The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Generalized Structural Description of Calcium–Sodium Aluminosilicate Hydrate Gels: The Cross-Linked Substituted Tobermorite Model
Open accessAbstract
Structural models for the primary strength and durability-giving reaction product in modern cements, a calcium (alumino)silicate hydrate gel, have previously been based solely on non-cross-linked tobermorite structures. However, recent experimental studies of laboratory-synthesized and alkali-activated slag (AAS) binders have indicated that the calcium-sodium aluminosilicate hydrate [C-(N)-A-S-H] gel formed in these systems can be significantly cross-linked. Here, we propose a model that describes the C-(N)-A-S-H gel as a mixture of cross-linked and non-cross-linked tobermorite-based structures (the cross-linked substituted tobermorite model, CSTM), which can more appropriately describe the spectroscopic and density information available for this material. Analysis of the phase assemblage and Al coordination environments of AAS binders shows that it is not possible to fully account for the chemistry of AAS by use of the assumption that all of the tetrahedral Al is present in a tobermorite-type C-(N)-A-S-H gel, due to the structural constraints of the gel. Application of the CSTM can for the first time reconcile this information, indicating the presence of an additional activation product that contains highly connected four-coordinated silicate and aluminate species. The CSTM therefore provides a more advanced description of the chemistry and structure of calcium-sodium aluminosilicate gel structures than that previously established in the literature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
(1997) · Emerald Group Publishing Limited eBooks · doi:10.1680/cc.25929 · Cited by 3,151
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Self-citationThe distribution of aluminum in the tetrahedra of silicates and aluminates
Loewenstein, W. B. (1954) · American Mineralogist · Cited by 1,794
Richardson, I. G. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.11.005 · Cited by 1,262
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
The nature of C-S-H in hardened cements
Richardson, I. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00168-4 · Cited by 1,133
Richardson, I. G. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.034 · Cited by 1,082
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Self-citation
Research works printed but not linked: 6
- Ben Haha M., 2011, Cem. Concr. Res., 41, 955, 10.1016/j.cemconres.2010.11.016 · DOI · Paper page
- McConnell J. D. C., 1954, Mineral. Mag., 30, 293
- Loewenstein W., 1954, Am. Mineral., 39, 92
- Tossell J. A., 1993, Am. Mineral., 78, 911
- Rawal A., 2010, J. Am. Ceram. Soc., 132, 7321
- Talling B., 1997, Waste Materials Used in Concrete Manufacturing, 235
Cited by
Items 101–200 of 579
Activator Anion Influences the Nanostructure of Alkali-Activated Slag Cements
Walkley, B., Ke, X., Provis, J. L., & Bernal, S. A. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c07328 · Cited by 98
Self-citationBinder Chemistry – Low-Calcium Alkali-Activated Materials
Provis, J. L., Fernández‐Jiménez, A., Kamseu, E., Leonelli, C., & Palomo, A. (2013) · RILEM state-of-the-art reports · doi:10.1007/978-94-007-7672-2_4 · Cited by 101
Self-citationWhite, C. E., Daemen, L. L., Hartl, M. A., & Page, K. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.08.006 · Cited by 88
Erfanimanesh, A., & Sharbatdar, M. K. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101781 · Cited by 90
Aboulayt, A., Souayfan, F., Rozière, E., Jaafri, R., Idrissi, A. C. E., Moussa, R., Justino, C., & Loukili, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120510 · Cited by 90
The effect of equilibration time on Al uptake in C-S-H
Barzgar, S., Tarik, M., Ludwig, C. D. R., & Lothenbach, B. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106438 · Cited by 85
New sights in early carbonation of calcium silicates: Performance, mechanism and nanostructure
Chen, T., Peng-ju, X., Gao, X., Wang, T., & Qin, L. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125622 · Cited by 85
Endowing strength to calcium silicate hydrate (C-S-H) powder by high pressure mechanical compaction
