The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Exceptional Electrical Conductivity and Fracture Resistance of 3D Interconnected Graphene Foam/Epoxy Composites
Abstract
Cellular-structured graphene foam (GF)/epoxy composites are prepared based on a three-step fabrication process involving infiltration of epoxy into the porous GF. The three-dimensional (3D) GF is grown on a Ni foam template via chemical vapor deposition. The 3D interconnected graphene network serves as fast channels for charge carriers, giving rise to a remarkable electrical conductivity of the composite, 3 S/cm, with only 0.2 wt % GF. The corresponding flexural modulus and strength increase by 53 and 38%, respectively, whereas the glass transition temperature increases by a notable 31 °C, compared to the solid neat epoxy. The GF/epoxy composites with 0.1 wt % GF also deliver an excellent fracture toughness of 1.78 MPa·m(1/2), 34 and 70% enhancements against their "porous" epoxy and solid epoxy counterparts, respectively. These observations signify the unrivalled effectiveness of 3D GF relative to 1D carbon nanotubes or 2D functionalized graphene sheets as reinforcement for polymer composites without issues of nanofiller dispersion and functionalization prior to incorporation into the polymer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Large Area, Few-Layer Graphene Films on Arbitrary Substrates by Chemical Vapor Deposition
Reina, A., Jia, X., Ho, J., Nezich, D., Son, H., Bulovic, V., Dresselhaus, M. S., & Kong, J. (2009) · Nano Letters · doi:10.1021/nl801827v · Cited by 5,881
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Functionalized graphene sheets for polymer nanocomposites
Ramanathan, T., Abdala, A. A., Stankovich, S., Dikin, D. A., Herrera-Alonso, M., Piner, R. D., Adamson, D. H., Schniepp, H. C., Chen, X., Ruoff, R. S., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.96 · Cited by 3,470
Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content
Reif, J., Rafiee, J., Wang, Z., Song, H., Yu, Z.-Z., & Koratkar, N. (2009) · ACS Nano · doi:10.1021/nn9010472 · Cited by 2,890
Chen, Z., Xu, C., Ma, C., Ren, W., & Cheng, H. (2013) · Advanced Materials · doi:10.1002/adma.201204196 · Cited by 1,986
Gojny, F. H., Wichmann, M. H. G., Fiedler, B., & Schulte, K. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.04.021 · Cited by 1,357
Covalent polymer functionalization of graphene nanosheets and mechanical properties of composites
Fang, M., Wang, K., Lu, H., Yang, Y., & Nutt, S. (2009) · Journal of Materials Chemistry · doi:10.1039/b908220d · Cited by 1,309
The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Tang, L.-C., Wan, Y.-J., Yan, D., Pei, Y.-B., Zhao, L., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.050 · Cited by 1,169
Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes
Li, J., Ma, P. C., Chow, W. S., To, C. K., Tang, B. Z., & Kim, J. ‐. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200700065 · Cited by 1,104
Self-citationFunctional Composite Materials Based on Chemically Converted Graphene
Bai, H., Li, C., & Shi, G. (2011) · Advanced Materials · doi:10.1002/adma.201003753 · Cited by 1,080
Wide-band negative permeability of nonlinear metamaterials
Lapine, M., Shadrivov, I., & Kivshar, Y. (2012) · Scientific Reports · doi:10.1038/srep00412 · Cited by 1,017
Graphene Films with Large Domain Size by a Two-Step Chemical Vapor Deposition Process
Li, X., Magnuson, C. W., Venugopal, A., An, J., Suk, J. W., Han, B., Borysiak, M., Cai, W., Velamakanni, A., Zhu, Y., et al. (2010) · Nano Letters · doi:10.1021/nl101629g · Cited by 933
Fracture and Fatigue in Graphene Nanocomposites
Reif, J., Rafiee, J., Srivastava, I., Wang, Z., Song, H., Yu, Z., & Koratkar, N. (2010) · Small · doi:10.1002/smll.200901480 · Cited by 907
Quantitative equivalence between polymer nanocomposites and thin polymer films
Bansal, A., Yang, H., Li, C., Cho, K., Benicewicz, B. C., Kumar, S. K., & Schadler, L. S. (2005) · Nature Materials · doi:10.1038/nmat1447 · Cited by 716
Model polymer nanocomposites provide an understanding of confinement effects in real nanocomposites
Rittigstein, P., Priestley, R. D., Broadbelt, L. J., & Torkelson, J. M. (2007) · Nature Materials · doi:10.1038/nmat1870 · Cited by 691
Processing-property relationships of polycarbonate/graphene composites
Kim, H., & Macosko, C. W. (2009) · Polymer · doi:10.1016/j.polymer.2009.05.038 · Cited by 669
