Crystallization and Melting Behavior of Polylactides
The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
Six polylactides, polymerized with Salen−Al−OCH 3 initiator and having optical purities between 43% and 100%, were analyzed by differential scanning calorimetry, X-ray diffraction, and optical microscopy, following various crystallization conditions. It was found that each of those polylactides can crystallize, even those with low optical purities; their crystallization rate is, however, slower than those for high optical purity polyesters. Moreover, the low optical purity polymers tend to form stereocomplexes between the l and d sequences of the same polylactide, which behavior is ascribed to their multiblock microstructure. A correlation was found between the measured melting temperature of optically active polylactides and their average sequence length.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Typically, the T g of pure PCL is around -60 °C while for pure PLLA is around 60 ºC, depending on their molecular weight and tacticity. 29”
In the citing paper
“Similarly, the melting peak shoulder for PLLA 24 has been explained as a consequence of one or both phenomena. 49,51,55,58”
From Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA- b -PCL Diblock Copolymers (2010) · cites this paper as [58]
In the citing paper
“If we consider T m values reported in the literature, 55,58,60,61 then this critical value is apparently located at 30 -40kg/mol”
From Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA- b -PCL Diblock Copolymers (2010) · cites this paper as [58]
In the citing paper
“T m values can be strongly affected by molecular weight below a critical value.”
From Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA- b -PCL Diblock Copolymers (2010) · cites this paper as [58]
In the citing paper
“In the case of PLLA homopolymers, such double melting peaks during heating after isothermal crystallization have been reported and also evaluated. 13,49,51,52,56,58,73,77”
From Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA- b -PCL Diblock Copolymers (2010) · cites this paper as [58]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Mayo, F. R., & Lewis, F. M. (1944) · Journal of the American Chemical Society · doi:10.1021/ja01237a052 · Cited by 1,929
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Theory of crystallization in copolymers
Flory, P. J. (1955) · Transactions of the Faraday Society · doi:10.1039/tf9555100848 · Cited by 889
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibres
Eling, B., Gogolewski, S., & Pennings, A. J. (1982) · Polymer · doi:10.1016/0032-3861(82)90176-8 · Cited by 607
Molecular conformation of poly(S‐lactic acid)
De Santis, P., & Kovacs, A. J. (1968) · Biopolymers · doi:10.1002/bip.1968.360060305 · Cited by 575
Mechanism of the Stereocomplex Formation between Enantiomeric Poly(lactide)s
Brizzolara, D., Cantow, H.-J., Diederichs, K., Keller, E., & Domb, A. J. (1996) · Macromolecules · doi:10.1021/ma951144e · Cited by 547
General crystallization behaviour of poly(l-lactic acid)
Kalb, B., & Pennings, A. J. (1980) · Polymer · doi:10.1016/0032-3861(80)90315-8 · Cited by 421
Research works printed but not linked: 6
- Wisniewski M. Ph.D., 1995, Université Pierre et Marie Curie (Paris VI)
- Caron J. F. M.Sc., 1996, Laval University
- Loomis G. L., 1990, Polym. Prepr., 39, 55
- Boon J., 1968, J. Polym. Sci., Polym. Phys. Ed., 6, 1791
- Cartier L., 1996, Acad. Sci., Paris, Ser. 2b, 322, 429
- Jackson J. F., 1963, J. Polym. Sci., Part A, 1, 2119
Cited by
Items 201–300 of 525
Zhao, Y., Zhao, B., Wei, B., Wei, Y., Yao, J., Zhang, H., Chen, X., & Shao, Z. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.09.142 · Cited by 41
Enolic Schiff-base aluminum complexes and their application in lactide polymerization
Pang, X., Chen, X., Du, H., Wang, X., & Jing, X. (2007) · Journal of Organometallic Chemistry · doi:10.1016/j.jorganchem.2007.09.014 · Cited by 45
