The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Identification of cathode materials for lithium batteries guided by first-principles calculations
Open accessAbstract
Lithium batteries have the highest energy density of all rechargeable batteries and are favoured in applications where low weight or small volume are desired — for example, laptop computers, cellular telephones and electric vehicles. One of the limitations of present commercial lithium batteries is the high cost of the LiCoO2 cathode material. Searches for a replacement material that, like LiCoO2, intercalates lithium ions reversibly have covered most of the known lithium/transition-metal oxides, but the number of possible mixtures of these is almost limitless, making an empirical search labourious and expensive. Here we show that first-principles calculations can instead direct the search for possible cathode materials. Through such calculations we identify a large class of new candidate materials in which non-transition metals are substituted for transition metals. The replacement with non-transition metals is driven by the realization that oxygen, rather than transition-metal ions, function as the electron acceptor upon insertion of Li. For one such material, Li(Co,Al)O2, we predict and verify experimentally that aluminium substitution raises the cell voltage while decreasing both the density of the material and its cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Ab initio study of lithium intercalation in metal oxides and metal dichalcogenides
Aydinol, M. K., Kohan, A. F., Ceder, G., Cho, K., & Joannopoulos, J. (1997) · Physical Review B · doi:10.1103/physrevb.56.1354 · Cited by 1,388
Self-citationComparative study of LiCoO2, LiNi Co O2 and LiNiO2 for 4 volt secondary lithium cells
Ohzuku, T., Ueda, A., Nagayama, M., Iwakoshi, Y., & Komori, H. (1993) · Electrochimica Acta · doi:10.1016/0013-4686(93)80046-3 · Cited by 799
Ohzuku, T., Ueda, A., & Kouguchi, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048458 · Cited by 445
Electrochemical and physical properties of the LixNi1$minus;yCoyO2 phases
DELMAS, C. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90402-b · Cited by 348
TARASCON, J., & GUYOMARD, D. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90418-9 · Cited by 291
Application of first-principles calculations to the design of rechargeable Li-batteries
Ceder, G., Aydinol, M. K., & Kohan, A. F. (1997) · Computational Materials Science · doi:10.1016/s0927-0256(97)00029-3 · Cited by 233
Self-citation
Cited by
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Towards the computational design of solid catalysts
Nørskov, J. K., Bligaard, T., Rossmeisl, J., & Christensen, C. H. (2009) · Nature Chemistry · doi:10.1038/nchem.121 · Cited by 4,161
Computational high-throughput screening of electrocatalytic materials for hydrogen evolution
Greeley, J., Jaramillo, T. F., Bonde, J., Chorkendorff, I., & Nørskov, J. K. (2006) · Nature Materials · doi:10.1038/nmat1752 · Cited by 4,097
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
The high-throughput highway to computational materials design
Curtarolo, S., Hart, G. L. W., Nardelli, M. B., Mingo, N., Sanvito, S., & Levy, O. (2013) · Nature Materials · doi:10.1038/nmat3568 · Cited by 2,053
Research on Advanced Materials for Li‐ion Batteries
Li, H., Wang, Z., Chen, L., & Huang, X. (2009) · Advanced Materials · doi:10.1002/adma.200901710 · Cited by 1,803
High-throughput electronic band structure calculations: Challenges and tools
Setyawan, W., & Curtarolo, S. (2010) · Computational Materials Science · doi:10.1016/j.commatsci.2010.05.010 · Cited by 1,692
Pseudopotentials for high-throughput DFT calculations
Garrity, K. F., Bennett, J. W., Rabe, K. M., & Vanderbilt, D. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2013.08.053 · Cited by 1,644
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries
Assat, G., & Tarascon, J.-M. (2018) · Nature Energy · doi:10.1038/s41560-018-0097-0 · Cited by 1,588