Zhang, Z., Yan, Y., Qu, Z., & Geng, G. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106858 · Cited by 84
Utilization of Mineral Wools as Alkali-Activated Material Precursor
Yliniemi, J., Kinnunen, P., Karinkanta, P., & Illikainen, M. (2016) · Materials · doi:10.3390/ma9050312 · Cited by 92
Immobilization of cesium with alkali-activated blast furnace slag
Komljenović, M. M., Tanasijević, G., Džunuzović, N., & Provis, J. L. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121765 · Cited by 86
“The results of this research seem to be in good agreement with the crosslinked substituted tobermorite model (CSTM) (Myers et al., 2013) that describes the C-(N)-A-S-H gel as a mixture of cross-linked and non-crosslinked tobermorite-based structures, which also included the presence of an additional activation product…”
BackgroundMethodResultInfluentialSelf-citationBabaee, M., & Castel, A. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.07.006 · Cited by 86
Mohammadinia, A., Arulrajah, A., D’Amico, A., & Horpibulsuk, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.103 · Cited by 89
C–(N)–S–H and N–A–S–H gels: Compositions and solubility data at 25°C and 50°C
Gómez-Zamorano, L. Y., Balonis, M., Erdemli, B., Neithalath, N., & Sant, G. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14715 · Cited by 81
“Further, Myers et al.(27) also presented solubility data of the C–A–S– H gels, including the effects of temperature on solubility equilibria for Ca/Si=1 and Al/Si≤0.”
BackgroundChloride binding and mobility in sodium carbonate-activated slag pastes and mortars
Ke, X., Bernal, S. A., Hussein, O. H., & Provis, J. L. (2017) · Materials and Structures · doi:10.1617/s11527-017-1121-8 · Cited by 90
Self-citationSadat, M. R., Muralidharan, K., & Zhang, L. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.04.041 · Cited by 80
Rakhimova, N. R., & Rakhimov, R. Z. (2019) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2019.01.025 · Cited by 78
CO2 binding capacity of alkali-activated fly ash and slag pastes
Nedeljković, M., Ghiassi, B., Melzer, S., Kooij, C., van der Laan, S. R., & Ye, G. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.07.216 · Cited by 82
“hydrate (N-A-S-H), calcium aluminosilicate hydrate (C-A-S-H), calcium sodium aluminosilicate hydrate (C-N-A-S-H) [13-15].”
BackgroundInfluentialNanoscale Charge-Balancing Mechanism in Alkali-Substituted Calcium–Silicate–Hydrate Gels
Özçelik, V. O., & White, C. E. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02233 · Cited by 76
Abdelzaher, M. A. (2023) · Applied Nanoscience · doi:10.1007/s13204-023-02766-w · Cited by 82
“The high silica content of UDW acts as active nuclei during the hydration process and promotes Tobermorite gel phase formation (Myers et al. 2013).”
BackgroundCabrera-Luna, K., Perez-Cortes, P., & Escalante-Garcia, J. I. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.105379 · Cited by 77
The Interfacial Transition Zone in Alkali-Activated Slag Mortars
Nicolas, R. S., & Provis, J. L. (2015) · Frontiers in Materials · doi:10.3389/fmats.2015.00070 · Cited by 77
Self-citation29Si and 27Al MAS NMR spectroscopic studies of activated metakaolin-slag mixtures
Souayfan, F., Rozière, E., Paris, M., Deneele, D., Loukili, A., & Justino, C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126415 · Cited by 84
Burciaga-Díaz, O., Gómez-Zamorano, L. Y., & Escalante-Garcia, J. I. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.111 · Cited by 79
Deterioration of alkali-activated mortars exposed to natural aggressive sewer environment
Khan, H. A., Khan, M. S. H., Castel, A., & Sunarho, J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.137 · Cited by 80
Alkali Activation of Ladle Slag from Steel-Making Process
Adesanya, E., Ohenoja, K., Kinnunen, P., & Illikainen, M. (2016) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-016-0089-x · Cited by 73
Yang, J. X., Hou, D., & Ding, Q. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01749 · Cited by 75
A mild alkali treated jute fibre controlling the hydration behaviour of greener cement paste
Jo, B.-W., & Chakraborty, S. (2015) · Scientific Reports · doi:10.1038/srep07837 · Cited by 82
Ma, B., Zhu, Z., Huo, W., Yang, L., Zhang, Y., Sun, H., & Zhang, X.-Q. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.106978 · Cited by 96