Chatterjee, S., Nafezarefi, F., Tai, N. H., Schlagenhauf, L., Nüesch, F. A., & Chu, B. T. T. (2012) · Carbon · doi:10.1016/j.carbon.2012.07.021 · Cited by 659
One‐Step Electrochemical Synthesis of Graphene/Polyaniline Composite Film and Its Applications
Feng, X., Li, R., Ma, Y., Chen, R., Shi, N., Fan, Q., & Huang, W. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100038 · Cited by 542
Chemical Vapor Deposition-Grown Graphene: The Thinnest Solid Lubricant
Kim, K.-S., Lee, H.-J., Lee, C., Lee, S.-K., Jang, H., Ahn, J.-H., Kim, J.-H., & Lee, H.-J. (2011) · ACS Nano · doi:10.1021/nn2011865 · Cited by 538
Self-citationImpressive Fatigue Life and Fracture Toughness Improvements in Graphene Oxide/Epoxy Composites
Bortz, D. R., Heras, E. G., & Martin-Gullon, I. (2012) · Macromolecules · doi:10.1021/ma201563k · Cited by 514
Failure mechanisms in toughened epoxy resins—A review
Garg, A. C., & Mai, Y. (1988) · Composites Science and Technology · doi:10.1016/0266-3538(88)90009-7 · Cited by 485
Self-citationUltrathin Graphite Foam: A Three-Dimensional Conductive Network for Battery Electrodes
Ji, H., Zhang, L., Pettes, M. T., Li, H., Chen, S., Shi, L., Piner, R., & Ruoff, R. S. (2012) · Nano Letters · doi:10.1021/nl300528p · Cited by 410
Lin, X., Shen, X., Zheng, Q., Yousefi, N., Ye, L., Mai, Y.-W., & Kim, J.-K. (2012) · ACS Nano · doi:10.1021/nn303904z · Cited by 389
Self-citationThe Effect of Interlayer Adhesion on the Mechanical Behaviors of Macroscopic Graphene Oxide Papers
Gao, Y., Liu, L.-Q., Zu, S.-Z., Peng, K., Zhou, D., Han, B.-H., & Zhang, Z. (2011) · ACS Nano · doi:10.1021/nn103331x · Cited by 354
Yousefi, N., Gudarzi, M. M., Zheng, Q., Aboutalebi, S. H., Sharif, F., & Kim, J.-K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30590a · Cited by 299
Self-citationYousefi, N., Gudarzi, M. M., Zheng, Q., Lin, X., Shen, X., Jia, J., Sharif, F., & Kim, J.-K. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.02.005 · Cited by 278
Self-citationFang, M., Zhang, Z., Li, J., Zhang, H., Lu, H., & Yang, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01620a · Cited by 275
Yousefi, N., Lin, X., Zheng, Q., Shen, X., Pothnis, J. R., Jia, J., Zussman, E., & Kim, J.-K. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.034 · Cited by 272
Self-citationChen, T., Deng, F., Zhu, J., Chen, C., Sun, G., Ma, S., & Yang, X. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31171b · Cited by 265
Geometry Controls Conformation of Graphene Sheets: Membranes, Ribbons, and Scrolls
Xu, Z., & Buehler, M. J. (2010) · ACS Nano · doi:10.1021/nn100575k · Cited by 245
Fracture toughness of natural fibers/castor oil polyurethane composites
Silva, R. V., Spinelli, D., Bose Filho, W. W., Claro Neto, S., Chierice, G. O., & Tarpani, J. R. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.012 · Cited by 243
Exceptional thermal interface properties of a three-dimensional graphene foam
Zhang, X., Yeung, K. K., Gao, Z., Li, J., Sun, H., Xu, H., Zhang, K., Zhang, M., Chen, Z., Yuen, M. M. F., et al. (2013) · Carbon · doi:10.1016/j.carbon.2013.08.059 · Cited by 106
The thermal and mechanical properties of graphite foam/epoxy resin composites
Chen, X., Lü, Y., Zhang, X., et al. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.04.026 · Cited by 28
Cited by
Advances in Polyimide‐Based Materials for Space Applications
Gouzman, I., Grossman, E., Verker, R., Atar, N., Bolker, A., & Eliaz, N. (2019) · Advanced Materials · doi:10.1002/adma.201807738 · Cited by 732
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Hu, J., Huang, Y., Yao, Y., Pan, G., Sun, J., Zeng, X., Sun, R., Xu, J.-B., Song, B., & Wong, C.-P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02410 · Cited by 499
Recent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Self-citationGraphene-based wearable piezoresistive physical sensors
Zheng, Q., Lee, J.-H., Shen, X., Chen, X., & Kim, J.-K. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.004 · Cited by 486
Self-citation
Metadata
- Authors
- Jia, J., Sun, X., Lin, X., Shen, X., Mai, Y.-W., & Kim, J.-K.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-05-27
- Volume
- 8
- Issue
- 6
- Pages
- 5774-5783
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2015805422
- Cited by
- 332
- References
- 37
- FWCI
- 15.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.