The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Strong, tough and stiff bioinspired ceramics from brittle constituents
Open accessAbstract
High strength and high toughness are usually mutually exclusive in engineering materials. In ceramics, improving toughness usually relies on the introduction of a metallic or polymeric ductile phase, but this decreases the material's strength and stiffness as well as its high-temperature stability. Although natural materials that are both strong and tough rely on a combination of mechanisms operating at different length scales, the relevant structures have been extremely difficult to replicate. Here, we report a bioinspired approach based on widespread ceramic processing techniques for the fabrication of bulk ceramics without a ductile phase and with a unique combination of high strength (470 MPa), high toughness (22 MPa m(1/2)), and high stiffness (290 GPa). Because only mineral constituents are needed, these ceramics retain their mechanical properties at high temperatures (600 °C). Our bioinspired, material-independent approach should find uses in the design and processing of materials for structural, transportation and energy-related applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Crack deflection processes—I. Theory
Faber, K. T., & Evans, A. G. (1983) · Acta Metallurgica · doi:10.1016/0001-6160(83)90046-9 · Cited by 1,444
Structural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
Materials selection in mechanical design
ASHBY, M. F., & CEBON, D. (1993) · Le Journal de Physique IV · doi:10.1051/jp4:1993701 · Cited by 1,097
Effect of Change of Scale on Sintering Phenomena
Herring, C. (1950) · Journal of Applied Physics · doi:10.1063/1.1699658 · Cited by 1,045
On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure
BARTHELAT, F., TANG, H., ZAVATTIERI, P., LI, C., & ESPINOSA, H. (2007) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.07.007 · Cited by 1,032
Bioinspired Design and Assembly of Platelet Reinforced Polymer Films
Bonderer, L. J., Studart, A. R., & Gauckler, L. J. (2008) · Science · doi:10.1126/science.1148726 · Cited by 1,031
Microstructural Design of Toughened Ceramics
Becher, P. F. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb06872.x · Cited by 997
Single-wall carbon nanotubes as attractive toughening agents in alumina-based nanocomposites
Zhan, G.-D., Kuntz, J. D., Wan, J., & Mukherjee, A. K. (2003) · Nature Materials · doi:10.1038/nmat793 · Cited by 961
A simple way to make tough ceramics
Clegg, W. J., Kendall, K., Alford, N. M., Button, T. W., & Birchall, J. D. (1990) · Nature · doi:10.1038/347455a0 · Cited by 840
Evaluated Material Properties for a Sintered alpha‐Alumina
Munro, R. G. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb03074.x · Cited by 836
The mechanical efficiency of natural materials
Wegst, U. G. K., & Ashby, M. F. (2004) · Philosophical Magazine · doi:10.1080/14786430410001680935 · Cited by 821
A mechanism for the control of crack propagation in all-brittle systems
Cook, J., & Gordon, J. E. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0248 · Cited by 779
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
Erb, R. M., Libanori, R., Rothfuchs, N., & Studart, A. R. (2012) · Science · doi:10.1126/science.1210822 · Cited by 675
The true toughness of human cortical bone measured with realistically short cracks
Koester, K. J., Ager, J. W., & Ritchie, R. O. (2008) · Nature Materials · doi:10.1038/nmat2221 · Cited by 558
From brittle to ductile fracture of bone
Peterlik, H., Roschger, P., Klaushofer, K., & Fratzl, P. (2006) · Nature Materials · doi:10.1038/nmat1545 · Cited by 489
Structural and mechanical properties of the organic matrix layers of nacre
Song, F., Soh, A. K., & Bai, Y. L. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00215-1 · Cited by 421
Designing highly toughened hybrid composites through nature-inspired hierarchical complexity
Launey, M. E., Munch, E., Alsem, D. H., Barth, H. B., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.03.003 · Cited by 333
A novel biomimetic approach to the design of high-performance ceramic–metal composites
Launey, M. E., Munch, E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0331 · Cited by 294
Architectural Control of Freeze‐Cast Ceramics Through Additives and Templating
Munch, E., Saiz, E., Tomsia, A. P., & Deville, S. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03087.x · Cited by 274
Self-citationToughness amplification in natural composites
Barthelat, F., & Rabiei, R. (2011) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2011.01.001 · Cited by 265
Fracture in human cortical bone: local fracture criteria and toughening mechanisms
Nalla, R. K., Stölken, J. S., Kinney, J. H., & Ritchie, R. O. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.07.010 · Cited by 260
Yamamoto, G., Omori, M., Hashida, T., & Kimura, H. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/31/315708 · Cited by 253
Metastable and unstable cellular solidification of colloidal suspensions
Deville, S., Maire, E., Bernard-Granger, G., Lasalle, A., Bogner, A., Gauthier, C., Leloup, J., & Guizard, C. (2009) · Nature Materials · doi:10.1038/nmat2571 · Cited by 229
Self-citationBioinspired Design Criteria for Damage‐Resistant Materials with Periodically Varying Microstructure
Kolednik, O., Predan, J., Fischer, F. D., & Fratzl, P. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100443 · Cited by 211
Okumura, K., & de Gennes, P.-G. (2001) · The European Physical Journal E · doi:10.1007/s101890170150 · Cited by 196
Metastable and unstable cellular solidification of colloidal suspensions
(2009) · Cited by 162
Properties and microstructures of Lanxide� Al2O3-Al ceramic composite materials
Aghajanian, M. K., Macmillan, N. H., Kennedy, C. R., Luszcz, S. J., & Roy, R. (1989) · Journal of Materials Science · doi:10.1007/bf01107457 · Cited by 156
Deville, S., Maire, É., Lasalle, A., Bogner, A., Gauthier, C., Leloup, J., & Guizard, C. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03163.x · Cited by 151
Self-citationPlatelets self-assemble into porous nacre during freeze casting
Hunger, P. M., Donius, A. E., & Wegst, U. G. K. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.10.013 · Cited by 132
Mechanics of Platelet-Reinforced Composites Assembled Using Mechanical and Magnetic Stimuli
Libanori, R., Erb, R. M., & Studart, A. R. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402975a · Cited by 101
Tough and stiff composites with simple building blocks
Dimas, L. S., & Buehler, M. J. (2013) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2013.88 · Cited by 39
Cited by
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Synthetic nacre by predesigned matrix-directed mineralization
Mao, L.-B., Gao, H.-L., Yao, H.-B., Liu, L., Cölfen, H., Liu, G., Chen, S.-M., Li, S.-K., Yan, Y.-X., Liu, Y.-Y., et al. (2016) · Science · doi:10.1126/science.aaf8991 · Cited by 983
Thermal conductivity of polymers and polymer nanocomposites
Huang, C., Qian, X., & Yang, R. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.002 · Cited by 909
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Metadata
- Authors
- Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S.
- Venue
- Nature Materials
- Published
- 2014-03-23
- Volume
- 13
- Issue
- 5
- Pages
- 508-514
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2067220566
- Cited by
- 959
- References
- 34
- FWCI
- 25.07
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.