Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 25 of the 27 references it cites were found in a registry or an index.

A cadaver-based biomechanical model of acetabulum reaming for surgical virtual reality training simulators

Open access

Abstract

Total hip arthroplasty (THA) is a highly successful surgical procedure, but complications remain, including aseptic loosening, early dislocation and misalignment. These may partly be related to lacking training opportunities for novices or those performing THA less frequently. A standardized training setting with realistic haptic feedback for THA does not exist to date. Virtual Reality (VR) may help establish THA training scenarios under standardized settings, morphology and material properties. This work summarizes the development and acquisition of mechanical properties on hip reaming, resulting in a tissue-based material model of the acetabulum for force feedback VR hip reaming simulators. With the given forces and torques occurring during the reaming, Cubic Hermite Spline interpolation seemed the most suitable approach to represent the nonlinear force–displacement behavior of the acetabular tissues over Cubic Splines. Further, Cubic Hermite Splines allowed for a rapid force feedback computation below the 1 ms hallmark. The Cubic Hermite Spline material model was implemented using a three-dimensional-sphere packing model. The resulting forces were delivered via a human–machine-interaction certified KUKA iiwa robotic arm used as a force feedback device. Consequently, this novel approach presents a concept to obtain mechanical data from high-force surgical interventions as baseline data for material models and biomechanical considerations; this will allow THA surgeons to train with a variety of machining hardness levels of acetabula for haptic VR acetabulum reaming.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41598-020-71499-5

Cites

25 of 25 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Reaming of the acetabulum during the hip surgery. The operating surgeon (on the left) uses a reaming tool to remove cartilage from the acetabulum of a left sided hip joint. Retractors hold open the surgical site, facilitated by two assisting surgeons (hands on the right).
Figure 1 Reaming of the acetabulum during the hip surgery. The operating surgeon (on the left) uses a reaming tool to remove cartilage from the acetabulum of a left sided hip joint. Retractors hold open the surgical site, facilitated by two assisting surgeons (hands on the right).CC BY · PubMed Central
Figure 2 Experimental setup (left) showing the mounted specimen in a bi-axial testing machine and the reamer mounted above. Reaming tools of matching sizes were used for each of the specimens. The insert shows a right sided innominate bone. The explosion view on the right top shows the hand piece of the reaming tool and a customized fixture to attach it to the bi-axial testing machine. Bottom right shows the top view of the acetabular region of a right sided innominate bone mounted in a mold prior to the reaming experiments. The cartilage is depicted in pink.
Figure 2 Experimental setup (left) showing the mounted specimen in a bi-axial testing machine and the reamer mounted above. Reaming tools of matching sizes were used for each of the specimens. The insert shows a right sided innominate bone. The explosion view on the right top shows the hand piece of the reaming tool and a customized fixture to attach it to the bi-axial testing machine. Bottom right shows the top view of the acetabular region of a right sided innominate bone mounted in a mold prior to the reaming experiments. The cartilage is depicted in pink.CC BY · PubMed Central
Figure 3 Force (F) and Torque (T) applied to the reaming tool during the tests.
Figure 3 Force (F) and Torque (T) applied to the reaming tool during the tests.CC BY · PubMed Central
Figure 4 Raw and filtered force and torque measurements as well as the frequency spectrum displacement for sample 18, set Dynamic 1, feed rate 0.01 mm/s.
Figure 4 Raw and filtered force and torque measurements as well as the frequency spectrum displacement for sample 18, set Dynamic 1, feed rate 0.01 mm/s.CC BY · PubMed Central
Figure 5 Force and torque after the filtering and the normalization with respect to the vertical displacement for sample 18, set Dynamic 1, feed rate 0.01 mm/s.
Figure 5 Force and torque after the filtering and the normalization with respect to the vertical displacement for sample 18, set Dynamic 1, feed rate 0.01 mm/s.CC BY · PubMed Central
Figure 6 Maximum, minimum and average forces and torques for the test set Static (a), Dynamic 1 (b) and Dynamic 2 (c).
Figure 6 Maximum, minimum and average forces and torques for the test set Static (a), Dynamic 1 (b) and Dynamic 2 (c).CC BY · PubMed Central
Figure 7 Piecewise Cubic interpolation of the maximum force feedback for the test set Dynamic 1 based on Cubic Spline (a) and Cubic Hermite Spline (b), and comparison between the interpolation techniques (c) in the case of 12 interpolation nodes.
Figure 7 Piecewise Cubic interpolation of the maximum force feedback for the test set Dynamic 1 based on Cubic Spline (a) and Cubic Hermite Spline (b), and comparison between the interpolation techniques (c) in the case of 12 interpolation nodes.CC BY · PubMed Central
Figure 8 Example of a volumetric model of the acetabulum filled with spheres, which is used to calculate the force feedback given by the Virtual Reality simulator. The usage of spheres allows a fast computation of the force feedback.
Figure 8 Example of a volumetric model of the acetabulum filled with spheres, which is used to calculate the force feedback given by the Virtual Reality simulator. The usage of spheres allows a fast computation of the force feedback.CC BY · PubMed Central
Figure 9 The Virtual Reality acetabulum reaming simulator, where the developed real-time material model is used to simulate the interactional forces and torques between the reamer and the acetabulum.
Figure 9 The Virtual Reality acetabulum reaming simulator, where the developed real-time material model is used to simulate the interactional forces and torques between the reamer and the acetabulum.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 27 references

