Influence of Water Vapor and Flow Rate on the High-Temperature Oxidation of 304L; Effect of Chromium Oxide Hydroxide Evaporation
The DOI matches its Crossref record; 9 of the 11 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In the presence of water vapor chromium is volatilized by formation of CrO 2 (OH) 2 on the oxide surface [19,20,22]:”
From Alkali Induced High Temperature Corrosion of Stainless Steel: The Influence of NaCl, KCl and CaCl2 (2012) · cites this paper as [20]
Citations
Cites
Interfaces in Crystalline Materials
Sutton, A. P., & Balluffi, R. W. (1995) · Cited by 1,688
Diffusion of cations in chromia layers grown on iron-base alloys
Lobnig, R. E., Schmidt, H. P., Hennesen, K., & Grabke, H. J. (1992) · Oxidation of Metals · doi:10.1007/bf00665632 · Cited by 388
Asteman, H., Svensson, J.-E., Johansson, L.-G., & Norell, M. (1999) · Oxidation of Metals · doi:10.1023/a:1018875024306 · Cited by 304
Self-citationOxidation/Vaporization Kinetics of Cr 2 O 3
GRAHAM, H. C., & DAVIS, H. H. (1971) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1971.tb12225.x · Cited by 280
Rahmel, A., & Tobolski, J. (1965) · Corrosion Science · doi:10.1016/s0010-938x(65)90500-7 · Cited by 248
High-temperature oxidation of Fe-Cr alloys in wet oxygen
Jianian, S., Longjiang, Z., & Tiefan, L. (1997) · Oxidation of Metals · doi:10.1007/bf01670507 · Cited by 197
High temperature oxidation of Fe13CrxAl alloys in vapour mixtures
Kvernes, I. A., Oliveira, M. I. L. L., & Kofstad, P. (1977) · Corrosion Science · doi:10.1016/0010-938x(77)90049-x · Cited by 167
Electrical Properties of Anhydrous Iron Oxides
Gleitzer, C. (1996) · Key engineering materials · doi:10.4028/www.scientific.net/kem.125-126.355 · Cited by 29
Espelid, Ø., Børve, K. J., & Jensen, V. R. (1998) · The Journal of Physical Chemistry A · doi:10.1021/jp9830427 · Cited by 25
Research works printed but not linked: 4
- I. G. Wright, Metals Handbook, Vol. 13: Corrosion, 9th edn. (ASM, Materials Park, Ohio 1987), p. 97
- P. Kofstad, High-Temperature Corrosion, Chap. 11 (Elsevier, London, 1988), pp. 382-385.
- A. S. Khanna and P. Kofstad, International Conference on Microscopy of Oxidation (Inst. of Materials, London, 1990), p. 113.
- M. Thiele, H. Teichmann, W. Schwarz, and W. J. Quadakkers, VGB Kraftwerk. 2, 77 (1997).
Cited by
Items 101–200 of 332
Oxidation of Superalloys in Extreme Environments
Pint, B. A., Dryepondt, S. N., & Unocic, K. A. (2010) · Wiley eBooks · doi:10.1002/9781118495223.ch66 · Cited by 30
Hooshyar, H., Jonsson, T., Hall, J., Svensson, J.-E., Johansson, L., & Liske, J. (2015) · Oxidation of Metals · doi:10.1007/s11085-015-9597-5 · Cited by 33
Self-citationThe oxidation behaviour of an austenitic steel in deaerated supercritical water at 600–700 °C
Zhang, N., Zhu, Z., Yue, G., Jiang, D., & Xu, H. (2017) · Materials Characterization · doi:10.1016/j.matchar.2017.07.023 · Cited by 29
Corrosion behavior of metals or alloys with a solid NaCl deposit in wet oxygen at medium temperature
Liu, L., Li, Y., & Wang, F. (2011) · Science China Technological Sciences · doi:10.1007/s11431-011-4675-7 · Cited by 29
Dudziak, T. P., Lukaszewicz, M., Simms, N. J., & Nicholls, J. R. (2014) · Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control · doi:10.1179/1743278214y.0000000222 · Cited by 27
Huczkowski, P., Young, D. J., Olszewski, T., Chyrkin, A., & Quadakkers, W. J. (2017) · Oxidation of Metals · doi:10.1007/s11085-017-9809-2 · Cited by 27
Wenga, T., Chen, G., Ma, W., & Yan, B. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.04.013 · Cited by 26
