Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 63 of the 70 references it cites were found in a registry or an index; 34 of the 50 sources its claims cite were checked for support.

Terahertz electric-field-driven dynamical multiferroicity in SrTiO3

Open access

Abstract

The emergence of collective order in matter is among the most fundamental and intriguing phenomena in physics. In recent years, the dynamical control and creation of novel ordered states of matter not accessible in thermodynamic equilibrium is receiving much attention 1–6. The theoretical concept of dynamical multiferroicity has been introduced to describe the emergence of magnetization due to time-dependent electric polarization in non-ferromagnetic materials 7,8. In simple terms, the coherent rotating motion of the ions in a crystal induces a magnetic moment along the axis of rotation. Here we provide experimental evidence of room-temperature magnetization in the archetypal paraelectric perovskite SrTiO 3 due to this mechanism. We resonantly drive the infrared-active soft phonon mode with an intense circularly polarized terahertz electric field and detect the time-resolved magneto-optical Kerr effect. A simple model, which includes two coupled nonlinear oscillators whose forces and couplings are derived with ab initio calculations using self-consistent phonon theory at a finite temperature 9, reproduces qualitatively our experimental observations. A quantitatively correct magnitude was obtained for the effect by also considering the phonon analogue of the reciprocal of the Einstein–de Haas effect, which is also called the Barnett effect, in which the total angular momentum from the phonon order is transferred to the electronic one. Our findings show a new path for the control of magnetism, for example, for ultrafast magnetic switches, by coherently controlling the lattice vibrations with light.

Overview

CoChat Summary

## TL;DR

The paper reports time-resolved magneto-optical Kerr signals in SrTiO3 driven by intense circularly polarized terahertz pulses and interprets them as evidence of room-temperature magnetization from dynamical multiferroicity. The observed signal qualitatively matches coupled-phonon and Kerr-effect modeling, but the experimentally inferred magnetic moment is about four orders of magnitude larger than the pure-phonon estimate.

## Key findings

  • Using ~3 THz, 0.5 THz-bandwidth circularly polarized terahertz pulses with peak fields of about 200–300 kV cm−1 on SrTiO3, the authors observed a Kerr-rotation difference signal with two Fourier components: one centered at approximately 0.6 THz and another at around 6 THz.
  • The Kerr-response amplitudes at 300 K showed a clear quadratic dependence on terahertz field amplitude for both frequency components.
  • The response varied with temperature from 160 to 360 K, with the overall signal largest near 280 K and decreasing away from that temperature; the calculated dynamical multiferroicity response showed a peaked behavior near resonance of the soft phonon with the pump.
  • The calculated magnetic moment from dynamical multiferroicity was of order 10−2 μN per unit cell, whereas the estimate from the measured Kerr signal corresponded to about 10−1 μB per unit cell, i.e. roughly four orders of magnitude larger than the theoretical phonon-only value.

## Methods

  • Experimental design: a SrTiO3 crystal (10 mm × 10 mm × 500 μm) was pumped by broadband single-cycle terahertz radiation generated by optical rectification in DSTMS, then filtered to a narrowband 3 THz pulse and converted to circular polarization with a terahertz quarter-wave plate; the probe was a 400 nm, 40 fs pulse used in time-resolved magneto-optical Kerr measurements.
  • Sample and field characterization: the terahertz electric field at the sample was measured by electro-optic sampling in GaP; the authors report a maximum broadband field of about 1.15 MV cm−1 and a typical filtered field of 200–300 kV cm−1, with circular polarization characterized as 85–90% in the relevant band.
  • Analysis/modeling: they combined FFT analysis of Kerr-rotation traces with self-consistent phonon and DFT-based ab initio calculations for cubic SrTiO3, a phenomenological model of two anharmonically coupled oscillators, and modeling of the electronic and ionic Kerr contributions; the Kerr rotation was used to estimate the induced magnetic field via the Verdet constant.
  • Computational details: DFT calculations used VASP with HSE06, a 550 eV cutoff, and a 12 × 12 × 12 k-point mesh; self-consistent phonon calculations were performed with ALAMODE using 2 × 2 × 2 supercells and fourth-order interatomic force constants.