Passivity of embedded reinforcement in carbonated low-calcium fly ash-based geopolymer concrete
Babaee, M., Khan, M. S. H., & Castel, A. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.10.001 · Cited by 78
Atomistic simulation of polymer-cement interactions: Progress and research challenges
Bahraq, A. A., Al-Osta, M. A., Al‐Amoudi, O. S. B., Saleh, T. A., & Obot, I. B. B. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126881 · Cited by 71
Herrmann, A., Köenig, A., & Dehn, F. (2017) · Structural Concrete · doi:10.1002/suco.201700016 · Cited by 79
Sedaghatdoost, A., Behfarnia, K., Bayati, M., & Vaezi, M. S. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100871 · Cited by 73
Nanostructural evolution of alkali-activated mineral wools
Yliniemi, J., Walkley, B., Provis, J. L., Kinnunen, P., & Illikainen, M. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103472 · Cited by 75
“The presence of either crosslinking Q3(1Al) and Q3 species within C(N-)A-S-H [42,43] or fully polymerised Q4(4Al) and Q4(3Al) species within N-A-S-H [34,37,44], or a combination of both, was observed in the 29Si MAS NMR data for stone wool activated with Na2O⋅2SiO2.”
BackgroundInfluentialSelf-citationSun, Y., Liu, Z., Ghorbani, S., Ye, G., & Schutter, G. D. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133362 · Cited by 82
Chen, T., Li, L., Gao, X., Guo, M., & Qin, L. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.105103 · Cited by 69
Yang, D., Kow, K.-W., Wang, W., Meredith, W., Zhang, G., Mao, Y., & Xu, M. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.135677 · Cited by 72
Examination of alkali-activated material nanostructure during thermal treatment
Walkley, B., Kashani, A., Sani, M., Ngo, T., & Mendis, P. A. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2270-z · Cited by 70
“2, consistent with the composition of N-A-S(H) gels in alkali-activated metakaolin [72], statistical thermodynamic model predictions [42] and a generalised structural description of the additional N-A-S(H) gel reaction product formed in alkali-activated slag containing biphasic C-(N)-A-S-H/N-A-S-(H) gel blends from (2…”
BackgroundMethodInfluentialCrucial insights on the mix design of alkali-activated cement-based binders
García-Lodeiro, I., Palomo, A., & Fernández‐Jiménez, A. (2015) · Elsevier eBooks · doi:10.1533/9781782422884.1.49 · Cited by 88
Sotiriadis, K., Mácová, P., Mazur, A. S., Viani, A., Tolstoy, P. M., & Tsivilis, S. G. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.105995 · Cited by 69
Nanoscale Ordering and Depolymerization of Calcium Silicate Hydrates in the Presence of Alkalis
Garg, N., Özçelik, V. O., Skibsted, J., & White, C. E. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b06412 · Cited by 65
Tian, X., Rao, F., Morales‐Estrella, R., & Song, S. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b04493 · Cited by 65
Chemo-mechanical properties of alkali-activated slag/fly ash paste incorporating white mud
Sun, R., Fang, C., Zhang, H., Ling, Y., Feng, J., Qi, H., & Ge, Z. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123312 · Cited by 66
Zhu, X., Vandamme, M., Brochard, L., Zhang, Z., Ren, Q., Li, C., He, B., Zhang, H., Zhang, Y., Chen, Q., et al. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107131 · Cited by 63
Huseien, G. F., & Shah, K. W. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101234 · Cited by 64
A review on high-temperature resistance of geopolymer concrete
Liu, Y., Hu, X., Du, Y., Nematollahi, B., & Shi, C. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.111241 · Cited by 67
Shao, N., Tang, S., Li, S., Chen, H., & Zhang, Z. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121736 · Cited by 61
Engineering and micro-properties of alkali-activated slag pastes with Bayer red mud
Tian, K., Wang, Y., Dong, B., Fang, G., & Xing, F. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128869 · Cited by 63
Seo, J., Jang, D., Yang, B., Yoon, H. N., Jang, J. G., Park, S., & Lee, H. K. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104808 · Cited by 60
“(1) [64], was 14.92, 17.47, 22.53, 20.15, and 20.90 for the samples with TWCNT contents of 0, 0.1, 0.2, 0.3, and 0.5%, respectively.”
