The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries
Open accessAbstract
Innovative rechargeable batteries that can effectively store renewable energy, such as solar and wind power, urgently need to be developed to reduce greenhouse gas emissions. All-solid-state batteries with inorganic solid electrolytes and electrodes are promising power sources for a wide range of applications because of their safety, long-cycle lives and versatile geometries. Rechargeable sodium batteries are more suitable than lithium-ion batteries, because they use abundant and ubiquitous sodium sources. Solid electrolytes are critical for realizing all-solid-state sodium batteries. Here we show that stabilization of a high-temperature phase by crystallization from the glassy state dramatically enhances the Na+ ion conductivity. An ambient temperature conductivity of over 10−4 S cm−1 was obtained in a glass-ceramic electrolyte, in which a cubic Na3PS4 crystal with superionic conductivity was first realized. All-solid-state sodium batteries, with a powder-compressed Na3PS4 electrolyte, functioned as a rechargeable battery at room temperature. Rechargeable solid-state batteries are promising sources of energy for a range of applications. Hayashiet al. examine the electrochemistry of solid-state sodium batteries, and present an electrolyte that operates at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Chemistry of intercalation compounds: Metal guests in chalcogenide hosts
Whittingham, M. S. (1978) · Progress in Solid State Chemistry · doi:10.1016/0079-6786(78)90003-1 · Cited by 1,376
Electrochemical intercalation of sodium in NaxCoO2 bronzes
DELMAS, C., BRACONNIER, J., FOUASSIER, C., & HAGENMULLER, P. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90076-x · Cited by 903
Ohta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 899
New, Highly Ion‐Conductive Crystals Precipitated from Li2S–P2S5 Glasses
Mizuno, F., Hayashi, A., Tadanaga, K., & Tatsumisago, M. (2005) · Advanced Materials · doi:10.1002/adma.200401286 · Cited by 872
Self-citationSakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
Self-citationAdvanced materials for sodium-beta alumina batteries: Status, challenges and perspectives
Lu, X., Xia, G., Lemmon, J. P., & Yang, Z. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.120 · Cited by 600
Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO2
Komaba, S., Takei, C., Nakayama, T., Ogata, A., & Yabuuchi, N. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.12.033 · Cited by 579
Cited by
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Fundamentals of inorganic solid-state electrolytes for batteries
Famprikis, T., Canepa, P., Dawson, J. A., Islam, M. S., & Masquelier, C. (2019) · Nature Materials · doi:10.1038/s41563-019-0431-3 · Cited by 2,525
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
New horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
Electrolyte selection for supercapacitive devices: a critical review
Pal, B., Yang, S., Ramesh, S., Thangadurai, V., & Jose, R. (2019) · Nanoscale Advances · doi:10.1039/c9na00374f · Cited by 1,317
Li‐ion batteries: basics, progress, and challenges
Deng, D. (2015) · Energy Science & Engineering · doi:10.1002/ese3.95 · Cited by 1,227
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Benchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219
Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries
Fan, L., Wei, S., Li, S., Li, Q., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702657 · Cited by 1,179
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2013) · Scientific Reports · doi:10.1038/srep02261 · Cited by 1,051
Self-citationMetallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
A review of lithium and non-lithium based solid state batteries
Kim, J. G., Son, B., Mukherjee, S., Schuppert, N., Bates, A., Kwon, O., Choi, M. J., Chung, H. Y., & Park, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.054 · Cited by 783
High temperature sodium batteries: status, challenges and future trends
Hueso, K. B., Armand, M., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24086j · Cited by 774
Sodium‐Ion Batteries: From Academic Research to Practical Commercialization
