Three-dimensional analysis of Nafion layers in fuel cell electrodes
Open accessThe DOI matches its Crossref record; 31 of the 32 references it cites were found in a registry or an index.
Abstract
Proton exchange membrane fuel cell is one of the most promising zero-emission power sources for automotive or stationary applications. However, their cost and lifetime remain the two major key issues for a widespread commercialization. Consequently, much attention has been devoted to optimizing the membrane/electrode assembly that constitute the fuel cell core. The electrodes consist of carbon black supporting Pt nanoparticles and Nafion as the ionomer binder. Although the ionomer plays a crucial role as ionic conductor through the electrode, little is known about its distribution inside the electrode. Here we report the three-dimensional morphology of the Nafion thin layer surrounding the carbon particles, which is imaged using electron tomography. The analyses reveal that doubling the amount of Nafion in the electrode leads to a twofold increase in its degree of coverage of the carbon, while the thickness of the layer, around 7 nm, is unchanged.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The distribution of ionomer in CLs is usually inhomogeneous, in the sense that the coverage of Pt nanoparticles can be categorized as (i) fully covered with a thick ionomer film, (ii) fully covered with a thin ionomer film, (iii) partially covered by ionomer, and (iv) completely uncovered by ionomer [45].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [45]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Alloys of platinum and early transition metals as oxygen reduction electrocatalysts
Greeley, J., Stephens, I. E. L., Bondarenko, A. S., Johansson, T. P., Hansen, H. A., Jaramillo, T. F., Rossmeisl, J., Chorkendorff, I., & Nørskov, J. K. (2009) · Nature Chemistry · doi:10.1038/nchem.367 · Cited by 3,203
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Electron tomography and holography in materials science
Midgley, P. A., & Dunin-Borkowski, R. E. (2009) · Nature Materials · doi:10.1038/nmat2406 · Cited by 883
Chemically sensitive structure-imaging with a scanning transmission electron microscope
Pennycook, S. J., & Boatner, L. A. (1988) · Nature · doi:10.1038/336565a0 · Cited by 735
The effect of three-dimensional morphology on the efficiency of hybrid polymer solar cells
Oosterhout, S. D., Wienk, M. M., van Bavel, S. S., Thiedmann, R., Jan Anton Koster, L., Gilot, J., Loos, J., Schmidt, V., & Janssen, R. A. J. (2009) · Nature Materials · doi:10.1038/nmat2533 · Cited by 531
Electron Tomography for Heterogeneous Catalysts and Related Nanostructured Materials
Friedrich, H., de Jongh, P. E., Verkleij, A. J., & de Jong, K. P. (2009) · Chemical Reviews · doi:10.1021/cr800434t · Cited by 256
Measuring oxygen reduction/evolution reactions on the nanoscale
Kumar, A., Ciucci, F., Morozovska, A. N., Kalinin, S. V., & Jesse, S. (2011) · Nature Chemistry · doi:10.1038/nchem.1112 · Cited by 241
3D Imaging of Catalyst Support Corrosion in Polymer Electrolyte Fuel Cells
Schulenburg, H., Schwanitz, B., Linse, N., Scherer, G. G., Wokaun, A., Krbanjevic, J., Grothausmann, R., & Manke, I. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp203016u · Cited by 229
Research works printed but not linked: 1
- Martin, C. W., Baker, S. H., Gordon, T. D. & Davila, M. Processes for forming thin, durable coatings of cation-containing polymers on selected substrates. US Patent 5.718,947 (1998).
Cited by
Items 201–300 of 435
Gawas, R., Sun, R., Li, Y., Neyerlin, K. C., Elabd, Y. A., Tang, M. H.-M., & Snyder, J. D. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac4375 · Cited by 19
Nafion film transport properties in a low-Pt PEM fuel cell: impedance spectroscopy study
Reshetenko, T. V., & Kulikovsky, A. A. (2019) · RSC Advances · doi:10.1039/c9ra07794d · Cited by 19
Jayawickrama, S. M., & Fujigaya, T. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228932 · Cited by 19
Minami, S., Kajiya, S., Yamada, H., Shinozaki, K., & Jinnouchi, R. (2023) · Electrocatalysis · doi:10.1007/s12678-023-00809-y · Cited by 18
“The distribution of Cs+-stained ionomer for a model catalyst layer without Pt nanoparticles was examined by scanning transmission electron microscopy (STEM) [20], and a nanometer-scale * Saori Minami e1778@mosk.”
