The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Abstract
Inkjet printing is an attractive patterning technology, which has become increasingly accepted for a variety of industrial and scientific applications. This review primarily presents an overview of the investigations that have been conducted since 2003 into inkjet-printing polymers or metal-containing inks and mentions related activities. The first section discusses the droplet-formation process in piezoelectric drop-on-demand printheads and the physical properties that affect droplet formation and the resolution of inkjet-printed features. The second section deals with the issues that arise from printing polymers, such as printability and the output characteristics of devices made by this route. Finally, the challenges and achievements attached to inkjet printing metal-containing inks are discussed before concluding with a few remarks about the future of the field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Contact line deposits in an evaporating drop
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (2000) · Physical Review E · doi:10.1103/physreve.62.756 · Cited by 2,300
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Self-citationMarangoni Effect Reverses Coffee-Ring Depositions
Hu, H., & Larson, R. G. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0609232 · Cited by 1,645
Pattern formation in drying drops
Deegan, R. D. (2000) · Physical Review E · doi:10.1103/physreve.61.475 · Cited by 1,297
Drop Splashing on a Dry Smooth Surface
Xu, L., Zhang, W. W., & Nagel, S. R. (2005) · Physical Review Letters · doi:10.1103/physrevlett.94.184505 · Cited by 791
Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets
Fromm, J. E. (1984) · IBM Journal of Research and Development · doi:10.1147/rd.283.0322 · Cited by 601
Ink-jet printed nanoparticle microelectromechanical systems
Fuller, S. B., Wilhelm, E. J., & Jacobson, J. M. (2002) · Journal of Microelectromechanical Systems · doi:10.1109/84.982863 · Cited by 594
Inkjet printing of nanosized silver colloids
Lee, H.-H., Chou, K.-S., & Huang, K.-C. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/074 · Cited by 586
Cited by
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
Tobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Efficiency Roll‐Off in Organic Light‐Emitting Diodes
Murawski, C., Leo, K., & Gather, M. C. (2013) · Advanced Materials · doi:10.1002/adma.201301603 · Cited by 1,153
Shape memory polymers: Past, present and future developments
Hager, M. D., Bode, S., Weber, C., & Schubert, U. S. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.002 · Cited by 950
Self-citationRegenerative medicine: Current therapies and future directions
Mao, A. S., & Mooney, D. J. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1508520112 · Cited by 941
Quantum‐Dot Light‐Emitting Diodes for Large‐Area Displays: Towards the Dawn of Commercialization
Dai, X., Deng, Y., Peng, X., & Jin, Y. (2017) · Advanced Materials · doi:10.1002/adma.201607022 · Cited by 859
Recent Developments in the Application of Phosphorescent Iridium(III) Complex Systems
Ulbricht, C., Beyer, B., Friebe, C., Winter, A., & Schubert, U. S. (2009) · Advanced Materials · doi:10.1002/adma.200803537 · Cited by 746
Self-citationPerelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Self-citationPrintable Transparent Conductive Films for Flexible Electronics
Li, D., Lai, W., Zhang, Y., & Huang, W. (2018) · Advanced Materials · doi:10.1002/adma.201704738 · Cited by 714
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Abdollahi, A., Roghani-Mamaqani, H., Razavi, B., & Salami-Kalajahi, M. (2020) · ACS Nano · doi:10.1021/acsnano.0c07289 · Cited by 643
Mechanisms, Capabilities, and Applications of High‐Resolution Electrohydrodynamic Jet Printing
Onses, M. S., Sutanto, E., Ferreira, P. M., Alleyne, A. G., & Rogers, J. A. (2015) · Small · doi:10.1002/smll.201500593 · Cited by 603
Wang, H.-X., Li, M., Lee, C. M., Chakraborty, S., Kim, H.-W., Bao, G., & Leong, K. W. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00799 · Cited by 560
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
Kumar, P., Singh, S., & Gupta, B. K. (2016) · Nanoscale · doi:10.1039/c5nr06965c · Cited by 529
Inkjet printing of conductive materials: a review
Cummins, G., & Desmulliez, M. P. Y. (2012) · Circuit World · doi:10.1108/03056121211280413 · Cited by 504
Paper‐Based Inkjet‐Printed Microfluidic Analytical Devices
Yamada, K., Henares, T. G., Suzuki, K., & Citterio, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411508 · Cited by 501
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects
Kačarević, Ž. P., Rider, P. M., Alkildani, S., Retnasingh, S., Smeets, R., Jung, O., Ivanišević, Z., & Barbeck, M. (2018) · Materials · doi:10.3390/ma11112199 · Cited by 479
Low-Cost Inorganic Solar Cells: From Ink To Printed Device
Habas, S. E., Platt, H. A. S., van Hest, M. F. A. M., & Ginley, D. S. (2010) · Chemical Reviews · doi:10.1021/cr100191d · Cited by 459
Materials and Devices toward Fully Solution Processable Organic Light-Emitting Diodes
Zhong, C., Duan, C., Huang, F., Wu, H., & Cao, Y. (2011) · Chemistry of Materials · doi:10.1021/cm101937p · Cited by 436
Zhang, X., Richter, L. J., DeLongchamp, D. M., Kline, R. J., Hammond, M. R., McCulloch, I., Heeney, M., Ashraf, R. S., Smith, J. N., Anthopoulos, T. D., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja204515s · Cited by 402
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Wen, Y., & Xu, J. (2017) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.28482 · Cited by 378
Schubert, S., Delaney, Jr., & Schubert, U. S. (2011) · Soft Matter · doi:10.1039/c0sm00862a · Cited by 375
Self-citationZhang, L., Wu, J., Hedhili, M. N., Yang, X., & Wang, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05862c · Cited by 347
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
Wünscher, S., Abbel, R., Perelaer, J., & Schubert, U. S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01820f · Cited by 278
Self-citationTeichler, A., Perelaer, J., & Schubert, U. S. (2013) · Journal of Materials Chemistry C · doi:10.1039/c2tc00255h · Cited by 271
Self-citationArgon plasma sintering of inkjet printed silver tracks on polymer substrates
Reinhold, I., Hendriks, C. E., Eckardt, R., Kranenburg, J. M., Perelaer, J., Baumann, R. R., & Schubert, U. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b823329b · Cited by 259
Self-citationHoch, E., Hirth, T., Tovar, G. E. M., & Borchers, K. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20745e · Cited by 255
Metadata
- Authors
- Tekin, E., Smith, P. J., & Schubert, U. S.
- Venue
- Soft Matter
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2008
- Volume
- 4
- Issue
- 4
- Pages
- 703
- ISSN
- 1744-683X (ISSN-L)
- 1744-6848
- OpenAlex
- W2161121544
- Cited by
- 807
- References
- 26
- FWCI
- 28.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.