Oxidation and Cr-evaporation behavior of MnCo based spinel and composite coated AISI 430 steel
Bidabadi, M. H. S., Siripongsakul, T., Thublaor, T., Wiman, P., & Chandra-ambhorn, S. (2022) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2022.128176 · Cited by 26
Oxidation Behavior of ODS Fe?Cr Alloys
Pint, B. A., & Wright, I. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-004-3200-9 · Cited by 26
Segerdahl, K., Svensson, J., Halvarsson, M., Panas, I., & Johansson, L. (2005) · Materials at High Temperatures · doi:10.1179/mht.2005.008 · Cited by 26
Self-citationMahboubi, S., Jiao, Y., Cook, W., Zheng, W., Guzonas, D. A., Botton, G. A., & Kish, J. R. (2016) · CORROSION · doi:10.5006/1982 · Cited by 31
Oxidation of Stainless Steel in H2O/O2 Environments – Role of Chromium Evaporation
Asteman, H., Segerdahl, K., Svensson, J. E., Johansson, L. G., Halvarsson, M., & Tang, J. E. (2004) · Materials science forum · doi:10.4028/www.scientific.net/msf.461-464.775 · Cited by 26
Self-citationGarcía, P. L., Vadillo, J. M., & Laserna, J. J. (2004) · Applied Spectroscopy · doi:10.1366/0003702042475538 · Cited by 28
Mechanistic-Based Lifetime Predictions for High-Temperature Alloys and Coatings
Pint, B. A., Dryepondt, S. N., Put, A. V., & Zhang, Y. (2012) · JOM · doi:10.1007/s11837-012-0474-2 · Cited by 25
Li, M., Zhang, H., Huang, R., Wang, S., & Bi, H. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.11.018 · Cited by 25
Oxidation behaviour of Super 304H stainless steel in supercritical water
Li, H., Cao, Q., & Zhu, Z. (2018) · Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control · doi:10.1080/1478422x.2018.1459064 · Cited by 26
Chapter 10 Effects of Water Vapour on Oxidation
Young, J. (2008) · Elsevier's corrosion science series · doi:10.1016/s1875-9491(08)00010-0 · Cited by 26
Calmunger, M., Eriksson, R., Chai, G., Johansson, S., & Moverare, J. J. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.08.030 · Cited by 26
Corrosion of Alloy 617 in high-temperature gas environments
Yeh, T., Chang, H.-P., Wang, M., Yuan, T., & Kai, J. (2013) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2013.11.045 · Cited by 25
Huang, W., Huang, T., Song, P. Y., Chen, R., Zheng, B., Wang, C., Li, C., & Lu, J. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109303 · Cited by 25
The Effect of Water Vapor on Oxidation Performance of Alloys Used in Recuperators
Pint, B. A., More, K. L., & Tortorelli, P. F. (2002) · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · doi:10.1115/gt2002-30543 · Cited by 24
Surface oxidation of basalt glass/liquid
Burkhard, D. J. M., & Scherer, T. (2005) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2005.11.029 · Cited by 24
Eklund, J., Persdotter, A., Hanif, I., Bigdeli, S., & Jonsson, T. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109584 · Cited by 23
Kiamehr, S., Dahl, K. V., Montgomery, M., & Somers, M. A. J. (2015) · Materials and Corrosion · doi:10.1002/maco.201408215 · Cited by 24
High Temperature Corrosion of Cast Alloys in Exhaust Environments. II—Cast Stainless Steels
Tholence, F., & Norell, M. (2007) · Oxidation of Metals · doi:10.1007/s11085-007-9082-x · Cited by 23
Self-citationOxidation of Sanicro 25 (42Fe22Cr25NiWCuNbN) in O2 and O2 + H2O Environments at 600–750 °C
Intiso, L., Johansson, L., Svensson, J.-E., & Halvarsson, M. (2015) · Oxidation of Metals · doi:10.1007/s11085-015-9528-5 · Cited by 24
Self-citationYang, J., Wang, S., Wang, J., & Tang, X. (2020) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2020.105126 · Cited by 22
Pettersson, J., Pettersson, C., Asteman, H., Svensson, J. E., & Johansson, L. G. (2004) · Materials science forum · doi:10.4028/www.scientific.net/msf.461-464.965 · Cited by 22
