Influence of binder properties on kinetic and transport processes in polymer electrolyte fuel cell electrodes
The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Abstract
The objectives of this study are to estimate the contributions of kinetic, ohmic and mass transport overpotentials to the overall voltage loss in polymer electrolyte membrane fuel cell (PEMFC) electrodes and to relate these overpotentials to electrode binder properties such as ionic conductivity, ion exchange capacity (IEC) and O(2) permeability. The model electrode binders studied were perfluorosulfonic acid ionomers (PFSA; of IECs 1.35 meq g(-1) and 0.95 meq g(-1)), sulfonated poly ether ether ketone (SPEEK; of IECs 1.35, 1.75 and 2.1 meq g(-1)) and sulfonated poly sulfone (SPSU; of IEC 1.5 meq g(-1)). The O(2) permeability of these binders varied from 0.15 x 10(-12) mol cm(-1) s(-1) for SPSU to 6 x 10(-12) mol cm(-1) s(-1) for PFSA IEC 0.95 meq g(-1) at 80 degrees C and 75%RH. The electrodes prepared were characterized by cyclic voltammetry to estimate electrochemically active surface area (ECA) of platinum. Steady state polarization (V-I) experiments were performed with hydrogen as fuel and oxidants including O(2), 21% O(2)/N(2) (air), 21% O(2)/He (Helox) and 4% O(2)/N(2). The V-I data obtained was analyzed to determine the relative contributions of the different sources of polarization in the electrode. Electrodes prepared with PFSA binders had similar ECAs of 28 m(2) g(-1)-Pt, while those prepared using hydrocarbon binders had an ECA of 10 to 14 m(2) g(-1)-Pt at 80 degrees C and 75%RH. The same trend was seen in mass activity. At optimized binder loadings, a semi-quantitative relationship was obtained relating binder O(2) permeability to the mass transport losses within the electrode. Furthermore, a novel semi-quantitative method of plotting helox-air voltage gain against O(2)-air gain was employed to probe the O(2) transport limitations in the electrodes. Based on this analysis, it is suggested that the SPEEK and SPSU bound electrodes suffered from binder phase diffusion limitations in addition to gas phase diffusion limitation, while the PFSA bound electrodes predominantly exhibited gas-phase diffusion limitations.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The adsorbed ionomer and the amount, size, and configuration of non-absorbed ionomer and thus optimum I/C ratio are sensitive to the catalyst, ionomer, and solvent [23,91,120].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [120]
In the citing paper
“For example, it was observed that the optimal ionomer content in the CL is dependent on the catalyst or the EW of the ionomer [120].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [120]
Citations
Cites
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Alternative Polymer Systems for Proton Exchange Membranes (PEMs)
Hickner, M. A., Ghassemi, H., Kim, Y. S., Einsla, B. R., & McGrath, J. E. (2004) · Chemical Reviews · doi:10.1021/cr020711a · Cited by 2,834
Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers
Rikukawa, M., & Sanui, K. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00032-0 · Cited by 1,553
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Solid polymer electrolyte membranes for fuel cell applications—a review
Smitha, B., Sridhar, S., & Khan, A. A. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.01.035 · Cited by 1,216
Non-Fluorinated Polymer Materials for Proton Exchange Membrane Fuel Cells
Rozière, J., & Jones, D. J. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.154657 · Cited by 786
Parthasarathy, A., Srinivasan, S., Appleby, A. J., & Martin, C. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221258 · Cited by 687
Proton exchange membrane fuel cell from low temperature to high temperature: Material challenges
Shao, Y., Yin, G., Wang, Z., & Gao, Y. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.02.065 · Cited by 571
Recent developments in proton exchange membranes for fuel cells
Devanathan, R. (2008) · Energy & Environmental Science · doi:10.1039/b808149m · Cited by 528
Makharia, R., Mathias, M. F., & Baker, D. R. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1888367 · Cited by 514
Research works printed but not linked: 4
- Song, 2005, Electrochim. Acta, 50, 3358
