The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Open accessAbstract
Damage tolerance can be an elusive characteristic of structural materials requiring both high strength and ductility, properties that are often mutually exclusive. High-entropy alloys are of interest in this regard. Specifically, the single-phase CrMnFeCoNi alloy displays tensile strength levels of ∼1 GPa, excellent ductility (∼60–70%) and exceptional fracture toughness (KJIc>200 MPa√m). Here through the use of in situ straining in an aberration-corrected transmission electron microscope, we report on the salient atomistic to micro-scale mechanisms underlying the origin of these properties. We identify a synergy of multiple deformation mechanisms, rarely achieved in metallic alloys, which generates high strength, work hardening and ductility, including the easy motion of Shockley partials, their interactions to form stacking-fault parallelepipeds, and arrest at planar slip bands of undissociated dislocations. We further show that crack propagation is impeded by twinned, nanoscale bridges that form between the near-tip crack faces and delay fracture by shielding the crack tip.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Self-citationThe conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Self-citationChristian, J. W., & Mahajan, S. (1995) · Progress in Materials Science · doi:10.1016/0079-6425(94)00007-7 · Cited by 3,603
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Self-citationWu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Self-citationHigh strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application
Grässel, O., Krüger, L., Frommeyer, G., & Meyer, L. W. (2000) · International Journal of Plasticity · doi:10.1016/s0749-6419(00)00015-2 · Cited by 1,819
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Self-citationSchuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Self-citationTensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Self-citation
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Self-citationExceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Self-citationHigh entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationEnhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Self-citationMechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Laplanche, G., Kostka, A., Horst, O. M., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.038 · Cited by 1,198
Self-citationMechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
Self-citationLu, Y., Gao, X., Jiang, L., Chen, Z., Wang, T., Jie, J., Kang, H., Zhang, Y., Guo, S., Ruan, H., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.016 · Cited by 1,125
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Corrosion-Resistant High-Entropy Alloys: A Review
Shi, Y., Yang, B., & Liaw, P. (2017) · Metals · doi:10.3390/met7020043 · Cited by 1,038
Gao, X., Lu, Y., Zhang, B., Liang, N., Wu, G., Sha, G., Liu, J., & Zhao, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.041 · Cited by 887
Multicomponent high-entropy Cantor alloys
Cantor, B. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100754 · Cited by 877
Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
Ding, J., Yu, Q., Asta, M., & Ritchie, R. O. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1808660115 · Cited by 845
Self-citationLi, Q.-J., Sheng, H., & Ma, E. (2019) · Nature Communications · doi:10.1038/s41467-019-11464-7 · Cited by 795
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Self-citationHierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Shi, P., Li, R., Li, Y., Wen, Y., Zhong, Y., Ren, W., Shen, Z., Zheng, T., Peng, J., Liang, X., et al. (2021) · Science · doi:10.1126/science.abf6986 · Cited by 678
Zhang, Z., Sheng, H., Wang, Z., Gludovatz, B., Zhang, Z., George, E. P., Yu, Q., Mao, S. X., & Ritchie, R. O. (2017) · Nature Communications · doi:10.1038/ncomms14390 · Cited by 664
Self-citationLattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Corrosion of high entropy alloys
Qiu, Y., Thomas, S., Gibson, M. A., Fraser, H. L., & Birbilis, N. (2017) · npj Materials Degradation · doi:10.1038/s41529-017-0009-y · Cited by 604
Yang, M., Yan, D., Yuan, F., Jiang, P., Ma, E., & Wu, X. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1807817115 · Cited by 548
Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin
Liu, D., Yu, Q., Kabra, S., Jiang, M., Forna-Kreutzer, P., Zhang, R., Payne, M., Walsh, F., Gludovatz, B., Asta, M., et al. (2022) · Science · doi:10.1126/science.abp8070 · Cited by 543
Self-citationThe evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
Miao, J., Slone, C. E., Smith, T. M., Niu, C., Bei, H., Ghazisaeidi, M., Pharr, G. M., & Mills, M. J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.033 · Cited by 539
An overview of tailoring strain delocalization for strength-ductility synergy
Wu, H., & Fan, G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100675 · Cited by 536
Homogenization of Al CoCrFeNi high-entropy alloys with improved corrosion resistance
Shi, Y., Collins, L., Feng, R., Zhang, C., Balke, N., Liaw, P. K., & Yang, B. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.01.030 · Cited by 476
Shi, P., Zhong, Y., Li, Y., Ren, W., Zheng, T., Shen, Z., Yang, B., Peng, J., Hu, P., Zhang, Y., et al. (2020) · Materials Today · doi:10.1016/j.mattod.2020.09.029 · Cited by 464
