Generalized Structural Description of Calcium–Sodium Aluminosilicate Hydrate Gels: The Cross-Linked Substituted Tobermorite Model
Open accessThe DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Abstract
Structural models for the primary strength and durability-giving reaction product in modern cements, a calcium (alumino)silicate hydrate gel, have previously been based solely on non-cross-linked tobermorite structures. However, recent experimental studies of laboratory-synthesized and alkali-activated slag (AAS) binders have indicated that the calcium-sodium aluminosilicate hydrate [C-(N)-A-S-H] gel formed in these systems can be significantly cross-linked. Here, we propose a model that describes the C-(N)-A-S-H gel as a mixture of cross-linked and non-cross-linked tobermorite-based structures (the cross-linked substituted tobermorite model, CSTM), which can more appropriately describe the spectroscopic and density information available for this material. Analysis of the phase assemblage and Al coordination environments of AAS binders shows that it is not possible to fully account for the chemistry of AAS by use of the assumption that all of the tetrahedral Al is present in a tobermorite-type C-(N)-A-S-H gel, due to the structural constraints of the gel. Application of the CSTM can for the first time reconcile this information, indicating the presence of an additional activation product that contains highly connected four-coordinated silicate and aluminate species. The CSTM therefore provides a more advanced description of the chemistry and structure of calcium-sodium aluminosilicate gel structures than that previously established in the literature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
(1997) · Emerald Group Publishing Limited eBooks · doi:10.1680/cc.25929 · Cited by 3,151
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Self-citationThe distribution of aluminum in the tetrahedra of silicates and aluminates
Loewenstein, W. B. (1954) · American Mineralogist · Cited by 1,794
Richardson, I. G. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.11.005 · Cited by 1,262
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
The nature of C-S-H in hardened cements
Richardson, I. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00168-4 · Cited by 1,133
Richardson, I. G. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.034 · Cited by 1,082
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Self-citation
Research works printed but not linked: 6
- Ben Haha M., 2011, Cem. Concr. Res., 41, 955, 10.1016/j.cemconres.2010.11.016 · DOI · Paper page
- McConnell J. D. C., 1954, Mineral. Mag., 30, 293
- Loewenstein W., 1954, Am. Mineral., 39, 92
- Tossell J. A., 1993, Am. Mineral., 78, 911
- Rawal A., 2010, J. Am. Ceram. Soc., 132, 7321
- Talling B., 1997, Waste Materials Used in Concrete Manufacturing, 235
Cited by
Items 401–500 of 579
Luukkοnen, T., Yliniemi, J., Walkley, B., Geddes, D. A., Griffith, B., Hanna, J. V., Provis, J. L., Kinnunen, P., & Illikainen, M. (2022) · RSC Advances · doi:10.1039/d2ra04456k · Cited by 9
Self-citationBílek, V., Kalina, L., Dvořák, R., Novotný, R., Švec, J., Másilko, J., & Šoukal, F. (2023) · Materials · doi:10.3390/ma16051908 · Cited by 10
“, sodium) cation that balances the negative charge of tetrahedral aluminum [5].”
BackgroundBalagosa, J., Lee, M., Choo, Y. W., Kim, H.-S., & Kim, J. (2023) · Materials · doi:10.3390/ma16196543 · Cited by 9
“On the other hand, the decrease in Al as the WABB dosage increases suggests its participation in C-S-H development and its propensity to crystallize further into C-A-S-H gel structures over the curing days [2,82].”
BackgroundDissolution kinetics of C-S-H gel and durability of mortar
Trapote-Barreira, A. (2015) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-95619 · Cited by 9
Jin, Y., Feng, W., Zheng, D., & Dong, Z. (2023) · Materials · doi:10.3390/ma16217032 · Cited by 7
“It is widely acknowledged that a cross-linked Al-substituted tobermorite (CSTM) model is suitable to describe the C-(N)-A-S-H gel formed in AAS [25–29].”
