Gram Scale Synthesis of Pure Ceramic Nanoparticles by Laser Ablation in Liquid
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
Scale-up criteria of laser ablation in the liquid phase with nanosecond pulses is studied for efficient generation of pure ceramic nanoparticles in an aqueous environment. Besides high laser fluence and low height of the applied liquid layer, specific pulse overlap and defined laser repetition rate are required for significant enhancement in nanoparticle productivity. The ablation rate increases by 350% by reducing the liquid film from 8 mm to 2.5 mm owing to reduced absorption and scattering of the incident laser beam by previously ablated nanoparticles. The controlled interpulse distance yields a further increase in material removal rate by another 300% compared to machining in the pulse overlap mode. The residual cavitation bubble from the previous laser pulse and the dispersed nanoparticle interaction with the following laser pulse and optimized temperature gradient in the lattice of the target are assumed to alter productivity. This hypothesis is confirmed by varying the repetition rate with equal laser fluence and pulse overlap, which causes a drastic rise in nanoparticle productivity by a factor of 65. A maximum corundum nanoparticle productivity of 1.3 g/h with Feret particle size of 30 nm is gained by 18.5 W of focused laser power at 4 kHz of repetition rate, providing 125 μm interpulse distance and liquid flow.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Scale-up production to grams per hour has been demonstrated, making it appropriate for industrial applications20–22.”
From Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications (2022) · cites this paper as [21]
In the citing paper
“Meanwhile, PLAL produces NPs in a scale of tens to hundreds of milligrams, which has been extended achieving g h À1 productivities for other metallic 52 and ceramic NPs, 53 and with a record of 8 grams per hour for Pt NPs produced by Waag et al. 54 in 2021.”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [53]
In the citing paper
“Meanwhile, PLAL produces NPs in a scale of tens to hundreds of milligrams, which has been extended achieving g h À1 productivities for other metallic 52 and ceramic NPs, 53 and with a record of 8 grams per hour for Pt NPs produced by Waag et al. 54 in 2021.”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [53]
In the citing paper
“It has been shown that there is no major discrepancy in the productivity between 5, 10, 15, and 30 minute ablation time when using a flow chamber.53”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [53]
In the citing paper
“An optimum liquid flow rate is achieved when the generated NPs are completely removed from the ablation area, confirmed by monitoring the productivity with increasing flow rates.53”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [53]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Green Chemistry: Theory and Practice
Anastas, P. T., & Warner, J. C. (1998) · Medical Entomology and Zoology · Cited by 8,599
Dahl, J. A., Maddux, B. L. S., & Hutchison, J. E. (2007) · Chemical Reviews · doi:10.1021/cr050943k · Cited by 1,284
Surface Energies and Thermodynamic Phase Stability in Nanocrystalline Aluminas
McHale, J. M., Auroux, A., Perrotta, A. J., & Navrotsky, A. (1997) · Science · doi:10.1126/science.277.5327.788 · Cited by 946
Formation of Gold Nanoparticles by Laser Ablation in Aqueous Solution of Surfactant
Mafuné, Kohno, J.-Y., Takeda, Y., Kondow, T., & Sawabe, H. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp0037091 · Cited by 630
Noack, J., & Vogel, A. (1999) · IEEE Journal of Quantum Electronics · doi:10.1109/3.777215 · Cited by 618
Synthesis of colloidal nanoparticles during femtosecond laser ablation of gold in water