Local Structure and Short-Range Order in a NiCoCr Solid Solution Alloy
Zhang, F. X., Zhao, S., Jin, K., Xue, H., Velisa, G., Bei, H., Huang, R., Ko, J. Y. P., Pagan, D. C., Neuefeind, J. C., et al. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.205501 · Cited by 451
Rao, J. C., Diao, H. Y., Ocelík, V., Vainchtein, D., Zhang, C., Kuo, C., Tang, Z., Guo, W., Poplawsky, J. D., Zhou, Y., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.066 · Cited by 439
Chen, S., Oh, H. S., Gludovatz, B., Kim, S. J., Park, E. S., Zhang, Z., Ritchie, R. O., & Yu, Q. (2020) · Nature Communications · doi:10.1038/s41467-020-14641-1 · Cited by 424
Self-citationMa, Y., Wang, Q., Jiang, B. B., Li, C. L., Hao, J. M., Li, X. N., Dong, C., & Nieh, T. G. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.050 · Cited by 410
Wani, I. S., Bhattacharjee, T., Sheikh, S., Bhattacharjee, P. P., Guo, S., & Tsuji, N. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.08.048 · Cited by 408
Machine learning for high-entropy alloys: Progress, challenges and opportunities
Liu, X., Zhang, J., & Pei, Z. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101018 · Cited by 397
A Novel Multinary Intermetallic as an Active Electrocatalyst for Hydrogen Evolution
Jia, Z., Yang, T., Sun, L., Zhao, Y., Li, W., Luan, J., Lyu, F., Zhang, L., Kruzic, J. J., Kai, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202000385 · Cited by 356
Zuo, T., Gao, M. C., Ouyang, L., Yang, X., Cheng, Y., Feng, R., Chen, S., Liaw, P. K., Hawk, J. A., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.013 · Cited by 332
Ming, K., Bi, X., & Wang, J. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.10.005 · Cited by 330
Self-citationHigh pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
Tracy, C. L., Park, S., Rittman, D. R., Zinkle, S. J., Bei, H., Lang, M., Ewing, R. C., & Mao, W. L. (2017) · Nature Communications · doi:10.1038/ncomms15634 · Cited by 329
Polymorphism in a high-entropy alloy
Zhang, F., Wu, Y., Lou, H., Zeng, Z., Prakapenka, V. B., Greenberg, E., Ren, Y., Yan, J., Okasinski, J. S., Liu, X., et al. (2017) · Nature Communications · doi:10.1038/ncomms15687 · Cited by 329
Cooperative deformation in high-entropy alloys at ultralow temperatures
Naeem, M., He, H., Zhang, F., Huang, H., Harjo, S., Kawasaki, T., Wang, B., Lan, S., Wu, Z., Wang, F., et al. (2020) · Science Advances · doi:10.1126/sciadv.aax4002 · Cited by 323
Self-citationDesign of D022 superlattice with superior strengthening effect in high entropy alloys
He, F., Chen, D., Han, B., Wu, Q., Wang, Z., Wei, S., Wei, D., Wang, J., Liu, C. T., & Kai, J.-J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.048 · Cited by 322
Self-citationLattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy
Lee, C., Chou, Y., Kim, G., Gao, M. C., An, K., Brechtl, J., Zhang, C., Chen, W., Poplawsky, J. D., Song, G., et al. (2020) · Advanced Materials · doi:10.1002/adma.202004029 · Cited by 318
A review on the dynamic-mechanical behaviors of high-entropy alloys
Tang, Y., Wang, R., Xiao, B., Zhang, Z., Li, S., Qiao, J., Bai, S., Zhang, Y., & Liaw, P. K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101090 · Cited by 314
Self-citationRecent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Bhattacharjee, T., Wani, I. S., Sheikh, S., Clark, I. T., Okawa, T., Guo, S., Bhattacharjee, P. P., & Tsuji, N. (2018) · Scientific Reports · doi:10.1038/s41598-018-21385-y · Cited by 303
From high-entropy alloys to complex concentrated alloys
Gorsse, S., Couzinié, J.-P., & Miracle, D. B. (2018) · Comptes Rendus. Physique · doi:10.1016/j.crhy.2018.09.004 · Cited by 293
Zhang, T. W., Ma, S. G., Zhao, D., Wu, Y. C., Zhang, Y., Wang, Z. H., & Qiao, J. W. (2020) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.08.013 · Cited by 293
Local chemical fluctuation mediated ductility in body-centered-cubic high-entropy alloys
Bu, Y., Wu, Y., Lei, Z., Yuan, X., Wu, H., Feng, X., Liu, J., Ding, J., Lu, Y., Wang, H., et al. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.022 · Cited by 278
Effect of Niobium on Microstructure and Properties of the CoCrFeNb Ni High Entropy Alloys
Jiang, H., Jiang, L., Qiao, D., Lu, Y., Wang, T., Cao, Z., & Li, T. (2017) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2016.09.016 · Cited by 275
Okamoto, N. L., Yuge, K., Tanaka, K., Inui, H., & George, E. P. (2016) · AIP Advances · doi:10.1063/1.4971371 · Cited by 274
Self-citationKube, S. A., Sohn, S., Uhl, D., Datye, A., Mehta, A., & Schroers, J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.023 · Cited by 270
Enhanced radiation tolerance of the Ni-Co-Cr-Fe high-entropy alloy as revealed from primary damage
Lin, Y., Yang, T., Lang, L., Shan, C., Deng, H., Hu, W., & Gao, F. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.06.027 · Cited by 265
Shkodich, N., Sedegov, A., Kuskov, K., Busurin, S., Scheck, Y., Vadchenko, S., & Moskovskikh, D. (2020) · Metals · doi:10.3390/met10091268 · Cited by 57
Metadata
- Authors
- Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O.
- Venue
- Nature Communications
- Published
- 2015-12-09
- Volume
- 6
- Issue
- 1
- Pages
- 10143-10143
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2195577347
- Cited by
- 845
- References
- 19
- FWCI
- 51.33
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.