Qureshi, Y., Pal, B., & Singh, S. K. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.141273 · Cited by 8
Advancing pavement quality geopolymer concrete for low-volume roads: A comprehensive review
Ghara, B., Shiuly, A., & Mondal, A. (2025) · Materials chemistry and physics. · doi:10.1016/j.macse.2025.100022 · Cited by 12
Janga, S., Raut, A. N., & Das, S. K. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-025-14474-4 · Cited by 7
“Further, Myers et al. [35] states that the gel microstructure has a substantial impact on GPC’s fire resistance.”
Alkali Activation of Glass for Sustainable Upcycling: An Overview
Tameni, G., & Bernardo, E. (2025) · Ceramics · doi:10.3390/ceramics8030108 · Cited by 8
“In composition with moderate calcium concentration, a hybrid gel structure may form, where both C-A-S-H gel and sodium–aluminosilicate hydrate (N-A-S-H) phases [107] have been identified.”
Poojalakshmi, E. S., Nagarajan, P., Sudhakumar, J., Thomas, B. S., & Das, S. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.144078 · Cited by 9
Zhang, L., Chen, Y., Wu, W., Liu, Z., & Yu, Q. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106414 · Cited by 7
Effect of gluconate molecules on the reaction kinetics of C-(N)-A-S-H and N-A-S-H gel formation
Kong, J., Sun, C., Zhang, Z., Cai, C., Cao, Y., Wang, Y., Ma, H., Zeng, X., & Wang, H. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta07856c · Cited by 7
Tejas, S., & Pasla, D. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.145017 · Cited by 7
Qian, Y.-C., Zhang, L., Qiao, W., Li, Y.-Z., Wu, Y. H., & Zhao, Y.-R. (2025) · Scientific Reports · doi:10.1038/s41598-025-33462-0 · Cited by 10
Seawater-mixed alkali-activated materials: a comparative investigation of metal slag suitability
Jun, Y., Han, S. H., Bae, Y. H., & Kim, J. H. (2022) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2022.2135039 · Cited by 7
“[46, 47], which reportedly decompose between 30 C and”
BackgroundElevated Temperature Effects on Geo-Polymer Concrete: An Experimental and Numerical-Review Study
Turkey, F. A., Beddu, S. B., Al-Hubboubi, S., & Fawzi, N. M. (2023) · Annales de Chimie Science des Matériaux · doi:10.18280/acsm.470507 · Cited by 9
“The choice of precursors employed in the Geo-Polymerization process influences the microstructure of Geo-Polymers, as highlighted by Myers et al. [132] A-FA Class F (90%)-GP (10”
MethodWhat makes cements bind?—A proposal for a universal factor
Nguyen, H., & Kinnunen, P. (2024) · Materials Advances · doi:10.1039/d4ma00210e · Cited by 7
Yao, Y., Liu, C., Liu, H., Chen, X., Li, X., Wang, T., Wang, Y., Zhang, W., & Wu, Y. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112209 · Cited by 8
Assessing the Autogenous Shrinkage of Alkali-Activated Slag/Fly Ash Mortar Blends
Uppalapati, S., & Çizer, Ö. (2017) · ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete · doi:10.14359/51701061 · Cited by 10
Li, Q., Wang, Y., Geng, G., Chen, H., Hou, P., Cheng, X., Monteiro, P. J. M., Huang, S., & Kim, J. H. (2020) · Journal of Nanomaterials · doi:10.1155/2020/8419130 · Cited by 7
Yuan, Z. S., Tang, J., Ma, W., & Lu, C. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112027 · Cited by 6
Hu, B., Ding, L., Zeng, J., Chen, K., Peng, Z., Tong, L., Tong, L., Lan, T., Wang, H., Jiang, J., et al. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.118102 · Cited by 8
Calcium formate as a multi-faceted modifier for metakaolin geopolymer cement
Rashad, A. M., Shaltout, A. M., & Mokhtar, M. M. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.114899 · Cited by 6
Luukkοnen, T. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85584-6.00011-x · Cited by 6
Zhou, H., Zhang, S., Liu, B., Li, Q., He, C., & Li, D. (2020) · Advances in Cement Research · doi:10.1680/jadcr.19.00134 · Cited by 6
Surface chemistry of alkali-activated materials and how to modify it
Luukkοnen, T. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-88438-9.00002-8 · Cited by 8
Jounaghani, M. F., Jahangiri, A., & Jamekhorshid, A. (2023) · Asian Journal of Civil Engineering · doi:10.1007/s42107-023-00589-2 · Cited by 6
“Myers reported that the geopolymers’ microstructure varied with the type of the used precursor (Myers et al., 2013).”
