The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Efficient process for conversion of fructose to 5-hydroxymethylfurfural with ionic liquids
Abstract
An efficient process for the dehydration of fructose into 5-hydroxymethylfurfural (5-HMF) in ionic liquid 1-butyl-3-methyl imidazolium chloride ([BMIM][Cl]) by using a sulfonic ion-exchange resin as catalyst was developed. A fructose conversion of 98.6% with a 5-HMF yield of 83.3% was achieved in 10 min reaction time at 80 °C. When the reaction temperature was increased to 120 °C, a 5-HMF yield of 82.2% was obtained in only 1 min for essentially 100% fructose conversion. No large decrease in 5-HMF selectivity occurred for initial fructose concentrations of up to 20 wt.%. Water content of up to 5% in the [BMIM][Cl] had no effect on the fructose conversion rate and 5-HMF yield, but water content higher than 5 wt.% led to lower conversions and yields. The ionic liquid and sulfonic ion-exchange resin could be recycled and exhibited constant activity for 7 successive trials. The proposed process of using an ionic liquid with ion-exchange resin catalyst greatly reduces the reaction time required over previous works for converting fructose to 5-HMF.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Chlorides in Ionic Liquid Solvents Convert Sugars to 5-Hydroxymethylfurfural
Zhao, H., Holladay, J. E., Brown, H., & Zhang, Z. C. (2007) · Science · doi:10.1126/science.1141199 · Cited by 1,997
Production of Liquid Alkanes by Aqueous-Phase Processing of Biomass-Derived Carbohydrates
Huber, G. W., Chheda, J. N., Barrett, C. J., & Dumesic, J. A. (2005) · Science · doi:10.1126/science.1111166 · Cited by 1,678
Phase Modifiers Promote Efficient Production of Hydroxymethylfurfural from Fructose
Román-Leshkov, Y., Chheda, J. N., & Dumesic, J. A. (2006) · Science · doi:10.1126/science.1126337 · Cited by 1,670
Peer Reviewed: Design Through the 12 Principles of Green Engineering
Anastas, P. T., & Zimmerman, J. B. (2003) · Environmental Science & Technology · doi:10.1021/es032373g · Cited by 1,273
Chheda, J. N., Román-Leshkov, Y., & Dumesic, J. A. (2007) · Green Chem. · doi:10.1039/b611568c · Cited by 1,175
5‐Hydroxymethylfurfural (HMF). A Review Focussing on its Manufacture
Kuster, B. F. M. (1990) · Starch - Stärke · doi:10.1002/star.19900420808 · Cited by 684
Acid-Catalyzed Production of 5-Hydroxymethyl Furfural from d-Fructose in Subcritical Water
Salak Asghari, F., & Yoshida, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051088y · Cited by 500
Synthesis, chemistry and applications of 5-hydroxymethyl-furfural and its derivatives
Lewkowski, J. (2001) · Arkivoc · doi:10.3998/ark.5550190.0002.102 · Cited by 496
Yong, G., Zhang, Y., & Ying, J. Y. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200803207 · Cited by 430
Dehydration of fructose to 5-hydroxymethylfurfural over H-mordenites
Moreau, C., Durand, R., Razigade, S., Duhamet, J., Faugeras, P., Rivalier, P., Ros, P., & Avignon, G. (1996) · Applied Catalysis A: General · doi:10.1016/0926-860x(96)00136-6 · Cited by 413
Cited by
Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources
van Putten, R.-J., van der Waal, J. C., de Jong, E., Rasrendra, C. B., Heeres, H. J., & de Vries, J. G. (2013) · Chemical Reviews · doi:10.1021/cr300182k · Cited by 2,886
Conversion of biomass to selected chemical products
Gallezot, P. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15147a · Cited by 2,552
Rosatella, A. A., Simeonov, S. P., Frade, R. F. M., & Afonso, C. A. M. (2011) · Green Chemistry · doi:10.1039/c0gc00401d · Cited by 1,652
Zakrzewska, M. E., Bogel-Łukasik, E., & Bogel-Łukasik, R. (2011) · Chemical Reviews · doi:10.1021/cr100171a · Cited by 800
