The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Exfoliation of Graphite with Triazine Derivatives under Ball-Milling Conditions: Preparation of Few-Layer Graphene via Selective Noncovalent Interactions
Open accessAbstract
A ball-milling treatment can be employed to exfoliate graphite through interactions with commercially available melamine under solid conditions. This procedure allows the fast production of relatively large quantities of material with a low presence of defects. The milling treatment can be modulated in order to achieve graphene flakes with different sizes. Once prepared, the graphene samples can be redispersed in organic solvents, water, or culture media, forming stable dispersions that can be used for multiple purposes. In the present work, we have screened electron-rich benzene derivatives along with triazine derivatives in their respective ability to exfoliate graphite. The results suggest that the formation of a hydrogen-bonding network is important for the formation of multipoint interactions with the surfaces of graphene, which can be used for the exfoliation of graphite and the stabilization of graphene in different solvents. Aminotriazine systems were found to be the best partners in the preparation and stabilization of graphene layers in different solvents, while the equivalent benzene derivatives did not show comparable exfoliation ability. Computational studies have also been performed to rationalize the experimental results. The results provide also the basis for further work in the preparation of noncovalently modified graphene, where derivatives of aminotriazines can be designed to form extensive hydrogen-bond 2D networks on the graphene surface with the aim of manipulating their electronic and chemical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Density-functional exchange-energy approximation with correct asymptotic behavior
Becke, A. D. (1988) · Physical Review A · doi:10.1103/physreva.38.3098 · Cited by 53,711
Semiempirical GGA‐type density functional constructed with a long‐range dispersion correction
Grimme, S. (2006) · Journal of Computational Chemistry · doi:10.1002/jcc.20495 · Cited by 31,038
Hehre, W. J., Ditchfield, R., & Pople, J. A. (1972) · The Journal of Chemical Physics · doi:10.1063/1.1677527 · Cited by 15,855
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Density Functional Theory of Atoms and Molecules
Parr, R. G. (1980) · Horizons of Quantum Chemistry · doi:10.1007/978-94-009-9027-2_2 · Cited by 11,964
Ditchfield, R., Hehre, W. J., & Pople, J. A. (1971) · The Journal of Chemical Physics · doi:10.1063/1.1674902 · Cited by 10,612
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Raman spectroscopy as a versatile tool for studying the properties of graphene
Ferrari, A. C., & Basko, D. M. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.46 · Cited by 7,405
Van der Waals Density Functional for General Geometries
Dion, M., Rydberg, H., Schröder, E., Langreth, D. C., & Lundqvist, B. I. (2004) · Physical Review Letters · doi:10.1103/physrevlett.92.246401 · Cited by 5,622
Functionalization of Graphene: Covalent and Non-Covalent Approaches, Derivatives and Applications
Georgakilas, V., Otyepka, M., Bourlinos, A. B., Chandra, V., Kim, N., Kemp, K. C., Hobza, P., Zboril, R., & Kim, K. S. (2012) · Chemical Reviews · doi:10.1021/cr3000412 · Cited by 4,109
Cited by
A review on mechanical exfoliation for the scalable production of graphene
Yi, M., & Shen, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00252d · Cited by 1,736
Kumar, R., Sahoo, S., Joanni, E., Singh, R. K., Tan, W. K., Kar, K. K., & Matsuda, A. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100786 · Cited by 554
Two‐Dimensional Soft Nanomaterials: A Fascinating World of Materials
Zhuang, X., Mai, Y., Wu, D., Zhang, F., & Feng, X. (2015) · Advanced Materials · doi:10.1002/adma.201401857 · Cited by 514
Chemical functionalization and characterization of graphene-based materials
Bottari, G., Herranz, M. Á., Wibmer, L., Volland, M., Rodríguez-Pérez, L., Guldi, D. M., Hirsch, A., Martín, N., D'Souza, F., & Torres, T. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00229g · Cited by 441
General overview of graphene: Production, properties and application in polymer composites
Phiri, J., Gane, P., & Maloney, T. C. (2017) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2016.10.004 · Cited by 427
Mechanical, Thermal, and Electrical Properties of Graphene-Epoxy Nanocomposites—A Review
Atif, R., Shyha, I., & Inam, F. (2016) · Polymers · doi:10.3390/polym8080281 · Cited by 360
Yang, S., Brüller, S., Wu, Z.-S., Liu, Z., Parvez, K., Dong, R., Richard, F., Samorì, P., Feng, X., & Müllen, K. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09000 · Cited by 344
Mechanochemistry: New Tools to Navigate the Uncharted Territory of “Impossible” Reactions
Cuccu, F., De Luca, L., Delogu, F., Colacino, E., Solin, N., Mocci, R., & Porcheddu, A. (2022) · ChemSusChem · doi:10.1002/cssc.202200362 · Cited by 339
Top-down synthesis of graphene: A comprehensive review
Kumar, N., Salehiyan, R., Chauke, V., Joseph Botlhoko, O., Setshedi, K., Scriba, M., Masukume, M., & Sinha Ray, S. (2021) · FlatChem · doi:10.1016/j.flatc.2021.100224 · Cited by 336
Precision synthesis versus bulk-scale fabrication of graphenes
Wang, X.-Y., Narita, A., & Müllen, K. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0100 · Cited by 330
Bhattacharya, S., & Samanta, S. K. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00221 · Cited by 327
Electrochemical Zinc Ion Capacitors: Fundamentals, Materials, and Systems
Yin, J., Zhang, W., Alhebshi, N. A., Salah, N., & Alshareef, H. N. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100201 · Cited by 325
Scalable exfoliation and dispersion of two-dimensional materials – an update
Tao, H., Zhang, Y., Gao, Y., Sun, Z., Yan, C., & Texter, J. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06813h · Cited by 317
Li, Y., Yin, K., Wang, L., Lu, X., Zhang, Y., Liu, Y., Yan, D., Song, Y., & Luo, S. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.05.080 · Cited by 285
The Covalent Functionalization of Graphene on Substrates
Criado, A., Melchionna, M., Marchesan, S., & Prato, M. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201501473 · Cited by 284
Self-citationRecent advances in the synthesis and applications of graphene–polymer nanocomposites
Zhang, M., Li, Y., Su, Z., & Wei, G. (2015) · Polymer Chemistry · doi:10.1039/c5py00777a · Cited by 277
Graphene-based materials with tailored nanostructures for energy conversion and storage
Yang, Y., Han, C., Jiang, B., Iocozzia, J., He, C., Shi, D., Jiang, T., & Lin, Z. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.12.003 · Cited by 273
Graphene and its composites with nanoparticles for electrochemical energy applications
Li, Q., Mahmood, N., Zhu, J., Hou, Y., & Sun, S. (2014) · Nano Today · doi:10.1016/j.nantod.2014.09.002 · Cited by 256
Metadata
- Authors
- León, V., Rodriguez, A. M., Prieto, P., Prato, M., & Vázquez, E.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-13
- Volume
- 8
- Issue
- 1
- Pages
- 563-571
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W1988426693
- Cited by
- 279
- References
- 52
- FWCI
- 9.18
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.