BackgroundKamseu, E., Akono, A., Rosa, R., Mariani, A., & Leonelli, C. (2022) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2022.100461 · Cited by 6
Prentice, D. P. (2018) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York) · Cited by 8
Zhang, X., Mao, Y., Xie, J., Hu, X. Y., Wu, Z., & Shi, C. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.145145 · Cited by 5
Alashker, Y., Raza, A., Selmi, A., & Ghazouani, N. (2026) · Journal of the Australian Ceramic Society · doi:10.1007/s41779-026-01350-z · Cited by 5
“It usually ranges from 0.9 to 1.2, about ten times less than in ordinary cement [25].”
InfluentialCai, Y., Lin, Z., Wang, Q., Nong, Y., & Liu, Q. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106646 · Cited by 6
How are alkali-activated materials impacted by incorporating low viscosity organic liquids?
Reeb, C., Davy, C. A., Campos, M. D., Hosdez, J., Pierlot, C., Mercier, C., & Lambertin, D. (2023) · Materials and Structures · doi:10.1617/s11527-022-02089-2 · Cited by 5
Mineralogical study of a binder based on alkali-activated coal gangue
Moussadik, A., Ouzoun, F., Ez-zaki, H., Saadi, M., & Diouri, A. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.07.091 · Cited by 7
Hassan, A. M., Bunnori, N. M., Ramesh, S. S. R., Tan, C. Y., & Mo, K. H. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.136157 · Cited by 8
Schneider, N., & Stephan, D. A. (2016) · Materials · doi:10.3390/ma9110933 · Cited by 6
Walkley, B., Nicolas, R. S., Bernal, S., Provis, J. L., & van Deventer, J. (2015) · Cited by 9
Self-citationJing, X., Cang, D., Ramadan, M., Mohsen, A., & Zhang, L. (2025) · Recycling · doi:10.3390/recycling10040132 · Cited by 4
Wang, L., Cheng, D., Li, K., & Chen, S. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.115119 · Cited by 3
Enhancing geopolymer performance and reducing carbon footprint with waste glass powder
Sarkar, M., Maiti, M., & Xu, S. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.114745 · Cited by 7
Durability of slag-fly ash blended geopolymer composites incorporating reject brine waste
El‐Mir, A., Hwalla, J., Assaad, J. J., El-Dieb, A., & El-Hassan, H. (2025) · Developments in the Built Environment · doi:10.1016/j.dibe.2025.100836 · Cited by 4
Wang, A., Fang, Y., Wang, X., Zheng, D., Yang, H., Cao, X., Zhang, Z., & Xing, F. (2026) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-025-01586-6 · Cited by 6
“Here, the Cross-linked Tobermorite Substituted Model (CSTM) developed by Myers et al. [60] was employed to precisely describe the complex structural system within C-A-S-H.”
InfluentialGuo, M.-Q., Ding, Z., Zhang, H., Qiu, T.-R., Li, P., & Wang, D. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.145779 · Cited by 4
Das, S. K., & Suda, Y. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106572 · Cited by 6
Schönfeld, K., Izadifar, M., Ukrainczyk, N., & Koenders, E. (2026) · ACS Omega · doi:10.1021/acsomega.5c12412 · Cited by 4
Singh, P., Singh, B., Ojha, P. N., Trivedi, A., Singh, A. P., & Pede, C. (2023) · Revista Ingeniería de Construcción · doi:10.7764/ric.00075.21 · Cited by 4
Zhang, D.-W., Yang, T., Xu, X., Wang, Y., & Li, H. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.114519 · Cited by 5
Arachchige, R. M., Mishra, S., Olek, J., Rajabipour, F., & Peethamparan, S. (2025) · Engineering · doi:10.1016/j.eng.2025.05.003 · Cited by 5
Ma, H., Dai, E., Fu, H., Du, E., Zheng, X., & Feng, J. (2024) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-18549 · Cited by 4
Guo, Y., Peng, S., Qu, F., Wang, K., Zhang, S., & Li, W. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.166790 · Cited by 10
Chemistry and materials science of alkali-activated materials
Leonelli, C., & Palomo, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-88438-9.00013-2 · Cited by 7
Portale, S., Mazzoleni, P., & Barone, G. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.138669 · Cited by 4
Creep behaviour of geopolymer concrete
Un, C. H. (2017) · Figshare · doi:10.25916/sut.26279014 · Cited by 12
Laukkanen, J., Runtti, H., Lancellotti, I., Luukkonen, T., Leonelli, C., & Lassi, U. M. (2024) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-024-06002-y · Cited by 3
“In contrast, high-calcium-con-tent AAMs consist of partially cross-linked chain structures, resembling tobermorite mineral (Bernal et al. 2014; Lecomte et al. 2006, Myers et al. 2013).”
