Nanobatteries in redox-based resistive switches require extension of memristor theory
Open accessThe DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index; 2 of the 6 sources its claims cite were checked for support.
Abstract
Redox-based nanoionic resistive memory cells are one of the most promising emerging nanodevices for future information technology with applications for memory, logic and neuromorphic computing. Recently, the serendipitous discovery of the link between redox-based nanoionic-resistive memory cells and memristors and memristive devices has further intensified the research in this field. Here we show on both a theoretical and an experimental level that nanoionic-type memristive elements are inherently controlled by non-equilibrium states resulting in a nanobattery. As a result, the memristor theory must be extended to fit the observed non-zero-crossing I–V characteristics. The initial electromotive force of the nanobattery depends on the chemistry and the transport properties of the materials system but can also be introduced during redox-based nanoionic-resistive memory cell operations. The emf has a strong impact on the dynamic behaviour of nanoscale memories, and thus, its control is one of the key factors for future device development and accurate modelling. The original definition of a memristor envisions a two-terminal memory device with a pinched, zero-crossing hysteresis loop. As the authors show here, an electromotive force leads to non-zero-crossing characteristics in nanoionic-type memristors, implying that the memristor definition must be amended.
Overview
CoChat Summary
## TL;DR
The paper argues that redox-based resistive switching memories (ReRAM) are not pure passive memristors because they generate an internal electromotive force (emf) from non-equilibrium chemical potential gradients. The authors show experimentally and theoretically that this “nanobattery” can reach up to a few hundred millivolts and requires extending memristor theory to account for non-zero-crossing I–V behavior.
## Key findings
- Across the ReRAM cells tested, the authors report significant (electro)chemical potential gradients generated during operation, producing an emf and making the devices behave as nanoscale batteries.
- In Ag/SiO2/Pt cells, the short-circuit discharge after RESET released a total charge of about 5 nC, which the authors say corresponds to about 2 monolayers of Ag; the dielectric discharge of the cell capacitor was about 0.4 pC.
- For Ag/Ag–GeS2.2/Pt and Ag/Ag–GeSe2.3/Pt systems, the authors say they demonstrated a Nernst emf and observed an emf of about −450 mV in a voltage-modified state.
- The paper states that ReRAM cells show non-zero-crossing I–V behavior, so the original memristor theory must be extended; the authors model this with an added emf source and nonlinear internal resistance.
## Methods
- The study combined theoretical modeling with electrical measurements on ECM and VCM ReRAM cells.
- Sample set included Ag/SiO2/Pt, Ag/Ag–GeS2.2/Pt, Ag/Ag–GeSe2.3/Pt, plus selected WOx, SrTiO3, and Ta2O5 cells prepared on platinised silicon wafers.
- Measurements were done in a four-needle microprobe station; I–V sweeps used triangular voltages from −1.5 to 1.5 V at sweep rates of 30 mV s−1 to 2 V s−1, and emf was measured with high-impedance instruments for comparison.
## Limitations
- The paper states that the contribution of the Gibbs–Thomson potential could not be clearly distinguished from the diffusion potential in the systems they studied.
- The text makes evident that some measurements are system-specific and rely on particular material stacks and cell states; the authors do not claim the same quantitative emf values for every ReRAM structure (evident from the text).
- The paper notes that detailed measurement resolution/accuracy and additional modeling details are in the Supplementary Material, so some methodological specifics are not fully contained in the main text (evident from the text).
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
2 Valid · 0 Not valid · 3 Not checked · 47 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Here we show on both a theoretical and an experimental level that nanoionic-type memristive elements are inherently controlled by non-equilibrium states resulting in a nanobattery.”
§ Nanobatteries in redox-based resistive switches require extension of memristor theory > Abstract
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The decrease of Vcell over a few hundred seconds is caused by the equilibration of the Ag+ and OH− concentration gradient, which has an initial maximum immediately at the metal/electrolyte interface.”
