Generalized Structural Description of Calcium–Sodium Aluminosilicate Hydrate Gels: The Cross-Linked Substituted Tobermorite Model
Open accessThe DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Abstract
Structural models for the primary strength and durability-giving reaction product in modern cements, a calcium (alumino)silicate hydrate gel, have previously been based solely on non-cross-linked tobermorite structures. However, recent experimental studies of laboratory-synthesized and alkali-activated slag (AAS) binders have indicated that the calcium-sodium aluminosilicate hydrate [C-(N)-A-S-H] gel formed in these systems can be significantly cross-linked. Here, we propose a model that describes the C-(N)-A-S-H gel as a mixture of cross-linked and non-cross-linked tobermorite-based structures (the cross-linked substituted tobermorite model, CSTM), which can more appropriately describe the spectroscopic and density information available for this material. Analysis of the phase assemblage and Al coordination environments of AAS binders shows that it is not possible to fully account for the chemistry of AAS by use of the assumption that all of the tetrahedral Al is present in a tobermorite-type C-(N)-A-S-H gel, due to the structural constraints of the gel. Application of the CSTM can for the first time reconcile this information, indicating the presence of an additional activation product that contains highly connected four-coordinated silicate and aluminate species. The CSTM therefore provides a more advanced description of the chemistry and structure of calcium-sodium aluminosilicate gel structures than that previously established in the literature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
(1997) · Emerald Group Publishing Limited eBooks · doi:10.1680/cc.25929 · Cited by 3,151
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Self-citationThe distribution of aluminum in the tetrahedra of silicates and aluminates
Loewenstein, W. B. (1954) · American Mineralogist · Cited by 1,794
Richardson, I. G. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.11.005 · Cited by 1,262
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
The nature of C-S-H in hardened cements
Richardson, I. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00168-4 · Cited by 1,133
Richardson, I. G. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.034 · Cited by 1,082
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Self-citation
Research works printed but not linked: 6
- Ben Haha M., 2011, Cem. Concr. Res., 41, 955, 10.1016/j.cemconres.2010.11.016 · DOI · Paper page
- McConnell J. D. C., 1954, Mineral. Mag., 30, 293
- Loewenstein W., 1954, Am. Mineral., 39, 92
- Tossell J. A., 1993, Am. Mineral., 78, 911
- Rawal A., 2010, J. Am. Ceram. Soc., 132, 7321
- Talling B., 1997, Waste Materials Used in Concrete Manufacturing, 235
Cited by
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Self-citationAdvances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Self-citationOne-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
“This is consistent with the structural model and interpretation of Si MAS NMR results recently proposed by the authors [66] where a highly crosslinked C–N–A–S–H type gel has been identified in these systems after extended curing.”
ResultSelf-citationGeopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
“This leads to a higher degree of polymerisation, and also a significant degree of crosslinking between tobermorite chains, evidenced by the presence of Q(3) sites, and consistent with the Crosslinked Substituted Tobermorite Model developed recently for application to these binders [34].”
BackgroundResultInfluentialSelf-citationRecent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationHandbook of Alkali-Activated Cements, Mortars and Concretes
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16511-7 · Cited by 688
Hassan, A., Arif, M., & Shariq, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.051 · Cited by 639
Walkley, B., San Nicolas, R., Sani, M.-A., Rees, G. J., Hanna, J. V., van Deventer, J. S. J., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.08.010 · Cited by 544
Self-citationDurability of Alkali‐Activated Materials: Progress and Perspectives
Bernal, S. A., & Provis, J. L. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12831 · Cited by 547
Self-citationA review on alkaline activation: New analytical perspectives
Palomo, A., Krivenko, P., Garcia-Lodeiro, I., Kavalerova, E., Maltseva, O., & Fernández-Jiménez, A. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.00314 · Cited by 501
“Many papers can now be found in the literature that confirm the presence of Q(3)(nAl) units in the C-A-S-H gels forming during slag alkaline activation (53, 63, 69, 70).”