Song, W., Cui, Z., Wu, H., Zhang, J., Li, J., & Cheng, Z. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e05438 · Cited by 2
Lopez-Salas, J., & Escalante-Garcia, J. I. (2025) · Cement and Concrete Research · doi:10.1016/j.cemconres.2025.108103 · Cited by 5
Zhao, F., Wang, B., & Ren, Z. (2026) · Waste Disposal & Sustainable Energy · doi:10.1007/s42768-025-00266-x · Cited by 4
Oh, T., Woo, S. Y., Cui, Z., Park, G.-J., & Yoo, D. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106584 · Cited by 5
A study on influence of carbon curing on the performance of agro biochar based geopolymer mortars
Valluru, U. R., Rathish Kumar, P., & Nayaka, R. R. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.146072 · Cited by 3
Burciaga-Díaz, O., Santana-Carrillo, J. L., Lopez-Salas, J., & Escalante-Garcia, J. I. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.145975 · Cited by 5
Izadifar, M., Thissen, P., Mohamed, O. A., Ukrainczyk, N., Boroumandi, M., Omar, M., Omar, A., & Koenders, E. (2026) · Nanomaterials · doi:10.3390/nano16120778 · Cited by 3
“H gels proposed by Myers et al. [40], atomic models were constructed by introducing controlled decal-cification within the tobermorite framework to reproduce Ca-deficient environments typical of AAS binders.”
Zhi, T., Wang, Y., Zhang, S., Xue, A., Lv, Y., Fu, Y., Luo, Z., & Tan, H. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106744 · Cited by 6
Henning, R., Sturm, P., Keßler, S., & Gluth, G. J. G. (2024) · Applied Geochemistry · doi:10.1016/j.apgeochem.2024.106027 · Cited by 3
Jia, R., Luo, T., & Zhuang, S. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143475 · Cited by 3
Hautamäki, K., Heponiemi, A., Tuomikoski, S., Hu, T., & Lassi, U. M. (2023) · Environmental Technology · doi:10.1080/09593330.2023.2256456 · Cited by 3
“…with low calcium concentration, known as geopolymers, have a three-dimensional aluminosilicate framework [2], while in the case of high-calcium AAMs, the calcium-sodium aluminosili-cate hydrate (C-(N)A-S-H) gel formed contains more cross-linked and non-cross-linked tobermorite structures [1, 3].”
Investigation of the Pore Structures and Water Absorbency of Foamed Alkali-Activated Binders
Cong, X., Tang, Z., Zang, T., Lü, S., Tan, Y., Wang, Z., & Huang, T. (2023) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-16328 · Cited by 3
Changes in the elastic moduli of C–S–H due to presence of interlaminar cations
Mejia, S., & Hoyos, B. (2016) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/24/3/035018 · Cited by 3
Potential use of blast furnace slag for filtration membranes preparation: A pilot study
Bílek, V., Bulejko, P., Kejík, P., Hajzler, J., Másilko, J., Bednárek, J., Tkácz, J., & Kalina, L. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/379/1/012012 · Cited by 3
“The main binding phase formed during alkaline activation of slag is calcium-aluminium-silicatehydrate (C-A-S-H) [11, 12].”