§ Nanobatteries in redox-based resistive switches require extension of memristor theory > Results > ReRAM cells based on initially insulating thin films
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Here, we report on non-equilibrium ON and OFF states in ReRAM cells determined by chemical potential gradients generating an electromotive force of up to a few hundred millivolts, violating the zero-crossing property.”
§ Nanobatteries in redox-based resistive switches require extension of memristor theory > Abstract
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“We were able to prove that in all types of ReRAM cells tested significant (electro)chemical potential gradients are generated by the operation of the cells.”
§ Nanobatteries in redox-based resistive switches require extension of memristor theory > Results > Emfs for different types of VCM and ECM memory cells
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“We succeeded in demonstrating a Nernst emf in accordance with equation (11) (Fig. 1a) for the systems Ag/Ag–GeS2.2/Pt and Ag/Ag–GeSe2.3/Pt, which contain a significant amount of chemically dissolved Ag+ ions (a solubility of up to 35 at% Ag has been reported29).”
§ Nanobatteries in redox-based resistive switches require extension of memristor theory > Results > ReRAM cells based on mixed conducting thin films
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
33 more claims
Create a free account to see all 52 claims and every source verdict.
- Probably not a substantial claim. 4
- It may state two separate claims as one. 11
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
Bard, A. J., & Faulkner, L. R. (1980) · Cited by 22,822
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Memristor—The Missing Circuit Element
Chua, L. (1971) · IEEE Transactions on Circuit Theory · doi:10.1109/tct.1971.1083337 · Cited by 10,268 · cited 2×
“5) z: charge number (1) T: temperature (300 K) In equation (s11) and (s13), dynamic effects, in particular the impact of the sweep rate(7), diffusion limitation(8) and potential multi-step redox-reactions, are neglected to simplify the model.”
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080 · cited 4×
“Then the potential-determining half-cell reaction at the s00 interface will be the same as at s0, that is, reaction (4), and, because no chemical potential gradient of the charged species is assumed, equation (3) can be simplified to:”
InfluentialSelf-citationNanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Self-citationSimmons, J. G. (1963) · Journal of Applied Physics · doi:10.1063/1.1702682 · Cited by 4,200
Memristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885
Memristive devices and systems
Chua, L. O., & Kang, S. M. (1976) · Proceedings of the IEEE · doi:10.1109/proc.1976.10092 · Cited by 2,604 · cited 1×
“The total emf of the ECM cell is a combination of equations (5) and (9) and is expressed by:”
‘Memristive’ switches enable ‘stateful’ logic operations via material implication
Borghetti, J., Snider, G. S., Kuekes, P. J., Yang, J. J., Stewart, D. R., & Williams, R. S. (2010) · Nature · doi:10.1038/nature08940 · Cited by 1,929 · cited 3×
“Then the potential-determining half-cell reaction at the s00 interface will be the same as at s0, that is, reaction (4), and, because no chemical potential gradient of the charged species is assumed, equation (3) can be simplified to:”
Short-term plasticity and long-term potentiation mimicked in single inorganic synapses
Ohno, T., Hasegawa, T., Tsuruoka, T., Terabe, K., Gimzewski, J. K., & Aono, M. (2011) · Nature Materials · doi:10.1038/nmat3054 · Cited by 1,793
Research works printed but not linked: 2
- Vetter, KJ. Electrochemical Kinetics Springer Verlag (1961).
- ITRS. The International Technology Roadmap for Semiconductors— ITRS 2011 Edition 2011..
