Generalized Structural Description of Calcium–Sodium Aluminosilicate Hydrate Gels: The Cross-Linked Substituted Tobermorite Model
Open accessThe DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Abstract
Structural models for the primary strength and durability-giving reaction product in modern cements, a calcium (alumino)silicate hydrate gel, have previously been based solely on non-cross-linked tobermorite structures. However, recent experimental studies of laboratory-synthesized and alkali-activated slag (AAS) binders have indicated that the calcium-sodium aluminosilicate hydrate [C-(N)-A-S-H] gel formed in these systems can be significantly cross-linked. Here, we propose a model that describes the C-(N)-A-S-H gel as a mixture of cross-linked and non-cross-linked tobermorite-based structures (the cross-linked substituted tobermorite model, CSTM), which can more appropriately describe the spectroscopic and density information available for this material. Analysis of the phase assemblage and Al coordination environments of AAS binders shows that it is not possible to fully account for the chemistry of AAS by use of the assumption that all of the tetrahedral Al is present in a tobermorite-type C-(N)-A-S-H gel, due to the structural constraints of the gel. Application of the CSTM can for the first time reconcile this information, indicating the presence of an additional activation product that contains highly connected four-coordinated silicate and aluminate species. The CSTM therefore provides a more advanced description of the chemistry and structure of calcium-sodium aluminosilicate gel structures than that previously established in the literature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
(1997) · Emerald Group Publishing Limited eBooks · doi:10.1680/cc.25929 · Cited by 3,151
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Self-citationThe distribution of aluminum in the tetrahedra of silicates and aluminates
Loewenstein, W. B. (1954) · American Mineralogist · Cited by 1,794
Richardson, I. G. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.11.005 · Cited by 1,262
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
The nature of C-S-H in hardened cements
Richardson, I. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00168-4 · Cited by 1,133
Richardson, I. G. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.034 · Cited by 1,082
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Self-citation
Research works printed but not linked: 6
- Ben Haha M., 2011, Cem. Concr. Res., 41, 955, 10.1016/j.cemconres.2010.11.016 · DOI · Paper page
- McConnell J. D. C., 1954, Mineral. Mag., 30, 293
- Loewenstein W., 1954, Am. Mineral., 39, 92
- Tossell J. A., 1993, Am. Mineral., 78, 911
- Rawal A., 2010, J. Am. Ceram. Soc., 132, 7321
- Talling B., 1997, Waste Materials Used in Concrete Manufacturing, 235
Cited by
Items 501–579 of 579
Jee, H., & Garg, N. (2026) · Journal of Synchrotron Radiation · doi:10.1107/s1600577526006776 · Cited by 1
Gao, H., Alnahhal, M. F., Siddika, A., & Hajimohammadi, A. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106804 · Cited by 2
Choi, S., Seo, J., & Lee, H. K. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.117138 · Cited by 1
Jiao, Z., Zhang, H., Wang, Y., Xue, G., Lu, Z., Zhang, Q., Yan, R., & Tian, X. (2026) · Journal of the American Ceramic Society · doi:10.1111/jace.71206 · Cited by 1
“S–H. By-products such as hydrotalcite phases may also form [ 49, 51–53 ].”
Sahoo, P., & Gupta, S. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.148140 · Cited by 1
Goryunova, K., & Gahramanli, Y. N. (2026) · RSC Advances · doi:10.1039/d6ra05119g · Cited by 1
Ma, J., Lu, H., Wei, Y., & Wang, C. (2022) · Nature Environment and Pollution Technology · doi:10.46488/nept.2022.v21i02.021 · Cited by 2
“At pH 12, the weight of akermanite in slag increased, whereas that of gehlenite decreased, indicating that Ca ions were alkaline solutions, and calcium silicate hydrate (C-S-H) and calcium-sodium aluminosilicate hydrate [C-(N)-A-S-H] gels are also formed on the surface of slag (Myers et al. 2013).”
BackgroundIn situ sediment remediation with alkali-activated materials
Luukkοnen, T., & Laukkanen, J. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-88438-9.00018-1 · Cited by 1
Souayfan, F., Rozière, E., Paris, M., Deneele, D., Loukili, A., & Justino, C. (2024) · Materials · doi:10.3390/ma17153783 · Cited by 4
“The 29 Si NMR spectrum of activated slag shows well-defined peaks at chemical shifts of − 79 ppm, − 82 ppm, and − 85 ppm, corresponding respectively to Q 1 , Q 2 (1Al), and Q 2 sites in the C-A-S-H structure [43–46].”