## Limitations

  • The paper explicitly states that the calculated magnetic moment from dynamical multiferroicity is much smaller than the experimental estimate by about four orders of magnitude, indicating “an additional and key mechanism” is needed to explain the data quantitatively.
  • The authors state that a rigorous ab initio estimate of the effective nonlinear coupling between electronic and ionic Kerr contributions would require a state-of-the-art extension of DFT codes and was beyond the scope of the work.
  • Evident from the text: the magnetic field and moment are inferred indirectly from Kerr rotation and the Verdet constant rather than measured directly; the authors also note that the data cannot distinguish orbital from spin contributions to the induced angular momentum.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/s41586-024-07175-9

Cites

63 of 63 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Schematic of the experimental realization of dynamical multiferroicity. a, SrTiO3 unit cell in the absence of a terahertz electric field. When a circularly polarized terahertz field pulse drives a circular atomic motion, dynamical multiferroicity is expected to create a net magnetic moment in the unit cell. b,c, The north pole points up for a pulse that is left-handed (b), and down for a pulse that is right-handed (c).
Fig. 1 Schematic of the experimental realization of dynamical multiferroicity. a, SrTiO3 unit cell in the absence of a terahertz electric field. When a circularly polarized terahertz field pulse drives a circular atomic motion, dynamical multiferroicity is expected to create a net magnetic moment in the unit cell. b,c, The north pole points up for a pulse that is left-handed (b), and down for a pulse that is right-handed (c).CC BY · PubMed Central
Fig. 2 Experimental detection of the time-resolved Kerr rotation. a,b, Measured Kerr rotation as a function of pump–probe delay for 400 nm probe pulses after excitation by the terahertz pump field. The probe polarization is parallel to the [100] crystal axis and the sample is tilted at an angle of 45° (Methods). a, Difference between the responses from circularly polarized fields with opposite helicities. b, FFT of the time trace in a together with the spectrum of the product of the two components Ex and Ey of the incident circular pump field (Methods). The standard error is indicated by the shaded area. Source Data
Fig. 2 Experimental detection of the time-resolved Kerr rotation. a,b, Measured Kerr rotation as a function of pump–probe delay for 400 nm probe pulses after excitation by the terahertz pump field. The probe polarization is parallel to the [100] crystal axis and the sample is tilted at an angle of 45° (Methods). a, Difference between the responses from circularly polarized fields with opposite helicities. b, FFT of the time trace in a together with the spectrum of the product of the two components Ex and Ey of the incident circular pump field (Methods). The standard error is indicated by the shaded area. Source DataCC BY · PubMed Central
Fig. 3 Temperature and field dependence of the measured Kerr rotation. a, FFT of the difference of the magneto-optical Kerr effect response from opposite circularly polarized fields at a few selected temperatures. The error bars in the legend represent the standard error of the corresponding dataset. b, Dependence of the amplitude of the two main spectral peaks on the terahertz electric field. The standard error is smaller than the symbol size. Blue solid lines are quadratic fits to the data at ω− and ω+. Yellow lines indicate the field dependence of the ω− and ω+ peaks for the ExEy product, after normalization to the experimental (Exp.) ω+ value at maximum field. Source Data
Fig. 3 Temperature and field dependence of the measured Kerr rotation. a, FFT of the difference of the magneto-optical Kerr effect response from opposite circularly polarized fields at a few selected temperatures. The error bars in the legend represent the standard error of the corresponding dataset. b, Dependence of the amplitude of the two main spectral peaks on the terahertz electric field. The standard error is smaller than the symbol size. Blue solid lines are quadratic fits to the data at ω− and ω+. Yellow lines indicate the field dependence of the ω− and ω+ peaks for the ExEy product, after normalization to the experimental (Exp.) ω+ value at maximum field. Source DataCC BY · PubMed Central
Fig. 4 Experimental and modelled dynamical multiferroicity. a, Calculated total time-domain polarization rotation (blue), which includes the contribution of both EKE and IKE (yellow) and of the magnetic moment μph due to dynamical multiferroicity (orange). b, FFT of the time-domain response, decomposing the spectral features of the different contributions. c, Calculated temperature dependence of the magnetic moment expected from the pure dynamical multiferroicity mechanism (semi-transparent symbols and line) and experimentally extracted spectral weight of the low-frequency peak (solid symbols and line). The error bars represent the standard error of the corresponding dataset. d, Pictorial representation of the phonon Barnett effect with enhancement factor B. Source Data
Fig. 4 Experimental and modelled dynamical multiferroicity. a, Calculated total time-domain polarization rotation (blue), which includes the contribution of both EKE and IKE (yellow) and of the magnetic moment μph due to dynamical multiferroicity (orange). b, FFT of the time-domain response, decomposing the spectral features of the different contributions. c, Calculated temperature dependence of the magnetic moment expected from the pure dynamical multiferroicity mechanism (semi-transparent symbols and line) and experimentally extracted spectral weight of the low-frequency peak (solid symbols and line). The error bars represent the standard error of the corresponding dataset. d, Pictorial representation of the phonon Barnett effect with enhancement factor B. Source DataCC BY · PubMed Central