Cited by
Items 301–400 of 591
A novel hyperchaotic map with sine chaotification and discrete memristor
Sun, Q., He, S., Sun, K., & Wang, H. (2022) · Chinese Physics B · doi:10.1088/1674-1056/ac8f3a · Cited by 16
High Robustness Memristor Neural State Machines
Tian, L., Wang, Y., Shi, L., & Zhao, R. J. (2020) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.0c00700 · Cited by 16
Memory and Energy Storage Dual Operation in Chalcogenide-Based CBRAM
Lee, D., Oukassi, S., Molas, G., Carabasse, C., Salot, R., & Perniola, L. (2017) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2017.2693220 · Cited by 15
High On/Off Ratio Carbon Quantum Dot–Chitosan Biomemristors with Coplanar Nanogap Electrodes
Raeis‐Hosseini, N., Georgiadou, D. G., & Papavassiliou, C. (2022) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.2c00979 · Cited by 15
Liquid‐Metal‐Induced Memristor Behavior in Polymer Insulators
Zaheer, M., Cai, Y., Waqas, A. B., Abbasi, S. F., Zhu, G., Cong, C., Qiu, Z., Liu, R., Qin, Y., Zheng, L., et al. (2020) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202000050 · Cited by 15
Sugiyama, I., Shimizu, R., Suzuki, T., Yamamoto, K., Kawasoko, H., Shiraki, S., & Hitosugi, T. (2017) · APL Materials · doi:10.1063/1.4980031 · Cited by 15
Lee, S., Oh, S.-H., Ji, Y., Kim, J., Kang, R., Khim, D., Lee, S., Yeo, J.-S., Lü, N., Kim, M. J., et al. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.02.027 · Cited by 14
Neuromorphic behaviors of N-type locally-active memristor
Wang, S., Lü, Z., Liang, Y., & Wang, G. (2022) · Acta Physica Sinica · doi:10.7498/aps.71.20212017 · Cited by 15
de Avila, L. B., Serrano, P. A., Dantas, A., Cuevas-Arizaca, E. E., Kumar, D., & Müller, C. K. (2022) · Nanomaterials · doi:10.3390/nano12162881 · Cited by 14
Xie, Z., Zhuge, C., Li, C., Zhao, Y., Jiang, J., Zhou, J., Fu, Y., Li, Y., Xie, Z., Wang, Q., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c14555 · Cited by 14
Battistoni, S., Verna, A., Marasso, S. L., Cocuzza, M., & Erokhin, V. V. (2020) · physica status solidi (a) · doi:10.1002/pssa.201900985 · Cited by 15
On the origin of resistive switching volatility in Ni/TiO2/Ni stacks
Cortese, S., Trapatseli, M., Khiat, A., & Prodromakis, T. (2016) · Journal of Applied Physics · doi:10.1063/1.4960690 · Cited by 16
Milano, G., Miranda, E. A., Fretto, M., Valov, I., & Ricciardi, C. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c11022 · Cited by 16
Self-citationChang, C., Zeng, F., Li, X. J., Dong, W. S., Lu, S., Gao, S., & Pan, F. (2016) · Scientific Reports · doi:10.1038/srep18915 · Cited by 14
He, N., Sun, Y., Yuan, Q., Wang, Y., & Zuo, S. (2023) · Materials Science and Engineering B · doi:10.1016/j.mseb.2023.116578 · Cited by 17
Yang, X., Ren, Z., Pan, F., et al. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.06.131 · Cited by 14
Khan, M. U., Hassan, G., & Bae, J. (2020) · Journal of Electronic Materials · doi:10.1007/s11664-020-08200-z · Cited by 13
Filatova, E. O., Baraban, A. P., Konashuk, A. S., Konyushenko, M. A., Селиванов, А. А., Sokolov, A. A., Schaefers, F., & Drozd, V. E. (2014) · New Journal of Physics · doi:10.1088/1367-2630/16/11/113014 · Cited by 14
Qi, M., Fu, T., Yang, H., Tao, Y., Li, C., & Xiu, X. (2021) · Semiconductor Science and Technology · doi:10.1088/1361-6641/ac3cc7 · Cited by 13
