The DOI matches its Crossref record.
Enhanced Thermoelectric Figure-of-Merit in p-Type Nanostructured Bismuth Antimony Tellurium Alloys Made from Elemental Chunks
Abstract
By ball milling alloyed bulk crystalline ingots into nanopowders and hot pressing them, we had demonstrated high figure-of-merit in nanostructured bulk bismuth antimony telluride. In this study, we use the same ball milling and hot press technique, but start with elemental chunks of bismuth, antimony, and tellurium to avoid the ingot formation step. We show that a peak ZT of about 1.3 in the temperature range of 75 and 100 degrees C has been achieved. This process is more economical and environmentally friendly than starting from alloyed bulk crystalline ingots. The ZT improvement is caused mostly by the lower thermal conductivity, similar as the case using ingot. Transmission electron microscopy observations of the microstructures suggest that the lower thermal conductivity is mainly due to the increased phonon scattering from the increased grain boundaries of the nanograins, precipitates, nanodots, and defects. Our material also exhibits a ZT of 0.7 at 250 degrees C, similar to the value obtained when ingot was used. This study demonstrates that high ZT values can be achieved in nanostructured bulk materials with ball milling elemental chunks, suggesting that the approach can be applied to other materials that are hard to be made into ingot, in addition to its advantage of lower manufacturing cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bulk nanostructured thermoelectric materials: current research and future prospects
Minnich, A. J., Dresselhaus, M. S., Ren, Z. F., & Chen, G. (2009) · Energy & Environmental Science · doi:10.1039/b822664b · Cited by 2,005
Self-citationHigh-performance flat-panel solar thermoelectric generators with high thermal concentration
Kraemer, D., Poudel, B., Feng, H.-P., Caylor, J. C., Yu, B., Yan, X., Ma, Y., Wang, X., Wang, D., Muto, A., et al. (2011) · Nature Materials · doi:10.1038/nmat3013 · Cited by 1,193
Self-citationEnhanced Thermoelectric Figure-of-Merit in Nanostructured p-type Silicon Germanium Bulk Alloys
Joshi, G., Lee, H., Lan, Y., Wang, X., Zhu, G., Wang, D., Gould, R. W., Cuff, D. C., Tang, M. Y., Dresselhaus, M. S., et al. (2008) · Nano Letters · doi:10.1021/nl8026795 · Cited by 1,119
Self-citationA review on thermoelectric renewable energy: Principle parameters that affect their performance
Hamid Elsheikh, M., Shnawah, D. A., Sabri, M. F. M., Said, S. B. M., Haji Hassan, M., Ali Bashir, M. B., & Mohamad, M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.10.027 · Cited by 958
Enhancement of Thermoelectric Figure‐of‐Merit by a Bulk Nanostructuring Approach
Lan, Y., Minnich, A. J., Chen, G., & Ren, Z. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901512 · Cited by 903
Self-citationNanostructured thermoelectric materials: Current research and future challenge
Chen, Z.-G., Han, G., Yang, L., Cheng, L., & Zou, J. (2012) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2012.11.011 · Cited by 825
Enhanced thermoelectric figure of merit in nanostructured n-type silicon germanium bulk alloy
Wang, X. W., Lee, H., Lan, Y. C., Zhu, G. H., Joshi, G., Wang, D. Z., Yang, J., Muto, A. J., Tang, M. Y., Klatsky, J., et al. (2008) · Applied Physics Letters · doi:10.1063/1.3027060 · Cited by 755
Self-citationExperimental Studies on Anisotropic Thermoelectric Properties and Structures of n-Type Bi2Te2.7Se0.3
Yan, X., Poudel, B., Ma, Y., Liu, W. S., Joshi, G., Wang, H., Lan, Y., Wang, D., Chen, G., & Ren, Z. F. (2010) · Nano Letters · doi:10.1021/nl101156v · Cited by 676
Self-citationMao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Self-citationRecent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
Studies on the Bi2Te3–Bi2Se3–Bi2S3system for mid-temperature thermoelectric energy conversion
Liu, W., Lukas, K. C., McEnaney, K., Lee, S., Zhang, Q., Opeil, C. P., Chen, G., & Ren, Z. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23549h · Cited by 310
Self-citationPromising Thermoelectric Bulk Materials with 2D Structures
Zhou, Y., & Zhao, L. (2017) · Advanced Materials · doi:10.1002/adma.201702676 · Cited by 304
Zhu, G. H., Lee, H., Lan, Y. C., Wang, X. W., Joshi, G., Wang, D. Z., Yang, J., Vashaee, D., Guilbert, H., Pillitteri, A., et al. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.196803 · Cited by 302
Self-citationUltralow Thermal Conductivity in Polycrystalline CdSe Thin Films With Controlled Grain Size
Feser, J. P., Chan, E. M., Majumdar, A., Segalman, R. A., & Urban, J. J. (2013) · Nano Letters · doi:10.1021/nl400531f · Cited by 83
Metadata
- Authors
- Ma, Y., Hao, Q., Poudel, B., Lan, Y., Yu, B., Wang, D., Chen, G., & Ren, Z.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-07-12
- Volume
- 8
- Issue
- 8
- Pages
- 2580-2584
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2107009410
- Cited by
- 556
- References
- 0
- FWCI
- 15.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.