Extended Data Fig. 1 Individual helicity measurements and difference. a,b, Measured Kerr rotation as a function of pump–probe delay for 400 nm probe pulses after sample excitation via right (RCP) (a) and left (LCP) (b) circularly polarized terahertz pump fields. c, Difference of the responses from circularly polarized fields with opposite helicities (RCP-LCP)/2. d, Its Fourier transform. Source Data
Extended Data Fig. 1 Individual helicity measurements and difference. a,b, Measured Kerr rotation as a function of pump–probe delay for 400 nm probe pulses after sample excitation via right (RCP) (a) and left (LCP) (b) circularly polarized terahertz pump fields. c, Difference of the responses from circularly polarized fields with opposite helicities (RCP-LCP)/2. d, Its Fourier transform. Source DataCC BY · PubMed Central
Extended Data Fig. 2 Electro-optical sampling data of the circularly polarized terahertz fields. a,b, Recorded temporal traces. c,d, Their Fourier transforms. The measurements were performed using a 50-μm-thick GaP crystal cut along the 110 crystallographic direction, and the broadband pulse was filtered by means of a 3 THz filter with approximately 10% bandwidth, as described in the Methods. The two components Ex and Ey of the electric field are shown with red (left circular polarization, LCP) and violet (right circular polarization, RCP) solid lines. In a,b, the reflected terahertz field from the back side of the GaP crystal starts to interfere with the direct beam at approximately t = 3.8 ps. This complicates the electro-optic sampling data presented here, but it has no importance in all measurements on the STO crystal presented in the main text. In STO, the large terahertz absorption suppresses the back-side reflection below the experimental noise level. Source Data
Extended Data Fig. 2 Electro-optical sampling data of the circularly polarized terahertz fields. a,b, Recorded temporal traces. c,d, Their Fourier transforms. The measurements were performed using a 50-μm-thick GaP crystal cut along the 110 crystallographic direction, and the broadband pulse was filtered by means of a 3 THz filter with approximately 10% bandwidth, as described in the Methods. The two components Ex and Ey of the electric field are shown with red (left circular polarization, LCP) and violet (right circular polarization, RCP) solid lines. In a,b, the reflected terahertz field from the back side of the GaP crystal starts to interfere with the direct beam at approximately t = 3.8 ps. This complicates the electro-optic sampling data presented here, but it has no importance in all measurements on the STO crystal presented in the main text. In STO, the large terahertz absorption suppresses the back-side reflection below the experimental noise level. Source DataCC BY · PubMed Central
Extended Data Fig. 3 Stokes parameters in the frequency domain. a, Stokes parameters extracted from the LCP pump trace. b, Stokes parameters extracted from the RCP pump trace. The polarization state can be described by these four parameters: S0 represents the intensity, S1 and S2 are associated with linear polarization along two sets of orthogonal axes, and S3 is associated with circular polarization. c, Table collecting the Stokes parameters integrated in a 0.5 THz range around the main peaks in a,b. The (S3^(*)/S0^(*))² quantity can be considered as an indication of the average amount of circular polarization, and it takes a value of 1 for ideal circularly polarized light. Source Data
Extended Data Fig. 3 Stokes parameters in the frequency domain. a, Stokes parameters extracted from the LCP pump trace. b, Stokes parameters extracted from the RCP pump trace. The polarization state can be described by these four parameters: S0 represents the intensity, S1 and S2 are associated with linear polarization along two sets of orthogonal axes, and S3 is associated with circular polarization. c, Table collecting the Stokes parameters integrated in a 0.5 THz range around the main peaks in a,b. The (S3^(*)/S0^(*))² quantity can be considered as an indication of the average amount of circular polarization, and it takes a value of 1 for ideal circularly polarized light. Source DataCC BY · PubMed Central
Extended Data Fig. 4 Complex permittivity and refractive index for STO in the terahertz regime. a, Complex permittivity of STO at T = 300 K used for the simulations. The functional dependence was found assuming a Lorentz oscillator with linewidth and oscillator strength taken from ref. 55, while the resonance frequency was matched with the experimental soft phonon frequency of ref. 17 and listed in Extended Data Table 1. b, Temperature dependence of the real and imaginary parts of the refractive index in STO at 3 THz, and corresponding penetration depth ldecay. All values were estimated considering the dielectric function plotted in a and properly shifted to take into account the variation of the dielectric function with temperature. Source Data
Extended Data Fig. 4 Complex permittivity and refractive index for STO in the terahertz regime. a, Complex permittivity of STO at T = 300 K used for the simulations. The functional dependence was found assuming a Lorentz oscillator with linewidth and oscillator strength taken from ref. 55, while the resonance frequency was matched with the experimental soft phonon frequency of ref. 17 and listed in Extended Data Table 1. b, Temperature dependence of the real and imaginary parts of the refractive index in STO at 3 THz, and corresponding penetration depth ldecay. All values were estimated considering the dielectric function plotted in a and properly shifted to take into account the variation of the dielectric function with temperature. Source DataCC BY · PubMed Central
