CoChat

Adsorption Behavior of Perfluorinated Sulfonic Acid Ionomer on Highly Graphitized Carbon Nanofibers and Their Thermal Stabilities

The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.

Abstract

A systematic adsorption study of perfluorinated sulfonic acid Nafion ionomer on ribbon-type highly graphitized carbon nanofibers (CNFs) was carried out using fluorine-19 nuclear magnetic resonance spectroscopy. On the basis of the values obtained for the equilibrium constant ( K eq, derived from Langmuir isotherm), the ionomer has varying affinities for CNFs ( K eq between 5 and 22) as compared to Vulcan ( K eq = 18), depending on surface treatments. However, the interactions are most likely governed by different adsorption mechanisms depending on hydrophilicity/hydrophobicity of the adsorbent carbon. The ionomer is probably adsorbed via the polar sulfonic group on hydrophilic Vulcan, whereas it is adsorbed primarily via hydrophobic −CF 2 – backbone on the highly hydrophobic pristine CNFs. Ionomer adsorption behavior is gradually altered from apolar to polar group adsorption for the acid-modified CNFs of decreasing hydrophobicity. This is indicated by the initial decrease and then increase in the value of K eq with the increasing strength of the acid treatment. The corresponding carbon–ionomer composite also showed varying thermal stability depending on Nafion orientation. The specific maximum surface coverage (Γ Smax ) of the CNFs is 1 order of magnitude higher than that of Vulcan. The large discrepancy is due to the fact that the ionomers are inaccessible to the internal surface area of Vulcan with high microporosity.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/jp501088d

Cites

41 of 41 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 41 references

Research works printed but not linked: 1

  1. Wilson, M. S.,Membrane catalyst layer for fuel cells. U.S. Patent No. 5,234,777 (1993) .

Cited by

Metadata

Authors
Andersen, S. M., Borghei, M., Dhiman, R., Ruiz, V., Kauppinen, E., & Skou, E.
Affiliations
  • University of Southern Denmark (DK)
  • Aalto University (FI)
Corresponding author
Andersen, Shuang Ma
Venue
The Journal of Physical Chemistry C
Published
2014-05-12
Volume
118
Issue
20
Pages
10814-10823
ISSN
  • 1932-7447 (ISSN-L)
  • 1932-7455
OpenAlex
W2331385187
Cited by
55
References
41
Citations by year
2026: 5 · 2025: 6 · 2024: 4 · 2023: 3 · 2022: 7 · 2021: 4 · 2020: 4 · 2019: 1 · 2018: 6 · 2017: 6 · 2016: 3 · 2015: 4 · 2014: 2
FWCI
2.66
Type
journal article
Language
en
Open access
closed
Locations
  • The Journal of Physical Chemistry C (publishedVersion)
  • University of Southern Denmark Research Portal (University of Southern Denmark) (submittedVersion)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Materials Science › Materials Chemistry › Carbon Nanotubes in Composites
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
Keywords
perfluorinated sulfonic acid ionomers, Nafion, carbon nanofibers, graphitized carbon, ionomer adsorption, Langmuir isotherm, adsorption equilibrium constant, adsorption mechanism, hydrophobicity, acid treatment, surface modification, thermal stability, surface coverage, Vulcan carbon

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.