CoChat

The DOI matches its Crossref record; 62 of the 63 references it cites were found in a registry or an index.

Self-powered ultraflexible photonic skin for continuous bio-signal detection via air-operation-stable polymer light-emitting diodes

Open access

Published version of a preprint

Abstract

Ultraflexible optical devices have been used extensively in next-generation wearable electronics owing to their excellent conformability to human skins. Long-term health monitoring also requires the integration of ultraflexible optical devices with an energy-harvesting power source; to make devices self-powered. However, system-level integration of ultraflexible optical sensors with power sources is challenging because of insufficient air operational stability of ultraflexible polymer light-emitting diodes. Here we develop an ultraflexible self-powered organic optical system for photoplethysmogram monitoring by combining air-operation-stable polymer light-emitting diodes, organic solar cells, and organic photodetectors. Adopting an inverted structure and a doped polyethylenimine ethoxylated layer, ultraflexible polymer light-emitting diodes retain 70% of the initial luminance even after 11.3 h of operation under air. Also, integrated optical sensors exhibit a high linearity with the light intensity exponent of 0.98 by polymer light-emitting diode. Such self-powered, ultraflexible photoplethysmogram sensors perform monitoring of blood pulse signals as 77 beats per minute.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-021-22558-6

Cites

62 of 62 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Ultraflexible, self-powered photoplethysmogram sensor. a Schematic diagram of the ultraflexible, self-powered photoplethysmograpm (PPG) sensor on human hands. Ultraflexible organic photovoltaic (OPV) module generates electrical power from sunlight and drives polymer light-emitting diode (PLED) and organic photodiode (OPD). b Schematic diagram of the self-powered PPG sensor with PLED, OPD, and OPV module. c A photograph of the ultraflexible OPV module under one-sun illumination. Scale bar indicates 1 cm. d A top-view photograph of the ultraflexible, self-powered PPG sensor. Scale bar indicates 1 cm. e An electrical circuit of self-powered PPG sensor.
Fig. 1 Ultraflexible, self-powered photoplethysmogram sensor. a Schematic diagram of the ultraflexible, self-powered photoplethysmograpm (PPG) sensor on human hands. Ultraflexible organic photovoltaic (OPV) module generates electrical power from sunlight and drives polymer light-emitting diode (PLED) and organic photodiode (OPD). b Schematic diagram of the self-powered PPG sensor with PLED, OPD, and OPV module. c A photograph of the ultraflexible OPV module under one-sun illumination. Scale bar indicates 1 cm. d A top-view photograph of the ultraflexible, self-powered PPG sensor. Scale bar indicates 1 cm. e An electrical circuit of self-powered PPG sensor.CC BY · PubMed Central
Fig. 2 Air operational stable, ultraflexible polymer light-emitting diodes. a Schematic diagram of cross-sectional view of the stack present in polymer light-emitting diode (PLED). The device structure is Indium tin oxide (ITO)/Zinc oxide (ZnO)/Polyethyleneimine ethoxylated (PEIE): 8-quinolinolato lithium (Liq)/Superyellow/Molybdenum oxide (MoOX)/Al. b Comparison of the lifetime without encapsulation and turn-on voltage of previously reported organic light-emitting diode (OLED), which are represented with black diamonds, and PLED, with blue upward triangles. c Current density-luminance-voltage curves of PLED on glass (black curves) and ultraflexible substrate (red curves). d A photograph of the ultraflexible PLED during operation. Operation voltage of PLED was 6 V. Scale bar indicates 1 cm. e Current efficiency characteristics of the PLED on glass (black curves) and ultraflexible substrate (red curves). f Air operational stability of the PLED under constant-current operation in ambient air. Current density to drive PLED was set to be 8 mA/cm2. The black line indicates the PLED on the glass substrate without any encapsulation; the red line indicates the PLED on the glass substrate with parylene encapsulation; and the blue line indicates the PLED on the ultraflexible substrate with parylene encapsulation. The ultraflexible PLEDs were measured in the freestanding state.
Fig. 2 Air operational stable, ultraflexible polymer light-emitting diodes. a Schematic diagram of cross-sectional view of the stack present in polymer light-emitting diode (PLED). The device structure is Indium tin oxide (ITO)/Zinc oxide (ZnO)/Polyethyleneimine ethoxylated (PEIE): 8-quinolinolato lithium (Liq)/Superyellow/Molybdenum oxide (MoOX)/Al. b Comparison of the lifetime without encapsulation and turn-on voltage of previously reported organic light-emitting diode (OLED), which are represented with black diamonds, and PLED, with blue upward triangles. c Current density-luminance-voltage curves of PLED on glass (black curves) and ultraflexible substrate (red curves). d A photograph of the ultraflexible PLED during operation. Operation voltage of PLED was 6 V. Scale bar indicates 1 cm. e Current efficiency characteristics of the PLED on glass (black curves) and ultraflexible substrate (red curves). f Air operational stability of the PLED under constant-current operation in ambient air. Current density to drive PLED was set to be 8 mA/cm2. The black line indicates the PLED on the glass substrate without any encapsulation; the red line indicates the PLED on the glass substrate with parylene encapsulation; and the blue line indicates the PLED on the ultraflexible substrate with parylene encapsulation. The ultraflexible PLEDs were measured in the freestanding state.CC BY · PubMed Central
