The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Combinatorial molecular optimization of cement hydrates
Open accessAbstract
Despite its ubiquitous presence in the built environment, concrete’s molecular-level properties are only recently being explored using experimental and simulation studies. Increasing societal concerns about concrete’s environmental footprint have provided strong motivation to develop new concrete with greater specific stiffness or strength (for structures with less material). Herein, a combinatorial approach is described to optimize properties of cement hydrates. The method entails screening a computationally generated database of atomic structures of calcium-silicate-hydrate, the binding phase of concrete, against a set of three defect attributes: calcium-to-silicon ratio as compositional index and two correlation distances describing medium-range silicon-oxygen and calcium-oxygen environments. Although structural and mechanical properties correlate well with calcium-to-silicon ratio, the cross-correlation between all three defect attributes reveals an indentation modulus-to-hardness ratio extremum, analogous to identifying optimum network connectivity in glass rheology. We also comment on implications of the present findings for a novel route to optimize the nanoscale mechanical properties of cement hydrate. Concrete is a vital material in meeting present day construction demands. Here, the authors report a computational combinatorial approach to understand how molecular level characteristics influence the mechanical properties of cement hydrates, via screening against distinct defect types.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Maximum Likelihood from Incomplete Data Via the EM Algorithm
Dempster, A. P., Laird, N. M., & Rubin, D. B. (1977) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.2517-6161.1977.tb01600.x · Cited by 50,444
Anstis, G. R., Chantikul, P., Lawn, B. R., & Marshall, D. B. (1981) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1981.tb10320.x · Cited by 5,653
(1997) · Emerald Group Publishing Limited eBooks · doi:10.1680/cc.25929 · Cited by 3,151
Topology of covalent non-crystalline solids I: Short-range order in chalcogenide alloys
Phillips, J. C. (1979) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(79)90033-4 · Cited by 1,876
C ARBON D IOXIDE E MISSIONS FROM THE G LOBAL C EMENT I NDUSTRY
Worrell, E., Price, L., Martin, N., Hendriks, C., & Meida, L. O. (2001) · Annual Review of Energy and the Environment · doi:10.1146/annurev.energy.26.1.303 · Cited by 1,488
Richardson, I. G. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.11.005 · Cited by 1,262
Constantinides, G., & Ulm, F.-J. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00230-8 · Cited by 1,226
Self-citationComposition and density of nanoscale calcium–silicate–hydrate in cement
Allen, A. J., Thomas, J. J., & Jennings, H. M. (2007) · Nature Materials · doi:10.1038/nmat1871 · Cited by 1,089
A realistic molecular model of cement hydrates
Pellenq, R. J.-M., Kushima, A., Shahsavari, R., Van Vliet, K. J., Buehler, M. J., Yip, S., & Ulm, F.-J. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0902180106 · Cited by 1,088
Self-citationRichardson, I. G. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.034 · Cited by 1,082
Solubility and structure of calcium silicate hydrate
Chen, J. J., Thomas, J. J., Taylor, H. F. W., & Jennings, H. M. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.04.034 · Cited by 931
Constraint theory, vector percolation and glass formation
Phillips, J. C., & Thorpe, M. F. (1985) · Solid State Communications · doi:10.1016/0038-1098(85)90381-3 · Cited by 723
29Si MAS NMR study of the structure of calcium silicate hydrate
Cong, X., & Kirkpatrick, R. J. (1996) · Advanced Cement Based Materials · doi:10.1016/s1065-7355(96)90046-2 · Cited by 678
Densification of C–S–H Measured by 1H NMR Relaxometry
Muller, A. C. A., Scrivener, K. L., Gajewicz, A. M., & McDonald, P. J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp3102964 · Cited by 515
Manzano, H., Moeini, S., Marinelli, F., van Duin, A. C. T., Ulm, F.-J., & Pellenq, R. J.-M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja209152n · Cited by 347
Self-citationThe crystal structure of the 11Å natural tobermorite Ca2.25[Si3O7.5(OH)1.5] · 1H2O
(1981) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.1981.154.3-4.189 · Cited by 329
Empirical force fields for complex hydrated calcio-silicate layered materials
Shahsavari, R., Pellenq, R. J.-M., & Ulm, F.-J. (2011) · Phys. Chem. Chem. Phys. · doi:10.1039/c0cp00516a · Cited by 313
Self-citationEngineering the bonding scheme in C–S–H: The iono-covalent framework
Pellenq, R. J.-M., Lequeux, N., & van Damme, H. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.09.026 · Cited by 303
Self-citationNanostructure of Calcium Silicate Hydrates in Cements
Skinner, L. B., Chae, S. R., Benmore, C. J., Wenk, H. R., & Monteiro, P. J. M. (2010) · Physical Review Letters · doi:10.1103/physrevlett.104.195502 · Cited by 284
Youssef, M., Pellenq, R. J.-M., & Yildiz, B. (2011) · Journal of the American Chemical Society · doi:10.1021/ja107003a · Cited by 284
Self-citationElastic properties of the main species present in Portland cement pastes
Manzano, H., Dolado, J. S., & Ayuela, A. (2009) · Acta Materialia · doi:10.1016/j.actamat.2008.12.007 · Cited by 277