MethodResultInfluentialOrigins of Nanoalloy Catalysts Degradation during Membrane Electrode Assembly Fabrication
Ronovský, M., Dunseath, O., Hrbek, T., Kúš, P., Gatalo, M., Polani, S., Kubát, J., Götz, D., Nedumkulam, H., Sartori, A., et al. (2024) · ACS Energy Letters · doi:10.1021/acsenergylett.4c02350 · Cited by 18
Suzuki, T., Okada, S., & Tsushima, S. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abad6a · Cited by 18
Liu, J., Ma, R., Chu, Y., Gao, N., Jin, Z., Ge, J., Liu, C., & Xing, W. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10155 · Cited by 18
Proton-Exchange Membrane Fuel Cells with Low-Pt Content
Kongkanand, A., Gu, W., & Mathias, M. F. (2017) · Springer eBooks · doi:10.1007/978-1-4939-2493-6_1022-1 · Cited by 18
Martinaiou, I., & Daletou, M. K. (2024) · Energies · doi:10.3390/en17143443 · Cited by 17
Yu, H., Bonville, L. J., & Marić, R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0411815jes · Cited by 17
Segmentation of scanning-transmission electron microscopy images using the ordered median problem
Calvino, J. J., López‐Haro, M., Muñoz-Ocaña, J. M., Puerto, J., & Rodríguez-Chía, A. M. (2022) · European Journal of Operational Research · doi:10.1016/j.ejor.2022.01.022 · Cited by 17
A Macroscopically Relevant 3D‐Metrology Approach for Nanocatalysis Research
López‐Haro, M., Tinoco, M., Fernández‐Garcia, S., Chen, X., Hungría, A. B., Cauqui, M. A., & Calvino, J. J. (2017) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201700343 · Cited by 17
Shin, S., Liu, J., Akbar, A., & Um, S. (2019) · Journal of Catalysis · doi:10.1016/j.jcat.2019.07.053 · Cited by 17
Rodríguez, L. G., Campana, R., Sánchez‐Molina, M., & Victoria, T. A. R. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.03.114 · Cited by 17
Zhang, Q., & Wang, B. (2023) · Transactions of Tianjin University · doi:10.1007/s12209-023-00371-0 · Cited by 16
“Lopez-Haro et al. [27] used high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) electron tomography, combined with cesium (Cs) ion labeling, to study the three-dimensional (3D) structure of catalyst–ionomer aggregates (Fig.”
Toudret, P., Chennevière, A., Blachot, J.-F., Gebel, G., Guétaz, L., Heitzmann, M., & Morin, A. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/adc343 · Cited by 16
Self-citationShintani, H., Miyata, N., & Sugawara, Y. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229414 · Cited by 16
Aliyah, K. H., Prehal, C., Diercks, J. S., Diklić, N., Xu, L., Ünsal, S., Appel, C., Pauw, B. R., Smales, G. J., Guizar‐Sicairos, M., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c00420 · Cited by 16
Zhou, Y., Fan, L., Wang, J., Du, Q., & Jiao, K. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta01633e · Cited by 15
Liu, H., Qin, J., Zhang, W., Xu, Q., Bhuvanendran, N., Ren, J., & Su, H. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.163196 · Cited by 15
Managing gas and ion transport in a PTFE fiber-based architecture for alkaline fuel cells
Yan, Z. W., Colletta, M., Venkatesh, A., Yang, Y., Hitt, J. L., McNeill, J. M., Kourkoutis, L. F., Abruña, H. D., & Mallouk, T. E. (2022) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2022.100912 · Cited by 15
Kakinuma, K., Kawamoto, M., Tamoto, K., Yamaguchi, M., Honmura, S., Iiyama, A., & Uchida, M. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abfa59 · Cited by 15
Investigation of Gas Transport Properties of PEMFC Catalyst Layers Using a Microfluidic Device
Suzuki, T., Nakata, Y., Tsutsui, F., & Tsushima, S. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abaf28 · Cited by 15
Sun, D., Wang, Z., Jin, M., Liu, J., Zhang, X., Zhang, S., & Zhang, H. (2024) · ACS Applied Energy Materials · doi:10.1021/acsaem.4c00463 · Cited by 14
RETRACTED: A review on progress in the field of conditioning of polymer fuel cell stacks
Moghaddam, M. S., Bahari, A., Houshani, M., Jafari, A., & Tapeh, S. M. T. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235300 · Cited by 14
RetractedNguyen, V. L., Permatasari, A., So, M., Yano, T., & Inoue, G. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237421 · Cited by 14
Yoshimune, W. (2022) · Results in Chemistry · doi:10.1016/j.rechem.2022.100738 · Cited by 14
“…and the inhomogeneous ionomer shell layer H + ); (E) total gas resistance ( R tot ) as a plot of absolute gas pressure ( P abs ); (F) molecular diffusion resistance ( R mole ) and pressure-independent resistance ( R other ) at a gauge gas pressure of 50 kPa. thickness ( l dry ) is ~ 7 nm [19].”