A Cu/HZO/GeS/Pt Memristor for Neuroinspired Computing
Zhu, Z., Pei, Y., Gao, C., Wang, H., & Yan, X. (2021) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202100072 · Cited by 13
Johnson, B. A., Brahim, K., Balanov, A. G., Savel'ev, S. E., & Borisov, P. (2021) · Applied Physics Letters · doi:10.1063/5.0030918 · Cited by 13
In Memory Energy Application for Resistive Random Access Memory
Trotti, P., Oukassi, S., Molas, G., Bernard, M., Aussenac, F., & Pillonnet, G. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100297 · Cited by 13
Roy, S., Sahu, M. C., Jena, A. K., Mallik, S. K., Padhan, R., Mohanty, J. R., & Sahoo, S. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400557 · Cited by 19
Effects of moisture barriers on resistive switching in Pt-dispersed SiO2 nanometallic thin films
Choi, B. J., & Chen, I. (2013) · Applied Physics A · doi:10.1007/s00339-013-7776-2 · Cited by 13
Composition and sequence-controlled conductance of crystalline unimolecular monolayers
Wang, J., Zhao, Y., Li, S., Shen, L., Zhang, H., Ding, C., Wei, C., Wang, Y., Li, Y., Hong, W., et al. (2023) · Science Advances · doi:10.1126/sciadv.adh0667 · Cited by 14
Non-ideal memristors for a non-ideal world
Gale, E. (2014) · physica status solidi (a) · doi:10.1002/pssa.201400169 · Cited by 13
Krishnan, K., Tsuruoka, T., & Aono, M. (2016) · Japanese Journal of Applied Physics · doi:10.7567/jjap.55.06gk02 · Cited by 13
Robust Memristor Networks for Neuromorphic Computation Applications
Hajtó, D., Rák, Á., & Cserey, G. (2019) · Materials · doi:10.3390/ma12213573 · Cited by 13
Senapati, A., Roy, S., Lin, Y., Dutta, M., & Maikap, S. (2020) · Electronics · doi:10.3390/electronics9071106 · Cited by 14
Michelakaki, I., Bousoulas, P., Stathopoulos, S., Boukos, N. K., & Tsoukalas, D. (2016) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aa5161 · Cited by 16
Rahman, M. A., Tawfik, S. A., Ahmed, T., Spencer, M. J. S., Walia, S., Sriram, S., & Bhaskaran, M. C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b20585 · Cited by 13
Resistive switching transparent SnO2 thin film sensitive to light and humidity
Kalateh, A., Jalali, A., Ashtiani, M. J. K., Mohammadimasoudi, M., Bastami, H., & Mohseni, S. M. (2023) · Scientific Reports · doi:10.1038/s41598-023-45790-0 · Cited by 12
Memristive Devices for Quantum Metrology
Milano, G., Lupi, F. F., Fretto, M., Ricciardi, C., Leo, N. D., & Boarino, L. (2020) · Advanced Quantum Technologies · doi:10.1002/qute.202000009 · Cited by 12
Kim, Y. S., Park, J. W., Lee, J.-H., Choi, I. A., Heo, J., & Kim, H. J. (2017) · Applied Physics Letters · doi:10.1063/1.4998493 · Cited by 12
Rajagopal, K., Pone, J. R. M., Kingni, S. T., et al. (2019) · The European Physical Journal Special Topics · doi:10.1140/epjst/e2019-900043-4 · Cited by 12
Zhao, X., Wang, Z., Lin, Y., Xu, H., & Liu, Y. (2019) · Applied Physics Letters · doi:10.1063/1.5096197 · Cited by 11
Effect of device, size, activation energy, temperature, and frequency on memristor switching time
Abunahla, H., Mohammad, B. S., & Homouz, D. (2014) · doi:10.1109/icm.2014.7071806 · Cited by 12
Köymen, I., Gokturk, P. A., Kocabas, C., & Süzer, Ş. (2019) · Faraday discussions · doi:10.1039/c8fd00129d · Cited by 9
Memristive networks: From graph theory to statistical physics
