Gram Scale Synthesis of Pure Ceramic Nanoparticles by Laser Ablation in Liquid
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
Scale-up criteria of laser ablation in the liquid phase with nanosecond pulses is studied for efficient generation of pure ceramic nanoparticles in an aqueous environment. Besides high laser fluence and low height of the applied liquid layer, specific pulse overlap and defined laser repetition rate are required for significant enhancement in nanoparticle productivity. The ablation rate increases by 350% by reducing the liquid film from 8 mm to 2.5 mm owing to reduced absorption and scattering of the incident laser beam by previously ablated nanoparticles. The controlled interpulse distance yields a further increase in material removal rate by another 300% compared to machining in the pulse overlap mode. The residual cavitation bubble from the previous laser pulse and the dispersed nanoparticle interaction with the following laser pulse and optimized temperature gradient in the lattice of the target are assumed to alter productivity. This hypothesis is confirmed by varying the repetition rate with equal laser fluence and pulse overlap, which causes a drastic rise in nanoparticle productivity by a factor of 65. A maximum corundum nanoparticle productivity of 1.3 g/h with Feret particle size of 30 nm is gained by 18.5 W of focused laser power at 4 kHz of repetition rate, providing 125 μm interpulse distance and liquid flow.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Scale-up production to grams per hour has been demonstrated, making it appropriate for industrial applications20–22.”
From Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications (2022) · cites this paper as [21]
In the citing paper
“Meanwhile, PLAL produces NPs in a scale of tens to hundreds of milligrams, which has been extended achieving g h À1 productivities for other metallic 52 and ceramic NPs, 53 and with a record of 8 grams per hour for Pt NPs produced by Waag et al. 54 in 2021.”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [53]
In the citing paper
“Meanwhile, PLAL produces NPs in a scale of tens to hundreds of milligrams, which has been extended achieving g h À1 productivities for other metallic 52 and ceramic NPs, 53 and with a record of 8 grams per hour for Pt NPs produced by Waag et al. 54 in 2021.”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [53]
In the citing paper
“It has been shown that there is no major discrepancy in the productivity between 5, 10, 15, and 30 minute ablation time when using a flow chamber.53”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [53]
In the citing paper
“An optimum liquid flow rate is achieved when the generated NPs are completely removed from the ablation area, confirmed by monitoring the productivity with increasing flow rates.53”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [53]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Green Chemistry: Theory and Practice
Anastas, P. T., & Warner, J. C. (1998) · Medical Entomology and Zoology · Cited by 8,599
Dahl, J. A., Maddux, B. L. S., & Hutchison, J. E. (2007) · Chemical Reviews · doi:10.1021/cr050943k · Cited by 1,284
Surface Energies and Thermodynamic Phase Stability in Nanocrystalline Aluminas
McHale, J. M., Auroux, A., Perrotta, A. J., & Navrotsky, A. (1997) · Science · doi:10.1126/science.277.5327.788 · Cited by 946
Formation of Gold Nanoparticles by Laser Ablation in Aqueous Solution of Surfactant
Mafuné, Kohno, J.-Y., Takeda, Y., Kondow, T., & Sawabe, H. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp0037091 · Cited by 630
Noack, J., & Vogel, A. (1999) · IEEE Journal of Quantum Electronics · doi:10.1109/3.777215 · Cited by 618
Synthesis of colloidal nanoparticles during femtosecond laser ablation of gold in water
Kabashin, A. V., & Meunier, M. (2003) · Journal of Applied Physics · doi:10.1063/1.1626793 · Cited by 568
Pulsed laser ablation of solids: transition from normal vaporization to phase explosion
Bulgakova, N. M., & Bulgakov, A. V. (2001) · Applied Physics A Materials Science & Processing · doi:10.1007/s003390000686 · Cited by 549
Miotello, A., & Kelly, R. (1999) · Applied Physics A: Materials Science & Processing · doi:10.1007/s003390051357 · Cited by 408
Comments on explosive mechanisms of laser sputtering
Kelly, R., & Miotello, A. (1996) · Applied Surface Science · doi:10.1016/0169-4332(95)00481-5 · Cited by 313
Selected problems of laser ablation theory
Anisimov, S. I., & Luk'yanchuk, B. S. (2002) · Physics-Uspekhi · doi:10.1070/pu2002v045n03abeh000966 · Cited by 312
