The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
High-performance green flexible electronics based on biodegradable cellulose nanofibril paper
Open accessAbstract
Today’s consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
E-waste: An assessment of global production and environmental impacts
Robinson, B. H. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.09.044 · Cited by 1,777
Tobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
A Physically Transient Form of Silicon Electronics
Hwang, S.-W., Tao, H., Kim, D.-H., Cheng, H., Song, J.-K., Rill, E., Brenckle, M. A., Panilaitis, B., Won, S. M., Kim, Y.-S., et al. (2012) · Science · doi:10.1126/science.1226325 · Cited by 1,286
Optically Transparent Nanofiber Paper
Nogi, M., Iwamoto, S., Nakagaito, A. N., & Yano, H. (2009) · Advanced Materials · doi:10.1002/adma.200803174 · Cited by 1,074
Gu, J.-D. (2003) · International Biodeterioration & Biodegradation · doi:10.1016/s0964-8305(02)00177-4 · Cited by 819
Saito, T., Hirota, M., Tamura, N., Kimura, S., Fukuzumi, H., Heux, L., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm900414t · Cited by 807
Transparent paper: fabrications, properties, and device applications
Zhu, H., Fang, Z., Preston, C., Li, Y., & Hu, L. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43024c · Cited by 550
Nogi, M., & Yano, H. (2008) · Advanced Materials · doi:10.1002/adma.200702559 · Cited by 512
Highly Thermally Conductive Papers with Percolative Layered Boron Nitride Nanosheets
Zhu, H., Li, Y., Fang, Z., Xu, J., Cao, F., Wan, J., Preston, C., Yang, B., & Hu, L. (2014) · ACS Nano · doi:10.1021/nn500134m · Cited by 493
Novel Nanostructured Paper with Ultrahigh Transparency and Ultrahigh Haze for Solar Cells
Fang, Z., Zhu, H., Yuan, Y., Ha, D., Zhu, S., Preston, C., Chen, Q., Li, Y., Han, X., Lee, S., et al. (2014) · Nano Letters · doi:10.1021/nl404101p · Cited by 489
Highly Transparent and Flexible Nanopaper Transistors
Huang, J., Zhu, H., Chen, Y., Preston, C., Rohrbach, K., Cumings, J., & Hu, L. (2013) · ACS Nano · doi:10.1021/nn304407r · Cited by 448
Eder, F., Klauk, H., Halik, M., Zschieschang, U., Schmid, G., & Dehm, C. (2004) · Applied Physics Letters · doi:10.1063/1.1690870 · Cited by 362
Recyclable organic solar cells on cellulose nanocrystal substrates
Zhou, Y., Fuentes-Hernandez, C., Khan, T. M., Liu, J.-C., Hsu, J., Shim, J. W., Dindar, A., Youngblood, J. P., Moon, R. J., & Kippelen, B. (2013) · Scientific Reports · doi:10.1038/srep01536 · Cited by 359
Cellulose nanofiber–graphene all solid-state flexible supercapacitors
Gao, K., Shao, Z., Li, J., Wang, X., Peng, X., Wang, W., & Wang, F. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00386d · Cited by 358
Materials, Designs, and Operational Characteristics for Fully Biodegradable Primary Batteries
Yin, L., Huang, X., Xu, H., Zhang, Y., Lam, J., Cheng, J., & Rogers, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201306304 · Cited by 336
Biodegradable transparent substrates for flexible organic-light-emitting diodes
Zhu, H., Xiao, Z., Liu, D., Li, Y., Weadock, N. J., Fang, Z., Huang, J., & Hu, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40492g · Cited by 323
Chun, S.-J., Choi, E.-S., Lee, E.-H., Kim, J. H., Lee, S.-Y., & Lee, S.-Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32415f · Cited by 322
The economics of cell phone reuse and recycling
Geyer, R., & Doctori Blass, V. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2228-z · Cited by 318
Materials and Fabrication Processes for Transient and Bioresorbable High‐Performance Electronics
Hwang, S., Kim, D., Tao, H., Kim, T., Kim, S., Yu, K. J., Panilaitis, B., Jeong, J., Song, J., Omenetto, F. G., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300127 · Cited by 256
Excellent Thermal Conductivity of Transparent Cellulose Nanofiber/Epoxy Resin Nanocomposites
Shimazaki, Y., Miyazaki, Y., Takezawa, Y., Nogi, M., Abe, K., Ifuku, S., & Yano, H. (2007) · Biomacromolecules · doi:10.1021/bm7004998 · Cited by 224