Zegarac, A., & Caravelli, F. (2019) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/125/10001 · Cited by 12
Fractional-order memristive dynamics in colloidal graphitic carbon nitride systems
Fortulan, R., Kheirabadi, N. R., Raeisi‐Kheirabadi, N., Nezamzadeh‐Ejhieh, A., Chiolerio, A., & Adamatzky, A. (2024) · Physical review. E · doi:10.1103/physreve.110.034607 · Cited by 14
Synaptic Plasticity in Semiconducting Single‐Walled Carbon Nanotubes Transistors
Talsma, W., van Loo, H., Shao, S., Jung, S., Allard, S., Scherf, U., & Loi, M. A. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000154 · Cited by 12
Moisture influence in emerging neuromorphic device
Wang, W., & Zhou, G. (2023) · Frontiers of Physics · doi:10.1007/s11467-023-1272-8 · Cited by 14
Polymer-Assisted Solution Processing of TiO2Thin Films for Resistive-Switching Random Access Memory
Vishwanath, S. K., Jeon, S., & Kim, J.-H. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0121702jes · Cited by 12
Perovskite Quantum Dot-Based Memory Technologies: Insights from Emerging Trends
Ullah, F., Fredj, Z., & Sawan, M. (2025) · Nanomaterials · doi:10.3390/nano15110873 · Cited by 15
A Compact Model for Interface-Type Self-Rectifying Resistive Memory With Experiment Verification
Kim, J., Beom, J.-S., Lee, H., et al. (2024) · IEEE Access · doi:10.1109/access.2024.3349463 · Cited by 11
Lim, S., Kwak, M., & Hwang, H. (2019) · Nanotechnology · doi:10.1088/1361-6528/ab32a7 · Cited by 10
Resistive switching and battery-like characteristics in highly transparent Ta2O5/ITO thin-films
Khone, D. S., Kumar, S., Balal, M., Barman, S. R., Kumar, S., & Rana, A. (2023) · Scientific Reports · doi:10.1038/s41598-023-40891-2 · Cited by 13
Schmitt, N., Ascoli, A., Messaris, I., Demirkol, A. Ş., Menzel, S., Rana, V., Tetzlaff, R., & Chua, L. O. (2024) · Frontiers in Nanotechnology · doi:10.3389/fnano.2024.1301320 · Cited by 10
Soni, R., Meuffels, P., Petraru, A., Hansen, M., Ziegler, M., Vavra, O., Kohlstedt, H., & Jeong, D. S. (2013) · Nanoscale · doi:10.1039/c3nr03993e · Cited by 10
Krishnan, K., & Vijayaraghavan, S. (2023) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-022-09697-2 · Cited by 12
Zhang, B., Deng, F., Zhao, X., & Zhang, C. (2016) · IET Control Theory and Applications · doi:10.1049/iet-cta.2016.0039 · Cited by 11
Flexibly Photo-Regulated Brain-Inspired Functions in Flexible Neuromorphic Transistors
Wang, L., Zhang, T., Shen, J., Huang, J., Li, W., Shi, W. Y., Huang, W., & Yi, M. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c22754 · Cited by 10
Siemon, A., Ferch, S., Heittmann, A., Waser, R., Wouters, D. J., & Menzel, S. (2019) · APL Materials · doi:10.1063/1.5108658 · Cited by 10
Self-citationSeparators and electrolytes for rechargeable batteries: Fundamentals and perspectives
Nestler, T., Roedern, E., Uvarov, N. F., Hanzig, J., Elia, G. A., & de Vivanco, M. U. (2018) · Physical Sciences Reviews · doi:10.1515/psr-2017-0115 · Cited by 10
Offset reduction on memristor emulator circuits
Sánchez-López, C., Carrasco-Aguilar, M. A., & Morales-López, F. E. (2015) · IEEE International Conference on Electronics, Circuits and Systems (ICECS) · doi:10.1109/icecs.2015.7440307 · Cited by 9
Deb, R., Mallik, S., Mishra, Y., Padhan, R., Sahoo, S., Terabe, K., Tsuruoka, T., & Mohapatra, S. R. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c00529 · Cited by 11