Extended Data Fig. 5 Magneto-optical Faraday effect in STO at 400 nm. Faraday rotation experienced by the transmitted 400 nm probe beam at normal incidence when a magnetic field is applied in the direction of the probe propagation (that is, perpendicularly to the sample surface). The measurements were performed with a balanced detection scheme equipped with a half-wave plate, and the P and S polarization directions were defined by the Wollaston prism. After switching the probe polarization from P to S, the same balancing orientation for the half-wave plate was maintained, in order to ensure consistency between measurements. The solid lines represent linear fits to the data, which allow us to estimate an average Verdet constant of approx. 180 rad m−1 T−1. The change of sign when the polarization is switched from P to S is consistent with a magnetic origin of the signal. Source Data
Extended Data Fig. 5 Magneto-optical Faraday effect in STO at 400 nm. Faraday rotation experienced by the transmitted 400 nm probe beam at normal incidence when a magnetic field is applied in the direction of the probe propagation (that is, perpendicularly to the sample surface). The measurements were performed with a balanced detection scheme equipped with a half-wave plate, and the P and S polarization directions were defined by the Wollaston prism. After switching the probe polarization from P to S, the same balancing orientation for the half-wave plate was maintained, in order to ensure consistency between measurements. The solid lines represent linear fits to the data, which allow us to estimate an average Verdet constant of approx. 180 rad m−1 T−1. The change of sign when the polarization is switched from P to S is consistent with a magnetic origin of the signal. Source DataCC BY · PubMed Central
Extended Data Fig. 6 Measured polarization rotation in STO at 400 nm and 800 nm probe wavelengths. a, Fourier transform of the measured Faraday rotation trace with a probe wavelength of 400 nm (solid blue curve), compared with the spectrum of the product of the two components Ex and Ey of the incident circular pump field (filled yellow area). b, Fourier transform of the measured Faraday rotation trace with a probe wavelength of 800 nm (solid red curve), corresponding to a photon energy of 1.55 eV, less than half of the direct bandgap in STO. Source Data
Extended Data Fig. 6 Measured polarization rotation in STO at 400 nm and 800 nm probe wavelengths. a, Fourier transform of the measured Faraday rotation trace with a probe wavelength of 400 nm (solid blue curve), compared with the spectrum of the product of the two components Ex and Ey of the incident circular pump field (filled yellow area). b, Fourier transform of the measured Faraday rotation trace with a probe wavelength of 800 nm (solid red curve), corresponding to a photon energy of 1.55 eV, less than half of the direct bandgap in STO. Source DataCC BY · PubMed Central
Extended Data Fig. 7 Response of STO to circularly and linearly polarized pump pulses. a, Measured Kerr rotation signals for different pump helicities. The blue solid line shows the difference of the Kerr rotation signal between right (RCP) and left (LCP) circularly polarized terahertz fields. The black solid line is the Kerr rotation measured with a linearly polarized pump field of the same amplitude. b, Simulated Kerr rotation considering only the electronic Kerr effect (EKE) nonlinear contribution, as discussed in the Methods. Both the simulated signals were rescaled by the same factor in order to reproduce the measured amplitude of the experimental linear signal, for which the dynamical multiferroicity effect is not present. c, Difference between the experimental and simulated Kerr rotation for the circularly polarized pump case. See Methods for details. Source Data
Extended Data Fig. 7 Response of STO to circularly and linearly polarized pump pulses. a, Measured Kerr rotation signals for different pump helicities. The blue solid line shows the difference of the Kerr rotation signal between right (RCP) and left (LCP) circularly polarized terahertz fields. The black solid line is the Kerr rotation measured with a linearly polarized pump field of the same amplitude. b, Simulated Kerr rotation considering only the electronic Kerr effect (EKE) nonlinear contribution, as discussed in the Methods. Both the simulated signals were rescaled by the same factor in order to reproduce the measured amplitude of the experimental linear signal, for which the dynamical multiferroicity effect is not present. c, Difference between the experimental and simulated Kerr rotation for the circularly polarized pump case. See Methods for details. Source DataCC BY · PubMed Central
Extended Data Fig. 8 Phonon dispersion curves of cubic STO. The curves were calculated based on the harmonic approximation (dashed lines) and the self-consistent phonon theory at 300 K (solid lines). The experimental inelastic neutron scattering data18 are also shown for comparison (open symbols). Source Data
Extended Data Fig. 8 Phonon dispersion curves of cubic STO. The curves were calculated based on the harmonic approximation (dashed lines) and the self-consistent phonon theory at 300 K (solid lines). The experimental inelastic neutron scattering data18 are also shown for comparison (open symbols). Source DataCC BY · PubMed Central