Otero, A., Lara‐Sánchez, A., Fernández‐Baeza, J., Alonso‐Moreno, C., Márquez‐Segovia, I., Sánchez‐Barba, L. F., Castro‐Osma, J. A., & Rodríguez, A. M. (2011) · Dalton Transactions · doi:10.1039/c0dt01678k · Cited by 40
Kryuchkov, M. A., Detrembleur, C., Jérôme, R., Prud'homme, R. E., & Bazuin, C. G. (2011) · Macromolecules · doi:10.1021/ma200449e · Cited by 41
Self-citationTsuji, H., Matsuoka, H., & Itsuno, S. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28986 · Cited by 42
Chen, C.-Y., Yang, C.-F., Jeng, U., & Su, A. (2014) · Macromolecules · doi:10.1021/ma501167e · Cited by 42
PLA/Coffee Grounds Composites: A Study of Photodegradation and Biodegradation in Soil
da Silva, A. P., Pereira, M. D. P., Passador, F. R., & Montagna, L. S. (2020) · Macromolecular Symposia · doi:10.1002/masy.202000091 · Cited by 43
Green synthesis of enantiomerically pure l-lactide and d-lactide using biogenic creatinine catalyst
Huang, W., Qi, Y., Cheng, N., Zong, X., Zhang, T., Jiang, W., Li, H., & Zhang, Q. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.022 · Cited by 41
Opaprakasit, P., Opaprakasit, M., & Tangboriboonrat, P. (2007) · Applied Spectroscopy · doi:10.1366/000370207783292235 · Cited by 41
Amphiphilic Conetworks and Gels Physically Cross-Linked via Stereocomplexation of Polylactide
Fan, X., Wang, M., Yuan, D., & He, C. (2013) · Langmuir · doi:10.1021/la403432y · Cited by 38
Effect of thermal annealing on crystal structure and properties of PLLA/PCL blend
Chen, J., Deng, C., Hong, R., Fu, Q., & Zhang, J. (2020) · Journal of Polymer Research · doi:10.1007/s10965-020-02206-1 · Cited by 41
Cracking in polylactide spherulites
Fraschini, C., Plesu, R., Sarasua, J., & Prud'homme, R. E. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20616 · Cited by 37
Self-citationTrilayered morphology of an ABC triple crystalline triblock terpolymer
Palacios, J. K., Tercjak, A., Liu, G., Wang, D., Zhao, J., Hadjichristidis, N., & Müller, A. J. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01576 · Cited by 37
Formation of Stereocomplex Crystal and Its Effect on the Morphology and Property of PDLA/PLLA Blends
Su, X., Feng, L., & Yu, D. (2020) · Polymers · doi:10.3390/polym12112515 · Cited by 39
Morphology and Properties of Poly( L ‐Lactide) (PLLA) Filled with Hollow Glass Beads
Hu, X., Hong-sheng, X., & Li, Z. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600504 · Cited by 40
Nurkhamidah, S., & Woo, E. M. (2011) · Colloid & Polymer Science · doi:10.1007/s00396-011-2544-3 · Cited by 38
Lefebvre, J., Lo, M., Gisselbrecht, J., Coulembier, O., Clément, S., & Richeter, S. (2013) · Chemistry - A European Journal · doi:10.1002/chem.201301483 · Cited by 43
Teamsinsungvon, A., Jarapanyacheep, R., Ruksakulpiwat, Y., & Jarukumjorn, K. (2017) · Polymer Science, Series A · doi:10.1134/s0965545x1703018x · Cited by 37
One-pot copolymerization of epoxides/carbon dioxide and lactide using a ternary catalyst system
Li, X., Hu, C., Pang, X., Duan, R., & Chen, X. (2018) · Catalysis Science & Technology · doi:10.1039/c8cy01856a · Cited by 37
Shirahama, H., Ichimaru, A., Tsutsumi, C., Nakayama, Y., & Yasuda, H. (2005) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20516 · Cited by 36
You, J., Yu, W., & Zhou, C. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402358h · Cited by 41
Kanchanasopa, M., Manias, E., & Runt, J. (2003) · Biomacromolecules · doi:10.1021/bm034063w · Cited by 37
Navarro-Baena, I., Kenny, J. M., & Peponi, L. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.03.012 · Cited by 36
Pang, X., Chen, X., Zhuang, X., & Jing, X. (2007) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22412 · Cited by 38
Studies on the Uncrosslinked Fraction of PLA/PBAT Blends Modified by Electron Radiation
Malinowski, R., Moraczewski, K., & Raszkowska‐Kaczor, A. (2020) · Materials · doi:10.3390/ma13051068 · Cited by 36
Song, P., Chen, G., Wei, Z., Zhang, W., & Liang, J. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2502-4 · Cited by 39
