The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Self-assembled bilayer for perovskite solar cells with improved tolerance against thermal stresses
Open accessAbstract
The adoption of perovskite solar cells (PSCs) requires improved resistance to high temperatures and temperature variations. Hole-selective self-assembled monolayers (SAMs) have enabled progress in the performance of inverted PSCs, yet they may compromise temperature stability owing to desorption and weak interfacial contact. Here we developed a self-assembled bilayer by covalently interconnecting a phosphonic acid SAM with a triphenylamine upper layer. This polymerized network, formed through Friedel–Crafts alkylation, resisted thermal degradation up to 100 °C for 200 h. Meanwhile, the face-on-oriented upper layer exhibited adhesive contact with perovskites, leading to a 1.7-fold improvement in adhesion energy compared with the SAM–perovskite interface. We reported power conversion efficiencies exceeding 26% for inverted PSCs. The champion devices demonstrated less than 4% and 3% efficiency loss after 2,000 h damp heat exposure (85 °C and 85% relative humidity) and over 1,200 thermal cycles between −40 °C and 85 °C, respectively, meeting the temperature stability criteria outlined in the International Electrotechnical Commission 61215:2021 standards. To improve the tolerance of perovskite solar cells against high temperatures and temperature variations, Dong et al. covalently cross-link two molecules in the charge transport layer to strengthen adhesion with the perovskite layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Grimme, S., Antony, J., Ehrlich, S., & Krieg, H. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3382344 · Cited by 59,686
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 3×
“31) 17,44 .”
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Self-citationAl-Ashouri, A., Magomedov, A., Roß, M., Jošt, M., Talaikis, M., Chistiakova, G., Bertram, T., Márquez, J. A., Köhnen, E., Kasparavičius, E., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02268f · Cited by 1,214
Minimizing buried interfacial defects for efficient inverted perovskite solar cells
Zhang, S., Ye, F., Wang, X., Chen, R., Zhang, H., Zhan, L., Jiang, X., Li, Y., Ji, X., Liu, S., et al. (2023) · Science · doi:10.1126/science.adg3755 · Cited by 1,159
Self-citationSurface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture
Turren-Cruz, S.-H., Hagfeldt, A., & Saliba, M. (2018) · Science · doi:10.1126/science.aat3583 · Cited by 1,055
Self-citationOrganometallic-functionalized interfaces for highly efficient inverted perovskite solar cells
Li, Z., Li, B., Wu, X., Sheppard, S. A., Zhang, S., Gao, D., Long, N. J., & Zhu, Z. (2022) · Science · doi:10.1126/science.abm8566 · Cited by 1,043
Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells
Li, X., Zhang, W., Guo, X., Lu, C., Wei, J., & Fang, J. (2022) · Science · doi:10.1126/science.abl5676 · Cited by 907
Self-citationStabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions
Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., et al. (2022) · Science · doi:10.1126/science.abm5784 · Cited by 855
Homogenizing out-of-plane cation composition in perovskite solar cells