BackgroundBernal, S. A., San Nicolas, R., Myers, R. J., Mejía de Gutiérrez, R., Puertas, F., van Deventer, J. S. J., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.003 · Cited by 493
“However, a structural model and interpretation of Si MAS NMR results for alkali-activated slags has recently been proposed [37], suggesting that Q and Q(1Al) sites could overlap with contributions of Q(3Al) and Q(4Al) sites from an aluminosilicate type gel forming in Al-rich binders, and these Q(4Al) sites will thus c…”
InfluentialSelf-citationMyers, R. J., L'Hôpital, E., Provis, J. L., & Lothenbach, B. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.10.015 · Cited by 469
“C-(A-)S-H structural parameters calculated from deconvolution analysis of the (29)Si MAS NMR spectra, determined using the ‘Substituted General Model’ [57] for the non-crosslinked phases and the ‘Cross-linked Substituted Tobermorite Model’ [17] for the cross-linked phases.”
Self-citationModel structures for C-(A)-S-H(I)
Richardson, I. G. (2014) · Acta Crystallographica Section B Structural Science, Crystal Engineering and Materials · doi:10.1107/s2052520614021982 · Cited by 450
“3 of Myers et al. (2013). electronic reprint SOFBT ¼ 3 Fraction of tetrahedral sites that are bridging Fraction of tetrahedral sites that are vacant SOFBT ¼ 3 1 3 v ¼ 1 3v: ð10Þ If Al ions are present at the bridging site as well as Si, then site occupancy factors for Si and Al are SOFSiBT ¼ 1 3f…”
Abdalqader, A. F., Jin, F., & Al-Tabbaa, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.010 · Cited by 444
Alkali uptake in calcium alumina silicate hydrate (C-A-S-H)
L'Hôpital, E., Lothenbach, B., Scrivener, K., & Kulik, D. A. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.03.009 · Cited by 384
Carbonation behavior of calcium silicate hydrate (C-S-H): Its potential for CO2 capture
Liu, X., Feng, P., Cai, Y., Yu, X., Yu, C., & Ran, Q. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.134243 · Cited by 363
Solid-state nuclear magnetic resonance spectroscopy of cements
Walkley, B., & Provis, J. L. (2019) · Materials Today Advances · doi:10.1016/j.mtadv.2019.100007 · Cited by 361
Self-citationRole of carbonates in the chemical evolution of sodium carbonate-activated slag binders
Bernal, S. A., Provis, J. L., Myers, R. J., San Nicolas, R., & van Deventer, J. S. J. (2015) · Materials and Structures · doi:10.1617/s11527-014-0412-6 · Cited by 334
“[35, 37, 48, 49], and this is consistent with the dissolution taking place rapidly under far-from-equilibrium conditions where Si–O–(Si,Al) bonds can readily be broken.”
BackgroundSelf-citationKe, X., Bernal, S. A., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.11.012 · Cited by 328
“For consistency, thedeconvolutionswere conducted assuming that the anhydrous slagwas dissolving congruently, as in sodium silicate or sodiumhydroxide activation [15,17,59].”
BackgroundSelf-citationGardner, L. J., Bernal, S. A., Walling, S. A., Corkhill, C. L., Provis, J. L., & Hyatt, N. C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.01.015 · Cited by 324
“In blended Portland cement and alkali-activated slag systems, the Al region usually sharpens upon reaction due to the formation of an Alsubstituted calcium silicate hydrate (C-(A)-S-H) [38] type gel.”
BackgroundSelf-citationA thermodynamic model for C-(N-)A-S-H gel: CNASH_ss. Derivation and validation
Myers, R. J., Bernal, S. A., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.07.005 · Cited by 312
Self-citationMultiscale micromechanical analysis of alkali-activated fly ash-slag paste
Fang, G., & Zhang, M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106141 · Cited by 292
An overview of the chemistry of alkali-activated cement-based binders
Garcia-Lodeiro, I., Palomo, A., & Fernández-Jiménez, A. (2015) · Handbook of Alkali-Activated Cements, Mortars and Concretes · doi:10.1533/9781782422884.1.19 · Cited by 249
The Role of Al in Cross‐Linking of Alkali‐Activated Slag Cements
Myers, R. J., Bernal, S. A., Gehman, J. D., van Deventer, J. S. J., & Provis, J. L. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13360 · Cited by 287
Self-citationCements in the 21 st century: Challenges, perspectives, and opportunities
Biernacki, J. J., Bullard, J. W., Sant, G., Brown, K., Glasser, F. P., Jones, S., Ley, T., Livingston, R., Nicoleau, L., Olek, J., et al. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14948 · Cited by 276
Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review
Fu, Q., Bu, M., Zhang, Z., Xu, W., Yuan, Q., & Niu, D. (2023) · Engineering · doi:10.1016/j.eng.2021.07.026 · Cited by 272
Marjanović, N., Komljenović, M., Baščarević, Z., Nikolić, V., & Petrović, R. (2015) · Ceramics International · doi:10.1016/j.ceramint.2014.09.075 · Cited by 266
Gao, X., Yu, Q. L., & Brouwers, H. J. H. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.06.108 · Cited by 261
“In addition, there is a small amount of high crosslinking Q3(1Al) sites (around −89 ppm) that is in line with previous studies [25,53,55].”