Volatility Characterization for RRAM Devices
(2016) · doi:10.1109/led.2016.2631631 · Cited by 9
Effect of light-induced drop in electrical resistance of bulk SrTiO3 crystals
Shablaev, S. I., & Grachev, A. I. (2014) · Physics of the Solid State · doi:10.1134/s1063783414040301 · Cited by 9
Chamgoué, A. C., Sriram, S., Kuate, P. D. K., Kingni, S. T., & Rajagopal, K. (2023) · Physica Scripta · doi:10.1088/1402-4896/acca53 · Cited by 9
Jiang, K., Zheng, Z., Hu, S., Zhao, Z., & Wang, H. (2025) · Applied Physics Reviews · doi:10.1063/5.0230269 · Cited by 12
‘Stateful’ threshold switching for neuromorphic learning
Zhong, Z., Jiang, Z., Huang, J., Gao, F., Hu, W. H., Zhang, Y., & Chen, X. (2022) · Nanoscale · doi:10.1039/d1nr05502j · Cited by 9
Low-power perovskite-based threshold switching memristor for artificial nociceptor
Li, Y., Li, J., Ni, J., Zhang, J., & Cai, H. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.175121 · Cited by 9
A mean-field model of memristive circuit interaction
Caravelli, F., & Barucca, P. (2018) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/122/40008 · Cited by 9
Electrochemical memristive devices based on submonolayer metal deposition
Pragnya, P., Pinkowitz, A., Hull, R. V., & Gall, D. (2019) · APL Materials · doi:10.1063/1.5110889 · Cited by 8
Deng, Y., Xu, X., Zhang, L., Du, F., Liu, Q., Chen, J., Meng, K., Wu, Y., Yang, M., & Jiang, Y. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.04.029 · Cited by 9
Borowiec, J., Liang, W., Boi, F. S., He, Y., Wang, S., & Gillin, W. P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123745 · Cited by 7
Reset switching statistics of TaOx-based Memristor
Lian, X., Wang, M., Yan, P., Yang, J. J., & Miao, F. (2017) · Journal of Electroceramics · doi:10.1007/s10832-017-0094-x · Cited by 8
Liu, Q., Li, Y., Wang, W., Yue, W., Gao, S., Zhang, C., Cao, B., & Chen, Z. (2019) · Applied Physics Express · doi:10.7567/1882-0786/ab4d30 · Cited by 8
Amorphous Metal Oxide Bilayers to Avoid Sneak‐Path Currents for High‐Density Resistive Memory Arrays
Nirantar, S., Rahman, M. A., Mayes, E. L. H., et al. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202000222 · Cited by 8
Li, H., Gao, Q., Gao, J., Huang, J., Geng, X., Wang, G., Liang, B., Li, X., Wang, M., Xiao, Z., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c07179 · Cited by 8
Modeling the VCM‐ and ECM‐Type Switching Kinetics
Menzel, S., & Hur, J. (2016) · Wiley eBooks · doi:10.1002/9783527680870.ch14 · Cited by 13
Revolutionizing neuromorphic computing with memristor-based artificial neurons
Chen, Y., Zhang, G., Liu, F., Wu, B., Deng, Y., Gao, D., & Zhang, Y. (2025) · Journal of Semiconductors · doi:10.1088/1674-4926/24110006 · Cited by 14
Resistance switching devices based on amorphous insulator-metal thin filmsPreprint
Yang, X. Y. (2014) · arXiv (Cornell University) · doi:10.48550/arxiv.1412.2083 · Cited by 9
Kumar, D., Li, H., Divyanshu, D., Kumbhar, D. D., Rajbhar, M. K., Singh, A., Syed, A. M., Amara, S., Setti, G., & El‐Atab, N. (2026) · Advanced Science · doi:10.1002/advs.75318 · Cited by 10
Memristive response and electrochemical processes in polyaniline based organic devices