- Litster, 2004, J. Power Sources, 130, 61, 10.1016/j.jpowsour.2003.12.055 · DOI · Paper page
- Song, 2006, J. Power Sources, 154, 138, 10.1016/j.jpowsour.2005.04.001 · DOI
- Xu, 2007, J. Electrochem. Soc., 154, 8
Cited by
Wang, C. R., Stansberry, J. M., Mukundan, R., Chang, H.-M. J., Kulkarni, D., Park, A. M., Plymill, A. B., Firas, N. M., Liu, C. P., Lang, J. T., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00904 · Cited by 402
Kumar, A., & Ramani, V. (2014) · ACS Catalysis · doi:10.1021/cs500116h · Cited by 190
Self-citationArges, C. G., Wang, L., Parrondo, J., & Ramani, V. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.049311jes · Cited by 104
Self-citationUnderstanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Zamel, N. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.091 · Cited by 93
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Arges, C. G., Wang, L., Jung, M.-S. J., & Ramani, V. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0361507jes · Cited by 72
Self-citationEffects of an agglomerate size distribution on the PEFC agglomerate model
Epting, W. K., & Litster, S. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.02.099 · Cited by 72
Low-Resistant Ion-Exchange Membranes for Energy Efficient Membrane Capacitive Deionization
Palakkal, V. M., Rubio, J. E., Lin, Y. J., & Arges, C. G. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01797 · Cited by 70
Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers
Kim, Y. S. (2023) · Advanced Science · doi:10.1002/advs.202303914 · Cited by 68
TiO2–RuO2 electrocatalyst supports exhibit exceptional electrochemical stability
Lo, C., Wang, G., Kumar, A., & Ramani, V. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.03.039 · Cited by 62
Self-citationEffect of interface on surface morphology and proton conduction of polymer electrolyte thin films
Ohira, A., Kuroda, S., Mohamed, H. F. M., & Tavernier, B. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51136g · Cited by 59
Bipolar polymer electrolyte interfaces for hydrogen–oxygen and direct borohydride fuel cells
Arges, C. G., Prabhakaran, V., Wang, L., & Ramani, V. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.04.099 · Cited by 56
Self-citationRuO2–SiO2 mixed oxides as corrosion-resistant catalyst supports for polymer electrolyte fuel cells
Kumar, A., & Ramani, V. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.02.015 · Cited by 55
Self-citationBoillat, P., Oberholzer, P., Kaestner, A. P., Siegrist, R., Lehmann, E. H., Scherer, G. G., & Wokaun, A. J. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.017207jes · Cited by 44
Dual-layer catalyst layers for increased proton exchange membrane fuel cell performance
Garsany, Y., Atkinson, R. W., Gould, B. D., Martin, R., Dubau, L., Chatenet, M., & Swider-Lyons, K. E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230574 · Cited by 43
Comprehensive analytical model for polarization curve of a PEM fuel cell and experimental validation
Thosar, A. U., Agarwal, H., Govarthan, S., & Lele, A. K. (2019) · Chemical Engineering Science · doi:10.1016/j.ces.2019.05.022 · Cited by 41
Strong, A., Britton, B., Edwards, D., Peckham, T. J., Lee, H.-F., Huang, W. Y., & Holdcroft, S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0251506jes · Cited by 40
Moruno, F. L., Rubio, J. E., Atanassov, P. B., Cerrato, J. M., Arges, C. G., & Santoro, C. (2018) · Bioelectrochemistry · doi:10.1016/j.bioelechem.2018.02.004 · Cited by 37
SiO2–RuO2: A Stable Electrocatalyst Support
Lo, C., & Ramani, V. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3017416 · Cited by 37
Self-citationIonomers From Kraft Lignin for Renewable Energy Applications
Farzin, S., Johnson, T. J., Chatterjee, S., Zamani, E., & Dishari, S. K. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00690 · Cited by 32
Ivanov, I. B., Ahn, Y., Poirson, T., Hickner, M. A., & Logan, B. E. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.05.089 · Cited by 32
Kim, O. ‐., Oh, S. ‐., Ahn, C. ‐., Kim, S., Kim, J. K., Kim, J., Yang, S., Choi, M., Cho, Y. ‐., & Sung, Y. ‐. (2018) · Fuel Cells · doi:10.1002/fuce.201800083 · Cited by 31
Seo, S., Woo, J., Yun, S.-H., Lee, H.-J., Park, J., Xu, T., Yang, T., Lee, J., & Moon, S. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp00662a · Cited by 29
