The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Three-dimensional deep sub-diffraction optical beam lithography with 9 nm feature size
Open accessAbstract
The current nanofabrication techniques including electron beam lithography provide fabrication resolution in the nanometre range. The major limitation of these techniques is their incapability of arbitrary three-dimensional nanofabrication. This has stimulated the rapid development of far-field three-dimensional optical beam lithography where a laser beam is focused for maskless direct writing. However, the diffraction nature of light is a barrier for achieving nanometre feature and resolution in optical beam lithography. Here we report on three-dimensional optical beam lithography with 9 nm feature size and 52 nm two-line resolution in a newly developed two-photon absorption resin with high mechanical strength. The revealed dependence of the feature size and the two-line resolution confirms that they can reach deep sub-diffraction scale but are limited by the mechanical strength of the new resin. Our result has paved the way towards portable three-dimensional maskless laser direct writing with resolution fully comparable to electron beam lithography.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sensitive measurement of optical nonlinearities using a single beam
Sheik-Bahae, M., Said, A. A., Wei, T.-H., Hagan, D. J., & Van Stryland, E. W. (1990) · IEEE Journal of Quantum Electronics · doi:10.1109/3.53394 · Cited by 9,053
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Five-dimensional optical recording mediated by surface plasmons in gold nanorods
Zijlstra, P., Chon, J. W. M., & Gu, M. (2009) · Nature · doi:10.1038/nature08053 · Cited by 1,234
Self-citationAchieving λ/20 Resolution by One-Color Initiation and Deactivation of Polymerization
Li, L., Gattass, R. R., Gershgoren, E., Hwang, H., & Fourkas, J. T. (2009) · Science · doi:10.1126/science.1168996 · Cited by 524
Advanced Optical Imaging Theory
Gu, M. (2000) · Springer Series in Optical Sciences · doi:10.1007/978-3-540-48471-4 · Cited by 510
Self-citationDiffraction-unlimited all-optical imaging and writing with a photochromic GFP
Grotjohann, T., Testa, I., Leutenegger, M., Bock, H., Urban, N. T., Lavoie-Cardinal, F., Willig, K. I., Eggeling, C., Jakobs, S., & Hell, S. W. (2011) · Nature · doi:10.1038/nature10497 · Cited by 501
Török, P., Varga, P., Laczik, Z., & Booker, G. R. (1995) · Journal of the Optical Society of America A · doi:10.1364/josaa.12.000325 · Cited by 448
Two-Color Single-Photon Photoinitiation and Photoinhibition for Subdiffraction Photolithography
Scott, T. F., Kowalski, B. A., Sullivan, A. C., Bowman, C. N., & McLeod, R. R. (2009) · Science · doi:10.1126/science.1167610 · Cited by 421
A compact STED microscope providing 3D nanoscale resolution
Wildanger, D., Medda, R., Kastrup, L., & Hell, S. W. (2009) · Journal of Microscopy · doi:10.1111/j.1365-2818.2009.03188.x · Cited by 276
Cited by
Laser‐Induced Graphene: From Discovery to Translation
Ye, R., James, D. K., & Tour, J. M. (2019) · Advanced Materials · doi:10.1002/adma.201803621 · Cited by 942
Optical storage arrays: a perspective for future big data storage
Gu, M., Li, X., & Cao, Y. (2014) · Light: Science & Applications · doi:10.1038/lsa.2014.58 · Cited by 542
Self-citationFemtosecond laser three-dimensional micro- and nanofabrication
Sugioka, K., & Cheng, Y. (2014) · Applied Physics Reviews · doi:10.1063/1.4904320 · Cited by 490
Ultrafast laser nanostructuring of photopolymers: a decade of advances
Malinauskas, M., Farsari, M., Piskarskas, A., & Juodkazis, S. (2013) · Physics Reports · doi:10.1016/j.physrep.2013.07.005 · Cited by 431
Nanomaterials for optical data storage
Gu, M., Zhang, Q., & Lamon, S. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.70 · Cited by 402
Self-citationWang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Self-citationSub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres
Gissibl, T., Thiele, S., Herkommer, A., & Giessen, H. (2016) · Nature Communications · doi:10.1038/ncomms11763 · Cited by 359
Femtosecond laser induced phenomena in transparent solid materials: Fundamentals and applications
Tan, D., Sharafudeen, K. N., Yue, Y., & Qiu, J. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.09.002 · Cited by 350
Adaptive optics in laser processing
Salter, P. S., & Booth, M. J. (2019) · Light: Science & Applications · doi:10.1038/s41377-019-0215-1 · Cited by 321
Length scale and manufacturability in density-based topology optimization
Lazarov, B. S., Wang, F., & Sigmund, O. (2016) · Archive of Applied Mechanics · doi:10.1007/s00419-015-1106-4 · Cited by 319
Artificial neural networks enabled by nanophotonics
Zhang, Q., Yu, H., Barbiero, M., Wang, B., & Gu, M. (2019) · Light: Science & Applications · doi:10.1038/s41377-019-0151-0 · Cited by 317
Self-citationPrint Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning
de Beer, M. P., van der Laan, H. L., Cole, M. A., Whelan, R. J., Burns, M. A., & Scott, T. F. (2019) · Science Advances · doi:10.1126/sciadv.aau8723 · Cited by 261
Progress in ultrafast laser processing and future prospects
Sugioka, K. (2017) · Nanophotonics · doi:10.1515/nanoph-2016-0004 · Cited by 260
Functional Materials for Two‐Photon Polymerization in Microfabrication
Carlotti, M., & Mattoli, V. (2019) · Small · doi:10.1002/smll.201902687 · Cited by 260
Harinarayana, V., & Shin, Y. C. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.107180 · Cited by 259
3D-printed silica with nanoscale resolution
Wen, X., Zhang, B., Wang, W., Ye, F., Yue, S., Guo, H., Gao, G., Zhao, Y., Fang, Q., Nguyen, C., et al. (2021) · Nature Materials · doi:10.1038/s41563-021-01111-2 · Cited by 259
Mojarad, N., Hojeij, M., Wang, L., Gobrecht, J., & Ekinci, Y. (2015) · Nanoscale · doi:10.1039/c4nr07420c · Cited by 102
Ultrahigh-printing-speed photoresists for additive manufacturing
Liu, T., Tao, P., Wang, X., Wang, H., He, M., Wang, Q., Cui, H., Wang, J., Tang, Y., Tang, J., et al. (2024) · Nature Nanotechnology · doi:10.1038/s41565-023-01517-w · Cited by 63
Sensors-integrated organ-on-a-chip for biomedical applications
Chen, H., Luo, Z., Lin, X., Zhu, Y., & Zhao, Y. (2023) · Nano Research · doi:10.1007/s12274-023-5651-9 · Cited by 47
Gao, L., Zhang, Q., Evans, R. A., & Gu, M. (2021) · Advanced Optical Materials · doi:10.1002/adom.202100487 · Cited by 28
Self-citation
Metadata
- Authors
- Gan, Z., Cao, Y., Evans, R. A., & Gu, M.
- Venue
- Nature Communications
- Published
- 2013-06-19
- Volume
- 4
- Issue
- 1
- Pages
- 2061-2061
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2123494811
- Cited by
- 563
- References
- 16
- FWCI
- 22.14
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.