BackgroundResultThe interrelationship between surface chemistry and rheology in alkali activated slag paste
Kashani, A., Provis, J. L., Qiao, G. G., & van Deventer, J. S. J. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.127 · Cited by 268
Self-citationAlkali-activated slag concrete: Fresh and hardened behaviour
Puertas, F., González-Fonteboa, B., González-Taboada, I., Alonso, M. M., Torres-Carrasco, M., Rojo, G., & Martínez-Abella, F. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.10.003 · Cited by 242
Hou, D., Li, T., & Wang, P. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02126 · Cited by 243
Application of thermodynamic modelling to hydrated cements
Lothenbach, B., & Zajac, M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105779 · Cited by 241
Phase diagrams for alkali-activated slag binders
Myers, R. J., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.006 · Cited by 241
“Additional properties of the C-(N-)A-S-H gel phases simulated using the CNASH_ss thermodynamicmodel, its chemical composition, density, molar volume, and mean chain length (calculated using formula for non-cross-linked C-(N-)A-S-H structures and described in [21,34]), are provided alongside those data (Supporting Info…”
BackgroundMethodResultSelf-citationThermodynamic modelling of alkali-activated slag cements
Myers, R. J., Lothenbach, B., Bernal, S. A., & Provis, J. L. (2015) · Applied Geochemistry · doi:10.1016/j.apgeochem.2015.06.006 · Cited by 240
Self-citationThe Atomic-Level Structure of Cementitious Calcium Aluminate Silicate Hydrate
Kunhi Mohamed, A., Moutzouri, P., Berruyer, P., Walder, B. J., Siramanont, J., Harris, M., Negroni, M., Galmarini, S. C., Parker, S. C., Scrivener, K. L., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c02988 · Cited by 234
Recycling mine tailings in chemically bonded ceramics – A review
Kinnunen, P., Ismailov, A., Solismaa, S., Sreenivasan, H., Räisänen, M.-L., Levänen, E., & Illikainen, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.280 · Cited by 220
Kupwade-Patil, K., Palkovic, S. D., Bumajdad, A., Soriano, C., & Büyüköztürk, O. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.165 · Cited by 216
Geng, G., Myers, R. J., Li, J., Maboudian, R., Carraro, C., Shapiro, D. A., & Monteiro, P. J. M. (2017) · Scientific Reports · doi:10.1038/srep44032 · Cited by 203
Self-citationApplication of alkali-activated materials for water and wastewater treatment: a review
Luukkonen, T., Heponiemi, A., Runtti, H., Pesonen, J., Yliniemi, J., & Lassi, U. (2019) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-019-09494-0 · Cited by 201
“H gel), on the other hand, consists of cross-linked and non-cross linked structures resembling tobermorite (Bernal et al. 2014a; Myers et al. 2013, 2014; Walkley et al. 2016).”
BackgroundHuang, H., Teng, L., Gao, X., Khayat, K. H., Wang, F., & Liu, Z. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106713 · Cited by 195
Innovations to decarbonize materials industries
Daehn, K., Basuhi, R., Gregory, J., Berlinger, M., Somjit, V., & Olivetti, E. A. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00376-y · Cited by 189
Uncovering the role of micro silica in hydration of ultra-high performance concrete (UHPC)
Lee, N. K., Koh, K. T., Kim, M. O., & Ryu, G. S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.11.002 · Cited by 192
Adesanya, E., Perumal, P., Luukkonen, T., Yliniemi, J., Ohenoja, K., Kinnunen, P., & Illikainen, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125558 · Cited by 170
“However, Liþ has been used as LiOH in some studies (Nagalia Gaurav et al., 2016; Wang et al., 2014).”