Self-citationZurek, J., Meier, G. H., Wessel, E., Singheiser, L., & Quadakkers, W. J. (2011) · Materials and Corrosion · doi:10.1002/maco.201005865 · Cited by 22
Li, Z., Wang, J., Li, F., Li, Z., Zhou, E., Fan, Y., Song, H., Xu, Z., Gu, T., Wang, F., et al. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202425220 · Cited by 21
Zhou, C., Xu, H., & Gong, S. (2004) · Oxidation of Metals · doi:10.1007/s11085-004-7807-7 · Cited by 21
Role of Nitrogen Uptake During the Oxidation of 304L and 904L Austenitic Stainless Steels
Cao, Y. J., & Norell, M. (2013) · Oxidation of Metals · doi:10.1007/s11085-013-9391-1 · Cited by 21
Self-citationInvestigation of overheating of the final super-heater in a 660MW power plant
Liang, Z., Jin, X., & Zhao, Q. (2014) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2014.06.022 · Cited by 22
Das, N. K., & Shoji, T. (2013) · Oxidation of Metals · doi:10.1007/s11085-013-9366-2 · Cited by 21
Huang, J., Yi, D., Yan, J., Han, B., He, Y., Yang, Z. C., Zhou, Y., & Yang, F. (2024) · Corrosion Communications · doi:10.1016/j.corcom.2023.09.003 · Cited by 20
Effects of surface deformation on the oxidation behavior of INCONEL 740 superalloy in humid air
Abbasi, M., Kim, B., Kim, D., & Jung, W.-S. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.05.057 · Cited by 20
Delgado, T., Ruiz, J., Cabalín, L. M., & Laserna, J. J. (2016) · Journal of Analytical Atomic Spectrometry · doi:10.1039/c6ja00219f · Cited by 20
The Effect of Shot Peening on Steam Oxidation of 304H Stainless Steel
Kurley, J. M., & Pint, B. A. (2019) · Oxidation of Metals · doi:10.1007/s11085-019-09951-9 · Cited by 21
Pillai, R., Romedenne, M., Haynes, J. A., & Pint, B. A. (2021) · Oxidation of Metals · doi:10.1007/s11085-020-10017-4 · Cited by 21
Critical Corrosion Phenomena on Superheaters in Biomass and Waste-Fired Boilers
Johansson, L., Svensson, J., Skog, E., Liske, J., Pettersson, C., Folkeson, N., Asteman, H., Jonsson, T., & Halvarsson, M. (2007) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(08)60048-5 · Cited by 21
Self-citationNano-crystalline coating to improve cyclic oxidation resistance of 304 stainless steel
Zhang, J., Xiao, P., Young, D. J., & Wang, F. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.12.007 · Cited by 20
KCl-Induced High Temperature Corrosion of the Austenitic Stainless Steel 304L – The Influence of SO2
Karlsson, S., Pettersson, J., Svensson, J. E., & Johansson, L. G. (2011) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.696.224 · Cited by 20
Self-citationSteam Oxidation of Austenitic Heat-Resistant Steels TP347H and TP347HFG at 650–800 °C
Liang, Z., & Zhao, Q. (2019) · Materials · doi:10.3390/ma12040577 · Cited by 20
Asteman, H., Norling, R., Svensson, J. E., Nylund, A., & Nyborg, L. (2002) · Surface and Interface Analysis · doi:10.1002/sia.1290 · Cited by 24
Self-citationTG–mass spectrometry studies in coating design for supercritical steam turbines
Pérez, F. J., & Castañeda, S. I. (2008) · Materials and Corrosion · doi:10.1002/maco.200804123 · Cited by 19
Proff, C., Jonsson, T., Pettersson, C., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2009) · Materials at High Temperatures · doi:10.1179/096034009x464339 · Cited by 19
Self-citationLiang, Z., Singh, P. M., Zhao, Q., & Wang, Y. (2015) · Oxidation of Metals · doi:10.1007/s11085-015-9555-2 · Cited by 20
Corrosion behavior of chromium oxide based ceramics in supercritical water (SCW) environments
Dong, Z., Chen, W., Zheng, W., & Guzonas, D. A. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.08.048 · Cited by 20