Cifarelli, A., Berzina, T., Parisini, A., et al. (2020) · Organic Electronics · doi:10.1016/j.orgel.2020.105757 · Cited by 7
TiO2 in memristors and resistive random access memory devices
Zaffora, A., Franco, F. D., Macaluso, R., & Santamaria, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819960-2.00020-1 · Cited by 8
Lee, S. H., Lee, M. J., Ahn, H., Park, J., Kim, S. J., Lee, K., Kim, T. H., Lee, G. M., Kim, K., & Shim, J. W. (2025) · Small · doi:10.1002/smll.202504328 · Cited by 9
Modeling and device parameter design to improve reset time in binary-oxide memristors
Abunahla, H., Homouz, D., Halawani, Y., et al. (2014) · Applied Physics A · doi:10.1007/s00339-014-8786-4 · Cited by 7
Recent progress of low-voltage memristor for neuromorphic computing
Yi-Chun, G., Jian-Yu, M., Wu, S., Yi, M.-D., Xie, L.-H., Huang, W., & Ling, H.-F. (2024) · Acta Physica Sinica · doi:10.7498/aps.73.20241022 · Cited by 9
Introduction to non-volatile memory
Tappertzhofen, S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-814629-3.00001-5 · Cited by 9
Self-citationBorowiec, J., Liu, M., Liang, W., Kreouzis, T., Bevan, A. J., He, Y., Ma, Y., & Gillin, W. P. (2020) · Nanomaterials · doi:10.3390/nano10112103 · Cited by 7
New insights into redox based resistive switches
Tappertzhofen, S., Waser, R. M., Valov, I., & Waser, R. M. (2013) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2013.6851054 · Cited by 7
Self-citationKurochka, K. V., Melnikova, N. V., Alikin, D., & Kurennykh, T. E. (2019) · Solid State Ionics · doi:10.1016/j.ssi.2019.115026 · Cited by 7
ReRAM Cells in the Framework of Two‐Terminal Devices
Linn, E., Ventra, M. D., & Pershin, Y. V. (2016) · Wiley eBooks · doi:10.1002/9783527680870.ch2 · Cited by 7
Self-citation
Metadata
- Authors
- Valov, I., Linn, E., Tappertzhofen, S., Schmelzer, S., van den Hurk, J., Lentz, F., & Waser, R.
- Affiliations
- RWTH Aachen University (DE)
- Forschungszentrum Jülich (DE)
- Corresponding author
- Valov, I.
- Venue
- Nature Communications
- Published
- 2013-04-23
- Volume
- 4
- Issue
- 1
- Pages
- 1771-1771
- ISSN
- 2041-1723 (ISSN-L)
- PMC
- PMC3644102
- OpenAlex
- W1975647260
- Cited by
- 587
- References
- 48
- Citations by year
- 2026: 36 · 2025: 28 · 2024: 34 · 2023: 38 · 2022: 42 · 2021: 53 · 2020: 51 · 2019: 51 · 2018: 57 · 2017: 50 · 2016: 56 · 2015: 34 · 2014: 38 · 2013: 19
- FWCI
- 29.36
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-nc-nd
- creativecommons.org/licenses/by-nc-nd/3.0/ (tdm)
- creativecommons.org/licenses/by-nc-nd/3.0/ (vor)
- Locations
- Nature Communications (publishedVersion, cc-by-nc-nd)
- Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Cambridge University Engineering Department Publications Database (submittedVersion)
- JuSER (Forschungszentrum Jülich) (submittedVersion, cc-by-nc-nd)
- RWTH Publications (RWTH Aachen) (submittedVersion)
- arXiv (Cornell University)
- Funders
- Samsung Advanced Institute of Technology
- Deutsche Forschungsgemeinschaft (SFB-917)
- Samsung
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- nanobatteries, memristors, electromotive force, non-equilibrium states, hysteresis loops, neuromorphic computing, device modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-09-29, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-29 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.