MethodNedeljković, M., Ghiassi, B., van der Laan, S., Li, Z., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.11.011 · Cited by 168
Li, J., Geng, G., Myers, R., Yu, Y.-S., Shapiro, D., Carraro, C., Maboudian, R., & Monteiro, P. J. M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.09.008 · Cited by 162
“Si for Al substitution also occurs in cross-linked bridging sites (Q(3)) at 80 °C, and in alkali-activated fly ash and slag at room temperature [12, 17-19].”
BackgroundSelf-citationEffects of pH on the nano/micro structure of calcium silicate hydrate (C-S-H) under sulfate attack
Liu, X., Feng, P., Li, W., Geng, G., Huang, J., Gao, Y., Mu, S., & Hong, J. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106306 · Cited by 168
Characterisation of reactive magnesia and sodium carbonate-activated fly ash/slag paste blends
Abdalqader, A. F., Jin, F., & Al-Tabbaa, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.06.015 · Cited by 166
Xiao, R., Jiang, X., Zhang, M., Polaczyk, P., & Huang, B. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108975 · Cited by 164
Pacewska, B., & Wilińska, I. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09907-1 · Cited by 160
Sulfuric acid resistance of one-part alkali-activated mortars
Sturm, P., Gluth, G. J. G., Jäger, C., Brouwers, H. J. H., & Kühne, H.-C. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.009 · Cited by 163
“Further, a significant amount of unreacted GGBFS, that would be visible by its Q species at −74 ppm [34], cannot be distinguished in the spectrum of MS_6_SL; it can thus be concluded that the GGBFS has reacted virtually completely.”
Alkali-activated mortars: Workability and rheological behaviour
Alonso, M. M., Gismera, S., Blanco, M. T., Lanzón, M., & Puertas, F. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.020 · Cited by 160
Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Wang, Y., Cao, Y., Zhang, Z., Huang, J., Zhang, P., Ma, Y., & Wang, H. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109510 · Cited by 167
Babaee, M., & Castel, A. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.009 · Cited by 169
Wang, Y., Cao, Y., Zhang, Z., Zhang, P., Ma, Y., Wang, A., & Wang, H. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107068 · Cited by 162
Alkali-activated slag cements produced with a blended sodium carbonate/sodium silicate activator
Bernal, S. A., Nicolas, R. S., Provis, J. L., & van Deventer, J. S. J. (2015) · Advances in Cement Research · doi:10.1680/jadcr.15.00013 · Cited by 168
“…ppm was observed along with the formation of a lowintensity shoulder at ~58 ppm, consistent with the formation of aluminium-substituted tobermorites with low calcium/(silicon +aluminium) ratio (Sun et al., 2006) and highly cross-linked calcium aluminium silicate hydrate phases (Myers et al., 2013).”
BackgroundSelf-citationGel composition and molecular structure of alkali-activated metakaolin-limestone cements
Perez-Cortes, P., & Escalante-Garcia, J. I. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106211 · Cited by 147
Grangeon, S., Claret, F., Roosz, C., Satō, T., Gaboreau, S., & Linard, Y. (2016) · Journal of Applied Crystallography · doi:10.1107/s1600576716003885 · Cited by 146
“…study, the main parameters that are susceptible to evolving as a function of the Ca/Si ratio are the occupancy of Si bridging tetrahedra in the wollastonite-like chains ( e.g. Myers et al. , 2013; Richardson, 2014) and the abundance of interlayer water (Kim et al. , 2013; Marty et al. , 2015).”
Liu, L., Sun, C. H., Geng, G., Feng, P., Li, J., & Dähn, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105793 · Cited by 139
Structure, Mechanisms of Reaction, and Strength of an Alkali‐Activated Blast‐Furnace Slag
Burciaga‐Díaz, O., & Escalante‐García, J. I. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12620 · Cited by 137
Lee, N. K., Koh, K.-T., An, G. H., & Ryu, G.-S. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.11.042 · Cited by 134
Mine wastes based geopolymers: A critical review
Mabroum, S., Moukannaa, S., Machi, A. E., Taha, Y., Benzaazoua, M., & Hakkou, R. (2020) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2020.100014 · Cited by 143
Liu, C., Li, Z., Nie, S., Skibsted, J., & Ye, G. (2024) · Cement and Concrete Research · doi:10.1016/j.cemconres.2024.107432 · Cited by 131
Autogenous and drying shrinkage of alkali‐activated slag mortars
Hu, X., Shi, C., Zhang, Z., & Hu, Z. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16349 · Cited by 126
“…gel with low Ca/Si ratio in AAS tend to cause higher shrinkage than that in Portland cement,especially when activated with high modulus LSS. 39,41 As shown in Figure 8, the development of mass loss is consistent with the occurrence of major part of drying shrinkage within the same period…”
Humad, A. M., Kothari, A., Provis, J. L., & Ćwirzeń, A. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00009 · Cited by 137
“Generally, the structure of the C-(N)-A-S-H phase is similar to the C-S-H phase formed in Portland cement based system but with a lower calcium content (Shi et al., 2006; Myers et al., 2013).”