Liang, Z., Zhang, Y., Xu, H., Chen, W., Liu, B., Zhang, J., Zhang, H., Wang, Z., Kang, D.-H., Zeng, J., et al. (2023) · Nature · doi:10.1038/s41586-023-06784-0 · Cited by 791
Self-citationInverted perovskite solar cells using dimethylacridine-based dopants
Tan, Q., Li, Z., Luo, G., Zhang, X., Che, B., Chen, G., Gao, H., He, D., Ma, G., Wang, J., et al. (2023) · Nature · doi:10.1038/s41586-023-06207-0 · Cited by 786
Improving interface quality for 1-cm2 all-perovskite tandem solar cells
He, R., Wang, W., Yi, Z., Lang, F., Chen, C., Luo, J., Zhu, J., Thiesbrummel, J., Shah, S., Wei, K., et al. (2023) · Nature · doi:10.1038/s41586-023-05992-y · Cited by 705
Domanski, K., Alharbi, E. A., Hagfeldt, A., Grätzel, M., & Tress, W. (2018) · Nature Energy · doi:10.1038/s41560-017-0060-5 · Cited by 685
Self-citationHomogenized NiO x nanoparticles for improved hole transport in inverted perovskite solar cells
Yu, S., Xiong, Z., Zhou, H., Zhang, Q., Wang, Z., Ma, F., Qu, Z., Zhao, Y., Chu, X., Zhang, X., et al. (2023) · Science · doi:10.1126/science.adj8858 · Cited by 672
Reducing nonradiative recombination in perovskite solar cells with a porous insulator contact
Peng, W., Mao, K., Cai, F., Meng, H., Zhu, Z., Li, T., Yuan, S., Xu, Z., Feng, X., Xu, J., et al. (2023) · Science · doi:10.1126/science.ade3126 · Cited by 666
Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability
Dai, Z., Yadavalli, S. K., Chen, M., Abbaspourtamijani, A., Qi, Y., & Padture, N. P. (2021) · Science · doi:10.1126/science.abf5602 · Cited by 625
Stability-limiting heterointerfaces of perovskite photovoltaics
Tan, S., Huang, T., Yavuz, I., Wang, R., Yoon, T. W., Xu, M., Xing, Q., Park, K., Lee, D.-K., Chen, C.-H., et al. (2022) · Nature · doi:10.1038/s41586-022-04604-5 · Cited by 590
Self-citationOrigins and influences of metallic lead in perovskite solar cells
Liang, J., Hu, X., Wang, C., Liang, C., Chen, C., Xiao, M., Li, J., Tao, C., Xing, G., Yu, R., et al. (2022) · Joule · doi:10.1016/j.joule.2022.03.005 · Cited by 576 · cited 2×
“48.”
Highly efficient p-i-n perovskite solar cells that endure temperature variations
Li, G., Su, Z., Canil, L., Hughes, D., Aldamasy, M. H., Dagar, J., Trofimov, S., Wang, L., Zuo, W., Jerónimo-Rendon, J. J., et al. (2023) · Science · doi:10.1126/science.add7331 · Cited by 572
Self-citationLow-loss contacts on textured substrates for inverted perovskite solar cells
Park, S. M., Wei, M., Lempesis, N., Yu, W., Hossain, T., Agosta, L., Carnevali, V., Atapattu, H. R., Serles, P., Eickemeyer, F. T., et al. (2023) · Nature · doi:10.1038/s41586-023-06745-7 · Cited by 572
Self-citationHotchkiss, P. J., Jones, S. C., Paniagua, S. A., Sharma, A., Kippelen, B. J., Armstrong, N. R., & Marder, S. R. (2011) · Accounts of Chemical Research · doi:10.1021/ar200119g · Cited by 450
Li, H., Zhang, C., Gong, C., Zhang, D., Zhang, H., Zhuang, Q., Yu, X., Gong, S., Chen, X., Yang, J., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01295-8 · Cited by 404
Self-citationStabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking
Mei, A., Sheng, Y., Ming, Y., Hu, Y., Rong, Y., Zhang, W., Luo, S., Na, G., Tian, C., Hou, X., et al. (2020) · Joule · doi:10.1016/j.joule.2020.09.010 · Cited by 386
Liu, M., Bi, L., Jiang, W., Zeng, Z., Tsang, S., Lin, F. R., & Jen, A. K. ‐. (2023) · Advanced Materials · doi:10.1002/adma.202304415 · Cited by 378
