The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
An integrated design and fabrication strategy for entirely soft, autonomous robots
Open accessAbstract
Soft robots possess many attributes that are difficult, if not impossible, to achieve with conventional robots composed of rigid materials. Yet, despite recent advances, soft robots must still be tethered to hard robotic control systems and power sources. New strategies for creating completely soft robots, including soft analogues of these crucial components, are needed to realize their full potential. Here we report the untethered operation of a robot composed solely of soft materials. The robot is controlled with microfluidic logic that autonomously regulates fluid flow and, hence, catalytic decomposition of an on-board monopropellant fuel supply. Gas generated from the fuel decomposition inflates fluidic networks downstream of the reaction sites, resulting in actuation. The body and microfluidic logic of the robot are fabricated using moulding and soft lithography, respectively, and the pneumatic actuator networks, on-board fuel reservoirs and catalytic reaction chambers needed for movement are patterned within the body via a multi-material, embedded 3D printing technique. The fluidic and elastomeric architectures required for function span several orders of magnitude from the microscale to the macroscale. Our integrated design and rapid fabrication approach enables the programmable assembly of multiple materials within this architecture, laying the foundation for completely soft, autonomous robots.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Shepherd, R. F., Ilievski, F., Choi, W., Morin, S. A., Stokes, A. A., Mazzeo, A. D., Chen, X., Wang, M., & Whitesides, G. M. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1116564108 · Cited by 2,111
Self-citation3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Self-citationEmbedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Self-citationPneumatic Networks for Soft Robotics that Actuate Rapidly
Mosadegh, B., Polygerinos, P., Keplinger, C., Wennstedt, S., Shepherd, R. F., Gupta, U., Shim, J., Bertoldi, K., Walsh, C. J., & Whitesides, G. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303288 · Cited by 1,607
Self-citationUniversal robotic gripper based on the jamming of granular material
Brown, E., Rodenberg, N., Amend, J., Mozeika, A., Steltz, E., Zakin, M. R., Lipson, H., & Jaeger, H. M. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1003250107 · Cited by 1,603
Barnes, H. A. (1997) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(97)00004-9 · Cited by 1,535
Softening of Rubber by Deformation
Mullins, L. (1969) · Rubber Chemistry and Technology · doi:10.5254/1.3539210 · Cited by 1,232
A Resilient, Untethered Soft Robot
Tolley, M. T., Shepherd, R. F., Mosadegh, B., Galloway, K. C., Wehner, M., Karpelson, M., Wood, R. J., & Whitesides, G. M. (2014) · Soft Robotics · doi:10.1089/soro.2014.0008 · Cited by 1,089
Self-citationA 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
Self-citation
Research works printed but not linked: 4
- Gorissen, B., De Volder, M., De Greef, A. & Reynaerts, D. Theoretical and experimental analysis of pneumatic balloon microactuators. Sens. Actuat. A 168, 58–65 (2011) · doi:10.1016/j.sna.2011.03.057
- Jensen, E. C., Grover, W. H. & Mathies, R. A. Micropneumatic digital logic structures for integrated microdevice computation and control. J. Microelectromech. Syst. 16, 1378–1385 (2007) · doi:10.1109/jmems.2007.906080
- Rhee, M. & Burns, M. A. Microfluidic pneumatic logic circuits and digital pneumatic microprocessors for integrated microfluidic systems. Lab Chip 9, 3131–3143 (2009) · doi:10.1039/b904354c
- Groisman, A., Enzelberger, M. & Quake, S. R. Microfluidic memory and control devices. Science 300, 955–958 (2003) · doi:10.1126/science.1083694
Cited by
Items 101–129 of 129
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
Kim, H., Lee, H., Ha, I., Jung, J., Won, P., Cho, H., Yeo, J., Hong, S., Han, S., Kwon, J., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801847 · Cited by 300
Transformer Hydrogels: A Review
Erol, O., Pantula, A., Liu, W., & Gracias, D. H. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900043 · Cited by 293
Fast and programmable locomotion of hydrogel-metal hybrids under light and magnetic fields
Li, C., Lau, G. C., Yuan, H., Aggarwal, A., Dominguez, V. L., Liu, S., Sai, H., Palmer, L. C., Sather, N. A., Pearson, T. J., et al. (2020) · Science Robotics · doi:10.1126/scirobotics.abb9822 · Cited by 291
Jones, T. J., Jambon-Puillet, E., Marthelot, J., & Brun, P.-T. (2021) · Nature · doi:10.1038/s41586-021-04029-6 · Cited by 290