Materials for Bioresorbable Radio Frequency Electronics
Hwang, S., Huang, X., Seo, J., Song, J., Kim, S., Hage‐Ali, S., Chung, H., Tao, H., Omenetto, F. G., Ma, Z., et al. (2013) · Advanced Materials · doi:10.1002/adma.201300920 · Cited by 210
Self-citationEnvironmentally degradable, high-performance thermoplastics from phenolic phytomonomers
Kaneko, T., Thi, T. H., Shi, D. J., & Akashi, M. (2006) · Nature Materials · doi:10.1038/nmat1778 · Cited by 208
Thermal Conductivity of GaAs and GaAs1− x P x Laser Semiconductors
Carlson, R. O., Slack, G. A., & Silverman, S. J. (1965) · Journal of Applied Physics · doi:10.1063/1.1714018 · Cited by 166
Cellulose Nanofiber Paper as an Ultra Flexible Nonvolatile Memory
Nagashima, K., Koga, H., Celano, U., Zhuge, F., Kanai, M., Rahong, S., Meng, G., He, Y. J., Boeck, J. D., Jurczak, M., et al. (2014) · Scientific Reports · doi:10.1038/srep05532 · Cited by 147
Webb, D. R., Wilson, S. E., & Carter, D. E. (1986) · Toxicology and Applied Pharmacology · doi:10.1016/0041-008x(86)90276-0 · Cited by 140
Arsenic in Drinking Water—A Global Environmental Problem
Wang, J. S., & Wai, C. M. (2004) · Journal of Chemical Education · doi:10.1021/ed081p207 · Cited by 105
Liu, Q., Cao, J., Li, K. Q., Miao, X. H., Li, G., Fan, F. Y., & Zhao, Y. C. (2008) · Environmental Science and Pollution Research · doi:10.1007/s11356-008-0087-z · Cited by 96
RCRA Toxicity Characterization of Discarded Electronic Devices
Musson, S. E., Vann, K. N., Jang, Y.-C., et al. (2006) · Environmental Science & Technology · doi:10.1021/es051557n · Cited by 91
Chung, H., Kim, T., Kim, H., Wells, S. A., Jo, S., Ahmed, N., Jung, Y. H., Won, S. M., Bower, C. A., & Rogers, J. A. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100124 · Cited by 67
Self-citationFlexible Vertical Light Emitting Diodes
Kim, R.-H., Kim, S. E., Song, Y. M., Jeong, H., Kim, T., Lee, J., Li, X., Choquette, K. D., & Rogers, J. A. (2012) · Small · doi:10.1002/smll.201201195 · Cited by 59
Self-citationKim, T., Jung, Y. H., Chung, H., Yu, K. J., Ahmed, N., Corcoran, C. J., Park, J. S., Jin, S. H., & Rogers, J. A. (2013) · Applied Physics Letters · doi:10.1063/1.4804139 · Cited by 48
Self-citationThin Film Receiver Materials for Deterministic Assembly by Transfer Printing
Kim, T., Kim, M. J., Jung, Y. H., Jang, H., Dağdeviren, C., Pao, H. A., Cho, S. J., Carlson, A., Yu, K. J., Ameen, A., et al. (2014) · Chemistry of Materials · doi:10.1021/cm501002b · Cited by 44
Self-citationGreen Consumption and Social Change: Debates over Responsibility, Private Action, and Access
Lorenzen, J. A. (2014) · Sociology Compass · doi:10.1111/soc4.12198 · Cited by 38
Cited by
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
Developing fibrillated cellulose as a sustainable technological material
Li, T., Chen, C., Brozena, A. H., Zhu, J. Y., Xu, L., Driemeier, C., Dai, J., Rojas, O. J., Isogai, A., Wågberg, L., et al. (2021) · Nature · doi:10.1038/s41586-020-03167-7 · Cited by 1,674
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Plasmonic Wood for High‐Efficiency Solar Steam Generation
Zhu, M., Li, Y., Chen, F., Zhu, X., Dai, J., Li, Y., Yang, Z., Yan, X., Song, J., Wang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701028 · Cited by 937
A strong, biodegradable and recyclable lignocellulosic bioplastic
Xia, Q., Chen, C., Yao, Y., Li, J., He, S., Zhou, Y., Li, T., Pan, X., Yao, Y., & Hu, L. (2021) · Nature Sustainability · doi:10.1038/s41893-021-00702-w · Cited by 759
Metadata
- Authors
- Jung, Y. H., Chang, T.-H., Zhang, H., Yao, C., Zheng, Q., Yang, V. W., Mi, H., Kim, M., Cho, S. J., Park, D.-W., Jiang, H., Lee, J., Qiu, Y., Zhou, W., Cai, Z., Gong, S., & Ma, Z.
- Venue
- Nature Communications
- Published
- 2015-05-26
- Volume
- 6
- Issue
- 1
- Pages
- 7170-7170
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2271692482
- Cited by
- 891
- References
- 33
- FWCI
- 28.13
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
