The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Modeling of Oxygen-Inhibited Free Radical Photopolymerization in a PDMS Microfluidic Device
Abstract
Free-radical photopolymerization performed within PDMS microfluidic devices is now used for a variety of applications. We propose, through model and experiment, that atmospheric oxygen diffusing in through the porous PDMS is responsible for the presence, under UV light, of a thin, un-cross-linked film of oligomer abutting the walls of an all-PDMS device. After the advent of light exposure, an induction time τ i is required before the oxygen present in the oligomer is depleted, and cross-linking reactions can begin. A polymerized structure then grows from the center of the device outward, increasing sharply in height with time and leaving only a thin un-cross-linked film of thickness, δ i,c, close to the walls where oxygen can penetrate. Under suitable simplification of the reaction−diffusion model developed, scaling relationships were obtained for τ i (∼ D a −1 ) and δ i,c (∼ D a −1/2 ) as a function of a Damköhler number, D a . The relationships were successfully verified by comparison with both the full solution and experimental data. The analysis shows that control over particle height can be obtained more easily by changing initiator concentration, irradiation intensity, or channel height rather than exposure time.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Encyclopedia of polymer science and technology
(2003) · Choice Reviews Online · doi:10.5860/choice.41-0674 · Cited by 5,095
El-Ali, J., Sorger, P. K., & Jensen, K. F. (2006) · Nature · doi:10.1038/nature05063 · Cited by 2,102
Functional hydrogel structures for autonomous flow control inside microfluidic channels
Beebe, D. J., Moore, J. S., Bauer, J. M., Yu, Q., Liu, R. H., Devadoss, C., & Jo, B.-H. (2000) · Nature · doi:10.1038/35007047 · Cited by 1,971
Adaptive liquid microlenses activated by stimuli-responsive hydrogels
Dong, L., Agarwal, A. K., Beebe, D. J., & Jiang, H. (2006) · Nature · doi:10.1038/nature05024 · Cited by 1,051
Continuous-flow lithography for high-throughput microparticle synthesis
Dendukuri, D., Pregibon, D. C., Collins, J., Hatton, T. A., & Doyle, P. S. (2006) · Nature Materials · doi:10.1038/nmat1617 · Cited by 1,040
Self-citationMultiphase microfluidics: from flow characteristics to chemical and materials synthesis
Günther, A., & Jensen, K. F. (2006) · Lab Chip · doi:10.1039/b609851g · Cited by 983
Photopolymerization kinetics of multifunctional monomers
Andrzejewska, E. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00004-1 · Cited by 944
Lee, Y. S., Wetzel, E. D., & Wagner, N. J. (2003) · Journal of Materials Science · doi:10.1023/a:1024424200221 · Cited by 896
Multifunctional Encoded Particles for High-Throughput Biomolecule Analysis
Pregibon, D. C., Toner, M., & Doyle, P. S. (2007) · Science · doi:10.1126/science.1134929 · Cited by 726
Self-citationPhotoinitiation, photopolymerization, and photocuring : fundamentals and applications
Fouassier, J. (1995) · Cited by 533
Cited by
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Skin-inspired hydrogel–elastomer hybrids with robust interfaces and functional microstructures
Yuk, H., Zhang, T., Parada, G. A., Liu, X., & Zhao, X. (2016) · Nature Communications · doi:10.1038/ncomms12028 · Cited by 1,035
Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization
Ligon, S. C., Husár, B., Wutzel, H., Holman, R., & Liska, R. (2014) · Chemical Reviews · doi:10.1021/cr3005197 · Cited by 721
Stretchable Hydrogel Electronics and Devices
Lin, S., Yuk, H., Zhang, T., Parada, G. A., Koo, H., Yu, C., & Zhao, X. (2016) · Advanced Materials · doi:10.1002/adma.201504152 · Cited by 682
The Synthesis and Assembly of Polymeric Microparticles Using Microfluidics
Dendukuri, D., & Doyle, P. S. (2009) · Advanced Materials · doi:10.1002/adma.200803386 · Cited by 654
Self-citationPDMS microfluidics: A mini review
Raj M, K., & Chakraborty, S. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48958 · Cited by 481
One-step volumetric additive manufacturing of complex polymer structures
Shusteff, M., Browar, A. E. M., Kelly, B. E., Henriksson, J., Weisgraber, T. H., Panas, R. M., Fang, N. X., & Spadaccini, C. M. (2017) · Science Advances · doi:10.1126/sciadv.aao5496 · Cited by 375
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 332
Origami by Frontal Photopolymerization
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Science Advances · doi:10.1126/sciadv.1602326 · Cited by 256
Rapid continuous 3D printing of customizable peripheral nerve guidance conduits
Zhu, W., Tringale, K. R., Woller, S. A., You, S., Johnson, S., Shen, H., Schimelman, J., Whitney, M., Steinauer, J., Xu, W., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.04.001 · Cited by 253
Metadata
- Authors
- Dendukuri, D., Panda, P., Haghgooie, R., Kim, J. M., Hatton, T. A., & Doyle, P. S.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-10-22
- Volume
- 41
- Issue
- 22
- Pages
- 8547-8556
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1988219410
- Cited by
- 324
- References
- 27
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.