Recent advances in ionic liquid catalysis
Zhang, Q., Zhang, S., & Deng, Y. (2011) · Green Chemistry · doi:10.1039/c1gc15334j · Cited by 717
Wang, T., Nolte, M. W., & Shanks, B. H. (2014) · Green Chem. · doi:10.1039/c3gc41365a · Cited by 596
Converting carbohydrates to bulk chemicals and fine chemicals over heterogeneous catalysts
Climent, M. J., Corma, A., & Iborra, S. (2011) · Green Chemistry · doi:10.1039/c0gc00639d · Cited by 574
Advances in 5-hydroxymethylfurfural production from biomass in biphasic solvents
Saha, B., & Abu-Omar, M. M. (2014) · Green Chem. · doi:10.1039/c3gc41324a · Cited by 523
Mukherjee, A., Dumont, M.-J., & Raghavan, V. (2015) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2014.11.007 · Cited by 510
Karinen, R., Vilonen, K., & Niemelä, M. (2011) · ChemSusChem · doi:10.1002/cssc.201000375 · Cited by 442
Advances on biomass pretreatment using ionic liquids: An overview
Tadesse, H., & Luque, R. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00667j · Cited by 434
Biorefinery roadmap based on catalytic production and upgrading 5-hydroxymethylfurfural
Hou, Q., Qi, X., Zhen, M., Qian, H., Nie, Y., Bai, C., Zhang, S., Bai, X., & Ju, M. (2021) · Green Chemistry · doi:10.1039/d0gc02770g · Cited by 430
Self-citationWeingarten, R., Cho, J., Conner, Jr., & Huber, G. W. (2010) · Green Chemistry · doi:10.1039/c003459b · Cited by 408
Activation of Carbonyl-Containing Molecules with Solid Lewis Acids in Aqueous Media
Román-Leshkov, Y., & Davis, M. E. (2011) · ACS Catalysis · doi:10.1021/cs200411d · Cited by 401
Catalytic conversion of biomass-derived carbohydrates into fuels and chemicals via furanic aldehydes
Hu, L., Zhao, G., Hao, W., Tang, X., Sun, Y., Lin, L., & Liu, S. (2012) · RSC Advances · doi:10.1039/c2ra21811a · Cited by 374
Furfural – a versatile, biomass-derived platform chemical for the production of renewable chemicals
Jaswal, A., Singh, P. P., & Mondal, T. (2022) · Green Chemistry · doi:10.1039/d1gc03278j · Cited by 352
Qi, L., Mui, Y. F., Lo, S. W., Lui, M. Y., Akien, G. R., & Horváth, I. T. (2014) · ACS Catalysis · doi:10.1021/cs401160y · Cited by 307
Gandini, A. (2010) · Polym. Chem. · doi:10.1039/b9py00233b · Cited by 295
Catalytic Advances in the Production and Application of Biomass-Derived 2,5-Dihydroxymethylfuran
Hu, L., Xu, J., Zhou, S., He, A., Tang, X., Lin, L., Xu, J., & Zhao, Y. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b03530 · Cited by 289
Solid acid mediated hydrolysis of biomass for producing biofuels
Guo, F., Fang, Z., Xu, C. C., & Smith, R. L. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.04.001 · Cited by 276
De, S., Dutta, S., & Saha, B. (2011) · Green Chemistry · doi:10.1039/c1gc15550d · Cited by 267
Synthesis of 5‐(Hydroxymethyl)furfural in Ionic Liquids: Paving the Way to Renewable Chemicals
Ståhlberg, T., Fu, W., Woodley, J. M., & Riisager, A. (2011) · ChemSusChem · doi:10.1002/cssc.201000374 · Cited by 263
A review on solvent systems for furfural production from lignocellulosic biomass
Lee, C. B. T. L., & Wu, T. Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110172 · Cited by 258
Dutta, S., De, S., Alam, M. I., Abu-Omar, M. M., & Saha, B. (2012) · Journal of Catalysis · doi:10.1016/j.jcat.2011.12.017 · Cited by 254
Metadata
- Authors
- Qi, X., Watanabe, M., Aida, T. M., & Smith, Jr.
- Venue
- Green Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2009
- Volume
- 11
- Issue
- 9
- Pages
- 1327
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W2064799493
- Cited by
- 297
- References
- 27
- FWCI
- 16.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.