BackgroundAlkali-activated slag material
Chen, P. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13498-2.00009-2 · Cited by 1
Reusing waste toner powder as functional additives for alkali-activated slag
Ren, J., Huang, X., Liu, J., Mao, J., Liang, C., Cheng, Z., Zhu, H., Xu, J., Dong, Z., Newlands, M. D., et al. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e04783 · Cited by 1
Yuan, Q., Xie, Z., Garba, M. J., Tian, Y., Wu, K., & Yang, C. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.113548 · Cited by 1
One-part alkali-activated concrete with seawater
Sun, Z. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85469-6.00010-6 · Cited by 1
Hassan, A., Arif, M., Shariq, M., & Mogalli, A. (2022) · Structural integrity · doi:10.1007/978-3-030-98335-2_3 · Cited by 1
Li, D., Qi, Q., Liu, Q., Zhu, J., & Bai, Z. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4535964 · Cited by 1
AN EXPERIMENTAL REVIEW OF THE REACTION PATHS FOLLOWED BY ALKALI-ACTIVATED SLAG CEMENTSPreprint
de Lacaillerie, J.-B. D., Paillard, C., Sanson, N., Palacios, M., Berté, A., Boustingorry, P., Jachiet, M., Giraudeau, C., & Kocaba, V. (2024) · ChemRxiv · doi:10.26434/chemrxiv-2024-2538j · Cited by 1
Nagy, N. M. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5275967 · Cited by 1
Das, S. K., & Suda, Y. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5560839 · Cited by 1
Effect of Sodium Silicate Properties in Alkali-Activation of Mexican Blast Furnace Slag
Cortés-Salmerón, O. F., García-Chávez, M. L., & Mejía, T. A. G. (2016) · MRS Proceedings · doi:10.1557/opl.2016.4
X-Ray Diffraction of Slag-Based Sodium Salt Waste Forms
Savannah River Site (SRS), A., Langton, C., USDOE Office of Environmental Management (EM), National Inst. of Standards and Technology (NIST), G., Vanderbilt Univ., N., & Missimer, D. M. (2014) · doi:10.2172/1150631
“86(8) 1389-94 (2003) Cement Activated Slag (1:1) Alkali Activated Slag (3.”
BackgroundNMR Studies of MRI Contrast Agents and Cementitous Materials
Peng, Z. (2013)
Rüscher, C. H., Rigo, E., Unterderweide, K., Krauss, H., & Jirasit, F. (2017) · Ceramic engineering and science proceedings · doi:10.1002/9781119321811.ch11
Phase composition of cement brick after different time of low temperature curing
Gnyrya, A. I., Abzaev, Y. A., & Korobkov, S. V. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/687/4/044001
Effect of curing temperature in the hydration of a belite cement with high level of fly ash
Qu, B., Sánchez‐Herrero, M. J., Martín, A., Pastor, J. Y., Palomo, A., & Fernández‐Jiménez, A. (2019)
Hamazaki, Y., & Takebe, H. (2021) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.20231
Endowing Strength to Calcium Silicate Hydrate (C-S-H) Powder by Cold-FusionPreprint
Zhang, Z., Yan, Y., Qu, Z., & Geng, G. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4002161
da Costa, H. N., Cabral, A. E. B., & Nogueira, R. E. F. Q. (2022) · Editora Científica Digital eBooks · doi:10.37885/221110900 · Cited by 1
Elchalakani, M., Yang, B., Mao, K., & Pham, T. M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-18876-3.00004-9
Balagosa, J., Lee, M. J., Choo, Y. W., Kim, H. S., & Kim, J. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4458089
Changes in Molecular Structure of Alkali Activated Slag Mortars Subjected to Accelerated LeachingPreprint
Nguyễn, T. N., Phung, Q. T., Jacques, D., Frederickx, L., Yu, Z., Dauzères, A., Sakellariou, D., Elsen, J., & Pontikes, Y. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4529339
Eco-Smart Demolition: Repurposing Industrial Waste for Effective Rock and Concrete FragmentationPreprint
Liyanage, J. B., Ranjith, P. G., Kumari, W. G. P., & Perera, T. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4584537
Eco-Smart Demolition: Repurposing Industrial Waste for Effective Rock and Concrete FragmentationPreprint
Liyanage, J. B., Ranjith, P. G., Kumari, W. G. P., & Perera, T. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4584546
Wang, C., Chen, P., & Wang, C. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4587450
Wang, C., Chen, P., & Wang, C. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4621620
Li, D., Qi, Q., Liu, Q., Zhu, J., & Bai, Z. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4622466
New Insights on the Basic Creep Mechanism of Alkali Activated Slag and Fly Ash PastePreprint