Cited by
Items 201–247 of 247
Metal clusters trapped on opaque substrate particles prepared using pulsed laser ablation in liquid
Takeda, Y. (2022) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ac7490 · Cited by 3
Nastulyavichus, A., Kudryashov, S. I., Emelyanenko, A. M., & Boinovich, L. B. (2023) · Коллоидный журнал · doi:10.31857/s0023291223600037 · Cited by 3
Zastosowanie nanotechnologii w ochronie przeciwpożarowej
Łukaszczuk, P. (2016) · Bezpieczeństwo i Technika Pożarnicza · doi:10.12845/bitp.42.2.2016.9 · Cited by 3
Zakletskii, Z. A., Moryakov, I. V., Berezhetskaya, N. K., Knyazev, A. V., Kuznetsov, S. V., Воронов, В. В., Малахов, Д. В., Тактакишвили, И. М., Тарасова, Н. М., Gusein-zade, N. G., et al. (2025) · Plasma Chemistry and Plasma Processing · doi:10.1007/s11090-025-10593-w · Cited by 2
Laser processing technologies for solar-driven interfacial evaporation
Yang, Z., Song, Z., Zhao, Y., Zhang, J., Wang, B., Zhao, F., Zhao, Y., Cheng, H., Jiang, L., & Qu, L. (2026) · Nano Research · doi:10.26599/nr.2026.94908393 · Cited by 2
Preparation of InP Nanoparticles by Laser Ablation in Liquid
加賀谷, 俊., Ehara, Y., Kitamoto, Y., Funakubo, H., Hara, M., Yamazaki, Y., Odawara, O., & Wada, H. (2012) · The Review of Laser Engineering · doi:10.2184/lsj.40.2_117 · Cited by 2
Laser-induced nanoparticles in electroanalysis: Review
(2021) · Functional materials · doi:10.15407/fm28.02.210 · Cited by 2
Alharbi, A. M., Azhar, A. R., Ahmed, N. M., Azman, N. Z. N., Almessiere, M. A., & Mahmood, M. S. (2024) · International Journal of Modern Physics B · doi:10.1142/s021797922530004x · Cited by 4
Laser Generation and Printing of Nanoparticles
Barchanski, A., Evlyukhin, A. B., Koroleva, A., Reinhardt, C., Sajti, C. L., Zywietz, U., & Chichkov, B. N. (2014) · Springer series in materials science · doi:10.1007/978-3-319-05987-7_5 · Cited by 2
Self-citationLaser Nanostructuring and Three-Dimensional Ink-Jet Printing of Nanocoatings
Zayarny, D. A., Ivanova, A. K., Ионин, А. А., Хмельницкий, Р. А., Klevkov, Y. V., Kudryashov, S. I., Melnik, N. N., Nastulyavichus, A., Rudenko, A. A., Saraeva, I. N., et al. (2018) · Bulletin of the Russian Academy of Sciences Physics · doi:10.3103/s1062873818040238 · Cited by 2
Monsa, Y., Lerner, N., Danon, A., & Bar, I. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c07028 · Cited by 2
Takeda, Y., Toyama, N., & Egashira, K. (2022) · Surface Science · doi:10.1016/j.susc.2022.122199 · Cited by 2
Nanosecond Laser Induced Surface Structuring of Cadmium after Ablation in Air and Propanol Ambient
Umm-i-Kalsoom, Ali, N., Bashir, S., Akbar, S., Rafique, M. S., Alshehri, A. M., Begum, N., Iqbal, T., & Anwar, A. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms232112749 · Cited by 2
Selvaraj, A., Parangusan, H., Vikraman, D., Nichelson, A., Bose, R., Theerthagiri, J., Alfantazi, A. M., Kim, H., & Karuppasamy, K. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13379-4.00005-5 · Cited by 4
Laser-matter Interaction with Submerged Samples
Mariella, R. P., Rubenchik, A. M., Norton, M. A., Donohue, G., & Roberts, Κ. (2010) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/978421 · Cited by 2
Ma, J.-W., Cao, X.-K., Han, D., Wang, J., & Jiang, W. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.107211 · Cited by 1
Further Sustainable and/or Unconventional Low-temperature Wet-chemical Synthetic Methods
Barbon, F., Tajoli, F., Spolaore, F., & Gross, S. (2024) · Royal Society of Chemistry eBooks · doi:10.1039/9781839165757-00315 · Cited by 1
Torres–Mendieta, R., Abdallah, S., Ruiz-Fresneda, M. Á., Merroun, M. L., & Černík, M. (2025) · Green Chemistry · doi:10.1039/d4gc06174h · Cited by 1
Vilas, A. M., Fernández‐Arias, M., Boutinguiza, M., Rius, D. R., Solla, E. L., Vilella, T., del Val, J., Riveiro, A., Gil, J., & Pou, J. (2025) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2025.100735 · Cited by 1
New method for fabricating nano oxide materials
El-Hofy, M., El-Roby, M. G., & Elkhatib, M. (2015) · Advances in Natural Sciences Nanoscience and Nanotechnology · doi:10.1088/2043-6262/6/3/035018 · Cited by 1
Thermally assisted nanosecond laser generation of ferric nanoparticles
Kuršelis, K., Kozheshkurt, V., Kiyan, R. V., Chichkov, B. N., & Sajti, L. (2018) · Applied Physics Letters · doi:10.1063/1.5021763 · Cited by 1
Self-citationMorphology and structure of TixOynanoparticles generated by femtosecond laser ablation in water
Donėlienė, J., Rudzikas, M., Rades, S., Dörfel, I., Peplinski, B., Sahre, M., Pellegrino, F., Maurino, V., Ulbikas, J., Galdikas, A., et al. (2018) · Materials Research Express · doi:10.1088/2053-1591/aaba56 · Cited by 1