Kabashin, A. V., & Meunier, M. (2003) · Journal of Applied Physics · doi:10.1063/1.1626793 · Cited by 568
Pulsed laser ablation of solids: transition from normal vaporization to phase explosion
Bulgakova, N. M., & Bulgakov, A. V. (2001) · Applied Physics A Materials Science & Processing · doi:10.1007/s003390000686 · Cited by 549
Miotello, A., & Kelly, R. (1999) · Applied Physics A: Materials Science & Processing · doi:10.1007/s003390051357 · Cited by 408
Comments on explosive mechanisms of laser sputtering
Kelly, R., & Miotello, A. (1996) · Applied Surface Science · doi:10.1016/0169-4332(95)00481-5 · Cited by 313
Selected problems of laser ablation theory
Anisimov, S. I., & Luk'yanchuk, B. S. (2002) · Physics-Uspekhi · doi:10.1070/pu2002v045n03abeh000966 · Cited by 312
Cited by
Laser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344
Self-citationNanomaterials via Laser Ablation/Irradiation in Liquid: A Review
Zeng, H., Du, X., Singh, S. C., Kulinich, S. A., Yang, S., He, J., & Cai, W. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102295 · Cited by 966
Amendola, V., & Meneghetti, M. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42895d · Cited by 758
Theerthagiri, J., Karuppasamy, K., Lee, S. J., Shwetharani, R., Kim, H.-S., Pasha, S. K. K., Ashokkumar, M., & Choi, M. Y. (2022) · Light: Science & Applications · doi:10.1038/s41377-022-00904-7 · Cited by 461
Pulsed laser ablation in liquid for micro-/nanostructure generation
Yan, Z., & Chrisey, D. B. (2012) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2012.04.004 · Cited by 365
Amendola, V., Amans, D., Ishikawa, Y., Koshizaki, N., Scirè, S., Compagnini, G., Reichenberger, S., & Barcikowski, S. (2020) · Chemistry – A European Journal · doi:10.1002/chem.202000686 · Cited by 354
Self-citationXiao, J., Liu, P., Wang, C. X., & Yang, G. W. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.02.004 · Cited by 352
Nyabadza, A., McCarthy, É., Makhesana, M., Heidarinassab, S., Plouze, A., Vazquez, M., & Brabazon, D. (2023) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2023.103010 · Cited by 318
Advanced nanoparticle generation and excitation by lasers in liquids
Barcikowski, S., & Compagnini, G. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp90132c · Cited by 287
Self-citationStreubel, R., Barcikowski, S., & Gökce, B. (2016) · Optics Letters · doi:10.1364/ol.41.001486 · Cited by 283
Self-citationPulsed Laser in Liquids Made Nanomaterials for Catalysis
Forsythe, R. C., Cox, C. P., Wilsey, M. K., & Müller, A. M. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01069 · Cited by 259
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Soft Bioelectronics Based on Nanomaterials
Cho, K. W., Sunwoo, S.-H., Hong, Y. J., Koo, J. H., Kim, J. H., Baik, S., Hyeon, T., & Kim, D.-H. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00531 · Cited by 244
Amendola, V., Riello, P., & Meneghetti, M. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp109371m · Cited by 232
Sportelli, M. C., Izzi, M., Volpe, A., Clemente, M., Picca, R. A., Ancona, A., Lugarà, P. M., Palazzo, G., & Cioffi, N. (2018) · Antibiotics · doi:10.3390/antibiotics7030067 · Cited by 207
Laser nano-manufacturing – State of the art and challenges
Li, L., Hong, M., Schmidt, M., Zhong, M., Malshe, A., Huis in’tVeld, B., & Kovalenko, V. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.05.005 · Cited by 202
Calabro, R. L., Yang, D.-S., & Kim, D. Y. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.04.113 · Cited by 195
On Nanoparticle Formation by Laser Ablation in Liquids
Itina, T. E. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1090944 · Cited by 179
Dynamical study of bubble expansion following laser ablation in liquids
Lam, J., Lombard, J., Dujardin, C., Ledoux, G., Merabia, S., & Amans, D. (2016) · Applied Physics Letters · doi:10.1063/1.4942389 · Cited by 174