InfluentialNguyễn, H. H., Nguyễn, P. H., Lương, Q.-H., Meng, W., & Lee, B. Y. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.105155 · Cited by 60
Kinetics of Al uptake in synthetic calcium silicate hydrate (C-S-H)
Yan, Y., Bernard, E., Miron, G. D., Rentsch, D., Ma, B., Scrivener, K. L., & Lothenbach, B. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107250 · Cited by 63
Blast furnace slag-Mg(OH) 2 cements activated by sodium carbonate
Walling, S. A., Bernal, S. A., Gardner, L. J., Kinoshita, H., & Provis, J. L. (2018) · RSC Advances · doi:10.1039/c8ra03717e · Cited by 66
Self-citationLi, G., Tan, H., Zhang, J., Deng, X., Liu, X., & Luo, Z. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123378 · Cited by 60
Review on the Application of Supplementary Cementitious Materials in Self-Compacting Concrete
Pang, L., Liu, Z., Wang, D., & An, M. (2022) · Crystals · doi:10.3390/cryst12020180 · Cited by 65
“[72] proposed a structural m del to simulate this gel based on the cross-linked and non-cross-linked structure properties of C-(N) A-S-H, as shown in Figure 5.”
BackgroundMethodInfluentialA critical review on the interaction between calcium silicate hydrate (C-S-H) and different ions
Liu, X., Feng, P., Chen, J., Liu, Q., Yu, X., Cai, Y., Zhu, H., Qing, L., & Hong, J. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.134931 · Cited by 61
Dong, J., Chen, L., Li, L., Zhou, P., Shi, Z., Cai, J., & Zhang, T. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.135022 · Cited by 58
Schade, T., Bellmann, F., & Middendorf, B. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106706 · Cited by 59
Marple, M. A. T., Koroglu, B., Morrison, K., Crowhurst, J., Balachandra, A., Soroushian, P., & Mason, H. E. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106760 · Cited by 57
One-part alkali-activated blast furnace slag for sustainable construction at subzero temperatures
Alzaza, A., Ohenoja, K., & Illikainen, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.122026 · Cited by 56
Alkali-activated limestone/metakaolin cements exposed to high temperatures: Structural changes
Perez-Cortes, P., Cabrera-Luna, K., & Escalante-Garcia, J. I. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104147 · Cited by 57
Geng, Z., Zhang, L., Pan, H., She, W., Zhou, C., Zhou, H., Yu, Z., & Xu, Z. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136147 · Cited by 58
Geopolymers and Other Alkali-Activated Materials
Provis, J. L., & van Deventer, J. S. J. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-100773-0.00016-2 · Cited by 72
Self-citationBurciaga-Díaz, O. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.05.002 · Cited by 57
Ferrochrome ash – Its usage potential in alkali activated slag mortars
Kumar, B. C., Yaragal, S. C., & Das, B. B. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120577 · Cited by 58
Lu, C., Zhang, Z., Hu, J., Yu, Q., & Shi, C. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110271 · Cited by 58
Walkley, B., Nicolas, R. S., Sani, M., Gehman, J. D., van Deventer, J. S. J., & Provis, J. L. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.04.006 · Cited by 60
“present in alkali-activated slag binders [11, 20].”
