The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Strong, tough and stiff bioinspired ceramics from brittle constituents
Open accessAbstract
High strength and high toughness are usually mutually exclusive in engineering materials. In ceramics, improving toughness usually relies on the introduction of a metallic or polymeric ductile phase, but this decreases the material's strength and stiffness as well as its high-temperature stability. Although natural materials that are both strong and tough rely on a combination of mechanisms operating at different length scales, the relevant structures have been extremely difficult to replicate. Here, we report a bioinspired approach based on widespread ceramic processing techniques for the fabrication of bulk ceramics without a ductile phase and with a unique combination of high strength (470 MPa), high toughness (22 MPa m(1/2)), and high stiffness (290 GPa). Because only mineral constituents are needed, these ceramics retain their mechanical properties at high temperatures (600 °C). Our bioinspired, material-independent approach should find uses in the design and processing of materials for structural, transportation and energy-related applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Crack deflection processes—I. Theory
Faber, K. T., & Evans, A. G. (1983) · Acta Metallurgica · doi:10.1016/0001-6160(83)90046-9 · Cited by 1,444
Structural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
Materials selection in mechanical design
ASHBY, M. F., & CEBON, D. (1993) · Le Journal de Physique IV · doi:10.1051/jp4:1993701 · Cited by 1,097
Effect of Change of Scale on Sintering Phenomena
Herring, C. (1950) · Journal of Applied Physics · doi:10.1063/1.1699658 · Cited by 1,045
On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure
BARTHELAT, F., TANG, H., ZAVATTIERI, P., LI, C., & ESPINOSA, H. (2007) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.07.007 · Cited by 1,032
Bioinspired Design and Assembly of Platelet Reinforced Polymer Films
Bonderer, L. J., Studart, A. R., & Gauckler, L. J. (2008) · Science · doi:10.1126/science.1148726 · Cited by 1,031
Microstructural Design of Toughened Ceramics
Becher, P. F. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb06872.x · Cited by 997
Cited by
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Synthetic nacre by predesigned matrix-directed mineralization
Mao, L.-B., Gao, H.-L., Yao, H.-B., Liu, L., Cölfen, H., Liu, G., Chen, S.-M., Li, S.-K., Yan, Y.-X., Liu, Y.-Y., et al. (2016) · Science · doi:10.1126/science.aaf8991 · Cited by 983
Thermal conductivity of polymers and polymer nanocomposites
Huang, C., Qian, X., & Yang, R. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.002 · Cited by 909
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Structure and mechanics of interfaces in biological materials
Barthelat, F., Yin, Z., & Buehler, M. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.7 · Cited by 765
Structural Design Elements in Biological Materials: Application to Bioinspiration
Naleway, S. E., Porter, M. M., McKittrick, J., & Meyers, M. A. (2015) · Advanced Materials · doi:10.1002/adma.201502403 · Cited by 730
Advanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs
Huang, W., Restrepo, D., Jung, J., Su, F. Y., Liu, Z., Ritchie, R. O., McKittrick, J., Zavattieri, P., & Kisailus, D. (2019) · Advanced Materials · doi:10.1002/adma.201901561 · Cited by 662
Zeng, X., Yao, Y., Gong, Z., Wang, F., Sun, R., Xu, J., & Wong, C. (2015) · Small · doi:10.1002/smll.201502173 · Cited by 618
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
An overview of tailoring strain delocalization for strength-ductility synergy
Wu, H., & Fan, G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100675 · Cited by 536
Soft network composite materials with deterministic and bio-inspired designs
Jang, K.-I., Chung, H. U., Xu, S., Lee, C. H., Luan, H., Jeong, J., Cheng, H., Kim, G.-T., Han, S. Y., Lee, J. W., et al. (2015) · Nature Communications · doi:10.1038/ncomms7566 · Cited by 533
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
Tancogne‐Dejean, T., Diamantopoulou, M., Gorji, M. B., Bonatti, C., & Mohr, D. (2018) · Advanced Materials · doi:10.1002/adma.201803334 · Cited by 506
Hu, J., Huang, Y., Yao, Y., Pan, G., Sun, J., Zeng, X., Sun, R., Xu, J.-B., Song, B., & Wong, C.-P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02410 · Cited by 499
Impact-resistant nacre-like transparent materials
Yin, Z., Hannard, F., & Barthelat, F. (2019) · Science · doi:10.1126/science.aaw8988 · Cited by 497
Bioinspired large-scale aligned porous materials assembled with dual temperature gradients