Pilot-scale synthesis of metal nanoparticles by high-speed pulsed laser ablation in liquids
Streubel, R., Bendt, G., & Gökce, B. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/20/205602 · Cited by 150
Zimbone, M., Buccheri, M. A., Cacciato, G., Sanz, R., Rappazzo, G., Boninelli, S., Reitano, R., Romano, L., Privitera, V., & Grimaldi, M. G. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.10.031 · Cited by 149
γ-Al 2 O 3 nanoparticles synthesised by pulsed laser ablation in liquids: a plasma analysis
Lam, J., Amans, D., Chaput, F., Diouf, M., Ledoux, G., Mary, N., Masenelli‐Varlot, K., Motto‐Ros, V., & Dujardin, C. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp53748j · Cited by 160
Zhang, D., Liu, J., Li, P., Tian, Z., & Liang, C. (2017) · ChemNanoMat · doi:10.1002/cnma.201700079 · Cited by 131
Khairani, I. Y., Mínguez-Vega, G., Doñate-Buendía, C., & Gökce, B. (2023) · Physical Chemistry Chemical Physics · doi:10.1039/d3cp01214j · Cited by 130
Jendrzej, S., Gökce, B., Epple, M., & Barcikowski, S. (2017) · ChemPhysChem · doi:10.1002/cphc.201601139 · Cited by 129
Self-citationManshina, A., Tumkin, I. I., Khairullina, E. M., Mizoshiri, M., Ostendorf, A., Kulinich, S. A., Makarov, S., Kuchmizhak, A. A., & Gurevich, E. L. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202405457 · Cited by 125
Shih, C.-Y., Shugaev, M. V., Wu, C., & Zhigilei, L. V. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b02301 · Cited by 122
Kalus, M.-R., Bärsch, N., Streubel, R., Gökce, E., Barcikowski, S., & Gökce, B. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp07011f · Cited by 109
Self-citationIntartaglia, R., Bagga, K., Scotto, M., Diaspro, A., & Brandi, F. (2012) · Optical Materials Express · doi:10.1364/ome.2.000510 · Cited by 106
Intartaglia, R., Bagga, K., & Brandi, F. (2014) · Optics Express · doi:10.1364/oe.22.003117 · Cited by 99
Shahzeydi, A., Ghiaci, M., Farrokhpour, H., Shahvar, A., Sun, M., & Saraji, M. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.03.227 · Cited by 98
Li, L., Zhang, J., Wang, Y., Zaman, F. U., Zhang, Y., Hou, L., & Yuan, C. (2021) · InfoMat · doi:10.1002/inf2.12218 · Cited by 92
Amans, D., Malaterre, C., Diouf, M., Mancini, C., Chaput, F., Ledoux, G., Breton, G., Guillin, Y., Dujardin, C., Masenelli‐Varlot, K., et al. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp109387e · Cited by 97
Calabro, R. L., Yang, D., & Kim, D. Y. (2019) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b01433 · Cited by 89
Keskin, N. O. S., Kurşungöz, C., Tümtaş, Y., Yaşa, Ö., Ortaç, B., & Tekinay, T. (2014) · Particuology · doi:10.1016/j.partic.2013.11.003 · Cited by 88
Jakobi, J., Menéndez-Manjón, A., Chakravadhanula, V. S. K., Kienle, L., Wagener, P., & Barcikowski, S. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/14/145601 · Cited by 78
Self-citationPodagatlapalli, G. K., Hamad, S., & Rao, S. V. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b03958 · Cited by 76
Mortazavi, S. Z., Parvin, P., Reyhani, A., Golikand, A. N., & Mirershadi, S. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1091224 · Cited by 75
Amendola, V., Litti, L., & Meneghetti, M. (2013) · Analytical Chemistry · doi:10.1021/ac401662r · Cited by 80
Bagga, K., McCann, R., Wang, M., Stalcup, A. M., Vázquez, M., & Brabazon, D. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.10.046 · Cited by 72
Messina, G. C., Wagener, P., Streubel, R., De Giacomo, A., Santagata, A., Compagnini, G., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42626a · Cited by 68
Self-citationFabrication and Characterization of Beaded SiC Quantum Rings with Anomalous Red Spectral Shift
Yang, S., Kiraly, B., Wang, W. Y., Shang, S., Cao, B., Zeng, H., Zhao, Y., Li, W., Liu, Z., Cai, W., et al. (2012) · Advanced Materials · doi:10.1002/adma.201202286 · Cited by 67
Wang, M., Wu, Z., Chu, Z., Yang, J., & Yao, C. (2014) · Chemistry - An Asian Journal · doi:10.1002/asia.201301562 · Cited by 64