Yasa, O., Toshimitsu, Y., Michelis, M. Y., Jones, L. S., Filippi, M., Buchner, T., & Katzschmann, R. K. (2023) · Annual Review of Control, Robotics, and Autonomous Systems · doi:10.1146/annurev-control-062322-100607 · Cited by 290
Cui, Y., Qin, Z., Wu, H., Li, M., & Hu, Y. (2021) · Nature Communications · doi:10.1038/s41467-021-21531-7 · Cited by 279
Research progress of flexible capacitive pressure sensor for sensitivity enhancement approaches
Li, R., Zhou, Q., Bi, Y., Cao, S., Xia, X., Yang, A., Li, S., & Xiao, X. (2021) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112425 · Cited by 276
3D-printed PEDOT:PSS for soft robotics
Li, J., Cao, J., Lu, B., & Gu, G. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00587-5 · Cited by 274
Origami and 4D printing of elastomer-derived ceramic structures
Liu, G., Zhao, Y., Wu, G., & Lu, J. (2018) · Science Advances · doi:10.1126/sciadv.aat0641 · Cited by 270
Reconfiguration, Camouflage, and Color‐Shifting for Bioinspired Adaptive Hydrogel‐Based Millirobots
Du, X., Cui, H., Xu, T., Huang, C., Wang, Y., Zhao, Q., Xu, Y., & Wu, X. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909202 · Cited by 261
Light-driven bimorph soft actuators: design, fabrication, and properties
Chen, Y., Yang, J., Zhang, X., Feng, Y., Zeng, H., Wang, L., & Feng, W. (2021) · Materials Horizons · doi:10.1039/d0mh01406k · Cited by 260
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
Zhang, C., Li, Y., Kang, W., Liu, X., & Wang, Q. (2021) · SusMat · doi:10.1002/sus2.11 · Cited by 256
Liquid Metal Based Soft Robotics: Materials, Designs, and Applications
Wang, X., Guo, R., & Liu, J. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800549 · Cited by 255
Heterogeneous sensing in a multifunctional soft sensor for human-robot interfaces
Kim, T., Lee, S., Hong, T., Shin, G., Kim, T., & Park, Y.-L. (2020) · Science Robotics · doi:10.1126/scirobotics.abc6878 · Cited by 235
“An automated manufacturing process, such as direct patterning of liquid conductors ( 12 , 68 , 86 ) or embedded 3D printing ( 18 , 87 , 88 ), will be highly useful to increase the uniformity of the product in this case.”
MethodSoft, tough, and fast polyacrylate dielectric elastomer for non-magnetic motor
Yin, L.-J., Zhao, Y., Zhu, J., Yang, M., Zhao, H., Pei, J.-Y., Zhong, S.-L., & Dang, Z.-M. (2021) · Nature Communications · doi:10.1038/s41467-021-24851-w · Cited by 224
Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Scalet, G. (2020) · Actuators · doi:10.3390/act9010010 · Cited by 209
Besse, N., Rosset, S., Zarate, J. J., & Shea, H. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700102 · Cited by 132
Advanced lithography materials: From fundamentals to applications
Zhang, Y., Yu, H., Wang, L., Wu, X., He, J., Huang, W., Ouyang, C., Chen, D., & Keshta, B. E. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103197 · Cited by 72
Soft three-dimensional robots with hard two-dimensional materials
Xu, W., & Gracias, D. H. (2019) · ACS Nano · doi:10.1021/acsnano.9b03051 · Cited by 62
Programmable soft robotics based on nano-textured thermo-responsive actuators
Kang, D. J., An, S., Yarin, A. L., & Anand, S. (2019) · Nanoscale · doi:10.1039/c8nr08215d · Cited by 51
Sachyani Keneth, E., Scalet, G., Layani, M., Tibi, G., Degani, A., Auricchio, F., & Magdassi, S. (2020) · Soft Robotics · doi:10.1089/soro.2018.0159 · Cited by 51
Sensors-integrated organ-on-a-chip for biomedical applications
Chen, H., Luo, Z., Lin, X., Zhu, Y., & Zhao, Y. (2023) · Nano Research · doi:10.1007/s12274-023-5651-9 · Cited by 47
McGinn, C., Bourke, E., Murtagh, A., Donovan, C., Lynch, P., Cullinan, M. F., & Kelly, K. (2020) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-019-01051-9 · Cited by 46
Mechanically Durable Memristor Arrays Based on a Discrete Structure Design
Wang, T., Cui, Z., Liu, Y., Lu, D., Wang, M., Wan, C., Leow, W. R., Wang, C., Pan, L., Cao, X., et al. (2022) · Advanced Materials · doi:10.1002/adma.202106212 · Cited by 42
Chemomechanics of dual-stage reprocessable thermosets
Luo, C., Zhang, B., Zhang, W., Yuan, C., Dunn, M., Ge, Q., & Yu, K. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2019.02.013 · Cited by 24
Endovascular Microrobotics for Neurointervention
Santiago-Dieppa, D. R., & Friend, J. (2024) · Annual Review of Control, Robotics, and Autonomous Systems · doi:10.1146/annurev-control-060523-010720 · Cited by 12
Metadata
- Authors
- Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J.
- Venue
- Nature
- Published
- 2016-08
- Volume
- 536
- Issue
- 7617
- Pages
- 451-455
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2515930553
- Cited by
- 2,127
- References
- 31
- FWCI
- 82.53
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.springer.com/tdm (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.