Schönlein, R., Larrañaga, X., Azkune, M., Li, Y., Liu, G., Müller, A. J., Aguirresarobe, R., & Ugartemendia, J. M. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01001 · Cited by 36
Shieh, Y., Liu, G., Twu, Y.-K., Wang, T.-L., & Yang, C. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21872 · Cited by 36
Sun, Z., Duan, R., Yang, J., Zhang, H., Li, S., Pang, X., Chen, W., & Chen, X. (2016) · RSC Advances · doi:10.1039/c6ra00289g · Cited by 35
The effect of the grafted chains on the crystallization of PLLA/PLLA-grafted SiO2 nanocomposites
Wu, F., Zhang, S., Zhang, B., Yang, W. M., Liu, Z., & Yang, M. (2016) · Colloid & Polymer Science · doi:10.1007/s00396-016-3830-x · Cited by 35
Zhang, X., Ding, W., Zhao, N. R., Chen, J., & Park, C. B. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04139 · Cited by 37
Su, X., Zhai, Y., Jia, C., Xu, Z., Luo, D., Pan, Z., Xiang, H., Yu, S., Zhu, L., & Zhu, M. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c06791 · Cited by 35
Fundamental of polymer blends and its thermodynamics
Mishra, J., Tiwari, S. K., Abolhasani, M. M., Azimi, S., & Nayak, G. C. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-101991-7.00002-9 · Cited by 41
Heterostereocomplexes Prepared from d-Poly(lactide) and Leuprolide. I. Characterization
Slager, J., & Domb, A. J. (2003) · Biomacromolecules · doi:10.1021/bm030023g · Cited by 34
Mecerreyes, D., Miller, R. D., Hedrick, J. L., Detrembleur, C., & J�r�me, R. (2000) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000301)38:5<870::aid-pola11>3.0.co;2-7 · Cited by 78
Novel blends of polylactide with ethylene glycol derivatives of POSS
Zubrowska, A., Piórkowska, E., Kowalewska, A., & Cichorek, M. (2014) · Colloid & Polymer Science · doi:10.1007/s00396-014-3344-3 · Cited by 34
Ahola, N., Männistö, N., Veiranto, M., Karp, M. T., Rich, J., Efimov, A., Seppälä, J. V., & Kellomäki, M. (2013) · Biomatter · doi:10.4161/biom.23162 · Cited by 36
Rydz, J., Wolna-Stypka, K., Musioł, M., Szeluga, U., Janeczek, H., & Kowalczuk, M. M. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.05.005 · Cited by 34
Chafran, L. S., Paiva, M. F., de França, J. O. C., Sales, M. J. A., Dias, S. C. L., & Dias, J. A. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e01810 · Cited by 36
Pluta, M., & Piórkowska, E. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.06.014 · Cited by 39
Plasticization of polylactide with block copolymers of ethylene glycol and propylene glycol
Kowalczyk, M., Pluta, M., Piórkowska, E., & Krasnikova, N. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36563 · Cited by 40
Sabbatier, G., Larrañaga, A., Guay‐Bégin, A., Fernandez, J., Diéval, F., Durand, B., Sarasua, J., & Laroche, G. (2015) · Macromolecular Bioscience · doi:10.1002/mabi.201500130 · Cited by 32
Self-citationLiu, R., He, B., Li, D., Lai, Y., Tang, J. Z., & Gu, Z. (2012) · Macromolecular Rapid Communications · doi:10.1002/marc.201100854 · Cited by 32
Aniśko, J., Barczewski, M., Mietliński, P., Piasecki, A., & Szulc, J. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107481 · Cited by 34
Zhong, Z., Dijkstra, P. J., & Feijén, J. (2004) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/1568562041271066 · Cited by 37
Grancharov, G., Coulembier, O., Surin, M., Lazzaroni, R., & Dúbois, P. (2010) · Macromolecules · doi:10.1021/ma1012336 · Cited by 33
Fujiwara, T., Yamaoka, T., Kimura, Y., & Wynne, K. J. (2005) · Biomacromolecules · doi:10.1021/bm050101v · Cited by 35
Cracks and Ring Bands of Poly(3-hydroxybutyrate) on Precrystallized Poly( l -lactic acid) Template
Nurkhamidah, S., & Woo, E. M. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1024547 · Cited by 33
Song, P., Sang, L., Jin, C., & Wei, Z. (2017) · Polymer · doi:10.1016/j.polymer.2017.11.069 · Cited by 32
Determination of d-lactate content in poly(lactic acid) using polarimetry
Feng, L., Sun, B., Bian, X., Chen, Z., & Chen, X. (2010) · Polymer Testing · doi:10.1016/j.polymertesting.2010.06.005 · Cited by 36
