The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
3D Printable Graphene Composite
Open accessAbstract
In human being’s history, both the Iron Age and Silicon Age thrived after a matured massive processing technology was developed. Graphene is the most recent superior material which could potentially initialize another new material Age. However, while being exploited to its full extent, conventional processing methods fail to provide a link to today’s personalization tide. New technology should be ushered in. Three-dimensional (3D) printing fills the missing linkage between graphene materials and the digital mainstream. Their alliance could generate additional stream to push the graphene revolution into a new phase. Here we demonstrate for the first time, a graphene composite, with a graphene loading up to 5.6 wt%, can be 3D printable into computer-designed models. The composite’s linear thermal coefficient is below 75 ppm·°C−1 from room temperature to its glass transition temperature (Tg), which is crucial to build minute thermal stress during the printing process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Self-citationRaman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Self-citationProcessable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Self-citationGraphene-Based Ultracapacitors
Stoller, M. D., Park, S., Zhu, Y., An, J., & Ruoff, R. S. (2008) · Nano Letters · doi:10.1021/nl802558y · Cited by 8,373
Introduction to Percolation Theory
Stauffer, D., Aharony, A., & Redner, S. (1993) · Physics Today · doi:10.1063/1.2808877 · Cited by 6,666
Huang, X., Qi, X., Boey, F., & Zhang, H. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15078b · Cited by 3,837
Functionalized graphene sheets for polymer nanocomposites
Ramanathan, T., Abdala, A. A., Stankovich, S., Dikin, D. A., Herrera-Alonso, M., Piner, R. D., Adamson, D. H., Schniepp, H. C., Chen, X., Ruoff, R. S., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.96 · Cited by 3,470
Graphene/Polymer Nanocomposites
Kim, H., Abdala, A. A., & Macosko, C. W. (2010) · Macromolecules · doi:10.1021/ma100572e · Cited by 3,406
Graphene Oxide Dispersions in Organic Solvents
Paredes, J. I., Villar-Rodil, S., Martínez-Alonso, A., & Tascón, J. M. D. (2008) · Langmuir · doi:10.1021/la801744a · Cited by 2,804
Electronic Transport Properties of Individual Chemically Reduced Graphene Oxide Sheets
Gómez-Navarro, C., Weitz, R. T., Bittner, A. M., Scolari, M., Mews, A., Burghard, M., & Kern, K. (2007) · Nano Letters · doi:10.1021/nl072090c · Cited by 2,389
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Mattevi, C., Eda, G., Agnoli, S., Miller, S., Mkhoyan, K. A., Celik, O., Mastrogiovanni, D., Granozzi, G., Garfunkel, E., & Chhowalla, M. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900166 · Cited by 1,723
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Tunable Electrical Conductivity of Individual Graphene Oxide Sheets Reduced at “Low” Temperatures
Jung, I., Dikin, D. A., Piner, R. D., & Ruoff, R. S. (2008) · Nano Letters · doi:10.1021/nl8019938 · Cited by 896
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Atomic force microscopy as a multifunctional molecular toolbox in nanobiotechnology
Müller, D. J., & Dufrêne, Y. F. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.100 · Cited by 752
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
Vadukumpully, S., Paul, J., Mahanta, N., & Valiyaveettil, S. (2011) · Carbon · doi:10.1016/j.carbon.2010.09.004 · Cited by 561
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Electrical applications of carbon materials
Chung, D. D. L. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000021439.18202.ea · Cited by 314
Graphite Oxide Flame-Retardant Polymer Nanocomposites
Higginbotham, A. L., Lomeda, J. R., Morgan, A. B., & Tour, J. M. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am900419m · Cited by 268
Graphene/polymer composites for energy applications
Sun, Y., & Shi, G. (2013) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23226 · Cited by 265
Ramanathan, T., Stankovich, S., Dikin, D. A., Liu, H., Shen, H., Nguyen, S. T., & Brinson, L. C. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21187 · Cited by 263
Graphene Chemistry: Synthesis and Manipulation
Sun, Z., James, D. K., & Tour, J. M. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz201000a · Cited by 259
Self-citation3D printing technique applied to rapid casting
Bassoli, E., Gatto, A., Iuliano, L., & Grazia Violante, M. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710750898 · Cited by 253
AC and DC percolative conductivity of single wall carbon nanotube polymer composites
McLachlan, D. S., Chiteme, C., Park, C., Wise, K. E., Lowther, S. E., Lillehei, P. T., Siochi, E. J., & Harrison, J. S. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20597 · Cited by 235
Yang, H., Shan, C., Li, F., Zhang, Q., Han, D., & Niu, L. (2009) · Journal of Materials Chemistry · doi:10.1039/b915228h · Cited by 193
3D-printed devices for continuous-flow organic chemistry
Dragone, V., Sans, V., Rosnes, M. H., Kitson, P. J., & Cronin, L. (2013) · Beilstein Journal of Organic Chemistry · doi:10.3762/bjoc.9.109 · Cited by 174
Xu, Q. F., Mondal, B., & Lyons, A. M. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200741f · Cited by 158
Nanocarbon based ionic actuators—a review
Kosidlo, U., Omastová, M., Mičušík, M., Ćirić‐Marjanović, G., Randriamahazaka, H. N., Wallmersperger, T., Aabloo, A., Kolaric, I., & Bauernhansl, T. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/10/104022 · Cited by 123
Cited by
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Self-citationRecent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Gnanasekaran, K., Heijmans, T., van Bennekom, S., Woldhuis, H., Wijnia, S., de With, G., & Friedrich, H. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.04.003 · Cited by 594
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Metadata
- Authors
- Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z.
- Venue
- Scientific Reports
- Published
- 2015-07-08
- Volume
- 5
- Issue
- 1
- Pages
- 11181-11181
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W856126711
- Cited by
- 481
- References
- 36
- FWCI
- 32.78
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.