Fig. 3 Optical responses and linearities of organic photodiode for various light sources. a Schematic diagram of the cross-sectional view of the stack of organic photodiode (OPD). The device structure is Indium tin oxide (ITO)/Zinc oxide (ZnO)/2,5-bis(3-(2-ethylhexyl-5-(trimethylstannyl)thiophen-2-yl)thiazolo[5,4-d]thiazole-2-butyloctyl (PTzNTz-BOBO):[6,6]-Phenyl-C71-butyric acid methyl ester (PC71BM)/Molybdenum oxide (MoOX)/Ag. b Light intensity dependence of OPD with 1-sun illumination form solar simulator. Light intensity of solar simulator was varied from 0.01 to 1-sun with optical filters. The red dots represent short-circuit current, and the blue dots open-circuit voltage. The red dash line represents a linear fitted line of short-circuit current and light intensity. The blue dash line represents a logarithmically fitted line of open-circuit voltage and light intensity. α represents light intensity exponent of OPD with 1-sun illumination. c External quantum efficiency (EQE) spectra of OPD and Electroluminescence (EL) spectra of polymer light-emitting diode (PLED). The green curve represents EQE spectra of OPD, and the orange curve represents EL spectra of PLED. d J–V characteristics of OPD illuminated by PLED. Optical power of PLED was varied by changing driving voltage of PLED. Each of the devices are stacked together with a face-to-face configuration. The black curve represents current density-voltage dependence of OPD under dark condition, and the bule curves to red curves represent current density-voltage dependences by increasing optical power of PLED. e Light intensity dependence of OPD with PLED illumination. The red dots represent short-circuit current, and the blue dots open-circuit voltage. The red dash line represents a linear fitted line of short-circuit current and light intensity. The blue dash line represents a logarithmically fitted line of open-circuit voltage and light intensity. α represents light intensity exponent of OPD with PLED illumination.
Fig. 3 Optical responses and linearities of organic photodiode for various light sources. a Schematic diagram of the cross-sectional view of the stack of organic photodiode (OPD). The device structure is Indium tin oxide (ITO)/Zinc oxide (ZnO)/2,5-bis(3-(2-ethylhexyl-5-(trimethylstannyl)thiophen-2-yl)thiazolo[5,4-d]thiazole-2-butyloctyl (PTzNTz-BOBO):[6,6]-Phenyl-C71-butyric acid methyl ester (PC71BM)/Molybdenum oxide (MoOX)/Ag. b Light intensity dependence of OPD with 1-sun illumination form solar simulator. Light intensity of solar simulator was varied from 0.01 to 1-sun with optical filters. The red dots represent short-circuit current, and the blue dots open-circuit voltage. The red dash line represents a linear fitted line of short-circuit current and light intensity. The blue dash line represents a logarithmically fitted line of open-circuit voltage and light intensity. α represents light intensity exponent of OPD with 1-sun illumination. c External quantum efficiency (EQE) spectra of OPD and Electroluminescence (EL) spectra of polymer light-emitting diode (PLED). The green curve represents EQE spectra of OPD, and the orange curve represents EL spectra of PLED. d J–V characteristics of OPD illuminated by PLED. Optical power of PLED was varied by changing driving voltage of PLED. Each of the devices are stacked together with a face-to-face configuration. The black curve represents current density-voltage dependence of OPD under dark condition, and the bule curves to red curves represent current density-voltage dependences by increasing optical power of PLED. e Light intensity dependence of OPD with PLED illumination. The red dots represent short-circuit current, and the blue dots open-circuit voltage. The red dash line represents a linear fitted line of short-circuit current and light intensity. The blue dash line represents a logarithmically fitted line of open-circuit voltage and light intensity. α represents light intensity exponent of OPD with PLED illumination.CC BY · PubMed Central
Fig. 4 Blood pulse detection of self-powered photoplethysmogram sensors. a Schematic diagram describing the operational mechanism of photoplethysmogram (PPG) by polymer light-emitting diode (PLED) and organic photodiode (OPD). b Output voltage characteristics of OPD with PPG measurement. The PLED was powered by 10 series-connected organic photovoltaic (OPV) modules with one-sun illumination from a solar simulator. All devices are on glass substrate. c A photograph of the ultraflexible, self-powered PPG sensor. Scale bar indicates 1 cm. d Output voltage characteristics of OPD with PPG measurement. The PLED was powered by 10 series-connected OPV modules with one-sun illumination from a solar simulator. All devices are on ultraflexible substrate. Blood pulse frequency was calculated to be 77 beats per minute (bpm) from the measurement results.
Fig. 4 Blood pulse detection of self-powered photoplethysmogram sensors. a Schematic diagram describing the operational mechanism of photoplethysmogram (PPG) by polymer light-emitting diode (PLED) and organic photodiode (OPD). b Output voltage characteristics of OPD with PPG measurement. The PLED was powered by 10 series-connected organic photovoltaic (OPV) modules with one-sun illumination from a solar simulator. All devices are on glass substrate. c A photograph of the ultraflexible, self-powered PPG sensor. Scale bar indicates 1 cm. d Output voltage characteristics of OPD with PPG measurement. The PLED was powered by 10 series-connected OPV modules with one-sun illumination from a solar simulator. All devices are on ultraflexible substrate. Blood pulse frequency was calculated to be 77 beats per minute (bpm) from the measurement results.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 63 references