Lenne, Q., Mattiuzzi, A., Jabin, I., Troian‐Gautier, L., Hamon, J., Leroux, Y. R., & Lagrost, C. (2023) · ChemSusChem · doi:10.1002/cssc.202201990 · Cited by 14
A novel approach to identify the ionomer phase in PEMFC by EELS
Kang, Y., Hart, J. L., Xie, J., Taheri, M. L., & Ferreira, P. J. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.108393 · Cited by 14
Kumar, K. U., Bhat, S. D., & Subrahmanyam, A. (2019) · Materials Research Express · doi:10.1088/2053-1591/aafef1 · Cited by 14
Electron beam damage of perfluorosulfonic acid studied by soft X-ray spectromicroscopy
Melo, L. G. A., & Hitchcock, A. P. (2019) · Micron · doi:10.1016/j.micron.2019.02.006 · Cited by 14
Su, K., Yao, X., Sui, S., Wei, Z., Zhang, J., & Du, S. (2015) · Fuel Cells · doi:10.1002/fuce.201400168 · Cited by 14
Secanell, M., Jarauta, A., Kosakian, A., Sabharwal, M., & Zhou, J. (2018) · Springer eBooks · doi:10.1007/978-1-4939-7789-5_1019 · Cited by 14
Cui, R., Zhang, Z., Yu, C., & Zhou, Y. (2024) · Journal of Membrane Science · doi:10.1016/j.memsci.2024.122904 · Cited by 13
High Proton Conductivity of Acid Impregnated COFs Stabilized by Post‐Oxidation
Meng, C., Zhao, Y., Zhu, W., & Ben, T. (2024) · Small · doi:10.1002/smll.202409238 · Cited by 13
Pedram, S., Batool, M., Wang, Y., Bonville, L. J., & Janković, J. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2025.145841 · Cited by 13
Sustainable Conversion of PET Waste Bottle into Proton Exchange Membranes for Fuel Cells
Neelalochana, V. D., Mancini, I., Loi, N., Cufalo, G., D’Anzi, A., Scardi, P., & Ataollahi, N. (2025) · ACS Applied Energy Materials · doi:10.1021/acsaem.4c03313 · Cited by 13
Zhang, L., Wang, J. C., Song, Y., Zheng, W., Li, B., Zhang, C., & Ming, P. (2026) · Advanced Energy Materials · doi:10.1002/aenm.202504621 · Cited by 13
Harada, M., Kadoura, H., Takata, S.-I., Iwase, H., Kajiya, S., Suzuki, T., Hasegawa, N., Shinohara, A., & Kato, S. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c08432 · Cited by 13
Porous Carbon‐Supported Catalysts for Proton Exchange Membrane Fuel Cells
Song, P., Chen, J., Yin, Z., Yang, Z., & Wang, L. (2024) · ChemCatChem · doi:10.1002/cctc.202401441 · Cited by 13
Kazancioglu, M., Tsilomelekis, G., Lehman, R., & Hara, M. (2021) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2021.120757 · Cited by 13
Li, X., Fan, L., Gong, Z., Xing, L., Xuan, J., Bao, Z., Wu, S., Wang, Y., Zuo, R., & Jiao, K. (2025) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2025.102557 · Cited by 12
Effect of Ionomer-to-Carbon Ratio on PEMFC Carbon Corrosion: An Electrochemical Study
Raab, S., Karmakar, A., Chuang, P. A., & Weber, A. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae1b3d · Cited by 12