Deng, J., Luo, W., Chou, S., Liu, H., & Dou, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701428 · Cited by 770
Zhao, C., Liu, L., Qi, X., Lu, Y., Wu, F., Zhao, J., Yu, Y., Hu, Y., & Chen, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703012 · Cited by 738
Sun, Y., Zhao, L., Pan, H., Lu, X., Gu, L., Hu, Y.-S., Li, H., Armand, M., Ikuhara, Y., Chen, L., et al. (2013) · Nature Communications · doi:10.1038/ncomms2878 · Cited by 683
Electrolyte design strategies and research progress for room-temperature sodium-ion batteries
Che, H., Chen, S., Xie, Y., Wang, H., Amine, K., Liao, X.-Z., & Ma, Z.-F. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00524e · Cited by 676
A High‐Energy Room‐Temperature Sodium‐Sulfur Battery
Xin, S., Yin, Y., Guo, Y., & Wan, L. (2014) · Advanced Materials · doi:10.1002/adma.201304126 · Cited by 632
A zero-strain layered metal oxide as the negative electrode for long-life sodium-ion batteries
Wang, Y., Yu, X., Xu, S., Bai, J., Xiao, R., Hu, Y.-S., Li, H., Yang, X.-Q., Chen, L., & Huang, X. (2013) · Nature Communications · doi:10.1038/ncomms3365 · Cited by 616
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
High-safety separators for lithium-ion batteries and sodium-ion batteries: advances and perspective
Zhang, L., Li, X., Yang, M., & Chen, W. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.06.033 · Cited by 587
Polyanion‐Type Electrode Materials for Sodium‐Ion Batteries
Ni, Q., Bai, Y., Wu, F., & Wu, C. (2017) · Advanced Science · doi:10.1002/advs.201600275 · Cited by 586
Electrolyte and Interface Engineering for Solid-State Sodium Batteries
Lu, Y., Li, L., Zhang, Q., Niu, Z., & Chen, J. (2018) · Joule · doi:10.1016/j.joule.2018.07.028 · Cited by 556
Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond
Lou, S., Zhang, F., Fu, C., Chen, M., Ma, Y., Yin, G., & Wang, J. (2021) · Advanced Materials · doi:10.1002/adma.202000721 · Cited by 548
Huang, Y., Zhao, L., Li, L., Xie, M., Wu, F., & Chen, R. (2019) · Advanced Materials · doi:10.1002/adma.201808393 · Cited by 495
Tatsumisago, M., Nagao, M., & Hayashi, A. (2013) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2013.03.005 · Cited by 471
Self-citationEshetu, G. G., Elia, G. A., Armand, M., Forsyth, M., Komaba, S., Rojo, T., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000093 · Cited by 470
Elastic Properties of Alkali Superionic Conductor Electrolytes from First Principles Calculations
Deng, Z., Wang, Z., Chu, I.-H., Luo, J., & Ong, S. P. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0061602jes · Cited by 406
Compatibility issues between electrodes and electrolytes in solid-state batteries
Tian, Y., Shi, T., Richards, W. D., Li, J., Kim, J. C., Bo, S.-H., & Ceder, G. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00534b · Cited by 396
Toward Flexible and Wearable Human‐Interactive Health‐Monitoring Devices
Takei, K., Honda, W., Harada, S., Arie, T., & Akita, S. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201400546 · Cited by 371
Design Strategies to Enable the Efficient Use of Sodium Metal Anodes in High‐Energy Batteries
Sun, B., Xiong, P., Maitra, U., Langsdorf, D., Yan, K., Wang, C., Janek, J., Schröder, D., & Wang, G. (2020) · Advanced Materials · doi:10.1002/adma.201903891 · Cited by 355
Solid Electrolyte Interphases on Sodium Metal Anodes
Bao, C., Wang, B., Liu, P., Wu, H., Zhou, Y., Wang, D., Liu, H., & Dou, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004891 · Cited by 354
Design Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
Ambient Temperature Sodium–Sulfur Batteries
Manthiram, A., & Yu, X. (2015) · Small · doi:10.1002/smll.201403257 · Cited by 344
Kwak, H., Wang, S., Park, J., Liu, Y., Kim, K. T., Choi, Y., Mo, Y., & Jung, Y. S. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c00438 · Cited by 341
Revitalising sodium–sulfur batteries for non-high-temperature operation: a crucial review
Wang, Y., Zhou, D., Palomares, V., Shanmukaraj, D., Sun, B., Tang, X., Wang, C., Armand, M., Rojo, T., & Wang, G. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02203a · Cited by 327
Development of solid-state electrolytes for sodium-ion battery–A short review
