The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Highly Thermally Conductive Papers with Percolative Layered Boron Nitride Nanosheets
Abstract
In this work, we report a dielectric nanocomposite paper with layered boron nitride (BN) nanosheets wired by one-dimensional (1D) nanofibrillated cellulose (NFC) that has superior thermal and mechanical properties. These nanocomposite papers are fabricated from a filtration of BN and NFC suspensions, in which NFC is used as a stabilizer to stabilize BN nanosheets. In these nanocomposite papers, two-dimensional (2D) nanosheets form a thermally conductive network, while 1D NFC provides mechanical strength. A high thermal conductivity has been achieved along the BN paper surface (up to 145.7 W/m K for 50 wt % of BN), which is an order of magnitude higher than that in randomly distributed BN nanosheet composites and is even comparable to the thermal conductivity of aluminum alloys. Such a high thermal conductivity is mainly attributed to the structural alignment within the BN nanosheet papers; the effects of the interfacial thermal contact resistance are minimized by the fact that the heat transfer is in the direction parallel to the interface between BN nanosheets and that a large contact area occurs between BN nanosheets.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials
Coleman, J. N., Lotya, M., O’Neill, A., Bergin, S. D., King, P. J., Khan, U., Young, K., Gaucher, A., De, S., Smith, R. J., et al. (2011) · Science · doi:10.1126/science.1194975 · Cited by 7,242
Boron nitride substrates for high-quality graphene electronics
Dean, C. R., Young, A. F., Meric, I., Lee, C., Wang, L., Sorgenfrei, S., Watanabe, K., Taniguchi, T., Kim, P., Shepard, K. L., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.172 · Cited by 7,124
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Han, Z., & Fina, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.004 · Cited by 2,603
Thermal Conductance of an Individual Single-Wall Carbon Nanotube above Room Temperature
Pop, E., Mann, D., Wang, Q., Goodson, K., & Dai, H. (2006) · Nano Letters · doi:10.1021/nl052145f · Cited by 1,852
Lin, Y., & Connell, J. W. (2012) · Nanoscale · doi:10.1039/c2nr32201c · Cited by 902
Interface effect on thermal conductivity of carbon nanotube composites
Nan, C.-W., Liu, G., Lin, Y., & Li, M. (2004) · Applied Physics Letters · doi:10.1063/1.1808874 · Cited by 860
Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy
Iwamoto, S., Kai, W., Isogai, A., & Iwata, T. (2009) · Biomacromolecules · doi:10.1021/bm900520n · Cited by 754
Song, S. H., Park, K. H., Kim, B. H., Choi, Y. W., Jun, G. H., Lee, D. J., Kong, B., Paik, K., & Jeon, S. (2013) · Advanced Materials · doi:10.1002/adma.201202736 · Cited by 667
Cited by
Recent development in 2D materials beyond graphene
Gupta, A., Sakthivel, T., & Seal, S. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.02.002 · Cited by 1,558
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Self-citationFunctionalized hexagonal boron nitride nanomaterials: emerging properties and applications
Weng, Q., Wang, X., Wang, X., Bando, Y., & Golberg, D. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00869g · Cited by 1,282
Thermal conductivity of polymers and polymer nanocomposites
Huang, C., Qian, X., & Yang, R. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.002 · Cited by 909
High-performance green flexible electronics based on biodegradable cellulose nanofibril paper
Jung, Y. H., Chang, T.-H., Zhang, H., Yao, C., Zheng, Q., Yang, V. W., Mi, H., Kim, M., Cho, S. J., Park, D.-W., et al. (2015) · Nature Communications · doi:10.1038/ncomms8170 · Cited by 891
Chen, J., Huang, X., Sun, B., & Jiang, P. (2019) · ACS Nano · doi:10.1021/acsnano.8b06290 · Cited by 768
Chen, J., Huang, X., Zhu, Y., & Jiang, P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604754 · Cited by 756
Preparation of 2D material dispersions and their applications
Cai, X., Luo, Y., Liu, B., & Cheng, H.-M. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00254a · Cited by 665
Thermal conductivity of 2D nano-structured boron nitride (BN) and its composites with polymers
Guerra, V., Wan, C., & McNally, T. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.10.002 · Cited by 606
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Baig, N. (2023) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107362 · Cited by 450
Cellulose Nanopaper: Fabrication, Functionalization, and Applications
Liu, W., Liu, K., Du, H., Zheng, T., Zhang, N., Xu, T., Pang, B., Zhang, X., Si, C., & Zhang, K. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00849-x · Cited by 435
Nanocellulose in Sensing and Biosensing
Golmohammadi, H., Morales-Narváez, E., Naghdi, T., & Merkoçi, A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01170 · Cited by 402
Wu, K., Wang, J., Liu, D., Lei, C., Liu, D., Lei, W., & Fu, Q. (2020) · Advanced Materials · doi:10.1002/adma.201906939 · Cited by 400
Chen, S., Xu, R., Liu, J., Zou, X., Qiu, L., Kang, F., Liu, B., & Cheng, H. (2019) · Advanced Materials · doi:10.1002/adma.201804810 · Cited by 385
Chen, J., Huang, X., Sun, B., Wang, Y., Zhu, Y., & Jiang, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08061 · Cited by 375
Yang, W., Zhao, Z., Wu, K., Huang, R., Liu, T., Jiang, H., Chen, F., & Fu, Q. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00400a · Cited by 363
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
Self-citationCheng, P., Chen, X., Gao, H., Zhang, X., Tang, Z., Li, A., & Wang, G. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105948 · Cited by 348
3D Printed High‐Performance Lithium Metal Microbatteries Enabled by Nanocellulose
Cao, D., Xing, Y., Tantratian, K., Wang, X., Ma, Y., Mukhopadhyay, A., Cheng, Z., Zhang, Q., Jiao, Y., Chen, L., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807313 · Cited by 337
Self-citation2D boron nitride nanosheets for polymer composite materials
Rasul, M. G., Kiziltas, A., Arfaei, B., & Shahbazian-Yassar, R. (2021) · npj 2D Materials and Applications · doi:10.1038/s41699-021-00231-2 · Cited by 332
Nanoporous Boron Nitride Aerogel Film and Its Smart Composite with Phase Change Materials
Wang, B., Li, G., Xu, L., Liao, J., & Zhang, X. (2020) · ACS Nano · doi:10.1021/acsnano.0c05931 · Cited by 322
Nanocellulose as green dispersant for two-dimensional energy materials
Li, Y., Zhu, H., Shen, F., Wan, J., Lacey, S., Fang, Z., Dai, H., & Hu, L. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.02.015 · Cited by 322
Self-citationSong, N., Jiao, D., Cui, S., Hou, X., Ding, P., & Shi, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11979 · Cited by 317
Yao, Y., Zeng, X., Wang, F., Sun, R., Xu, J.-B., & Wong, C.-P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04187 · Cited by 279
Self-citationShen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
High temperature thermal management with boron nitride nanosheets
Wang, Y., Xu, L., Yang, Z., Xie, H., Jiang, P., Dai, J., Luo, W., Yao, Y., Hitz, E., Yang, R., et al. (2018) · Nanoscale · doi:10.1039/c7nr07058f · Cited by 66
Self-citation
Metadata
- Authors
- Zhu, H., Li, Y., Fang, Z., Xu, J., Cao, F., Wan, J., Preston, C., Yang, B., & Hu, L.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-03-17
- Volume
- 8
- Issue
- 4
- Pages
- 3606-3613
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2052109744
- Cited by
- 493
- References
- 30
- FWCI
- 14.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.