Lehmusto, J., Lindberg, D., Yrjas, P., Skrifvars, B.-J., & Hupa, M. M. (2011) · Oxidation of Metals · doi:10.1007/s11085-011-9277-z · Cited by 19
Effects of Water Vapour on Oxidation
Young, D. J. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100101-1.00011-x · Cited by 20
The high temperature oxidation of 11% chromium steel: Part II - Influence of flow rate
Segerdahl, K., Svensson, J., & Johansson, L. (2002) · Materials and Corrosion · doi:10.1002/1521-4176(200207)53:7<479::aid-maco479>3.0.co;2-h · Cited by 20
Self-citationChen, J., Jang, C., Xiao, Q., Lee, H. B., Kim, C., Kim, S. H., Shin, J. H., & Subramanian, G. O. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.150314 · Cited by 19
TDS Measurement of Hydrogen Released from Stainless Steel Oxidized in H2O-Containing Atmospheres
Yamauchi, A., Yamauchi, Y., HIROHATA, Y., Hino, T., & Kurokawa, K. (2006) · Materials science forum · doi:10.4028/www.scientific.net/msf.522-523.163 · Cited by 18
Field studies of steam oxidation behavior of austenitic heat-resistant steel 10Cr18Ni9Cu3NbN
Liang, Z., Zhao, Q., Singh, P. M., Wang, Y., Li, Y., & Wang, Y. (2015) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2015.02.019 · Cited by 19
Jonsson, T., Liu, F., Canovic, S., Asteman, H., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2768909 · Cited by 16
Self-citationRutkowski, B., Gil, A., Agüero, A., González, V., & Czyrska-Filemonowicz, A. (2018) · Oxidation of Metals · doi:10.1007/s11085-017-9824-3 · Cited by 17
Evaluation of Alumina-Forming Austenitic Foil for Advanced Recuperators
Pint, B. A., Brady, M. P., Yamamoto, Y., Santella, M. L., Maziasz, P. J., & Matthews, W. J. (2011) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4002827 · Cited by 22
Li, K., Zeng, Y., & Luo, J. (2020) · Energy · doi:10.1016/j.energy.2020.119178 · Cited by 18
Oger, L., Vergnes, H., Caussat, B., Monceau, D., & Put, A. V. (2022) · Corrosion Science · doi:10.1016/j.corsci.2022.110306 · Cited by 19
Effect of water vapour on cyclic oxidation of Fe–Cr alloys
Othman, N. K., Zhang, J., & Young, D. J. (2011) · Materials and Corrosion · doi:10.1002/maco.201005866 · Cited by 19
The oxidation performance of modern high-temperature alloys
Deodeshmukh, V. P., & Srivastava, S. K. (2009) · JOM · doi:10.1007/s11837-009-0104-9 · Cited by 17
High Temperature Oxidation of the Austenitic (35Fe27Cr31Ni) Alloy Sanicro 28 in O2 + H2O Environment
Pettersson, C., Jonsson, T., Proff, C., Halvarsson, M., Svensson, J., & Johansson, L.-G. (2010) · Oxidation of Metals · doi:10.1007/s11085-010-9199-1 · Cited by 17
Self-citationThe Effect of Water Vapour on the Corrosion of Sandvik Sanergy HT Under Dual Atmosphere Conditions
Skilbred, A. W. B., & Haugsrud, R. (2012) · Oxidation of Metals · doi:10.1007/s11085-012-9313-7 · Cited by 17
Wang, B., Wang, S., Liu, B., Zhu, Q. Y., & Li, X. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.124952 · Cited by 16
Yang, J., Sun, J., Bai, S., Wu, H., Wang, S., Li, Y., Ma, W., & Xu, D. (2022) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2022.105783 · Cited by 16
Oxidation of chromium carbide coated Q235 steel in wet and dry air at 750 °C
Wu, S., Guo, B., Li, T., & Gui, D. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.072 · Cited by 17
Zhang, N., Zhu, Z., Cao, Q., Gui, J., & Xu, H. J. (2017) · Materials and Corrosion · doi:10.1002/maco.201709705 · Cited by 16
Betova, I. G., Bojinov, M. S., Kinnunen, P., Lehtovuori, V., Peltonen, S., Penttilä, S., & Saario, T. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2337166 · Cited by 16