Muller, A. C. A., Scrivener, K. L., Gajewicz, A. M., & McDonald, P. J. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.01.032 · Cited by 266
Microstructure and microanalysis of hardened ordinary Portland cement pastes
Richardson, I. G., & Groves, G. W. (1993) · Journal of Materials Science · doi:10.1007/bf00349061 · Cited by 254
Shahsavari, R., Buehler, M. J., Pellenq, R. J. ‐., & Ulm, F. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03199.x · Cited by 243
Self-citationNanoporous carbons from hydrothermally treated biomass as anode materials for lithium ion batteries
Unur, E., Brutti, S., Panero, S., & Scrosati, B. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.02.032 · Cited by 226
Hydration of tricalcium silicate in the presence of synthetic calcium–silicate–hydrate
Alizadeh, R., Raki, L., Makar, J. M., Beaudoin, J. J., & Moudrakovski, I. (2009) · Journal of Materials Chemistry · doi:10.1039/b910216g · Cited by 217
Thermodynamics of Water Confined in Porous Calcium-Silicate-Hydrates
Bonnaud, P. A., Ji, Q., Coasne, B., Pellenq, R. J.-M., & Van Vliet, K. J. (2012) · Langmuir · doi:10.1021/la301738p · Cited by 206
Self-citationNanostructure and Nanomechanics of Cement: Polydisperse Colloidal Packing
Masoero, E., Del Gado, E., Pellenq, R. J.-M., Ulm, F.-J., & Yip, S. (2012) · Physical Review Letters · doi:10.1103/physrevlett.109.155503 · Cited by 192
Self-citationA Molecular Dynamic Study of Cementitious Calcium Silicate Hydrate (C–S–H) Gels
Dolado, J. S., Griebel, M., & Hamaekers, J. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01984.x · Cited by 166
Qomi, M. J. A., Bauchy, M., Ulm, F.-J., & Pellenq, R. J.-M. (2014) · The Journal of Chemical Physics · doi:10.1063/1.4864118 · Cited by 153
Self-citationQomi, M. J. A., Ulm, F., & Pellenq, R. J. ‐. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.05058.x · Cited by 152
Self-citationGrangeon, S., Claret, F., Lerouge, C., et al. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.05.007 · Cited by 135
Akgül, Ç. M., Benmore, C. J., & Monteiro, P. J. M. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.027 · Cited by 134
Plassard, C., Lesniewska, É., Pochard, I., & Nonat, A. (2004) · Ultramicroscopy · doi:10.1016/j.ultramic.2003.11.012 · Cited by 132
Ebrahimi, D., Whittle, A. J., & Pellenq, R. J. ‐. (2014) · The Journal of Chemical Physics · doi:10.1063/1.4870932 · Cited by 126
Self-citationOrder and disorder in calcium–silicate–hydrate
Bauchy, M., Qomi, M. J. A., Ulm, F., & Pellenq, R. J. ‐. (2014) · The Journal of Chemical Physics · doi:10.1063/1.4878656 · Cited by 126
Self-citationNanoscale Elastic Properties of Montmorillonite upon Water Adsorption
Ebrahimi, D., Pellenq, R. J. ‐., & Whittle, A. J. (2012) · Langmuir · doi:10.1021/la302997g · Cited by 126
Self-citationThomas, J. J., Chen, J. J., Jennings, H. M., & Neumann, D. A. (2003) · Chemistry of Materials · doi:10.1021/cm034227f · Cited by 114
Compositional Evolution of Calcium Silicate Hydrate ( C–S–H ) Structures by Total X ‐Ray Scattering
Soyer‐Uzun, S., Chae, S. R., Benmore, C. J., Wenk, H. R., & Monteiro, P. J. M. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04989.x · Cited by 110
Nanoscale Structure of Cement: Viewpoint of Rigidity Theory
Bauchy, M., Qomi, M. J. A., Bichara, C., Ulm, F., & Pellenq, R. J. ‐. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp502550z · Cited by 93
Self-citationBonnaud, P., Ji, Q., & Vliet, K. J. V. (2013) · Soft Matter · doi:10.1039/c3sm50975c · Cited by 74
An investigation on the validity of Cauchy–Born hypothesis using Sutton-Chen many-body potential
Khoei, A. R., Qomi, M. J. A., Kazemi, M., & Aghaei, A. (2008) · Computational Materials Science · doi:10.1016/j.commatsci.2008.07.022 · Cited by 44
EXAFS study of Nd(III) uptake by amorphous calcium silicate hydrates (C–S–H)
Mandaliev, P., Dähn, R., Tits, J., Wehrli, B., & Wieland, E. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.06.011 · Cited by 40
Concrete durability and mole ratio of CSH
Chatterji, S. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00085-q · Cited by 18
Cited by
The ReaxFF reactive force-field: development, applications and future directions
Senftle, T. P., Hong, S., Islam, M. M., Kylasa, S. B., Zheng, Y., Shin, Y. K., Junkermeier, C., Engel-Herbert, R., Janik, M. J., Aktulga, H. M., et al. (2016) · npj Computational Materials · doi:10.1038/npjcompumats.2015.11 · Cited by 2,363
Kunther, W., Ferreiro, S., & Skibsted, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06104h · Cited by 440
Bostanabad, R., Zhang, Y., Li, X., Kearney, T., Brinson, L. C., Apley, D. W., Liu, W. K., & Chen, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.005 · Cited by 434
Concrete material science: Past, present, and future innovations
Van Damme, H. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.002 · Cited by 398
Tong, T., Fan, Z., Liu, Q., Wang, S., Tan, S., & Yu, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.092 · Cited by 305
Metadata
- Authors
- Abdolhosseini Qomi, M. J., Krakowiak, K. J., Bauchy, M., Stewart, K. L., Shahsavari, R., Jagannathan, D., Brommer, D. B., Baronnet, A., Buehler, M. J., Yip, S., Ulm, F.-J., Van Vliet, K. J., & Pellenq, R. J. M.
- Venue
- Nature Communications
- Published
- 2014-09-24
- Volume
- 5
- Issue
- 1
- Pages
- 4960-4960
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2160815766
- Cited by
- 571
- References
- 44
- FWCI
- 70.30
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.