Seo, D.-H., Lee, J., Urban, A., Malik, R., Kang, S., & Ceder, G. (2016) · Nature Chemistry · doi:10.1038/nchem.2524 · Cited by 1,561
Self-citationReversible anionic redox chemistry in high-capacity layered-oxide electrodes
Sathiya, M., Rousse, G., Ramesha, K., Laisa, C. P., Vezin, H., Sougrati, M. T., Doublet, M.-L., Foix, D., Gonbeau, D., Walker, W., et al. (2013) · Nature Materials · doi:10.1038/nmat3699 · Cited by 1,539
AFLOW: An automatic framework for high-throughput materials discovery
Curtarolo, S., Setyawan, W., Hart, G. L. W., Jahnatek, M., Chepulskii, R. V., Taylor, R. H., Wang, S., Xue, J., Yang, K., Levy, O., et al. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2012.02.005 · Cited by 1,531
Scaling deep learning for materials discovery
Merchant, A., Batzner, S., Schoenholz, S. S., Aykol, M., Cheon, G., & Cubuk, E. D. (2023) · Nature · doi:10.1038/s41586-023-06735-9 · Cited by 1,527
Ong, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ma, X., & Ceder, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01782a · Cited by 1,415
Self-citationMyung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Automotive Li-Ion Batteries: Current Status and Future Perspectives
Ding, Y., Cano, Z. P., Yu, A., Lu, J., & Chen, Z. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0022-z · Cited by 1,370
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Islam, M. S., & Fisher, C. A. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60199d · Cited by 1,079
Computational predictions of energy materials using density functional theory
Jain, A., Shin, Y., & Persson, K. A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.4 · Cited by 919
Formation of the Spinel Phase in the Layered Composite Cathode Used in Li-Ion Batteries
Gu, M., Belharouak, I., Zheng, J., Wu, H., Xiao, J., Genc, A., Amine, K., Thevuthasan, S., Baer, D. R., Zhang, J.-G., et al. (2013) · ACS Nano · doi:10.1021/nn305065u · Cited by 918
Thermodynamic analysis on energy densities of batteries
Zu, C.-X., & Li, H. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00777c · Cited by 911
An Overview on the Advances of LiCoO2 Cathodes for Lithium‐Ion Batteries
Lyu, Y., Wu, X., Wang, K., Feng, Z., Cheng, T., Liu, Y., Wang, M., Chen, R., Xu, L., Zhou, J., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000982 · Cited by 890
Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries
McCalla, E., Abakumov, A. M., Saubanère, M., Foix, D., Berg, E. J., Rousse, G., Doublet, M.-L., Gonbeau, D., Novák, P., Van Tendeloo, G., et al. (2015) · Science · doi:10.1126/science.aac8260 · Cited by 854
Recent progress in cathode materials research for advanced lithium ion batteries
Xu, B., Qian, D., Wang, Z., & Meng, Y. S. (2012) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2012.05.003 · Cited by 834
Liu, Q., Su, X., Lei, D., Qin, Y., Wen, J., Guo, F., Wu, Y. A., Rong, Y., Kou, R., Xiao, X., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0180-6 · Cited by 815
Feng, Q.-K., Zhong, S.-L., Pei, J.-Y., Zhao, Y., Zhang, D.-L., Liu, D.-F., Zhang, Y.-X., & Dang, Z.-M. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00793 · Cited by 744
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Kesterite Thin‐Film Solar Cells: Advances in Materials Modelling of Cu2ZnSnS4
Walsh, A., Chen, S., Wei, S., & Gong, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100630 · Cited by 695
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
There and Back Again—The Journey of LiNiO2 as a Cathode Active Material
Bianchini, M., Roca‐Ayats, M., Hartmann, P., Brezesinski, T., & Janek, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812472 · Cited by 670
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
A critical review of cathodes for rechargeable Mg batteries
Mao, M., Gao, T., Hou, S., & Wang, C. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00319j · Cited by 591
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Meng, Y. S., & Arroyo-de Dompablo, M. E. (2009) · Energy & Environmental Science · doi:10.1039/b901825e · Cited by 545
