The DOI matches its Crossref record.
Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder
Abstract
The electrochemical properties of sulfur cathodes based on commercially available sulfur powder (S) and water-soluble binder have been investigated. The mixture of styrene butadiene rubber (SBR) and sodium carboxyl methyl cellulose (CMC) is used as the binder. Compared with conventional poly(vinylidene fluoride) (PVDF) binder, the SBR–CMC binder significantly improves cycling performance of the sulfur cathode. A high specific capacity of 580 mA h g –1 after 60 cycles has been achieved. Studies on the electrode slurries show that the SBR–CMC mixture is not only a high adhesion agent but also a strong dispersion medium, which favors the uniform distribution between insulating sulfur and conductive carbon black (CB) and ensures a good electrical contact, leading to a high sulfur utilization. Furthermore, our experiments show that the improvement in cyclability is ascribed to structural stability of the sulfur cathode promoted by the SBR–CMC binder during charge/discharge cycles due to the combined effects of homogeneous distribution of the S and CB particles in the composite cathode, the low electrolyte uptake, and the suppressed agglomeration of Li 2 S.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
Deng, Z., Zhang, Z., Lai, Y., Liu, J., Li, J., & Liu, Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.026304jes · Cited by 674
Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00640g · Cited by 640
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402290 · Cited by 554
Lithium/sulfur batteries with high specific energy: old challenges and new opportunities
Song, M.-K., Cairns, E. J., & Zhang, Y. (2013) · Nanoscale · doi:10.1039/c2nr33044j · Cited by 522
Li, Z., Yuan, L., Yi, Z., Sun, Y., Liu, Y., Jiang, Y., Shen, Y., Xin, Y., Zhang, Z., & Huang, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301473 · Cited by 481
Self-citationFrom lithium to sodium: Cell chemistry of room temperature sodium–air and sodium–sulfur batteries
Adelhelm, P., Hartmann, P., Bender, C. L., Busche, M., Eufinger, C., & Janek, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.105 · Cited by 478
A Review of the Design of Advanced Binders for High‐Performance Batteries
Zou, F., & Manthiram, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002508 · Cited by 465
A Review of Functional Binders in Lithium–Sulfur Batteries
Yuan, H., Huang, J., Peng, H., Titirici, M., Xiang, R., Chen, R., Liu, Q., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802107 · Cited by 438
Small things make a big difference: binder effects on the performance of Li and Na batteries
Chou, S.-L., Pan, Y., Wang, J.-Z., Liu, H.-K., & Dou, S.-X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02475c · Cited by 428
A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance
Song, M.-K., Zhang, Y., & Cairns, E. J. (2013) · Nano Letters · doi:10.1021/nl402793z · Cited by 427
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Polymers in Lithium‐Ion and Lithium Metal Batteries
Li, J., Cai, Y., Wu, H., Yu, Z., Yan, X., Zhang, Q., Gao, T. Z., Liu, K., Jia, X., & Bao, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003239 · Cited by 348
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Zhang, S. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002207jes · Cited by 297
Confined selenium within porous carbon nanospheres as cathode for advanced Li–Se batteries
Li, Z., Yuan, L., Yi, Z., Liu, Y., & Huang, Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.07.012 · Cited by 284
Self-citationShi, C., Zhang, P., Chen, L., Yang, P., & Zhao, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.142 · Cited by 276
Metadata
- Authors
- He, M., Yuan, L.-X., Zhang, W.-X., Hu, X.-L., & Huang, Y.-H.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-07-19
- Volume
- 115
- Issue
- 31
- Pages
- 15703-15709
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2335599691
- Cited by
- 226
- References
- 0
- FWCI
- 10.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.