Hayashi, S., & Narita, T. (2002) · Oxidation of Metals · doi:10.1023/a:1020106804999 · Cited by 15
High-temperature Oxidation of Fe-Cr Steels in Steam Condition – A Review
Kurniawan, T., Fauzi, F. A., & Asmara, Y. P. (2016) · Indonesian Journal of Science and Technology · doi:10.17509/ijost.v1i1.2217 · Cited by 15
Effect of water vapour partial pressure on the chromia (Cr2O3)-based scale stability
Mahboubi, S., Zurob, H. S., Botton, G. A., & Kish, J. R. (2017) · Canadian Metallurgical Quarterly · doi:10.1080/00084433.2017.1373968 · Cited by 15
Behaviour of alumina-coated 304L steel in a Waste-to-Energy plant
Goutier, F., Valette, S., Vardelle, A. M., & Lefort, P. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.03.054 · Cited by 14
CHAPTER 5 Effect of Water Vapour on the High Temperature Oxidation of Stainless Steels
Chandra-ambhorn, S., Wongpromrat, P., Thublaor, T., & Chandra-ambhorn, W. (2020) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.300.107 · Cited by 16
Hydrogen Dissolution into 10% Chromium Ferritic Steels during High-Temperature Steam Oxidation
Nakai, M., Nagai, K., Murata, Y., Morinaga, M., Matsuda, S., & Kanno, M. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.69 · Cited by 14
High-temperature corrosion during the thermal treatment of footwear leather wastes
Godinho, M., Birriel, E. J., Marcílio, N. R., Masotti, L., Martins, C. B., & Wenzel, B. M. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.12.025 · Cited by 20
Airaksinen, S., Haapakangas, J., Laukka, A., Heikkinen, E., & Fabritius, T. M. J. (2023) · steel research international · doi:10.1002/srin.202300334 · Cited by 15
Multi-principal element alloys for concentrating solar power based on molten salt
Carbajales, R., Sobrino, C., & Alvaredo, P. (2024) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2024.112861 · Cited by 13
High-Temperature Performance of Cast CF8C-Plus Austenitic Stainless Steel
Maziasz, P. J., & Pint, B. A. (2011) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4002828 · Cited by 15
Failure Analysis of Butt Weld of Bimetal Composite Pipes
Chen, H., Ma, H., Chen, X., Jiang, S., & Wang, H. (2015) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-015-9978-8 · Cited by 13
Effect of Annealing Atmosphere on Scale Formation and Pickling Performance of 410 SS
Cheng, S.-Y., Juan, C.-T., Kuan, S. L., & Tsai, W. (2003) · Oxidation of Metals · doi:10.1023/a:1027316918546 · Cited by 13
Characterization of pack cemented Ni2Al3 coating exposed to KCl(s) induced corrosion at 600 °C
Dahl, K. V., Slomian, A., Lomholt, T. N., Kiamehr, S., Grumsen, F. B., Montgomery, M., & Jonsson, T. (2017) · Materials at High Temperatures · doi:10.1080/09603409.2017.1392112 · Cited by 13
Wang, Y., Liu, Y., Li, G., Zheng, M., Li, Y., Zhang, A., & Zhang, Y. (2021) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2021.127527 · Cited by 12
A pilot-scale test of plasma torch application for decarbonising the steel reheating furnaces
Zaini, I. N., Svanberg, R., Sundberg, D., Bölke, K., Granqvist, J., Lille, C., Tarantino, N., & Yang, W. (2023) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2023.101766 · Cited by 12
Tomas, M., Svensson, J., & Froitzheim, J. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.04.010 · Cited by 12
Self-citationMortazavi, N., Intiso, L., Israelsson, N., Johansson, L., & Halvarsson, M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0581514jes · Cited by 12
Self-citationCastañeda, S. I., & Pérez, F. J. (2012) · Oxidation of Metals · doi:10.1007/s11085-012-9309-3 · Cited by 13
Oxidation behavior of austenitic steel Sanicro25 and TP347HFG in supercritical water