Insights on the Electrochemical Oxidation of Ordered Mesoporous Carbons
Pérez-Rodríguez, S., Sebastián, D., & Lázaro, M. J. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab6a8f · Cited by 12
Harada, M., Kajiya, S., Mitsuoka, T., Takata, S.-I., Iwase, H., & Aoki, H. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.131183 · Cited by 12
Chowdury, M. S. K., Park, Y. J., Park, S. B., & Park, Y.-I. (2024) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2024.124629 · Cited by 12
Shin, S., Liu, J., Akbar, A., & Um, S. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227953 · Cited by 12
Alink, R., Schüßler, M., Pospischil, M., Erath, D., & Gerteisen, D. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.084 · Cited by 12
The 3D secrets of fuel cell catalyst layers
Janković, J. (2023) · Nature Catalysis · doi:10.1038/s41929-023-00960-1 · Cited by 12
Devivaraprasad, R., & Masuda, T. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02023 · Cited by 11
Ahmed-Maloum, M., David, T., Guétaz, L., Morin, A., Pauchet, J., Quintard, M., & Prat, M. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.07.097 · Cited by 11
Self-citationLafforgue, C., Toudret, P., Micoud, F., Heitzmann, M., Blachot, J.-F., & Chatenet, M. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235851 · Cited by 11
Unravelling complex mechanisms in materials processes with cryogenic electron microscopy
Lee, M., Jeon, Y., Kim, S., Jung, I., Kang, S., Jeong, S., & Park, J. (2024) · Chemical Science · doi:10.1039/d4sc05188b · Cited by 11
Li, X., Zheng, W., Yang, Y., Fan, R., Wang, Q., Zhang, J., Qian, D., Li, B., & Ming, P. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.126559 · Cited by 11
Kariuki, N. N., Haug, A. T., Park, J. W., Lindell, M. J., & Myers, D. J. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac94a4 · Cited by 11
Investigating Electrode‐Ionomer Interface Phenomena for Electrochemical Energy Applications
Jo, S. Y., Kim, H.-J., Park, H., Ahn, C., & Chung, D. Y. (2023) · Chemistry - An Asian Journal · doi:10.1002/asia.202301016 · Cited by 11
Zhang, S., Zhou, F., Luo, B., Tan, J., & Pan, M. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c00197 · Cited by 11
Ahmed-Maloum, M., Pauchet, J., Michel Quintard, A., & Prat, M. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.07.010 · Cited by 11
Aochi, J., Mabuchi, T., & Tokumasu, T. (2016) · Journal of Thermal Science and Technology · doi:10.1299/jtst.2016jtst0045 · Cited by 11
“The film thickness ranged from 4 to 300 nm, which included the observed thickness range in CLs (4–10 nm) (Lopez-Haro et al., 2014).”