Verification

Claims the paper makes

25 Valid · 2 Not valid · 10 Not checked · 50 Own results and interpretations

37 more claims · 6 with their cited sources checked

Create a free account to see all 87 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 24
  • It may state two separate claims as one. 29

Create a free account to see these claims.

Citations

Cites

Show all 70 references

Research works printed but not linked: 2

  1. Dzyaloshinskii, I. E. Thermodynamic theory of ‘weak’ ferromagnetism in antiferromagnetic substances. Sov. J. Exp. Theor. Phys. 5, 1259–1272 (1957).
  2. Born, M. & Wolf, E. Principles of Optics (Cambridge Univ. Press, 1999).

Cited by

See all 143

Metadata

Authors
Basini, M., Pancaldi, M., Wehinger, B., Udina, M., Unikandanunni, V., Tadano, T., Hoffmann, M. C., Balatsky, A. V., & Bonetti, S.
Affiliations
  • Stockholm University (SE)
  • Ca' Foscari University of Venice (IT)
  • Sapienza University of Rome (IT)
  • National Institute for Materials Science (JP)
  • SLAC National Accelerator Laboratory (US)
  • Nordic Institute for Theoretical Physics (SE)
Corresponding author
Bonetti, S.
Venue
Nature
Published
2024-04-10
Volume
628
Issue
8008
Pages
534-539
ISSN
  • 0028-0836 (ISSN-L)
  • 1476-4687
OpenAlex
W4394675913
Cited by
143
References
70
Citations by year
2026: 51 · 2025: 65 · 2024: 26
FWCI
11.06
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • IRIS Research product catalog (Sapienza University of Rome) (submittedVersion, cc-by)
  • ARCA (Università Ca' Foscari Venezia) (submittedVersion, other-oa)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion, other-oa)
  • NIMS Materials Data Repository (submittedVersion, cc-by)
Funders
  • University of Connecticut
  • European Commission (951215, 810451)
  • Knut och Alice Wallenbergs Stiftelse (2017.0158, 2019.0068)
  • Stockholms Universitet
  • Japan Society for the Promotion of Science (21K03424)
Topics
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Multiferroics and related materials
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic and transport properties of perovskites and related materials
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Advanced Condensed Matter Physics
Keywords
SrTiO3, terahertz electric field, soft mode, circularly polarized light, time-resolved magneto-optical Kerr effect, room-temperature magnetization, self-consistent phonon theory, coupled nonlinear oscillators, Einstein-de Haas effect, Barnett effect, ultrafast magnetic switching, lattice vibrations

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Terahertz electric-field-driven dynamical multiferroicity in SrTiO3. https://app.cochat.ai/papers/10.1038/s41586-024-07175-9
The paper
Basini, M., Pancaldi, M., Wehinger, B., Udina, M., Unikandanunni, V., Tadano, T., Hoffmann, M. C., Balatsky, A. V., & Bonetti, S. (2024). Terahertz electric-field-driven dynamical multiferroicity in SrTiO3. Nature. https://doi.org/10.1038/s41586-024-07175-9

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.