Wang, Y., Song, S., Xu, C., Hu, N., Molenda, J., & Lu, L. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.02.007 · Cited by 326
Data-Driven First-Principles Methods for the Study and Design of Alkali Superionic Conductors
Deng, Z., Zhu, Z., Chu, I.-H., & Ong, S. P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02648 · Cited by 321
Zheng, X., Bommier, C., Luo, W., Jiang, L., Hao, Y., & Huang, Y. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.014 · Cited by 321
Sodium superionic conduction in Na2B12H12
Udovic, T. J., Matsuo, M., Unemoto, A., Verdal, N., Stavila, V., Skripov, A. V., Rush, J. J., Takamura, H., & Orimo, S.-I. (2014) · Chem. Commun. · doi:10.1039/c3cc49805k · Cited by 319
Tang, W. S., Unemoto, A., Zhou, W., Stavila, V., Matsuo, M., Wu, H., Orimo, S.-I., & Udovic, T. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02941d · Cited by 314
Solid electrolytes and interfaces in all-solid-state sodium batteries: Progress and perspective
Hou, W., Guo, X., Shen, X., Amine, K., Yu, H., & Lu, J. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.036 · Cited by 314
Design and synthesis of the superionic conductor Na10SnP2S12
Richards, W. D., Tsujimura, T., Miara, L. J., Wang, Y., Kim, J. C., Ong, S. P., Uechi, I., Suzuki, N., & Ceder, G. (2016) · Nature Communications · doi:10.1038/ncomms11009 · Cited by 312
Challenges of today for Na-based batteries of the future: From materials to cell metrics
Hasa, I., Mariyappan, S., Saurel, D., Adelhelm, P., Koposov, A. Y., Masquelier, C., Croguennec, L., & Casas-Cabanas, M. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228872 · Cited by 305
Huang, J., Wu, K., Xu, G., Wu, M., Dou, S., & Wu, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01029a · Cited by 304
A review of challenges and issues concerning interfaces for all-solid-state batteries
Lim, H.-D., Park, J.-H., Shin, H.-J., Jeong, J., Kim, J. T., Nam, K.-W., Jung, H.-G., & Chung, K. Y. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.10.011 · Cited by 302
Nanostructured positive electrode materials for post-lithium ion batteries
Wang, F., Wu, X., Li, C., Zhu, Y., Fu, L., Wu, Y., & Liu, X. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02070d · Cited by 293
Chu, I.-H., Kompella, C. S., Nguyen, H., Zhu, Z., Hy, S., Deng, Z., Meng, Y. S., & Ong, S. P. (2016) · Scientific Reports · doi:10.1038/srep33733 · Cited by 290
Xu, G., Amine, R., Abouimrane, A., Che, H., Dahbi, M., Ma, Z., Saadoune, I., Alami, J., Mattis, W. L., Pan, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702403 · Cited by 287
Surface-Driven Sodium Ion Energy Storage in Nanocellular Carbon Foams
Shao, Y., Xiao, J., Wang, W., Engelhard, M., Chen, X., Nie, Z., Gu, M., Saraf, L. V., Exarhos, G., Zhang, J.-G., et al. (2013) · Nano Letters · doi:10.1021/nl401995a · Cited by 280
Current trends and future challenges of electrolytes for sodium-ion batteries
Vignarooban, K., Kushagra, R., Elango, A., Badami, P., Mellander, B.-E., Xu, X., Tucker, T. G., Nam, C., & Kannan, A. M. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.12.090 · Cited by 278
Wenzel, S., Leichtweiss, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10119 · Cited by 275
Exceptional Superionic Conductivity in Disordered Sodium Decahydro‐closo‐decaborate
Udovic, T. J., Matsuo, M., Tang, W. S., Wu, H., Stavila, V., Soloninin, A. V., Skoryunov, R. V., Babanova, O. A., Skripov, A. V., Rush, J. J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201403157 · Cited by 271
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Zhu, Z., Chu, I.-H., Deng, Z., & Ong, S. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03656 · Cited by 258
Powering implantable and ingestible electronics
Yang, S., Sencadas, V., You, S. S., Jia, N. Z., Srinivasan, S. S., Huang, H., Ahmed, A. E., Liang, J. Y., & Traverso, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009289 · Cited by 183
Metadata
- Authors
- Hayashi, A., Noi, K., Sakuda, A., & Tatsumisago, M.
- Venue
- Nature Communications
- Published
- 2012-05-22
- Volume
- 3
- Issue
- 1
- Pages
- 856-856
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2113234830
- Cited by
- 1,060
- References
- 16
- FWCI
- 23.40
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.