Fan, L., Xiong, Y., Xu, H. G., & Shen, Z. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.02.008 · Cited by 32
Běhálek, L., Borůvka, M., Brdlik, P. M., Habr, J., Lenfeld, P., Kroisová, D., Veselka, F., & Novák, J. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09894-3 · Cited by 33
Tham, W. L., Poh, B. T., Ishak, Z. A. M., & Chow, W. S. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42850 · Cited by 30
Han, L., Han, C., & Dong, L. (2013) · Polymer International · doi:10.1002/pi.4300 · Cited by 30
Iqbal, H. M. N., Sungkapreecha, C., & Androsch, R. (2016) · Polymer Bulletin · doi:10.1007/s00289-016-1854-5 · Cited by 32
Aliphatic Polyester-Based Biodegradable Microbeads for Sustainable Cosmetics
Nam, H. C., & Park, W. H. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00017 · Cited by 29
Lactide-caprolactone copolymers with tuneable barrier properties for packaging applications
Sangroniz, A., Sangroniz, L., Hamzehlou, S., del Río, J., Santamaría, A., Sarasua, J.-R., Iriarte, M., Leiza, J. R., & Etxeberria, A. (2020) · Polymer · doi:10.1016/j.polymer.2020.122681 · Cited by 32
Self-citationJariyavidyanont, K., Du, M., Yu, Q., Thurn‐Albrecht, T., Schick, C. H., & Androsch, R. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200148 · Cited by 34
Dobrosielska, M., Dobrucka, R., Brząkalski, D., Frydrych, M., Kozera, P., Wieczorek-Czarnocka, M., Jałbrzykowski, M., Kurzydłowski, K. J., & Przekop, R. E. (2022) · Materials · doi:10.3390/ma15103607 · Cited by 29
Safari, M., Kasmi, N., Pisani, C., Berthé, V., Müller, A. J., & Habibi, Y. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.06.056 · Cited by 30
Characterization of poly(lactic acid) multifilament yarns. I. The structure and thermal behavior
Radjabian, M., Kish, M. H., & Mohammadi, N. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32046 · Cited by 31
Cosme, J. G. L., da Silva, V. M., Nunes, R. C. R., & Picciani, P. H. S. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.74021 · Cited by 38
Present Situation and Future Perspectives of Poly(lactic acid)
Masutani, K., & Kimura, Y. (2017) · Advances in polymer science · doi:10.1007/12_2016_16 · Cited by 36
Tsuji, H., & Tajima, T. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400002 · Cited by 32
Efficient stereocomplex crystallization in enantiomeric blends of high molecular weight polylactides
López‐Rodríguez, N., de Arenaza, I. M., Meaurio, E., & Sarasua, J.-R. (2015) · RSC Advances · doi:10.1039/c4ra16994h · Cited by 28
Self-citationPang, X., Duan, R., Li, X., Sun, Z., Zhang, H., Wang, X., & Chen, X. (2014) · Polymer Chemistry · doi:10.1039/c4py00734d · Cited by 28
Torino, E., Aruta, R., Sibillano, T., Giannini, C., & Netti, P. A. (2016) · Scientific Reports · doi:10.1038/srep32727 · Cited by 32
Pluta, M., & Piórkowska, E. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.11.011 · Cited by 28
Peng, Y., Huang, Y., Chuang, H., Kuo, C.-Y., & Lin, C. (2010) · Polymer · doi:10.1016/j.polymer.2010.07.016 · Cited by 28
Liao, L., Dong, J., Shi, L., Fan, Z., Li, S., & Lü, Z. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.11.013 · Cited by 29
Tuneable hydrolytic degradation of poly(l-lactide) scaffolds triggered by ZnO nanoparticles
Lizundia, E., Mateos, P., & Vilas‐Vilela, J. L. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.02.104 · Cited by 28
Mysiukiewicz, O., & Barczewski, M. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47152 · Cited by 28
Eco-friendly poly(lactic acid) microbeads for cosmetics via melt electrospraying
Nam, H. C., & Park, W. H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.11.240 · Cited by 27
Abdallah, W., Mirzadeh, A., Tan, V., & Kamal, M. R. (2018) · Nanomaterials · doi:10.3390/nano9010029 · Cited by 29
“The degree of crystallinity XC is obtained by dividing the value of ∆Hm of each sample by the value of 106 J/g for ∆Hm* of 100% PLA as reported by Sarasua and co-workers [43].”