Zhu, Z., Jiang, D., Cao, Q., Xu, H., Khan, H. I., & Zhang, N. (2019) · Materials and Corrosion · doi:10.1002/maco.201810247 · Cited by 12
The Oxidation of Metal Alloy Foils in the Presence of Water Vapor
Rakowski, J. M. (2004) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.1787508 · Cited by 12
Factors Affecting Corrosion Resistance of Recuperator Alloys
Pint, B. A., & Peraldi, R. (2003) · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · doi:10.1115/gt2003-38692 · Cited by 18
Qiao, Y., Wang, J., Zhang, Z., Quan, X., Liu, J., Fang, X., & Han, P. (2017) · Oxidation of Metals · doi:10.1007/s11085-017-9738-0 · Cited by 11
Ruiz-Yi, B., Williams, T., Bunn, J. K., Ren, F., Hasan, N. A., Takeuchi, I., Hattrick-Simpers, J. R., & Mehta, A. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.158565 · Cited by 11
Internal Oxidation of a Fe–Cr Binary Alloy at 700–900 °C: The Role of Hydrogen and Water Vapor
Chyrkin, A., Cossu, C., Svensson, J., & Froitzheim, J. (2022) · Oxidation of Metals · doi:10.1007/s11085-022-10121-7 · Cited by 11
Self-citationEffect of Environment on the High Temperature Oxidation Behavior of 718 and 718Plus
Unocic, K. A., & Pint, B. A. (2014) · International Symposium on Superalloy 718 and Derivatives · doi:10.7449/2014/superalloys_2014_667_677 · Cited by 11
Lukaszewicz, M., Simms, N. J., Dudziak, T. P., & Nicholls, J. R. (2012) · Materials at High Temperatures · doi:10.1179/096034012x13345097246696 · Cited by 11
Application of the pack cementation process on SiC/SiC ceramic matrix composites
König, T., Galetz, M. C., & Albert, B. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.09.027 · Cited by 11
Stephan‐Scherb, C., Lehmusto, J., Falk, F., Sobol, O., & Pint, B. A. (2022) · Corrosion Science · doi:10.1016/j.corsci.2022.110236 · Cited by 11
Simplified Paralinear Oxidation Analyses
Smialek, J. L. (2023) · High Temperature Corrosion of Materials · doi:10.1007/s11085-023-10156-4 · Cited by 13
Corrosion of stainless steels in simulated diesel exhaust environment with urea
Nockert, J., Nyborg, L., & Norell, M. (2011) · Materials and Corrosion · doi:10.1002/maco.201005783 · Cited by 11
Self-citationEffects of Si, Mn, Ti and Ce on oxidation of Fe-Cr alloys in water vapour
Wang, J., Mao, S., Zhang, J., & Young, D. J. (2025) · npj Materials Degradation · doi:10.1038/s41529-025-00641-3 · Cited by 11
Viklund, P., Kassman, H., & Åmand, L.-E. (2014) · Materials and Corrosion · doi:10.1002/maco.201307162 · Cited by 11
Metadata
- Authors
- Asteman, H., Svensson, J.-E., Norell, M., & Johansson, L.-G.
- Affiliations
- University of Gothenburg (SE)
- Chalmers University of Technology (SE)
- Venue
- Oxidation of Metals
- Published
- 2000-08
- Volume
- 54
- Issue
- 1-2
- Pages
- 11-26
- ISSN
- 0030-770X (ISSN-L)
- 1573-4889
- OpenAlex
- W92588835
- Cited by
- 325
- References
- 11
- Citations by year
- 2026: 7 · 2025: 10 · 2024: 13 · 2023: 9 · 2022: 7 · 2021: 14 · 2020: 11 · 2019: 12 · 2018: 14 · 2017: 17 · 2016: 16 · 2015: 26 · 2014: 10 · 2013: 14 · 2012: 16
- FWCI
- 19.36
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Oxidation of Metals (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Materials Science › Metals and Alloys › Hydrogen embrittlement and corrosion behaviors in metals
- Physical Sciences › Materials Science › Materials Chemistry › Corrosion Behavior and Inhibition
- Keywords
- 304L stainless steel, high-temperature oxidation, water vapor, flow rate, breakaway corrosion, Fe2O3, oxide islands, oxygen corrosion, mass gain
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.