Kawasaki, M. (2012) · The Review of Laser Engineering · doi:10.2184/lsj.40.2_88 · Cited by 2
Preparation of Functional Nanoparticles by Laser Process in Liquid and Their Optical Applications
Wada, H. (2022) · Springer eBooks · doi:10.1007/978-981-16-7798-4_12 · Cited by 1
Nanosecond pulsed laser-plasma interaction and its applications
Singh, R. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-89930-7.00010-8 · Cited by 4
Tan, J., Liu, J., Yu, P., Yang, L., Sun, L., Li, J., Li, X., & Zhang, Q. (2025) · Optics & Laser Technology · doi:10.1016/j.optlastec.2025.113125 · Cited by 1
Synthesis of colloidal nanomaterials through femtosecond laser ablation
Torres–Mendieta, R. (2016) · Tesis Doctorals en Xarxa (Consorci de Serveis Universitaris de Catalunya) · doi:10.6035/14104.2016.518487 · Cited by 2
Palma, M., & Isabel, M. (2011) · Americanae (AECID Library)
Rao, S. V., Hamad, S., & Podagatlapalli, G. K. (2016) · Advances in materials science and engineering · doi:10.1201/9781315374628-12 · Cited by 1
Top-down Synthesized CdSe Nanoparticles for Electroanalytical and Labeling Applications
Zholudov, Y. T., Aljebur, A. S., & Kukoba, A. (2019) · IEEE International Conference on Electronics and Nanotechnology (ELNANO) · doi:10.1109/elnano.2019.8783897
Development of Effectual Substrates for SERS by Nanostructures-on flexible surfaces
Humud, H. R., & Moaen, F. J. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2114/1/012084
Optical properties of copper naphthalocyanine nanoparticles prepared by laser ablation in liquid
Omura, K., Kitamoto, Y., Hara, M., & Wada, H. (2022) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ac4e30
Lafontaine, E., & Comet, M. (2016) · Wiley eBooks · doi:10.1002/9781119329947.biblio
Martínez-García, P., Arcos, C. G., Rebollar, E., de Nalda, R., Solana, I., Vega, J. F., Sanz, M., & Gálvez, Ó. (2024) · High-Power Laser Ablation (HPLA) · doi:10.1117/12.3012624
Nonoxide materials produced by pulsed laser process for photocatalytic remediation
Prabhu, S. M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13379-4.00009-2
Study of magnetocaloric nanoparticles produced by laser ablation in liquids
Costa, J. M. B. P. D. (2021) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.34626/23n2-bd62
Synthèse de nanoparticules par ablation laser en liquide et étude de leurs propriétés optiques
Diouf, M. (2012) · theses.fr (ABES) · doi:10.70675/fb7b2c24ze585z4cbczb9c7z41b878da00ee · Cited by 2
Resano-Garcia, A. (2016) · theses.fr (ABES) · doi:10.70675/c8ee970aza492z4c68z9ff1ze0a35e514197 · Cited by 3
Synthesis of novel nanomaterials for biomedical applications by ultrashort laser ablation in liquids
Maximova, K. A. (2014) · theses.fr (ABES) · doi:10.70675/1de8052fze528z416cza6ecz57c22a83617f
Clusters et molécules dans les plasmas générés par laser : cinétique et thermodynamique
Chemin, A. (2021) · theses.fr (ABES) · doi:10.70675/2a78f90azd0b3z4aabzbb33z8cba1f48ad05
Miao, R., Roso, M., Jin, L., Bortolussi, M., Marotta, E., & Amendola, V. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c05452
Bérard, R., Altakroury, A. R., Gatsa, O., Fu, Z., Gökce, B., & Bulgakov, A. V. (2026) · Beilstein Journal of Nanotechnology · doi:10.3762/bxiv.2026.32.v1
Bahari, H.-R., Taylan, U., Arık, M. N., Yıldırım, C., & Ortaç, B. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7593163
Metadata
- Authors
- Sajti, C. L., Sattari, R., Chichkov, B. N., & Barcikowski, S.
- Affiliations
- Laser Zentrum Hannover (DE)
- Corresponding author
- Barcikowski, Stephan
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-01-25
- Volume
- 114
- Issue
- 6
- Pages
- 2421-2427
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W1982884613
- Cited by
- 242
- References
- 37
- Citations by year
- 2026: 4 · 2025: 15 · 2024: 15 · 2023: 12 · 2022: 16 · 2021: 22 · 2020: 14 · 2019: 12 · 2018: 18 · 2017: 19 · 2016: 17 · 2015: 10 · 2014: 16 · 2013: 16 · 2012: 21
- FWCI
- 9.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The Journal of Physical Chemistry C (publishedVersion)
- Funders
- Deutsche Forschungsgemeinschaft
- Bundesministerium für Bildung und Forschung
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Ultrasound and Cavitation Phenomena
- Keywords
- laser ablation in liquid, ceramic nanoparticles, gram-scale synthesis, nanosecond laser pulses, laser repetition rate, pulse overlap, ablation rate, liquid film thickness, cavitation bubbles, aqueous synthesis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.