BackgroundSotiriadis, K., Mazur, A. S., Tolstoy, P. M., & Frankeová, D. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.06.185 · Cited by 3
Idrissi, A. C. E. (2016) · theses.fr (ABES) · doi:10.70675/9d71147az6191z4b50z8d26z8e8c5da7696a · Cited by 20
Kangni-Foli, E. (2019) · theses.fr (ABES) · doi:10.70675/c2c3d7f3zce1dz4fb1z907dz4349de123b70 · Cited by 6
Babaee, M., & Castel, A. (2024) · Materials · doi:10.3390/ma17153647 · Cited by 3
“…(metakaolin and FA) is a highly amorphous and cross-linked alkali aluminosilicate-type gel, also known as a “geopolymer” [3,4], whereas in the alkali activation of the calcium-rich GGBS, an alkali charge-balanced aluminum-substituted calcium silicate hydrate is the main reaction product [5–8].”
BackgroundSeawater Mixed with One Part Alkali Activated Material: An Environmental and Cost Evaluation
Li, X., Liu, H., Xing, J., Gan, M., Ji, Z., Fan, X., & Sun, Z. (2024) · Materials · doi:10.3390/ma17164113 · Cited by 2
“C* The humps around 25–35° 2 θ can be assigned to the calcium (alumino)silicate hydrate type gel (C-A-S-H) [7,10].”
BackgroundMethodResultFu, Q., Xue, Y., Bu, M., Tian, Q., Miao, Y., & Niu, D. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-10521-x · Cited by 2
Rabbil, M., Bhuyan, M., Alzeer, M., Adesanya, E., & Luukkonen, T. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.04.065 · Cited by 2
Zhou, S., Zhang, H., Lv, J., Sun, K., Guo, K., Chen, F., Liu, Y., & Ge, Z. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.118681 · Cited by 4
Malferrari, D., Galamini, G., Bernini, M., Fantini, R., Malvolti, G., & Gualtieri, A. F. (2025) · ACS Omega · doi:10.1021/acsomega.5c06547 · Cited by 2
Zhou, X., Shao, Y., Jia, G., Ma, J., Zhu, Y., Zhang, T., Zhang, W., Yang, Y., Tian, C., & Shao, Y. (2026) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2026.109067 · Cited by 2
Aghabeyk, F., Chen, B., Gupta, M., Liu, C., & Ye, G. (2026) · Materials and Structures · doi:10.1617/s11527-026-03216-z · Cited by 2
“This gel is known to form within a bulk compositional range of Al/ Si 0.25 and 0.67 ≤ Ca/(Si + Al) ≤ 1.2 in AAS [1, 21, 26], and is broadly classified into non-cross-linked or cross-linked structures, depending on its aluminum content [26].”
InfluentialShrinkage of Alkali-Activated Combined Slag and Fly Ash Concrete Cured at Ambient Temperature
Rodrigue, A., Bissonnette, B., Duchesne, J., & Fournier, B. (2022) · ACI Materials Journal · doi:10.14359/51734615 · Cited by 2
Qi, F. W., Zhu, G., Chen, Y., Zhu, Y., Li, S., Zhang, J., & Li, H. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c01231 · Cited by 2
Development and Characterization of Alkali-Activated Lithium Slag-Fly Ash Composite Cement
Dong, J., Tu, Z., Shang, X., Wu, H., Li, Z., & Ding, H. (2024) · Buildings · doi:10.3390/buildings14123766 · Cited by 2
Enhanced carbonation reactivity of barium-doped rankinite
Ndzila, J. S. (2025) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2025.2474519 · Cited by 2
“The mean chain length (MCL) of carbonated calcium silicates was determined based on Equation 3 [55 – 57].”
