CoChat

Flexible suspended gate organic thin-film transistors for ultra-sensitive pressure detection

Open access

The DOI matches its Crossref record; 43 of the 44 references it cites were found in a registry or an index.

Abstract

The utilization of organic devices as pressure-sensing elements in artificial intelligence and healthcare applications represents a fascinating opportunity for the next-generation electronic products. To satisfy the critical requirements of these promising applications, the low-cost construction of large-area ultra-sensitive organic pressure devices with outstanding flexibility is highly desired. Here we present flexible suspended gate organic thin-film transistors (SGOTFTs) as a model platform that enables ultra-sensitive pressure detection. More importantly, the unique device geometry of SGOTFTs allows the fine-tuning of their sensitivity by the suspended gate. An unprecedented sensitivity of 192 kPa−1, a low limit-of-detection pressure of <0.5 Pa and a short response time of 10 ms were successfully realized, allowing the real-time detection of acoustic waves. These excellent sensing properties of SGOTFTs, together with their advantages of facile large-area fabrication and versatility in detecting various pressure signals, make SGOTFTs a powerful strategy for spatial pressure mapping in practical applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/ncomms7269

Cites

43 of 43 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Suspended gate organic thin-film transistor pressure sensors. Schematic illustration of (a) the experimental set-up, (b) a SGOTFT-based array with magnified device geometry and (c) (d) pressure-sensing process. (e) Photograph of a SGOTFT; scale bar, 1 mm. (f) Electrical equivalent circuit of the SGOTFT. Output curves of the SGOTFT taken at a pressure of (g) 0 and (h) 1,000 Pa.
Figure 1 Suspended gate organic thin-film transistor pressure sensors. Schematic illustration of (a) the experimental set-up, (b) a SGOTFT-based array with magnified device geometry and (c) (d) pressure-sensing process. (e) Photograph of a SGOTFT; scale bar, 1 mm. (f) Electrical equivalent circuit of the SGOTFT. Output curves of the SGOTFT taken at a pressure of (g) 0 and (h) 1,000 Pa.CC BY · PubMed Central
Figure 2 Fundamental electric response and performance data for the SGOTFTs. (a) Transfer and (b) output curves of a SGOTFT sensor taken at different applied pressures. (c) Current response of a SGOTFT to the pressure of 3 Pa. (d) Pressure response of the source-drain current at constant voltage VDS=−60 V and VGS=−60 V. The error bars represent 1 s.d. (e) Oscilloscope recorded time-resolved response of a SGOTFT to a pressure of 1,000 Pa. The inset shows the electrical equivalent circuit of the measurement system. The response and relaxation time are lower than 10 ms. (f) The durability test of a SGOTFT under a pressure of 1,000 Pa.
Figure 2 Fundamental electric response and performance data for the SGOTFTs. (a) Transfer and (b) output curves of a SGOTFT sensor taken at different applied pressures. (c) Current response of a SGOTFT to the pressure of 3 Pa. (d) Pressure response of the source-drain current at constant voltage VDS=−60 V and VGS=−60 V. The error bars represent 1 s.d. (e) Oscilloscope recorded time-resolved response of a SGOTFT to a pressure of 1,000 Pa. The inset shows the electrical equivalent circuit of the measurement system. The response and relaxation time are lower than 10 ms. (f) The durability test of a SGOTFT under a pressure of 1,000 Pa.CC BY · PubMed Central
Figure 3 Tunable pressure-sensing performance. Pressure sensitivity of the (a) stainless steel gate and (b) PET/ITO gate-based SGOTFTs, respectively, at constant VDS=−60 V and VGS=−60 V. The error bars represent 1 s.d.
Figure 3 Tunable pressure-sensing performance. Pressure sensitivity of the (a) stainless steel gate and (b) PET/ITO gate-based SGOTFTs, respectively, at constant VDS=−60 V and VGS=−60 V. The error bars represent 1 s.d.CC BY · PubMed Central