MethodFeng, L., Bian, X., Li, G., & Chen, X. (2022) · Macromolecules · doi:10.1021/acs.macromol.1c02599 · Cited by 29
Decomposition Behavior of Stereocomplex PLA Melt-Blown Fine Fiber Mats in Water and in Compost
Kara, Y., & Molnár, K. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02694-w · Cited by 31
“The fiber mat’s characteristics primarily depend on the degree of stereocomplexation [42].”
BackgroundDielectric properties of polylactides and their nanocomposites with montmorillonite
Jeszka, J. K., Pietrzak, Ł., Pluta, M., & Boiteux, G. (2010) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2009.06.057 · Cited by 27
Liu, W., Li, H., Wang, X., Du, Z., & Zhang, C. (2013) · Cellular Polymers · doi:10.1177/026248931303200602 · Cited by 28
The structure of crystallisable copolymers of l-lactide, ε-caprolactone and glycolide
Channuan, W., Siripitayananon, J., Molloy, R., Sriyai, M., Davis, F. J., & Mitchell, G. R. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.097 · Cited by 27
Silva, V. D. C., do Nascimento, T. G., Mergulhão, N. L. O. N., de Freitas, J. D., Duarte, I. F. B., de Bulhões, L. C. G., Dornelas, C. B., de Araújo‐Júnior, J. X., dos Santos, J., Silva, A. C. A., et al. (2022) · Molecules · doi:10.3390/molecules27206959 · Cited by 27
Stereocomplexation: From molecular structure to functionality of advanced polylactide systems
Raef, M., Sarasua, J.-R., Etxeberria, A., & Ugartemendia, J. M. (2023) · Polymer · doi:10.1016/j.polymer.2023.126066 · Cited by 28
Self-citationMa, C., Zhang, Y., Zhao, Z., Wang, J., Chen, Y., Qian, L., Fang, Z., Song, R., & Song, P. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.128378 · Cited by 26
Multifunctional ternary drug‐loaded electrospun scaffolds
Llorens, E., del Valle, L. J., & Puiggalí, J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42751 · Cited by 28
Nayab, S., & Jeong, J. H. (2013) · Polyhedron · doi:10.1016/j.poly.2013.04.052 · Cited by 27
PLLA/ZnO nanocomposites: Dynamic surfaces to harness cell differentiation
Trujillo, S., Lizundia, E., Vilas‐Vilela, J. L., & Salmerón‐Sánchez, M. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.04.007 · Cited by 26
Dry-spinning of cellulose nanocrystal/polylactic acid composite fibers
Clarkson, C. M., & Youngblood, J. P. (2018) · Green Materials · doi:10.1680/jgrma.17.00027 · Cited by 27
“A double melting peak is indicative of melt recrystallization in which imperfect crystals from the process melt at a lower temperature, recrystallize to form new crystals during the heating scan and subsequently remelt at a higher temperature.(33) This second peak, which occurs at temperatures 5–10°C lower than the pr…”
Crystallization behavior of zinc oxide/poly(lactic acid) nanocomposites
Faria, É. D. C., Dias, M. L., Ferreira, L. M., & Tavares, M. I. B. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-10166-3 · Cited by 27
Yu, C., Zhang, L., Ni, X., Shen, Z., & Tu, K. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20474 · Cited by 26
Hu, M., Deng, C., Gu, X., Fu, Q., & Zhang, J. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05380 · Cited by 26
Young's modulus of the different crystalline phases of poly (l-lactic acid)