Research works printed but not linked: 3

  1. Erdogan, K. Spline interpolation techniques. J. Tech. Sci. Technol. 2, 47–52 (2014).
  2. (VR) 1002-1003 (IEEE, New York, 2019).
  3. (VR) 607-608 (IEEE, New York, 2018).

Cited by

See all 20

Metadata

Authors
Pelliccia, L., Lorenz, M., Heyde, C.-E., Kaluschke, M., Klimant, P., Knopp, S., Schleifenbaum, S., Rotsch, C., Weller, R., Werner, M., Zachmann, G., Zajonz, D., & Hammer, N.
Affiliations
  • Chemnitz University of Technology (DE)
  • Medical University of Graz (AT)
  • University Hospital Leipzig (DE)
  • University of Bremen (DE)
  • Fraunhofer Institute for Machine Tools and Forming Technology (DE)
Corresponding author
Hammer, Niels
Venue
Scientific Reports
Published
2020-09-03
Volume
10
Issue
1
Pages
14545-14545
ISSN
2045-2322 (ISSN-L)
OpenAlex
W3081768073
Cited by
20
References
27
Citations by year
2026: 3 · 2025: 4 · 2024: 5 · 2023: 3 · 2022: 3 · 2021: 2
FWCI
1.83
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) (submittedVersion, other-oa)
  • Fraunhofer-Publica (Fraunhofer-Gesellschaft) (submittedVersion)
  • Qucosa (Saxon State and University Library Dresden) (submittedVersion, cc-by)
Funders
Projekt DEAL
Topics
  • Health Sciences › Medicine › Surgery › Surgical Simulation and Training
  • Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
  • Health Sciences › Medicine › Surgery › Orthopaedic implants and arthroplasty
Keywords
total hip arthroplasty, surgical training simulator, virtual surgery, haptic feedback, force feedback, force-displacement behavior
MeSH terms
Virtual Reality, Acetabulum, Biomechanical Phenomena, Computer Simulation, Hip Prosthesis, Humans, Arthroplasty, Replacement, Hip

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A cadaver-based biomechanical model of acetabulum reaming for surgical virtual reality training simulators. https://app.cochat.ai/papers/10.1038/s41598-020-71499-5
The paper
Pelliccia, L., Lorenz, M., Heyde, C.-E., Kaluschke, M., Klimant, P., Knopp, S., Schleifenbaum, S., Rotsch, C., Weller, R., Werner, M., Zachmann, G., Zajonz, D., & Hammer, N. (2020). A cadaver-based biomechanical model of acetabulum reaming for surgical virtual reality training simulators. Scientific Reports. https://doi.org/10.1038/s41598-020-71499-5

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.