BackgroundSelf-citationChen, H., Yuan, H., Mao, L., Hashmi, M. Z., Xu, F., & Tang, X. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.124885 · Cited by 123
Tayeh, B. A., Hakamy, A. A., Amin, M., Zeyad, A. M., & Agwa, I. S. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e00951 · Cited by 121
Gao, X., Yu, Q., Lazaro, A., & Brouwers, H. J. H. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.06.007 · Cited by 127
Walkley, B., Nicolas, R. S., Sani, M., Bernal, S. A., van Deventer, J. S. J., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.006 · Cited by 123
Self-citationNedeljković, M., Šavija, B., Zuo, Y., Luković, M., & Ye, G. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.005 · Cited by 123
Binder Chemistry – High-Calcium Alkali-Activated Materials
Bernal, S. A., Provis, J. L., Fernández‐Jiménez, A., Krivenko, P. V., Kаvalerova, Е., Palacios, M., & Shi, C. (2013) · RILEM state-of-the-art reports · doi:10.1007/978-94-007-7672-2_3 · Cited by 132
Self-citationOrtaboy, S., Li, J., Geng, G., Myers, R. J., Monteiro, P. J. M., Maboudian, R., & Carraro, C. (2017) · RSC Advances · doi:10.1039/c7ra07266j · Cited by 115
Self-citationLiu, Q., Li, X., Cui, M., Wang, J., & Lyu, X. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126806 · Cited by 115
Binders alternative to Portland cement and waste management for sustainable construction—part 1
Coppola, L., Bellezze, T., Belli, A., Bignozzi, M. C., Bolzoni, F., Brenna, A., Cabrini, M., Candamano, S., Cappai, M., Caputo, D., et al. (2018) · Journal of Applied Biomaterials & Functional Materials · doi:10.1177/2280800018782845 · Cited by 137
“undissolved portions of the slag particles through a diffusion mechanism (44).”
BackgroundLi, J., Yu, Q., Huang, H., & Yin, S. (2019) · Materials · doi:10.3390/ma12081268 · Cited by 116
“6 were prepared by using the chemical precipitation method [13,15].”
MethodWang, H., Wu, H., Xing, Z., Wang, R., & Dai, S. (2021) · Materials · doi:10.3390/ma14143845 · Cited by 110
Coupled thermodynamic modelling and experimental study of sodium hydroxide activated slag
Zuo, Y., Nedeljković, M., & Ye, G. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.087 · Cited by 117
Factors affecting the slump and strength development of geopolymer concrete
Nguyen, T. T., Goodier, C. I., & Austin, S. A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119945 · Cited by 116
Burciaga-Díaz, O., & Escalante-Garcia, J. I. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.09.007 · Cited by 109
Huang, D., Chen, P., Peng, H., Yang, Y., Yuan, Q., & Su, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124760 · Cited by 112
Yang, G., Zhao, J., & Wang, Y. (2021) · Materials Today Sustainability · doi:10.1016/j.mtsust.2021.100099 · Cited by 130
Burciaga-Díaz, O., & Betancourt-Castillo, I. E. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.01.002 · Cited by 110
Grangeon, S., Fernandez-Martinez, A., Baronnet, A., Marty, N., Poulain, A., Elkaïm, E., Roosz, C., Gaboreau, S., Henocq, P., & Claret, F. (2017) · Journal of Applied Crystallography · doi:10.1107/s1600576716017404 · Cited by 103
“H to take up many elements such as Al, K or Na (Bach et al., 2013; Myers et al., 2013, 2015).”
