials · doi:10.1038/nmat4220 · Cited by 685
Tuning the Light Emission Properties by Band Gap Engineering in Hybrid Lead Halide Perovskite
D’Innocenzo, V., Srimath Kandada, A. R., De Bastiani, M., Gandini, M., & Petrozza, A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja511198f · Cited by 623
Park, S., Chang, W. J., Lee, C. W., Park, S., Ahn, H.-Y., & Nam, K. T. (2016) · Nature Energy · doi:10.1038/nenergy.2016.185 · Cited by 610
Ultrafast Interfacial Electron and Hole Transfer from CsPbBr3 Perovskite Quantum Dots
Wu, K., Liang, G., Shang, Q., Ren, Y., Kong, D., & Lian, T. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08520 · Cited by 588
Huang, S., Li, Z., Kong, L., Zhu, N., Shan, A., & Li, L. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13101 · Cited by 581
Efficient Luminescence from Perovskite Quantum Dot Solids
Kim, Y., Yassitepe, E., Voznyy, O., Comin, R., Walters, G., Gong, X., Kanjanaboos, P., Nogueira, A. F., & Sargent, E. H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09084 · Cited by 555
Metal halide perovskite light emitters
Kim, Y.-H., Cho, H., & Lee, T.-W. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1607471113 · Cited by 549
Huang, H., Chen, B., Wang, Z., Hung, T. F., Susha, A. S., Zhong, H., & Rogach, A. L. (2016) · Chemical Science · doi:10.1039/c6sc01758d · Cited by 540
Raja, S. N., Bekenstein, Y., Koc, M. A., Fischer, S., Zhang, D., Lin, L., Ritchie, R. O., Yang, P., & Alivisatos, A. P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09443 · Cited by 521
Roncali, J., Blanchard, P., & Frère, P. (2005) · J. Mater. Chem. · doi:10.1039/b415481a · Cited by 449
Optical Properties of Photovoltaic Organic–Inorganic Lead Halide Perovskites
Green, M. A., Jiang, Y., Soufiani, A. M., & Ho-Baillie, A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01865 · Cited by 414
Palazon, F., Akkerman, Q. A., Prato, M., & Manna, L. (2016) · ACS Nano · doi:10.1021/acsnano.5b06536 · Cited by 369
Rational Strategies for Efficient Perovskite Solar Cells
Seo, J., Noh, J. H., & Seok, S. I. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00444 · Cited by 361
Emanuelsson, R., Sterby, M., Strømme, M., & Sjödin, M. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b00159 · Cited by 296
Band alignment of the hybrid halide perovskites CH3NH3PbCl3, CH3NH3PbBr3and CH3NH3PbI3
Butler, K. T., Frost, J. M., & Walsh, A. (2015) · Materials Horizons · doi:10.1039/c4mh00174e · Cited by 287
Photo-stability of CsPbBr3 perovskite quantum dots for optoelectronic application
Chen, J., Liu, D., Al-Marri, M. J., Nuuttila, L., Lehtivuori, H., & Zheng, K. (2016) · Science China Materials · doi:10.1007/s40843-016-5123-1 · Cited by 255
Structure‐Tuned Lead Halide Perovskite Nanocrystals
Hassan, Y., Song, Y., Pensack, R. D., Abdelrahman, A. I., Kobayashi, Y., Winnik, M. A., & Scholes, G. D. (2016) · Advanced Materials · doi:10.1002/adma.201503461 · Cited by 249
Sharenko, A., & Toney, M. F. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10723 · Cited by 242
Li, Y., & Hong, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05167c · Cited by 92
Morphology‐Controlled Synthesis of Organometal Halide Perovskite Inverse Opals
Chen, K., & Tüysüz, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506367 · Cited by 78
Self-citationMalmström, J., Nieuwoudt, M. K., Strover, L. T., Hackett, A. J., Laita, O., Brimble, M. A., Williams, D. E., & Travaš‐Sejdić, J. (2013) · Macromolecules · doi:10.1021/ma400803j · Cited by 58
Giansante, C., Mastria, R., Lerario, G., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401841 · Cited by 52
Schünemann, S., Chen, K., Brittman, S., Garnett, E. C., & Tüysüz, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09227 · Cited by 43
Self-citationPreparation of Waterproof Organometal Halide Perovskite Photonic Crystal Beads
Chen, K., Schünemann, S., & Tüysüz, H. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702556 · Cited by 35
Self-citation
Cited by
Wei, Y., Cheng, Z., & Lin, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00740c · Cited by 1,206
Hollow Nanostructures for Photocatalysis: Advantages and Challenges
Xiao, M., Wang, Z., Lyu, M., Luo, B., Wang, S., Liu, G., Cheng, H., & Wang, L. (2019) · Advanced Materials · doi:10.1002/adma.201801369 · Cited by 782
Lead halide perovskites for photocatalytic organic synthesis
Zhu, X., Lin, Y., San Martin, J., Sun, Y., Zhu, D., & Yan, Y. (2019) · Nature Communications · doi:10.1038/s41467-019-10634-x · Cited by 455
Stable and Highly Efficient Photocatalysis with Lead‐Free Double‐Perovskite of Cs2AgBiBr6
Zhang, Z., Liang, Y., Huang, H., Liu, X., Li, Q., Chen, L., & Xu, D. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900658 · Cited by 431
Lead-Halide Perovskites for Photocatalytic α-Alkylation of Aldehydes
Zhu, X., Lin, Y., Sun, Y., Beard, M. C., & Yan, Y. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b08720 · Cited by 361
Metadata
- Authors
- Chen, K., Deng, X., Dodekatos, G., & Tüysüz, H.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-08-23
- Volume
- 139
- Issue
- 35
- Pages
- 12267-12273
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2744124158
- Cited by
- 265
- References
- 45
- FWCI
- 9.51
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