Gao, H., Shikov, I., Hamed, E., Hajimohammadi, A., Al‐Damad, I. M. A., Arns, C. H., & Foster, S. J. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4797411
The Effects of Calcium Carbonate on Sodium Metasilicate-Activated Metakaolin-Based Geopolymer PastesPreprint
Ren, J., Acarturk, C., Dowdy, N. D., & Srubar, W. V. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4805565
Alkali-activated slag cements and concrete
Puertas, F., & Torres‐Carrasco, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19165-7.00009-5 · Cited by 1
An Experimental Study on Compressive Properties of Composite Fiber Geopolymer Concrete
Li, J., Xu, X., & Wang, J. (2024) · Current Materials Science · doi:10.2174/0126661454308143240529060134
Co2 Mineralization Mechanism of Alkali-Activated Slag Paste Under High-Humidity Carbonation CuringPreprint
Zheng, D., Ni, L., Yang, S., & Cui, H. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4864781
The Effects of Calcium Carbonate on Sodium Metasilicate-Activated Metakaolin-Based Geopolymer PastesPreprint
Ren, J., Acarturk, C., Dowdy, N. D., & Srubar, W. V. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4881601
Zhu, J., Xu, L., Yu, R., Liu, X., Wang, S., & Wang, Z. (2024) · Journal of the American Ceramic Society · doi:10.1111/jace.20187
Properties of Fresh Alkali Activated Ferrous Metallurgy Slags
Sun, Z., & Fan, X. (2024) · Springer eBooks · doi:10.1007/978-981-97-6285-9_2
Cryogenic Stability of Calcium-Aluminosilicate-Hydrate
Jiang, Z., & Zhu, X. (2025) · Springer eBooks · doi:10.1007/978-981-96-1836-1_6 · Cited by 1
Calcium-Silicate-Hydrate (C-S-H)
(2025) · Springer eBooks · doi:10.1007/978-981-97-2998-2_162
Recycling mine tailings in chemically bonded ceramics – A reviewPreprint
Ismailov, A., Solismaa, S., Räisänen, M.-L., Levänen, E., Illikainen, M., & Kinnunen, P. (2018) · OSF Preprints (OSF Preprints)
Deng, Y., & Zhang, Z. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5479939
Modelling and Simulation of Alkali-Activated Materials
Zuo, Y., Göbel, L., Yliniemi, J., Provis, J. L., & Ye, G. (2026) · RILEM state-of-the-art reports · doi:10.1007/978-3-032-07116-3_5
Self-citationDelihowski, J., Pichniarczyk, P., Gobbin, F., Colombo, P., & Izak, P. (2026) · Applied Sciences · doi:10.3390/app16073481
Souayfan, F. (2021) · theses.fr (ABES) · doi:10.70675/e1c903a2zd57bz4585zbe0azfc6557453df3 · Cited by 2
Lou, J., Liang, Y., Zha, W., & Su, Q. (2026) · PLoS ONE · doi:10.1371/journal.pone.0348144
“This increases the degree of polymerization, refines the microstructure, and improves the later strength and impermeability of concrete [26–28].”
The role of gel chemistry on the photocatalytic performance of geopolymers: A critical review
Wilson, J., Ke, X., Maskell, D., & Ball, R. J. (2026) · Results in Materials · doi:10.1016/j.rinma.2026.100956
Gao, L., Jia, X., Zhang, Y., & Liu, J. (2026) · Advances in Civil Engineering · doi:10.1155/adce/6764699
Chen, W., He, Q., & Gong, K. (2026) · Journal of the American Ceramic Society · doi:10.1111/jace.71311
Nguyễn, H. H., Lương, Q.-H., Nguyễn, P. H., Kim, Y., & Lee, B. Y. (2026) · Developments in the Built Environment · doi:10.1016/j.dibe.2026.100972
A performance-based classification framework for standardising FA/GGBFS geopolymer binder systems
Alameri, I., Armoosh, S. R., Hanash, F. E., & Ahmed, M. A. A. (2026) · Discover Materials · doi:10.1007/s43939-026-00929-4
Shao, N., Jiao, Z., Dong, Z., Zhang, Z., & Wang, D. (2026) · Materials Today Chemistry · doi:10.1016/j.mtchem.2026.103800
Valorization of desalination reject brine in blended geopolymer composites
El‐Mir, A., Hwalla, J., Zafar, A. M., Hassan, A. A., El-Dieb, A., & El-Hassan, H. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.111735
Abdel‐Gawwad, H. A., Kim, S.-Y., Elrahman, M. A., Ji, Y., Lehmann, C. W., & Stephan, D. A. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106776 · Cited by 2
Duan, A., Qiu, M., & Liew, K. M. (2026) · Cement and Concrete Research · doi:10.1016/j.cemconres.2026.108343
Xing, Y., Wang, B., Xu, Y., Yu, H., Han, Z., & Zou, J. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106791 · Cited by 1
Bathily, S., Fall, M., & Mohammed, A. S. (2026) · Discover Concrete and Cement · doi:10.1007/s44416-026-00104-1
“These gels form through the dissolution of calcium, silicon, and aluminum from slag under alkaline conditions, followed by polymerization into a cross-linked amorphous network [6, 20, 29].”