Cited by

See all 253

Metadata

Authors
Jinno, H., Yokota, T., Koizumi, M., Yukita, W., Saito, M., Osaka, I., Fukuda, K., & Someya, T.
Affiliations
  • ETH Zurich (CH)
  • The University of Tokyo (JP)
  • Hiroshima University (JP)
  • RIKEN (JP)
Corresponding author
Someya, Takao
Venue
Nature Communications
Published
2021-04-14
Volume
12
Issue
1
Pages
2234-2234
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3117206779
Cited by
253
References
63
Citations by year
2026: 33 · 2025: 55 · 2024: 57 · 2023: 55 · 2022: 38 · 2021: 15
FWCI
12.48
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Research Square (acceptedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Repository for Publications and Research Data (ETH Zurich) (submittedVersion, cc-by)
  • ETH Zürich Research Collection (cc-by)
Funders
MEXT | JST | Accelerated Innovation Research Initiative Turning Top Science and Ideas into High-Impact Values (JPMJMI17F1)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Non-Invasive Vital Sign Monitoring
  • Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
Keywords
self-powered devices, polymer light-emitting diodes, wearable electronics, organic solar cells, organic photodetectors, energy harvesting
MeSH terms
Wearable Electronic Devices, Equipment Design, Heart Rate, Humans, Light, Monitoring, Physiologic, Polymers, Electric Power Supplies, Solar Energy, Photons, Optical Devices

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Self-powered ultraflexible photonic skin for continuous bio-signal detection via air-operation-stable polymer light-emitting diodes. https://app.cochat.ai/papers/10.1038/s41467-021-22558-6
The paper
Jinno, H., Yokota, T., Koizumi, M., Yukita, W., Saito, M., Osaka, I., Fukuda, K., & Someya, T. (2021). Self-powered ultraflexible photonic skin for continuous bio-signal detection via air-operation-stable polymer light-emitting diodes. Nature Communications. https://doi.org/10.1038/s41467-021-22558-6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.