Factors that affect Li mobility in layered lithium transition metal oxides
Kang, K., & Ceder, G. (2006) · Physical Review B · doi:10.1103/physrevb.74.094105 · Cited by 537
Self-citationInjection of oxygen vacancies in the bulk lattice of layered cathodes
Yan, P., Zheng, J., Tang, Z.-K., Devaraj, A., Chen, G., Amine, K., Zhang, J.-G., Liu, L.-M., & Wang, C. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0428-8 · Cited by 520
A review of Ni-based layered oxides for rechargeable Li-ion batteries
Xu, J., Lin, F., Doeff, M. M., & Tong, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07991a · Cited by 517
Functional materials discovery using energy–structure–function maps
Pulido, A., Chen, L., Kaczorowski, T., Holden, D., Little, M. A., Chong, S. Y., Slater, B. J., McMahon, D. P., Bonillo, B., Stackhouse, C. J., et al. (2017) · Nature · doi:10.1038/nature21419 · Cited by 506
Data-Driven Strategies for Accelerated Materials Design
Pollice, R., dos Passos Gomes, G., Aldeghi, M., Hickman, R. J., Krenn, M., Lavigne, C., Lindner-D’Addario, M., Nigam, A., Ser, C. T., Yao, Z., et al. (2021) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00785 · Cited by 473
Machine learning assisted materials design and discovery for rechargeable batteries
Liu, Y., Guo, B., Zou, X., Li, Y., & Shi, S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.06.033 · Cited by 466
Predicting the Band Gaps of Inorganic Solids by Machine Learning
Zhuo, Y., Mansouri Tehrani, A., & Brgoch, J. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b00124 · Cited by 455
Hautier, G., Jain, A., Ong, S. P., Kang, B., Moore, C., Doe, R., & Ceder, G. (2011) · Chemistry of Materials · doi:10.1021/cm200949v · Cited by 440
Self-citationThe Li intercalation potential of LiMPO4 and LiMSiO4 olivines with M=Fe, Mn, Co, Ni
Zhou, F., Cococcioni, M., Kang, K., & Ceder, G. (2004) · Electrochemistry Communications · doi:10.1016/j.elecom.2004.09.007 · Cited by 433
Self-citationComputational screening of perovskite metal oxides for optimal solar light capture
Castelli, I. E., Olsen, T., Datta, S., Landis, D. D., Dahl, S., Thygesen, K. S., & Jacobsen, K. W. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02717d · Cited by 432
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
Predicting Crystal Structures with Data Mining of Quantum Calculations
Curtarolo, S., Morgan, D., Persson, K., Rodgers, J., & Ceder, G. (2003) · Physical Review Letters · doi:10.1103/physrevlett.91.135503 · Cited by 424
Self-citationQian, J., Liu, L., Yang, J., Li, S., Wang, X., Zhuang, H. L., & Lu, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-07296-6 · Cited by 397
Betz, J., Bieker, G., Meister, P., Placke, T., Winter, M., & Schmuch, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803170 · Cited by 390
Assessing the reliability of calculated catalytic ammonia synthesis rates
Medford, A. J., Wellendorff, J., Vojvodic, A., Studt, F., Abild-Pedersen, F., Jacobsen, K. W., Bligaard, T., & Nørskov, J. K. (2014) · Science · doi:10.1126/science.1253486 · Cited by 377
A combined first principles and experimental study on Na3V2(PO4)2F3 for rechargeable Na batteries
Shakoor, R. A., Seo, D.-H., Kim, H., Park, Y.-U., Kim, J., Kim, S.-W., Gwon, H., Lee, S., & Kang, K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33862a · Cited by 365
Mathew, K., Montoya, J. H., Faghaninia, A., Dwarakanath, S., Aykol, M., Tang, H., Chu, I.-H., Smidt, T., Bocklund, B., Horton, M., et al. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.07.030 · Cited by 358
Yoon, W.-S., Kim, K.-B., Kim, M.-G., Lee, M.-K., Shin, H.-J., Lee, J.-M., Lee, J.-S., & Yo, C.-H. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013735e · Cited by 357
Anionic Redox in Rechargeable Lithium Batteries
Li, B., & Xia, D. (2017) · Advanced Materials · doi:10.1002/adma.201701054 · Cited by 338
Smidstrup, S., Stradi, D., Wellendorff, J., Khomyakov, P. A., Vej-Hansen, U. G., Lee, M.-E., Ghosh, T., Jónsson, E., Jónsson, H., & Stokbro, K. (2017) · Physical Review B · doi:10.1103/physrevb.96.195309 · Cited by 338