InfluentialWang, Z., Lin, J., Zhang, X., Li, X., & Jiang, H. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.147884
Woo, S. Y., Kim, J.-H., Oh, T., Park, S., Banthia, N., & Yoo, D. (2026) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2026.111360
Xiang, J., Wang, Q., Yio, M., Lv, X., He, Y., Liu, L., & Cui, X. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.112691
Wang, M., Xu, J., Liu, H., Chen, H., & Yan, Z. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.147964
Chen, J., Liu, J., & Wang, R. (2026) · Journal of the Australian Ceramic Society · doi:10.1007/s41779-026-01436-8
Ma, Y., Ren, F., Gu, L., Shi, B., Liang, X., & Feng, J. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7411499
Chen, X., Wang, L., Jiang, H., Huang, C., Wen, Y., Zheng, Z., Zhou, M., & Meng, X. (2026) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2026.143626
Evaluating post-fire residual impact resistance of alkali-activated slag systems
Soliman, A., Abubakr, A., & Abdelazim, O. (2026) · Proceedings of the Institution of Civil Engineers - Construction Materials · doi:10.1680/jcoma.25.00117
ALKALI-ACTIVATED FOAM CONCRETE: MATERIALS, FOAMING METHODS, PORE STRUCTURE, AND DURABILITY
Bin, J. (2026) · Ceramics - Silikaty · doi:10.13168/cs.2026.0028
Gao, Y., Liu, Z., Wen, S., Zhang, X., Zhang, S., & Wang, D. (2026) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-23706
Fang, J., Du, Y., Shi, C., Zhou, F., Chen, R., & Guo, A. (2026) · Journal of Structural Engineering · doi:10.1061/jsendh.steng-16340
Sleiman, Y., Oifi, B. E., Martin, C., Saiyouri, N., & Sbartaï, Z. M. (2026) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2026.e06583
Alaoui, F. E. M., & Aalil, I. (2026) · Applied Clay Science · doi:10.1016/j.clay.2026.108407
Sim, S. (2026) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2026.e06608
Wang, L., Cheng, D., Li, K., Zheng, D., Shen, X., & Zhou, Z. (2026) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-23560
Kinda, J., ZAIDA, T. J., Malbila, E., & Zoma, F. (2026) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2026.100492
Ruan, S., Lu, J.-X., Tu, W., & Poon, C. S. (2026) · Cement and Concrete Research · doi:10.1016/j.cemconres.2026.108447
Metadata
- Authors
- Myers, R. J., Bernal, S. A., San Nicolas, R., & Provis, J. L.
- Affiliations
- The University of Melbourne (AU)
- Department of Chemical & Biomolecular Engineering, University of Melbourne, Victoria 3010, Australia
- Corresponding author
- Provis, John L.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-04-15
- Volume
- 29
- Issue
- 17
- Pages
- 5294-5306
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2069709155
- Cited by
- 579
- References
- 63
- Citations by year
- 2026: 62 · 2025: 57 · 2024: 70 · 2023: 62 · 2022: 77 · 2021: 36 · 2020: 34 · 2019: 39 · 2018: 31 · 2017: 33 · 2016: 27 · 2015: 25 · 2014: 19 · 2013: 7
- FWCI
- 56.43
- Type
- journal article
- Language
- en
- Open access
- Licence
- other-oa
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- Edinburgh Research Explorer (University of Edinburgh) (publishedVersion, other-oa)
- White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (acceptedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Keywords
- C-(N)-A-S-H gel, tobermorite, alkali-activated slag, structural model, tetrahedral aluminum, phase assemblage, cement hydration products
- MeSH terms
- Aluminum Silicates, Calcium, Cross-Linking Reagents, Gels, Models, Molecular, Sodium, Water, Molecular Structure, Calcium Compounds, Silicates
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.