Kohsakowski, S., Santagata, A., Dell’Aglio, M., de Giacomo, A., Barcikowski, S., Wagener, P., & Gökce, B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.077 · Cited by 62
Self-citationDetermining the role of redox-active materials during laser-induced water decomposition
Kalus, M.-R., Lanyumba, R., Lorenzo-Parodi, N., Jochmann, M. A., Kerpen, K., Hagemann, U., Schmidt, T. C., Barcikowski, S., & Gökce, B. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp02663k · Cited by 62
Self-citationCompagnini, G., Sinatra, M. G., Messina, G. C., Patanè, G., Scalese, S., & Puglisi, O. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.02.053 · Cited by 63
Kudryashov, S. I., Samokhvalov, A. A., Nastulyavichus, A., Saraeva, I. N., Mikhailovskii, V., Ионин, А. А., & Veiko, V. P. (2019) · Materials · doi:10.3390/ma12040562 · Cited by 61
Laser-Generated Bimetallic Ag-Au and Ag-Cu Core-Shell Nanoparticles for Refractive Index Sensing
Puthoor, N. M., & Soni, R. K. (2014) · Plasmonics · doi:10.1007/s11468-014-9854-5 · Cited by 60
Laser synthesis of nanoparticles in organic solvents – products, reactions, and perspectives
Fromme, T., Reichenberger, S., Tibbetts, K. M., & Barcikowski, S. (2024) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.15.54 · Cited by 65
Self-citationPodagatlapalli, G. K., Hamad, S., Tewari, S. P., Sreedhar, S., Prasad, M. D., & Rao, S. V. (2013) · Journal of Applied Physics · doi:10.1063/1.4792483 · Cited by 57
Advances in Electrospun Hybrid Nanofibers for Biomedical Applications
Nirwan, V. P., Kowalczyk, T., Bar, J. K., Buzgo, M., Filová, E., & Fahmi, A. (2022) · Nanomaterials · doi:10.3390/nano12111829 · Cited by 55
Saitow, K. (2024) · Bulletin of the Chemical Society of Japan · doi:10.1093/bulcsj/uoad002 · Cited by 54
Saraeva, I. N., Kudryashov, S. I., Rudenko, A. A., Zhilnikova, M. I., Ivanov, D. S., Zayarny, D. A., Simakin, A. V., Ionin, A. A., & Garcia, M. E. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.11.199 · Cited by 51
Antibacterial activity of PLAL synthesized nanocinnamon
Al-Shammari, A. A. S., Bidin, N., Lafi, A. S. A., & Huyop, F. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.014 · Cited by 50
Wang, H., Odawara, O., & Wada, H. (2016) · Scientific Reports · doi:10.1038/srep20507 · Cited by 49
Moram, S. S. B., Byram, C., & Rao, S. V. (2020) · Bulletin of Materials Science · doi:10.1007/s12034-019-2017-8 · Cited by 49
Kohsakowski, S., Gökce, B., Tanabe, R., Wagener, P., Plech, A., Ito, Y., & Barcikowski, S. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp01232a · Cited by 48
Self-citationUpconversion properties of Y2O3:Er,Yb nanoparticles prepared by laser ablation in water
Onodera, Y., Nunokawa, T., Odawara, O., & Wada, H. (2013) · Journal of Luminescence · doi:10.1016/j.jlumin.2012.12.033 · Cited by 47
Hasna, K., Kumar, S., Komath, M., Varma, M. R., Jayaraj, M. K., & Kumar, K. R. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp42648c · Cited by 46
Optimization of femtosecond laser processing in liquids
Hoppius, J. S., Maragkaki, S., Kanitz, A., Gregorčič, P., & Gurevich, E. L. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.121 · Cited by 42
Menéndez-Manjón, A., & Barcikowski, S. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.12.037 · Cited by 52
Self-citationHamad, A. H., Li, L., & Liu, Z. (2015) · Applied Physics A · doi:10.1007/s00339-015-9326-6 · Cited by 55
Dynamics of femtosecond laser produced tungsten nanoparticle plumes
Harilal, S. S., Farid, N., Hassanein, A., & Kozhevin, V. M. (2013) · Journal of Applied Physics · doi:10.1063/1.4833564 · Cited by 44
Letzel, A., Santoro, M., Frohleiks, J., Ziefuß, A. R., Reich, S., Plech, A., Fazio, E., Neri, F., Barcikowski, S., & Gökce, B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.025 · Cited by 44