CEMENT BRICK STRUCTURE FORMATION DEPENDING ON HARDENING TIME AND TEMPERATURE
Gnyrya, A. I., Abzaev, Y. A., Korobkov, S. V., & Gauss, K. S. (2018) · Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel nogo universiteta JOURNAL of Construction and Architecture · doi:10.31675/1607-1859-2018-20-2-171-185 · Cited by 2
Models for the Cross-Linked Calcium Aluminate Silicate Hydrate (C–A–S–H) Gel
Hou, D. (2019) · Springer eBooks · doi:10.1007/978-981-13-8711-1_6 · Cited by 2
The Atomic-Level Structure of Cementitious Calcium Aluminate Silicate Hydrate Determined by NMR
Moutzouri, P., & Emsley, L. (2021) · CHIMIA International Journal for Chemistry · doi:10.2533/chimia.2021.272 · Cited by 3
Alkali-activated materials - A review for sustainable construction
Jain, D., Alex, J., & Aravind, H. B. (2022) · AIP conference proceedings · doi:10.1063/5.0111478 · Cited by 3
X-ray diffraction of slag-based sodium salt waste forms
Savannah River Site (SRS), A., Langton, C., USDOE, & Missimer, D. M. (2014) · doi:10.2172/1167507 · Cited by 2
Zheng, Y., Rao, F., Tian, X., & Lin, S. (2022) · Research Square · doi:10.21203/rs.3.rs-1992261/v1 · Cited by 2
Karam, R. (2019) · theses.fr (ABES) · doi:10.70675/e99a17f7za95cz4fb2zb1a5z4bdbb52b7e6f · Cited by 9
Deissmann, G., Neeft, E., & Jacques, D. (2025) · Frontiers in Nuclear Engineering · doi:10.3389/fnuen.2024.1433257 · Cited by 1
Jiang, Z., & Zhu, X. (2025) · Springer eBooks · doi:10.1007/978-981-96-1836-1_3 · Cited by 1
Garipov, R. R., Rakhimova, N. R., Morozov, V. P., & Ескин, А. А. (2025) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-025-01989-x · Cited by 2
Efficient design of alkali-activated reactive powder concrete for sustainable construction
Hossain, M. T., Sheikh, M. N., & Hadi, M. N. S. (2026) · Proceedings of the Institution of Civil Engineers - Construction Materials · doi:10.1680/jcoma.25.00113 · Cited by 1
Sun, Y., Dai, X., Sun, B., Rahul, A. V., Tao, Y., Yliniemi, J., Gao, M., Sha, W., Palacios, M., Puertas, F., et al. (2026) · RILEM state-of-the-art reports · doi:10.1007/978-3-032-07116-3_6 · Cited by 1
Tejas, S., & Pasla, D. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.115513 · Cited by 1
Seo, J., Kim, G. M., Park, J., Bae, J.-H., Kim, N., Choi, S., & Lee, H. K. (2026) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2026.e05875 · Cited by 5
Guo, S., Wang, H., Duan, Z., Zhang, H., Qian, H., & Ye, H. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.145750 · Cited by 1
Oh, T., Woo, S. Y., Park, S., Park, G.-J., Park, J.-J., Banthia, N., & Yoo, D. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.146122 · Cited by 1
Luo, K., Chen, Z., & Ye, H. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.147424 · Cited by 1
Metadata
- Authors
- Myers, R. J., Bernal, S. A., San Nicolas, R., & Provis, J. L.
- Affiliations
- The University of Melbourne (AU)
- Department of Chemical & Biomolecular Engineering, University of Melbourne, Victoria 3010, Australia
- Corresponding author
- Provis, John L.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-04-15
- Volume
- 29
- Issue
- 17
- Pages
- 5294-5306
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2069709155
- Cited by
- 579
- References
- 63
- Citations by year
- 2026: 62 · 2025: 57 · 2024: 70 · 2023: 62 · 2022: 77 · 2021: 36 · 2020: 34 · 2019: 39 · 2018: 31 · 2017: 33 · 2016: 27 · 2015: 25 · 2014: 19 · 2013: 7
- FWCI
- 56.43
- Type
- journal article
- Language
- en
- Open access
- Licence
- other-oa
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- Edinburgh Research Explorer (University of Edinburgh) (publishedVersion, other-oa)
- White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (acceptedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Keywords
- C-(N)-A-S-H gel, tobermorite, alkali-activated slag, structural model, tetrahedral aluminum, phase assemblage, cement hydration products
- MeSH terms
- Aluminum Silicates, Calcium, Cross-Linking Reagents, Gels, Models, Molecular, Sodium, Water, Molecular Structure, Calcium Compounds, Silicates
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.