Bai, H., Chen, Y., Delattre, B., Tomsia, A. P., & Ritchie, R. O. (2015) · Science Advances · doi:10.1126/sciadv.1500849 · Cited by 483
3D Freeze‐Casting of Cellular Graphene Films for Ultrahigh‐Power‐Density Supercapacitors
Shao, Y., El‐Kady, M. F., Lin, C., Zhu, G., Marsh, K. L., Hwang, J. Y., Zhang, Q., Li, Y., Wang, H., & Kaner, R. B. (2016) · Advanced Materials · doi:10.1002/adma.201506157 · Cited by 447
Nano/Micro‐Manufacturing of Bioinspired Materials: a Review of Methods to Mimic Natural Structures
Zhang, C., Mcadams, D. A., & Grunlan, J. C. (2016) · Advanced Materials · doi:10.1002/adma.201505555 · Cited by 443
Mass production of bulk artificial nacre with excellent mechanical properties
Gao, H.-L., Chen, S.-M., Mao, L.-B., Song, Z.-Q., Yao, H.-B., Cölfen, H., Luo, X.-S., Zhang, F., Pan, Z., Meng, Y.-F., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00392-z · Cited by 443
Bai, H., Walsh, F., Gludovatz, B., Delattre, B., Huang, C., Chen, Y., Tomsia, A. P., & Ritchie, R. O. (2016) · Advanced Materials · doi:10.1002/adma.201504313 · Cited by 410
Cui, W., Li, M., Liu, J., Wang, B., Zhang, C., Jiang, L., & Cheng, Q. (2014) · ACS Nano · doi:10.1021/nn503755c · Cited by 401
Magnetically assisted slip casting of bioinspired heterogeneous composites
Le Ferrand, H., Bouville, F., Niebel, T. P., & Studart, A. R. (2015) · Nature Materials · doi:10.1038/nmat4419 · Cited by 400
Self-citationDehm, G., Jaya, B. N., Raghavan, R., & Kirchlechner, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.06.019 · Cited by 382
Scotti, K. L., & Dunand, D. C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.001 · Cited by 377
Mehrali, M., Thakur, A., Pennisi, C. P., Talebian, S., Arpanaei, A., Nikkhah, M., & Dolatshahi‐Pirouz, A. (2017) · Advanced Materials · doi:10.1002/adma.201603612 · Cited by 345
Nacre-mimetics with synthetic nanoclays up to ultrahigh aspect ratios
Das, P., Malho, J.-M., Rahimi, K., Schacher, F. H., Wang, B., Demco, D. E., & Walther, A. (2015) · Nature Communications · doi:10.1038/ncomms6967 · Cited by 334
Multiscale engineered artificial tooth enamel
Zhao, H., Liu, S., Wei, Y., Yue, Y., Gao, M., Li, Y., Zeng, X., Deng, X., Kotov, N. A., Guo, L., et al. (2022) · Science · doi:10.1126/science.abj3343 · Cited by 317
Yang, Y., Chen, Z., Song, X., Zhang, Z., Zhang, J., Shung, K. K., Zhou, Q., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605750 · Cited by 316
Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability
Yang, Y., Li, X., Chu, M., Sun, H., Jin, J., Yu, K., Wang, Q., Zhou, Q., & Chen, Y. (2019) · Science Advances · doi:10.1126/sciadv.aau9490 · Cited by 310
Ma, Q., Cheng, H., Jang, K.-I., Luan, H., Hwang, K.-C., Rogers, J. A., Huang, Y., & Zhang, Y. (2016) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2016.02.012 · Cited by 309
Graphene-based flexible electronic devices
Han, T.-H., Kim, H., Kwon, S.-J., & Lee, T.-W. (2017) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2017.05.001 · Cited by 304
Xiong, D.-B., Cao, M., Guo, Q., Tan, Z., Fan, G., Li, Z., & Zhang, D. (2015) · ACS Nano · doi:10.1021/acsnano.5b01067 · Cited by 302
An all-natural bioinspired structural material for plastic replacement
Guan, Q.-F., Yang, H.-B., Han, Z.-M., Ling, Z.-C., & Yu, S.-H. (2020) · Nature Communications · doi:10.1038/s41467-020-19174-1 · Cited by 298
Zhang, X., Zhao, N., & He, C. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100672 · Cited by 293
Zeng, X., Ye, L., Yu, S., Li, H., Sun, R., Xu, J., & Wong, C.-P. (2015) · Nanoscale · doi:10.1039/c5nr00228a · Cited by 286
Hierarchically structured diamond composite with exceptional toughness
Yue, Y., Gao, Y., Hu, W., Xu, B., Wang, J., Zhang, X., Zhang, Q., Wang, Y., Ge, B., Yang, Z., et al. (2020) · Nature · doi:10.1038/s41586-020-2361-2 · Cited by 273
A review on additive manufacturing of ceramic matrix composites
Sun, J., Ye, D., Zou, J., Chen, X., Wang, Y., Yuan, J., Liang, H., Qu, H., Binner, J., & Bai, J. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.06.039 · Cited by 265
Grünewald, T. A., Checchia, S., Dicko, H., Le Moullac, G., Sham Koua, M., Vidal-Dupiol, J., Duboisset, J., Nouet, J., Grauby, O., Di Michiel, M., et al. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2212616119 · Cited by 32
Metadata
- Authors
- Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S.
- Venue
- Nature Materials
- Published
- 2014-03-23
- Volume
- 13
- Issue
- 5
- Pages
- 508-514
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2067220566
- Cited by
- 959
- References
- 34
- FWCI
- 25.07
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.