BackgroundKupwade‐Patil, K., Alaibani, A., Abdulsalam, M. F., Mao, C., Bumajdad, A., Palkovic, S. D., & Büyüköztürk, O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.084 · Cited by 107
Rakhimova, N. R., & Rakhimov, R. Z. (2018) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2018.07.006 · Cited by 120
Tahri, W., Hu, X., Shi, C., & Zhang, Z. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123484 · Cited by 103
Oh, T., Chun, B., Lee, S. K., Kim, G. W., Banthia, N., & Yoo, D. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107379 · Cited by 102
Hassan, A., Arif, M., & Shariq, M. (2019) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-019-04269-9 · Cited by 103
Lu, J., Shen, P., Sun, Y., & Poon, C. S. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106842 · Cited by 101
Torres‐Carrasco, M., & Puertas, F. (2017) · Revista de ingeniería de construcción · doi:10.4067/s0718-50732017000200001 · Cited by 99
Salih, M. A., Farzadnia, N., Ali, A. A. A., & Demirboğa, R. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.119 · Cited by 108
Myers, R. J., L’Hôpital, E., Provis, J. L., & Lothenbach, B. (2015) · Dalton Transactions · doi:10.1039/c5dt01124h · Cited by 97
Self-citationHybrid binders: A journey from the past to a sustainable future (opus caementicium futurum)
Palomo, A., Monteiro, P. J. M., Martauz, P., Bílek, V., & Fernández‐Jiménez, A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105829 · Cited by 103
“The 29Si NMR spectra for the simulated Roman cements shown in Figure 9(b) exhibited a series of peaks that concurred with those observed for the hybrid cements essentially associated with the formation of a mix of C,N-A-S-H and C-S-A-H gels [12-13,68-69].”
BackgroundInfluentialReeb, C., Pierlot, C., Davy, C. A., & Lambertin, D. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.11.239 · Cited by 102
“The main reacting phases in OPC2 are Alite (C3S), Belite (C2S) and Celite (C3A and C4AF), which dissolution-precipitation reactions provide Calcium Aluminate and Silicate Hydrates (C-A-S-H); C-A-S-H are amorphous, with an atomic structure arrangement based on lamellar tobermorite models [27,28].”
BackgroundFan, M., Chen, F. X., Zhang, X. Y., Wang, R. K., & Yu, R. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132158 · Cited by 99
Chakraborty, S., Jo, B.-W., Jo, J. H., & Baloch, Z. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.059 · Cited by 93
Solubility and characterization of synthesized 11 Å Al-tobermorite
Lothenbach, B., Jansen, D. C., Yan, Y., & Schreiner, J. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106871 · Cited by 96
Geomechanical behaviour of a soft soil stabilised with alkali-activated blast-furnace slags
Corrêa-Silva, M., Miranda, T. F. D. S., Rouainia, M., Araújo, N. M. F., Glendinning, S., & Cristelo, N. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122017 · Cited by 95
Structure and Intrinsic Mechanical Properties of Nanocrystalline Calcium Silicate Hydrate
Li, J., Zhang, W., & Monteiro, P. J. M. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c03230 · Cited by 91
Metadata
- Authors
- Myers, R. J., Bernal, S. A., San Nicolas, R., & Provis, J. L.
- Affiliations
- The University of Melbourne (AU)
- Department of Chemical & Biomolecular Engineering, University of Melbourne, Victoria 3010, Australia
- Corresponding author
- Provis, John L.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-04-15
- Volume
- 29
- Issue
- 17
- Pages
- 5294-5306
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2069709155
- Cited by
- 579
- References
- 63
- Citations by year
- 2026: 62 · 2025: 57 · 2024: 70 · 2023: 62 · 2022: 77 · 2021: 36 · 2020: 34 · 2019: 39 · 2018: 31 · 2017: 33 · 2016: 27 · 2015: 25 · 2014: 19 · 2013: 7
- FWCI
- 56.43
- Type
- journal article
- Language
- en
- Open access
- Licence
- other-oa
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- Edinburgh Research Explorer (University of Edinburgh) (publishedVersion, other-oa)
- White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (acceptedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Keywords
- C-(N)-A-S-H gel, tobermorite, alkali-activated slag, structural model, tetrahedral aluminum, phase assemblage, cement hydration products
- MeSH terms
- Aluminum Silicates, Calcium, Cross-Linking Reagents, Gels, Models, Molecular, Sodium, Water, Molecular Structure, Calcium Compounds, Silicates
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.