Organic Hole‐Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells
Yao, Y., Cheng, C., Zhang, C., Hu, H., Wang, K., & De Wolf, S. (2022) · Advanced Materials · doi:10.1002/adma.202203794 · Cited by 363
Zheng, X., Li, Z., Zhang, Y., Chen, M., Liu, T., Xiao, C., Gao, D., Patel, J. B., Kuciauskas, D., Magomedov, A., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01227-6 · Cited by 359
Self-citationAccelerated aging of all-inorganic, interface-stabilized perovskite solar cells
Zhao, X., Liu, T., Burlingame, Q. C., Liu, T., Holley, R., Cheng, G., Yao, N., Gao, F., & Loo, Y.-L. (2022) · Science · doi:10.1126/science.abn5679 · Cited by 351
Aukland, M. H., Šiaučiulis, M., West, A., Perry, G. J. P., & Procter, D. J. (2020) · Nature Catalysis · doi:10.1038/s41929-019-0415-3 · Cited by 316
Aqueous synthesis of perovskite precursors for highly efficient perovskite solar cells
Zhu, P., Wang, D., Zhang, Y., Liang, Z., Li, J., Zeng, J., Zhang, J., Xu, Y., Wu, S., Liu, Z., et al. (2024) · Science · doi:10.1126/science.adj7081 · Cited by 306
Self-citationChen, R., Wang, J., Liu, Z., Ren, F., Liu, S., Zhou, J., Wang, H., Meng, X., Zhang, Z., Guan, X., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01288-7 · Cited by 302
Towards linking lab and field lifetimes of perovskite solar cells
Jiang, Q., Tirawat, R., Kerner, R. A., Gaulding, E. A., Xian, Y., Wang, X., Newkirk, J. M., Yan, Y., Berry, J. J., & Zhu, K. (2023) · Nature · doi:10.1038/s41586-023-06610-7 · Cited by 282
Radical polymeric p-doping and grain modulation for stable, efficient perovskite solar modules
You, S., Zeng, H., Liu, Y., Han, B., Li, M., Li, L., Zheng, X., Guo, R., Luo, L., Li, Z., et al. (2023) · Science · doi:10.1126/science.add8786 · Cited by 260
Self-citationMcMeekin, D. P., Holzhey, P., Fürer, S. O., Harvey, S. P., Schelhas, L. T., Ball, J. M., Mahesh, S., Seo, S., Hawkins, N., Lu, J., et al. (2023) · Nature Materials · doi:10.1038/s41563-022-01399-8 · Cited by 235
Zhao, Y., Zhang, J., Xu, Z., Sun, S., Langner, S., Hartono, N. T. P., Heumueller, T., Hou, Y., Elia, J., Li, N., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-22472-x · Cited by 180
Guzmán, E., Rubio, R. G., & Ortega, F. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102197 · Cited by 167
Lin, X., Su, H., He, S., Song, Y., Wang, Y., Qin, Z., Wu, Y., Yang, X., Han, Q., Fang, J., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01038-1 · Cited by 150
Self-citationTopa-Skwarczyńska, M., Hola, E., Galek, M., Petko, F., Pilch, M., Popielarz, R., Morlet‐Savary, F., Graff, B., Lalevée, J., & Ortyl, J. (2020) · Polymer Chemistry · doi:10.1039/d0py00677g · Cited by 61
Ahmad, T., Dasgupta, S., Almosni, S., Dudkowiak, A., & Wojciechowski, K. (2022) · Energy & environment materials · doi:10.1002/eem2.12434 · Cited by 33
Wang, Y.-X., & Leung, M. (2011) · Macromolecules · doi:10.1021/ma2018217 · Cited by 21
Metadata
- Authors
- Dong, B., Wei, M., Li, Y., Yang, Y., Ma, W., Zhang, Y., Ran, Y., Cui, M., Su, Z., Fan, Q., Bi, Z., Edvinsson, T., Ding, Z., Ju, H., You, S., Zakeeruddin, S. M., Li, X., Hagfeldt, A., Grätzel, M., & Liu, Y.
- Venue
- Nature Energy
- Published
- 2025-01-06
- Volume
- 10
- Issue
- 3
- Pages
- 342-353
- ISSN
- 2058-7546 (ISSN-L)
- OpenAlex
- W4406104388
- Cited by
- 261
- References
- 47
- FWCI
- 59.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.