Self-citationChewchinda, P., Tsuge, T., Funakubo, H., Odawara, O., & Wada, H. (2013) · Japanese Journal of Applied Physics · doi:10.7567/jjap.52.025001 · Cited by 46
Al‐Mamun, S. A., Nakajima, R., & Ishigaki, T. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.10.027 · Cited by 44
Size control of nanoparticles by multiple-pulse laser ablation
Yu, J., Nan, J., & Zeng, H. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.094 · Cited by 43
Discrimination of effects leading to gas formation during pulsed laser ablation in liquids
Kalus, M., Reimer, V., Barcikowski, S., & Gökce, B. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.09.224 · Cited by 43
Self-citationBalati, A., Bazilio, A. A., Shahriar, A., Nash, K. L., & Shipley, H. J. (2019) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2019.04.017 · Cited by 44
Laser assisted green synthesis of free standing reduced graphene oxides at the water–air interface
Compagnini, G., Russo, P., Tomarchio, F., Puglisi, O., D’Urso, L., & Scalese, S. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/50/505601 · Cited by 43
Laser ablation in liquids: A versatile technique for nanoparticle generation
Shaheen, M. E., & Abdelwahab, A. Y. E. (2025) · Optics & Laser Technology · doi:10.1016/j.optlastec.2025.112705 · Cited by 45
Hollow nanoparticle generation on laser-induced cavitation bubbles via bubble interface pinning
Yan, Z., Bao, R., Wright, R. N., & Chrisey, D. B. (2010) · Applied Physics Letters · doi:10.1063/1.3488003 · Cited by 42
Preparation of Y2O3:Er,Yb nanoparticles by laser ablation in liquid
Nunokawa, T., Onodera, Y., Hara, M., Kitamoto, Y., Odawara, O., & Wada, H. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.07.110 · Cited by 37
Doping nanoparticles using pulsed laser ablation in a liquid containing the doping agent
Chemin, A., Lam, J., Laurens, G., Trichard, F., Motto-Ros, V., Ledoux, G., Jarý, V., Laguta, V., Nikl, M., Dujardin, C., et al. (2019) · Nanoscale Advances · doi:10.1039/c9na00223e · Cited by 36
Carbon-Based Nanostructures Obtained in Water by Ultrashort Laser Pulses
Santagata, A., Bonis, A. D., Giacomo, A. D., Dell’Aglio, M., Laurita, A., Senesi, N., Gaudiuso, R., Orlando, S., Teghil, R., & Parisi, G. P. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1094239 · Cited by 37
Microwave Assisted Green Synthesis of Ag, Ag2O, and Ag2O3 Nanoparticles
Korkmaz, N., & Karadağ, A. (2021) · Journal of the Turkish Chemical Society Section A Chemistry · doi:10.18596/jotcsa.784065 · Cited by 34
Sakaki, S., Ikenoue, H., Tsuji, T., Ishikawa, Y., & Koshizaki, N. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2017.10.235 · Cited by 33
Sajti, C. L., Barchanski, A., Wagener, P., Klein, S., & Barcikowski, S. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1093405 · Cited by 33
Self-citationSchmitz, T., Wiedwald, U., Dubs, C., & Gökce, B. (2017) · ChemPhysChem · doi:10.1002/cphc.201601183 · Cited by 32
Purohit, P., Fortes, M. F., & Laserna, J. J. (2021) · Analytical Chemistry · doi:10.1021/acs.analchem.0c04827 · Cited by 32
Senegačnik, M., Kunimoto, K., Yamaguchi, S., Kimura, K., Sakka, T., & Gregorčič, P. (2021) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2021.105460 · Cited by 32
Review on Green Synthesis of Silver Nanoparticles through Plants
Shumail, H., Khalid, S., Ahmad, I., Khan, H. Z., Amin, S., & Ullah, B. (2020) · Endocrine Metabolic & Immune Disorders - Drug Targets · doi:10.2174/1871530320666200729153714 · Cited by 31
Kalus, M., Barcikowski, S., & Gökce, B. (2021) · Chemistry - A European Journal · doi:10.1002/chem.202005087 · Cited by 31
Self-citationИонин, А. А., Ivanova, A., Хмельницкий, Р. А., Klevkov, Y., Kudryashov, S. I., Melnik, N. N., Nastulyavichus, A., Rudenko, A. A., Saraeva, I. N., Smirnov, N., et al. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.12.057 · Cited by 31
