The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Vacuum-Assisted Thermal Annealing of CH3NH3PbI3for Highly Stable and Efficient Perovskite Solar Cells
Open accessAbstract
Solar cells incorporating lead halide-based perovskite absorbers can exhibit impressive power conversion efficiencies (PCEs), recently surpassing 15%. Despite rapid developments, achieving precise control over the morphologies of the perovskite films (minimizing pore formation) and enhanced stability and reproducibility of the devices remain challenging, both of which are necessary for further advancements. Here we demonstrate vacuum-assisted thermal annealing as an effective means for controlling the composition and morphology of the CH(3)NH(3)PbI(3) films formed from the precursors of PbCl(2) and CH(3)NH(3)I. We identify the critical role played by the byproduct of CH(3)NH(3)Cl on the formation and the photovoltaic performance of the perovskite film. By completely removing the byproduct through our vacuum-assisted thermal annealing approach, we are able to produce pure, pore-free planar CH(3)NH(3)PbI(3) films with high PCE reaching 14.5% in solar cell device. Importantly, the removal of CH(3)NH(3)Cl significantly improves the device stability and reproducibility with a standard deviation of only 0.92% in PCE as well as strongly reducing the photocurrent hysteresis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Self-citationKim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationEfficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Self-citationInterface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Liang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites
Wehrenfennig, C., Eperon, G. E., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2014) · Advanced Materials · doi:10.1002/adma.201305172 · Cited by 3,239
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
Li, X., Bi, D., Yi, C., Décoppet, J.-D., Luo, J., Zakeeruddin, S. M., Hagfeldt, A., & Grätzel, M. (2016) · Science · doi:10.1126/science.aaf8060 · Cited by 1,915
Self-citationOrganic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide
Min, H., Kim, M., Lee, S.-U., Kim, H., Kim, G., Choi, K., Lee, J. H., & Seok, S. I. (2019) · Science · doi:10.1126/science.aay7044 · Cited by 1,268
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Zhang, X., Lin, H., Huang, H., Reckmeier, C., Zhang, Y., Choy, W. C. H., & Rogach, A. L. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04959 · Cited by 731
Self-citationA polymer scaffold for self-healing perovskite solar cells
Zhao, Y., Wei, J., Li, H., Yan, Y., Zhou, W., Yu, D., & Zhao, Q. (2016) · Nature Communications · doi:10.1038/ncomms10228 · Cited by 667
Wu, Y., Xie, F., Chen, H., Yang, X., Su, H., Cai, M., Zhou, Z., Noda, T., & Han, L. (2017) · Advanced Materials · doi:10.1002/adma.201701073 · Cited by 634
Self-citationRan, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
Zhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Self-citationPlanar heterojunction organometal halide perovskite solar cells: roles of interfacial layers
Kim, H., Lim, K.-G., & Lee, T.-W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02194d · Cited by 507
Mosconi, E., Azpiroz, J. M., & De Angelis, F. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01991 · Cited by 486
Inverted Perovskite Solar Cells: Progresses and Perspectives
Liu, T., Chen, K., Hu, Q., Zhu, R., & Gong, Q. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600457 · Cited by 483
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?
Liu, F., Dong, Q., Wong, M. K., Djurišić, A. B., Ng, A., Ren, Z., Shen, Q., Surya, C., Chan, W. K., Wang, J., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502206 · Cited by 425
Self-citationA Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
Kuang, C., Tang, G., Jiu, T., Yang, H., Liu, H., Li, B., Luo, W., Li, X., Zhang, W., Lu, F., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00787 · Cited by 376
Perovskite‐Based Phototransistors and Hybrid Photodetectors
Xie, C., Liu, C., Loi, H., & Yan, F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201903907 · Cited by 376
Recent progress in the development of high-efficiency inverted perovskite solar cells
Liu, S., Biju, V. P., Qi, Y., Chen, W., & Liu, Z. (2023) · NPG Asia Materials · doi:10.1038/s41427-023-00474-z · Cited by 342
Paek, S., Schouwink, P., Athanasopoulou, E. N., Cho, K. T., Grancini, G., Lee, Y., Zhang, Y., Stellacci, F., Nazeeruddin, M. K., & Gao, P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05353 · Cited by 299
Encapsulation of Organic and Perovskite Solar Cells: A Review
Uddin, A., Upama, M. B., Yi, H., & Duan, L. (2019) · Coatings · doi:10.3390/coatings9020065 · Cited by 290
Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells
Raga, S. R., Jung, M.-C., Lee, M. V., Leyden, M. R., Kato, Y., & Qi, Y. (2015) · Chemistry of Materials · doi:10.1021/cm5041997 · Cited by 280
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Self-citationRecycling Perovskite Solar Cells To Avoid Lead Waste
Binek, A., Petrus, M. L., Huber, N., Bristow, H., Hu, Y., Bein, T., & Docampo, P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03767 · Cited by 268
Phase Transition Control for High-Performance Blade-Coated Perovskite Solar Cells
Li, J., Munir, R., Fan, Y., Niu, T., Liu, Y., Zhong, Y., Yang, Z., Tian, Y., Liu, B., Sun, J., et al. (2018) · Joule · doi:10.1016/j.joule.2018.04.011 · Cited by 260
Degradation of inverted architecture CH3NH3PbI3‐xC lx perovskite solar cells due to trapped moisture
Bracher, C., Freestone, B. G., Mohamad, D. K., Smith, J. A., & Lidzey, D. G. (2018) · Energy Science & Engineering · doi:10.1002/ese3.180 · Cited by 27
Metadata
- Authors
- Xie, F. X., Zhang, D., Su, H., Ren, X., Wong, K. S., Grätzel, M., & Choy, W. C. H.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-01-02
- Volume
- 9
- Issue
- 1
- Pages
- 639-646
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W1966473922
- Cited by
- 351
- References
- 32
- FWCI
- 27.59
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.