Self-citationJung, M., Park, J., Hong, S., & Moon, J. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106214 · Cited by 55
Biricik, H., Kırgız, M. S., Galdino, A. G. D. S., Kenai, S., Mirza, J., Kinuthia, J. M., Ashteyat, A., Khitab, A., & Khatib, J. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.014 · Cited by 56
Modeling and simulation of alkali-activated materials (AAMs): A critical review
Zuo, Y., Chen, Y., Liu, C., Gan, Y., Göbel, L., Ye, G., & Provis, J. L. (2024) · Cement and Concrete Research · doi:10.1016/j.cemconres.2024.107769 · Cited by 64
Self-citationPredictions of long-term deflection of geopolymer concrete beams
Un, C. H., Sanjayan, J., Nicolas, R. S., & van Deventer, J. S. J. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.06.030 · Cited by 57
Influence of Microstructure of Geopolymer Concrete on Its Mechanical Properties—A Review
Hassan, A., Arif, M., & Shariq, M. (2019) · Lecture notes in civil engineering · doi:10.1007/978-981-13-7480-7_10 · Cited by 66
Mijarsh, M. J. A., Johari, M. A. M., & Ahmad, Z. A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.078 · Cited by 56
Zuo, Y., & Ye, G. (2018) · Materials · doi:10.3390/ma11061035 · Cited by 53
“of gels with low crystallinity that contain pores [7,8].”
BackgroundTrapote-Barreira, A., Porcar, L., Cama, J., Soler, J. M., & Allen, A. J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.02.009 · Cited by 52
“[42]) or the existence of jennite because some peaks or bands overlap.”
BackgroundMicrostructural Changes Induced by CO2 Exposure in Alkali-Activated Slag/Metakaolin Pastes
Bernal, S. A. (2016) · Frontiers in Materials · doi:10.3389/fmats.2016.00043 · Cited by 59
“As the main partially crystalline reaction products, tobermorite-type phases with three different basal spacings (9, 11, and 14 Å) were observed in these cements, most likely with some Al substitution (Myers et al., 2013).”
BackgroundSelf-citationSotiriadis, K., Hlobil, M., Viani, A., Mácová, P., & Vopálenský, M. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106566 · Cited by 53
Effect of synthetic CaO-Al2O3-SiO2-H2O on the early-stage performance of alkali-activated slag
Yang, J., Li, D., & Fang, Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.148 · Cited by 52
Zhu, H., Zhai, M., Liang, G., Li, H., Wu, Q., Zhang, C., & Hua, S. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102173 · Cited by 54
Alventosa, K. M. L., Wild, B., & White, C. E. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106742 · Cited by 51
Incorporation of Al and Na in Hydrothermally Synthesized Tobermorite
Wang, Z., Ma, S., Zheng, S., & Wang, X. (2016) · Journal of the American Ceramic Society · doi:10.1111/jace.14599 · Cited by 51
Alkali-activated grouts with incorporated fly ash: From NMR analysis to mechanical properties
Idrissi, A. C. E., Paris, M., Rozière, E., Deneele, D., Darson, S., & Loukili, A. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.01.012 · Cited by 53
Sankar, K., Sutrisno, A., & Kriven, W. M. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.16224 · Cited by 53
Mobasher, N., Bernal, S. A., Hussain, O. H., Apperley, D. C., Kinoshita, H., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.07.006 · Cited by 52
Self-citationRoadmap across the mesoscale for durable and sustainable cement paste – A bioinspired approach
Palkovic, S. D., Brommer, D. B., Kupwade‐Patil, K., Mašić, A., Buehler, M. J., & Büyüköztürk, O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.020 · Cited by 56
Cong, X., Zhou, W. J., & Elchalakani, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117977 · Cited by 48
The fate of iron in blast furnace slag particles during alkali-activation
Bernal, S. A., Rose, V., & Provis, J. L. (2014) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2014.03.017 · Cited by 50
Self-citationCement Interfaces: Current Understanding, Challenges, and Opportunities
Heinz, Ö., & Heinz, H. (2021) · Langmuir · doi:10.1021/acs.langmuir.1c00617 · Cited by 54
Rossi, L., de Lima, L. M., Sun, Y., Dehn, F., Provis, J. L., Ye, G., & Schutter, G. D. (2023) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2022.160 · Cited by 54
Self-citationValorization of waste perlite powder in geopolymer composites
El‐Mir, A., Hwalla, J., El-Hassan, H., Assaad, J. J., El-Dieb, A., & Shehab, E. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.130491 · Cited by 49
Zheng, Y., Rao, F., Yang, L., & Zhong, S. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104886 · Cited by 46
Recent Advances in Alternative Cementitious Materials for Nuclear Waste Immobilization: A Review
Rakhimova, N. R. (2022) · Sustainability · doi:10.3390/su15010689 · Cited by 58
Reaction kinetics and kinetics models of alkali activated phosphorus slag
Xie, F.-Z., Liu, Z., Zhang, D., Wang, J., Huang, T., & Wang, D. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117728 · Cited by 46
Decalcification of alkali-activated slag pastes. Effect of the chemical composition of the slag
Varga, C., Alonso, M. M., de Gutiérrez, R. M., Arcila, J. M. M., & Puertas, F. (2014) · Materials and Structures · doi:10.1617/s11527-014-0422-4 · Cited by 47
“polymerised high-silica gel formed when the calcium content in the original gel structure declines [8, 24, 34].”