BackgroundIonomer Thin Films in PEM Fuel Cells
Kusoglu, A. (2018) · Springer eBooks · doi:10.1007/978-1-4939-7789-5_1021 · Cited by 11
Carbon-based supports for the electrocatalysis under industrially relevant conditions
Yang, X., Gu, X., Song, Y., Hou, G., Wang, C., Liu, L., & Lin, W. S. (2023) · Science China Chemistry · doi:10.1007/s11426-023-1887-7 · Cited by 10
Three-Dimensional Morphology of Polymeric Membranes from Electron Tomography
Ghasemi, M., Geitner, M., O’Connell, A. M., & Gomez, E. D. (2024) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-100722-104623 · Cited by 10
Klingele, M., Moroni, R., Vierrath, S., & Thiele, S. (2017) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4037244 · Cited by 10
Yoshimune, W., Harada, M., & Akimoto, Y. (2020) · Composites Part C Open Access · doi:10.1016/j.jcomc.2020.100015 · Cited by 10
Engineering mesoporosity promoting high-performance polymer electrolyte fuel cells
Wan, H., Yao, Y., Liu, J., You, Y., Li, X., Shao, K., & Zou, Z. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.06.220 · Cited by 10
Highly robust nanostructured carbon films by thermal reconfiguration of ionomer binding
Pyo, J., Kim, J. H., & Kim, T. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta07861a · Cited by 10
Secanell, M., Jarauta, A., Kosakian, A., Sabharwal, M., & Zhou, J. (2017) · Springer eBooks · doi:10.1007/978-1-4939-2493-6_1019-1 · Cited by 10
Eskandari, H., Kollath, V. O., & Karan, K. (2022) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.2c05629 · Cited by 9
Effects of liquid water on transport in the catalyst layer of proton exchange membrane fuel cells
Min, T., & Zhou, Q. (2023) · Frontiers in Energy Research · doi:10.3389/fenrg.2023.1330124 · Cited by 9
Interplay of α/β-Relaxation Dynamics and the Shape of Ionomer Building Blocks
de Matos, B. R., Politano, R., Rey, J. F. Q., Hermida‐Merino, D., Schade, U., Puškar, L., & Fonseca, F. C. C. (2018) · Scientific Reports · doi:10.1038/s41598-018-31368-8 · Cited by 9
Design of Interfaces and Phase Interfaces on Cathode Catalysts for Polymer Electrolyte Fuel Cells
Inoue, G., & Takenaka, S. (2020) · Chemistry Letters · doi:10.1246/cl.200649 · Cited by 9
Choi, W. Y., Seo, D. J., Choi, H., Lee, M. H., Choi, S. W., Yoon, Y., Kim, T. Y., Kim, H., & Jung, C. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.140427 · Cited by 9
(Plenary) Doing More with Less: Challenges for Catalyst Layer Design
Putz, A. M. V., Susac, D., Berejnov, V., Wu, J., Hitchcock, A. P., & Stumper, J. (2016) · ECS Transactions · doi:10.1149/07514.0003ecst · Cited by 9
Choi, S., Sharma, P. P., Shah, S. A., Singh, R., Kim, D., & Jin, K. S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c01013 · Cited by 9
Jo, S., Yoon, K. R., Lim, Y., Kwon, T., Kang, Y. S., Sohn, H., Choi, S. H., Son, H. J., Kwon, S. H., Lee, S. G., et al. (2021) · Small Methods · doi:10.1002/smtd.202100285 · Cited by 9
Designing Anion-Exchange Ionomers with Oriented Nanoscale Phase Separation at a Silver Interface
Buggy, N. C., Du, Y., Kuo, M., Seifert, S., Gasvoda, R. J., Agarwal, S., Coughlin, E. B., & Herring, A. M. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c06036 · Cited by 9
Ohira, A., & Kuroda, S. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.031 · Cited by 9
Li, S., Pei, S., Sun, E., Liu, Z., Zhang, J., Li, J., Chen, H., Liang, H., Xiang, Z., Wang, M., et al. (2025) · Carbon Energy · doi:10.1002/cey2.70080 · Cited by 8
Hyun, J., Yang, S. H., Doo, G., Lee, D. W., Oh, E., Cha, M. S., Lee, J. Y., & Kim, H. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad0a7e · Cited by 8
Eppler, M., Hanauer, M., Berner, U., Leduc, V., Kadyk, T., & Eikerling, M. H. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/add182 · Cited by 8
Hamlyn, R. C. E., Mahl, J., Zhang, X., English, D., McAfee, T. R., & Crumlin, E. J. (2025) · Journal of Materials Chemistry A · doi:10.1039/d4ta07085b · Cited by 8
Saraswat, A., & Kumar, S. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05949-3 · Cited by 8
“Membrane electrode assemblies (MEAs) are an essential part of PEMFCs and are vital to their operation [156].”