Al-Shammari, A. A. S., Bidin, N., & Ghoshal, S. K. (2017) · LWT · doi:10.1016/j.lwt.2017.12.047 · Cited by 31
Al-Mamun, S. A., Nakajima, R., & Ishigaki, T. (2012) · Thin Solid Films · doi:10.1016/j.tsf.2012.06.011 · Cited by 29
Wasfi, A. S., Humud, H. R., & Fadhil, N. K. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.09.006 · Cited by 29
Piezoelectricity of picosecond laser-synthesized perovskite BaTiO3 nanoparticles
Choi, I., Lee, S.-J., Kim, J. C., Kim, Y.-G., Hyeon, D. Y., Hong, K.-S., Suh, J. H., Shin, D., Jeong, H. Y., & Park, K. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.145614 · Cited by 29
Kricke, J. L., Khairani, I. Y., Beele, B. B., Shkodich, N. F., Farle, M., Slabon, A., Doñate‐Buendía, C., & Gökce, B. (2023) · Virtual and Physical Prototyping · doi:10.1080/17452759.2023.2251017 · Cited by 30
Valverde-Alva, M. A., García-Fernández, T., Esparza-Alegría, E., Villagrán-Muniz, M., Sánchez-Aké, C., Castañeda-Guzmán, R., de la Mora, M. B., Márquez-Herrera, C. E., & Sánchez Llamazares, J. L. (2016) · Laser Physics Letters · doi:10.1088/1612-2011/13/10/106002 · Cited by 28
Chen, S., Zhang, Y., Han, W., Wellburn, D., Liang, J., & Liu, C. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.06.125 · Cited by 28
Wang, H., Odawara, O., & Wada, H. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.07.072 · Cited by 30
Castillo Rodriguez, G. A., Guillen, G. G., Mendivil Palma, M. I., Das Roy, T. K., Guzman Hernandez, A. M., Krishnan, B., & Shaji, S. (2015) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12212 · Cited by 27
Plasmon sensing and enhancement of laser prepared silver colloidal nanoplates
Condorelli, M., Scardaci, V., D'Urso, L., Puglisi, O., Fazio, E., & Compagnini, G. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.265 · Cited by 27
Byram, C., Rathod, J., Moram, S. S. B., Akkanaboina, M., & Rao, S. V. (2022) · Nanomaterials · doi:10.3390/nano12132150 · Cited by 27
Švrček, V., Mariotti, D., Blackley, R. A., Zhou, W., Nagai, T., Matsubara, K., & Kondo, M. (2013) · Nanoscale · doi:10.1039/c3nr00891f · Cited by 27
Asahi, T., Mafuné, F., Rehbock, C., & Barcikowski, S. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.04.104 · Cited by 27
Self-citationKalus, M., Lanyumba, R., Barcikowski, S., & Gökce, B. (2021) · Journal of Flow Chemistry · doi:10.1007/s41981-021-00144-7 · Cited by 26
Self-citationLaser generated Ag and Ag–Au composite nanoparticles for refractive index sensor
Puthoor, N. M., & Soni, R. K. (2014) · Applied Physics A · doi:10.1007/s00339-014-8460-x · Cited by 26
Nanoparticles considered as mixtures for toxicological research
Deng, H. F., Zhang, Y., & Yu, H. (2018) · Journal of Environmental Science and Health Part C · doi:10.1080/10590501.2018.1418792 · Cited by 26
Metadata
- Authors
- Sajti, C. L., Sattari, R., Chichkov, B. N., & Barcikowski, S.
- Affiliations
- Laser Zentrum Hannover (DE)
- Corresponding author
- Barcikowski, Stephan
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-01-25
- Volume
- 114
- Issue
- 6
- Pages
- 2421-2427
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W1982884613
- Cited by
- 242
- References
- 37
- Citations by year
- 2026: 4 · 2025: 15 · 2024: 15 · 2023: 12 · 2022: 16 · 2021: 22 · 2020: 14 · 2019: 12 · 2018: 18 · 2017: 19 · 2016: 17 · 2015: 10 · 2014: 16 · 2013: 16 · 2012: 21
- FWCI
- 9.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The Journal of Physical Chemistry C (publishedVersion)
- Funders
- Deutsche Forschungsgemeinschaft
- Bundesministerium für Bildung und Forschung
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Ultrasound and Cavitation Phenomena
- Keywords
- laser ablation in liquid, ceramic nanoparticles, gram-scale synthesis, nanosecond laser pulses, laser repetition rate, pulse overlap, ablation rate, liquid film thickness, cavitation bubbles, aqueous synthesis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.