Jariyavidyanont, K., Yu, Q., Petzold, A., Thurn‐Albrecht, T., Glüge, R., Altenbach, H., & Androsch, R. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105546 · Cited by 27
Tsuji, H., & Sobue, T. (2015) · RSC Advances · doi:10.1039/c5ra17096f · Cited by 26
Cracks in Polymer Spherulites: Phenomenological Mechanisms in Correlation with Ring Bands
Woo, E. M., & Lugito, G. (2016) · Polymers · doi:10.3390/polym8090329 · Cited by 26
He, Y., Wu, T. S., Wei, J., Fan, Z., & Li, S. (2008) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21430 · Cited by 24
Miscible Blends Based on Biodegradable Polymers
Meaurio, E., Hernandez‐Montero, N., Zuza, E., & Sarasua, J.-R. (2014) · Wiley eBooks · doi:10.1002/9783527645602.ch02 · Cited by 31
Self-citationAssimi, T. E., Beniazza, R., Raihane, M., Youcef, H. B., Meziane, A. E., Kricheldorf, H. R., & Lahcini, M. (2022) · Journal of Coatings Technology and Research · doi:10.1007/s11998-022-00613-1 · Cited by 25
Ugartemendia, J. M., Muñoz, M. E., Sarasua, J.-R., & Santamaría, A. (2014) · Rheologica Acta · doi:10.1007/s00397-014-0797-8 · Cited by 25
“A value ofΔHm°=106 J g −1 was used according to a reported enthalpy of melting of 100 % crystalline PLLA (Sarasua et al. 1998) and ΔHm°=139 J g −1 for 100 % of PCL (Crescenzi et al.”
BackgroundMethodSelf-citationHybrid nanofibers from biodegradable polylactide and polythiophene for scaffolds
Llorens, E., Pérez‐Madrigal, M. M., Armelin, E. A., del Valle, L. J., Puiggalı́, J., & Alemán, C. (2014) · RSC Advances · doi:10.1039/c3ra42829j · Cited by 23
Peng, B., Hou, H., Song, F., & Wu, L. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202192q · Cited by 26
Synthesis of poly(lactic acid) by heterogeneous acid catalysis from d,l-lactic acid
Chafran, L. S., Campos, J. M. C., dos Santos, J. S., Sales, M. J. A., Dias, S. C. L., & Dias, J. A. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-0976-7 · Cited by 24
“According to these curves, a polymer blend was formed, which is in agreement with the literature data [3, 15, 41, 42].”
BackgroundResultTsuji, H., & Matsumura, N. (2016) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201600042 · Cited by 24
Metadata
- Authors
- Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N.
- Affiliations
- Centre de recherche en sciences et ingénierie de macromolécules and Chemistry Department, Université Laval, Québec, Canada, G1K 7P4, Laboratoire de chimie macromoléculaire, Université Pierre et Marie Curie, 4 place Jussieu, 75252 Paris Cedex 05, France, and Laboratoire de physicochimie des polymères, UMR 27, Université de Paris XII, 2-8 rue Henri-Durant, 94320 Thiais, France
- Université Laval (CA)
- Corresponding author
- Prud'homme, Robert E.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-05-28
- Volume
- 31
- Issue
- 12
- Pages
- 3895-3905
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1978834341
- Cited by
- 525
- References
- 40
- Citations by year
- 2026: 13 · 2025: 11 · 2024: 8 · 2023: 20 · 2022: 26 · 2021: 15 · 2020: 15 · 2019: 16 · 2018: 21 · 2017: 30 · 2016: 34 · 2015: 26 · 2014: 39 · 2013: 26 · 2012: 37
- FWCI
- 5.72
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, crystallization, melting behavior, optical purity, stereocomplex, sequence length, crystallization rate, optically active polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.