Microstructural observation of the swollen catalyst layers of fuel cells by cryo-TEM
Shimanuki, J., Imai, H., Ito, Y., Nishino, Y., & Miyazawa, A. (2022) · Microscopy · doi:10.1093/jmicro/dfac059 · Cited by 8
Electronic Structure of a Polybenzimidazole-Wrapped Single-Wall Carbon Nanotube
Ghuman, K. K., & Fujigaya, T. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b00247 · Cited by 8
Manzi-Orezzoli, V., Siegwart, M., Scheuble, D., Schmidt, T. J., & Boillat, P. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab8290 · Cited by 8
Selective Distributing Features of PFSA Ionomer on Pt/C in PEMFC
Zhou, F., Wang, R., Guan, S., Zhang, H., Wang, Y., Li, G., & Pan, M. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/aca0c5 · Cited by 8
Yoshimoto, S., Hosomi, H., TAKAI, Y., & Ito, K. (2017) · KOBUNSHI RONBUNSHU · doi:10.1295/koron.2016-0051 · Cited by 8
Protic Imidazolium Polymer as Ion Conductor for Improved Oxygen Evolution Performance
Zhang, F., Yang, M., Zhang, S., & Fang, P. (2019) · Polymers · doi:10.3390/polym11081268 · Cited by 8
“The introduced PFSA ionomers are generally covered on the surface of catalysts through electrostatic interactions, forming an ion-conductive layer [17,18].”
BackgroundKazancioglu, M., Lehman, R., & Hara, M. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101058 · Cited by 8
Ionomer Thin Films in PEM Fuel Cells
Kusoglu, A. (2018) · Springer eBooks · doi:10.1007/978-1-4939-2493-6_1021-2 · Cited by 8
Grzonka, J., Marqueses-Rodríguez, J., Fernández‐Garcia, S., Chen, X., Calvino, J. J., & López‐Haro, M. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202200231 · Cited by 7
Ahmed-Maloum, M., Michel Quintard, A., & Prat, M. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.07.096 · Cited by 7
Deng, H., Liu, J., & Hou, Z.-J. (2025) · Journal of Electrochemistry · doi:10.61558/2993-074x.3546 · Cited by 7
Sun, X., Yu, H., Gao, X., & Shao, Z. (2021) · Catalysis Science & Technology · doi:10.1039/d1cy00882j · Cited by 7
Model of catalyst layers for proton exchange membrane fuel cells: Progress and perspective
Hao, M., Li, Y., & He, Y. (2022) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/tb-2022-0002 · Cited by 7
Highly efficient cathodes with low platinum loading for PEMFCs via the use of a modified substrate
Martinaiou, I., Paloukis, F., & Daletou, M. K. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.144853 · Cited by 7
Nitrogen-Mediated Graphene Oxide Enables Highly Efficient Proton Transfer
Chai, G., Shevlin, S. A., & Guo, Z. (2017) · Scientific Reports · doi:10.1038/s41598-017-05570-z · Cited by 7
Intrinsic swelling behavior of free-standing nanoporous ionomer-bound carbon films
Pyo, J., Lee, S., & Kim, T. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107241 · Cited by 7
Feng, Q., Wang, X., Klingenhof, M., Heggen, M., & Strasser, P. (2022) · Angewandte Chemie · doi:10.1002/ange.202203728 · Cited by 7
Dowd, R. P., Li, Y., & Nguyen, T. V. (2020) · Journal of Applied Electrochemistry · doi:10.1007/s10800-020-01453-w · Cited by 7
Metadata
- Authors
- Lopez-Haro, M., Guétaz, L., Printemps, T., Morin, A., Escribano, S., Jouneau, P.-H., Bayle-Guillemaud, P., Chandezon, F., & Gebel, G.
- Affiliations
- Commissariat à l'Énergie Atomique et aux Énergies Alternatives (FR)
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Chandezon, F.
- Gebel, G.
- Venue
- Nature Communications
- Published
- 2014-10-30
- Volume
- 5
- Issue
- 1
- Pages
- 5229-5229
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2082971848
- Cited by
- 402
- References
- 32
- Citations by year
- 2026: 18 · 2025: 52 · 2024: 42 · 2023: 43 · 2022: 37 · 2021: 40 · 2020: 44 · 2019: 35 · 2018: 34 · 2017: 26 · 2016: 21 · 2015: 10
- FWCI
- 10.10
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Nature Communications (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- Ministerio de Educación, Cultura y Deporte (EX2010-1135)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Structural Biology › Advanced Electron Microscopy Techniques and Applications
- Keywords
- proton exchange membrane fuel cells, Nafion, ionomer distribution, fuel cell electrodes, three-dimensional morphology, electron tomography, carbon black, platinum nanoparticles, membrane electrode assembly
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.