BackgroundThermodynamic Modeling and Experimental Study of Carbonation of Alkali-Activated Slag Cements
Park, S., Lothenbach, B., Jang, J. G., Kim, H.-K., & Lee, N. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c05789 · Cited by 43
Thermodynamics and Molecular Mechanism of Al Incorporation in Calcium Silicate Hydrates
Churakov, S. V., & Labbez, C. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12850 · Cited by 46
Mohammadinia, A., Arulrajah, A., Phummiphan, I., Horpibulsuk, S., & Mirzababaei, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.031 · Cited by 44
Walkley, B., Page, S. J., Rees, G. J., Provis, J. L., & Hanna, J. V. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b10133 · Cited by 43
Self-citationYang, J., Li, D., & Fang, Y. (2017) · Materials · doi:10.3390/ma10070695 · Cited by 48
An experimental review of the reaction paths followed by alkali-activated slag pastes
Paillard, C., Sanson, N., Sanson, N., Palacios, M., Berté, A., Boustingorry, P., Giraudeau, C., Giraudeau, C., & Kocaba, V. (2024) · Cement and Concrete Research · doi:10.1016/j.cemconres.2024.107765 · Cited by 49
Effect of high-temperature on the microstructure of alkali-activated binder
Ramagiri, K. K., & Kar, A. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.01.093 · Cited by 43
Krivenko, P. V., Petropavlovskyi, O., & Kovalchuk, O. Y. (2018) · Eastern-European Journal of Enterprise Technologies · doi:10.15587/1729-4061.2018.119624 · Cited by 46
Metadata
- Authors
- Myers, R. J., Bernal, S. A., San Nicolas, R., & Provis, J. L.
- Affiliations
- The University of Melbourne (AU)
- Department of Chemical & Biomolecular Engineering, University of Melbourne, Victoria 3010, Australia
- Corresponding author
- Provis, John L.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-04-15
- Volume
- 29
- Issue
- 17
- Pages
- 5294-5306
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2069709155
- Cited by
- 579
- References
- 63
- Citations by year
- 2026: 62 · 2025: 57 · 2024: 70 · 2023: 62 · 2022: 77 · 2021: 36 · 2020: 34 · 2019: 39 · 2018: 31 · 2017: 33 · 2016: 27 · 2015: 25 · 2014: 19 · 2013: 7
- FWCI
- 56.43
- Type
- journal article
- Language
- en
- Open access
- Licence
- other-oa
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- Edinburgh Research Explorer (University of Edinburgh) (publishedVersion, other-oa)
- White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (acceptedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Keywords
- C-(N)-A-S-H gel, tobermorite, alkali-activated slag, structural model, tetrahedral aluminum, phase assemblage, cement hydration products
- MeSH terms
- Aluminum Silicates, Calcium, Cross-Linking Reagents, Gels, Models, Molecular, Sodium, Water, Molecular Structure, Calcium Compounds, Silicates
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.