The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Elastic Moduli of Organic Electronic Materials by the Buckling Method
Abstract
Mechanical moduli of common organic electronic materials are measured by the buckling method. The organic layers were prepared on the elastomer polydimethylsiloxane (PDMS) substrate by transfer, direct spin-coating, or thermal evaporation. When a small (∼2%) compressive strain is applied to organic/PDMS film samples, the layer becomes buckled with a characteristic wavelength. Fitting the experimentally measured data of buckling wavelength as a function of layer thickness with a model equation yields the mechanical modulus of the organic layer. The measured values compare well with those from theoretical predictions for materials such as poly(3-hexylthiophene) (P3HT) and its blend with [6,6]-phenyl C 61 -butyric acid methyl ether (PCBM). The modulus of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is similar to that of pure PSS, which is contrary to the common expectation that the ionic interaction between PEDOT and PSS chains may lead to a modulus value 2−3 times larger than that of the constituent polymers. The similarity is likely due to a very small amount of PEDOT added and the oligomeric nature of PEDOT. Thermally evaporated pentacene film has a modulus value of ∼15 GPa, which is an order of magnitude larger than those of other polymeric materials investigated here, and reveals delamination bukling behavior when the magnitude of compression is relatively large. The residual solvent in polyaniline (PANI) plays the role of plasticizer and leads to a very small modulus. The measured mechanical moduli of common organic electronic materials would be valuable for designing and implementing flexible and/or stretchable organic electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
The path to ubiquitous and low-cost organic electronic appliances on plastic
Forrest, S. R. (2004) · Nature · doi:10.1038/nature02498 · Cited by 5,165
Poly(3,4-ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future
Groenendaal, L., Jonas, F., Freitag, D., Pielartzik, H., & Reynolds, J. R. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200004)12:7<481::aid-adma481>3.0.co;2-c · Cited by 3,420
Bowden, N., Brittain, S., Evans, A. G., Hutchinson, J. W., & Whitesides, G. M. (1998) · Nature · doi:10.1038/30193 · Cited by 2,305
Analysis and design of structural sandwich panels
Ogorkiewicz, R. M. (1970) · Composites · doi:10.1016/0010-4361(70)90244-2 · Cited by 1,759
A Stretchable Form of Single-Crystal Silicon for High-Performance Electronics on Rubber Substrates
Khang, D.-Y., Jiang, H., Huang, Y., & Rogers, J. A. (2006) · Science · doi:10.1126/science.1121401 · Cited by 1,689
Self-citationTransfer printing by kinetic control of adhesion to an elastomeric stamp
Meitl, M. A., Zhu, Z.-T., Kumar, V., Lee, K. J., Feng, X., Huang, Y. Y., Adesida, I., Nuzzo, R. G., & Rogers, J. A. (2006) · Nature Materials · doi:10.1038/nmat1532 · Cited by 1,548
Campoy-Quiles, M., Ferenczi, T., Agostinelli, T., Etchegoin, P. G., Kim, Y., Anthopoulos, T. D., Stavrinou, P. N., Bradley, D. D. C., & Nelson, J. (2008) · Nature Materials · doi:10.1038/nmat2102 · Cited by 1,453
Morphology of polymer/fullerene bulk heterojunction solar cells
Hoppe, H., & Sariciftci, N. S. (2006) · J. Mater. Chem. · doi:10.1039/b510618b · Cited by 1,414
A buckling-based metrology for measuring the elastic moduli of polymeric thin films
Stafford, C. M., Harrison, C., Beers, K. L., Karim, A., Amis, E. J., VanLandingham, M. R., Kim, H.-C., Volksen, W., Miller, R. D., & Simonyi, E. E. (2004) · Nature Materials · doi:10.1038/nmat1175 · Cited by 1,360
Cited by
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Two-dimensional flexible nanoelectronics
Akinwande, D., Petrone, N., & Hone, J. (2014) · Nature Communications · doi:10.1038/ncomms6678 · Cited by 1,910
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Root, S. E., Savagatrup, S., Printz, A. D., Rodriquez, D., & Lipomi, D. J. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00003 · Cited by 904
Stretchable Organic Solar Cells
Lipomi, D. J., Tee, B. C. ‐., Vosgueritchian, M., & Bao, Z. (2011) · Advanced Materials · doi:10.1002/adma.201004426 · Cited by 853
Organic Photodetectors for Next‐Generation Wearable Electronics
Chow, P. C. Y., & Someya, T. (2020) · Advanced Materials · doi:10.1002/adma.201902045 · Cited by 779
Stretchable and self-healing polymers and devices for electronic skin
Benight, S. J., Wang, C., Tok, J. B. H., & Bao, Z. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.08.001 · Cited by 617
Surface Wrinkling: A Versatile Platform for Measuring Thin‐Film Properties
Chung, J. Y., Nolte, A. J., & Stafford, C. M. (2011) · Advanced Materials · doi:10.1002/adma.201001759 · Cited by 590
Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable Substrates
Lipomi, D. J., Lee, J. A., Vosgueritchian, M., Tee, B. C.-K., Bolander, J. A., & Bao, Z. (2012) · Chemistry of Materials · doi:10.1021/cm203216m · Cited by 580
Harris, K. D., Elias, A. L., & Chung, H.-J. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9643-3 · Cited by 403
Savagatrup, S., Chan, E., Renteria‐Garcia, S. M., Printz, A. D., Zaretski, A. V., O'Connor, T. F., Rodriquez, D., Valle, E., & Lipomi, D. J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201401758 · Cited by 360
Wrinkled interfaces: Taking advantage of surface instabilities to pattern polymer surfaces
Rodríguez-Hernández, J. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.07.008 · Cited by 335
Strategies for body-conformable electronics
Liu, S., Rao, Y., Jang, H., Tan, P., & Lu, N. (2022) · Matter · doi:10.1016/j.matt.2022.02.006 · Cited by 306
High-frequency and intrinsically stretchable polymer diodes
Matsuhisa, N., Niu, S., O’Neill, S. J. K., Kang, J., Ochiai, Y., Katsumata, T., Wu, H.-C., Ashizawa, M., Wang, G.-J. N., Zhong, D., et al. (2021) · Nature · doi:10.1038/s41586-021-04053-6 · Cited by 299
Savagatrup, S., Printz, A. D., O'Connor, T. F., Zaretski, A. V., Rodriquez, D., Sawyer, E. J., Rajan, K. M., Acosta, R. I., Root, S. E., & Lipomi, D. J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02657h · Cited by 255
Ham, S., Kang, M., Jang, S., Jang, J., Choi, S., Kim, T.-W., & Wang, G. (2020) · Science Advances · doi:10.1126/sciadv.aba1178 · Cited by 184
Metadata
- Authors
- Tahk, D., Lee, H. H., & Khang, D.-Y.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-08-18
- Volume
- 42
- Issue
- 18
- Pages
- 7079-7083
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2017457306
- Cited by
- 257
- References
- 23
- FWCI
- 21.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.