Nonequilibrium Thermodynamics of Porous Electrodes
Ferguson, T. R., & Bazant, M. Z. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.048212jes · Cited by 333
Sulfur–carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte
Wang, J. L., Yang, J., Xie, J. Y., Xu, N. X., & Li, Y. (2002) · Electrochemistry Communications · doi:10.1016/s1388-2481(02)00358-2 · Cited by 315
Bhatt, M. D., & O'Dwyer, C. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05552g · Cited by 300
Bandgap calculations and trends of organometal halide perovskites
Castelli, I. E., García-Lastra, J. M., Thygesen, K. S., & Jacobsen, K. W. (2014) · APL Materials · doi:10.1063/1.4893495 · Cited by 293
Hou, P., Yin, J., Ding, M., Huang, J., & Xu, X. (2017) · Small · doi:10.1002/smll.201701802 · Cited by 289
Xu, G., Amine, R., Abouimrane, A., Che, H., Dahbi, M., Ma, Z., Saadoune, I., Alami, J., Mattis, W. L., Pan, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702403 · Cited by 287
Computational Screening of Homovalent Lead Substitution in Organic–Inorganic Halide Perovskites
Filip, M. R., & Giustino, F. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11845 · Cited by 283
Combined Electronic Structure and Evolutionary Search Approach to Materials Design
Jóhannesson, G. H., Bligaard, T., Ruban, A. V., Skriver, H. L., Jacobsen, K. W., & Nørskov, J. K. (2002) · Physical Review Letters · doi:10.1103/physrevlett.88.255506 · Cited by 277
Designing exceptional gas-separation polymer membranes using machine learning
Barnett, J. W., Bilchak, C. R., Wang, Y., Benicewicz, B. C., Murdock, L. A., Bereau, T., & Kumar, S. K. (2020) · Science Advances · doi:10.1126/sciadv.aaz4301 · Cited by 277
Shi, S., Liu, L., Ouyang, C., Wang, D.-S., Wang, Z., Chen, L., & Huang, X. (2003) · Physical Review B · doi:10.1103/physrevb.68.195108 · Cited by 274
Graphene-based materials with tailored nanostructures for energy conversion and storage
Yang, Y., Han, C., Jiang, B., Iocozzia, J., He, C., Shi, D., Jiang, T., & Lin, Z. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.12.003 · Cited by 273
Wang, K., Wan, J., Xiang, Y., Zhu, J., Leng, Q., Wang, M., Xu, L., & Yang, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228062 · Cited by 268
Deng, T., Fan, X., Cao, L., Chen, J., Hou, S., Ji, X., Chen, L., Li, S., Zhou, X., Hu, E., et al. (2019) · Joule · doi:10.1016/j.joule.2019.08.004 · Cited by 266
Castelli, I. E., Landis, D. D., Thygesen, K. S., Dahl, S., Chorkendorff, I., Jaramillo, T. F., & Jacobsen, K. W. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22341d · Cited by 266
Cycle-Life Characterization of Automotive Lithium-Ion Batteries with LiNiO[sub 2] Cathode
Zhang, Y., & Wang, C.-Y. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3126385 · Cited by 264
Nanoporous graphene as a reverse osmosis membrane: Recent insights from theory and simulation
Cohen-Tanugi, D., & Grossman, J. C. (2015) · Desalination · doi:10.1016/j.desal.2014.12.046 · Cited by 263
Franco, A. A. (2013) · RSC Advances · doi:10.1039/c3ra23502e · Cited by 262
Structural stability of lithium manganese oxides
Mishra, S. K., & Ceder, G. (1999) · Physical Review B · doi:10.1103/physrevb.59.6120 · Cited by 260
Self-citationGreen, M. L., Takeuchi, I., & Hattrick-Simpers, J. R. (2013) · Journal of Applied Physics · doi:10.1063/1.4803530 · Cited by 259
Emery, A. A., Saal, J. E., Kirklin, S., Hegde, V. I., & Wolverton, C. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01182 · Cited by 257
Quick screening stable double perovskite oxides for photovoltaic applications by machine learning
Liu, H., Feng, J., & Dong, L. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.02.258 · Cited by 29
Metadata
- Authors
- Ceder, G., Chiang, Y.-M., Sadoway, D. R., Aydinol, M. K., Jang, Y.-I., & Huang, B.
- Venue
- Nature
- Published
- 1998-04
- Volume
- 392
- Issue
- 6677
- Pages
- 694-696
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W1854827278
- Cited by
- 841
- References
- 7
- FWCI
- 28.20
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.