Figure 4 The SGOTFT in acoustic wave detection. (a) Schematic illustration of device geometry for ultra-sensitive detection of acoustic wave. (b) Response of a sensor, integrated with 4 μm photoresist and 10 μm Al foil suspended gate, to the acoustic wave with a fixed frequency of 5 kHz. (c) Sound pressure sensitivity of SGOTFT. The error bars represent 1 s.d. (d) Electric signal response of a sensor to the same music for two times.
Figure 4 The SGOTFT in acoustic wave detection. (a) Schematic illustration of device geometry for ultra-sensitive detection of acoustic wave. (b) Response of a sensor, integrated with 4 μm photoresist and 10 μm Al foil suspended gate, to the acoustic wave with a fixed frequency of 5 kHz. (c) Sound pressure sensitivity of SGOTFT. The error bars represent 1 s.d. (d) Electric signal response of a sensor to the same music for two times.CC BY · PubMed Central
Figure 5 Pulse wave measurement. (a) Pressure sensitivity of the SGOTFT device under different VGS. The error bars represent 1 s.d. (b) Photograph of battery-powered SGOTFT attached to the artery of the wrist. (c) The signal curves of real-time pulse wave under different voltages. (d) A magnified curve of average pulse wave signal from five devices (separate measurement): P1, P2 and diastolic wave are observed clearly.
Figure 5 Pulse wave measurement. (a) Pressure sensitivity of the SGOTFT device under different VGS. The error bars represent 1 s.d. (b) Photograph of battery-powered SGOTFT attached to the artery of the wrist. (c) The signal curves of real-time pulse wave under different voltages. (d) A magnified curve of average pulse wave signal from five devices (separate measurement): P1, P2 and diastolic wave are observed clearly.CC BY · PubMed Central
Figure 6 Photographs and performances of SGOTFT pressure-sensing array. (a) Circuit schematic of the pressure-sensing array. (b) A photograph and (c) resulting current mapping of a flexible 8 × 8 pressure-sensing array to the subtle touches, the array with a total area of 6 × 6 cm2 and each pixel has an area of ~2.5 mm2; scale bar, 5 cm. Schematic illustrations of (d–f) corresponding current mappings (h–j) a ball (80 mg) moving along different paths. Illustration image (g) and corresponding current response (k) to the back and forth movement of the ball on s single device. The inset shows the magnified response signal.
Figure 6 Photographs and performances of SGOTFT pressure-sensing array. (a) Circuit schematic of the pressure-sensing array. (b) A photograph and (c) resulting current mapping of a flexible 8 × 8 pressure-sensing array to the subtle touches, the array with a total area of 6 × 6 cm2 and each pixel has an area of ~2.5 mm2; scale bar, 5 cm. Schematic illustrations of (d–f) corresponding current mappings (h–j) a ball (80 mg) moving along different paths. Illustration image (g) and corresponding current response (k) to the back and forth movement of the ball on s single device. The inset shows the magnified response signal.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 43 references

Cited by

See all 549

Metadata

Authors
Zang, Y., Zhang, F., Huang, D., Gao, X., Di, C.-A., & Zhu, D.
Affiliations
Chinese Academy of Sciences (CN)
Corresponding author
  • Di, Chong-an
  • Zhu, Daoben
Venue
Nature Communications
Published
2015-03-03
Volume
6
Issue
1
Pages
6269-6269
ISSN
2041-1723 (ISSN-L)
OpenAlex
W1982276321
Cited by
548
References
44
Citations by year
2026: 15 · 2025: 24 · 2024: 29 · 2023: 44 · 2022: 48 · 2021: 47 · 2020: 64 · 2019: 80 · 2018: 72 · 2017: 59 · 2016: 49 · 2015: 17
FWCI
32.63
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
Funders
Chinese Academy of Sciences (XDB12010000)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
Keywords
flexible electronics, pressure sensitivity, detection limit, acoustic wave detection, large-area fabrication, wearable sensors
MeSH terms
Artificial Intelligence, Blood Pressure, Equipment Design, Humans, Pressure, Sound, Transistors, Electronic, Biosensing Techniques, Limit of Detection

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.