Venugopalan, G., Bhattacharya, D., Kole, S., Ysidron, C., Angelopoulou, P. P., Σακελλαρίου, Γ., & Arges, C. G. (2021) · Materials Advances · doi:10.1039/d1ma00208b · Cited by 23
Kim, O., Ahn, C., Kang, S. Y., Kim, S., Choi, H. J., Cho, Y. ‐., & Sung, Y. (2019) · Fuel Cells · doi:10.1002/fuce.201900120 · Cited by 21
Analysis of H2/Air Polarization Curves: The Influence of Low Pt Loading and Fabrication Process
Yu, H., Bonville, L. J., & Marić, R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0261805jes · Cited by 21
Su, Z., Kole, S., Harden, L. C., Palakkal, V. M., Kim, C., Nair, G., Arges, C. G., & Renner, J. (2019) · ACS Materials Letters · doi:10.1021/acsmaterialslett.9b00173 · Cited by 21
So, S., Kang, H., Choi, D., & Oh, K.-H. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.05.128 · Cited by 20
Performance-Limiting Factors of Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers
Choi, J., Agarwal, T., Park, H., Jung, J., Uddin, A., Ahn, S. M., Klein, J. M., Lee, A. S., Lehmann, M. L., Fujimoto, C. H., et al. (2025) · ACS Energy Letters · doi:10.1021/acsenergylett.5c00487 · Cited by 20
Epting, W. K., & Litster, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.016 · Cited by 18
Dunsmore, L., Uddin, M. A., Zhang, H., Wu, G., & Litster, S. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230188 · Cited by 18
Lee, J., Ahn, Y., & Kim, D. (2019) · Macromolecular Research · doi:10.1007/s13233-019-7063-y · Cited by 16
Kumar, P., Rana, S. P. S., Sakshi, Abahussain, A. A. M., & Singh, L. (2025) · Fuel · doi:10.1016/j.fuel.2025.135020 · Cited by 15
Prest, L. E. (2011) · e-scholar@UOIT (University of Ontario Institute of Technology) · Cited by 15
Obewhere, O. A., Acurio-Cerda, K., Sutradhar, S., Dike, M., Keloth, R., & Dishari, S. K. (2024) · Chemical Communications · doi:10.1039/d4cc03221g · Cited by 13
Cha, J.-E., Cho, W. J., Hwang, J., Seo, D.-J., Choi, Y. W., & Kim, W. B. (2022) · Scientific Reports · doi:10.1038/s41598-022-18464-6 · Cited by 12
Chatterjee, S., Obewhere, O. A., Zamani, E., Keloth, R., Farzin, S., Morton, M., Sarella, A., & Dishari, S. K. (2023) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2023.101282 · Cited by 12
Kim, J., Choi, H. J., Choi, H., Kang, S. Y., Choi, H., Ahn, C., Kim, Y.-H., La, I., Kim, O., Cho, Y., et al. (2024) · Energy Technology · doi:10.1002/ente.202400445 · Cited by 9
Addressing Spacer Channel Resistances in MCDI Using Porous and Pliable Ionic Conductors
Palakkal, V. M., Jordan, M. L., Bhattacharya, D., Lin, Y. J., & Arges, C. G. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abedc4 · Cited by 9
Hyun, J., Yang, S. H., Doo, G., Lee, D. W., Oh, E., Cha, M. S., Lee, J. Y., & Kim, H. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad0a7e · Cited by 8
Investigation of Transport Mechanisms for Sulfonated Silica-Based Fuel Cell Electrode Structures
Eastcott, J. I., & Easton, E. B. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0841507jes · Cited by 8
Burba, M., Pargoletti, E., Marken, F., McKeown, N. B., Carta, M., Vertova, A., & Minguzzi, A. (2023) · ChemElectroChem · doi:10.1002/celc.202300481 · Cited by 6
Wang, S., & Weber, A. Z. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.147322 · Cited by 4
High Temperature Polymer Electrolytes for Hydrogen Fuel Cells and Electrochemical Pumps
Venugopalan, G. (2021) · Louisiana State University · doi:10.31390/gradschool_dissertations.5529 · Cited by 3
Epting, W. K., & Litster, S. (2013) · ECS Transactions · doi:10.1149/05002.0269ecst · Cited by 2
Moruno, F. L. (2018) · UNM’s Digital Repository (University of New Mexico) · Cited by 2
19F NMR Studies of 3M Ionomer Adsorption on Carbon Supports and Pt/C Catalysts
Cantillo, N. M., Li, L., Peng, J., Goenaga, G. A., & Zawodzinski, T. A. (2017) · ECS Transactions · doi:10.1149/08008.0259ecst · Cited by 1
Bimetallic thermally-regenerative ammonia batteries
Tian, H., Wang, W., Zhu, X., & Shu, G. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823690-1.00001-0 · Cited by 1
Characterizing Electrode-Level Oxygen Transport in Polymer Electrolyte Fuel Cells
Epting, W. K. (2018) · KiltHub Repository · doi:10.1184/r1/6715085
Eastcott, J. I. (2014) · e-scholar@UOIT (University of Ontario Institute of Technology)
Gopu, S. (2012) · OhioLink ETD Center (Ohio Library and Information Network)
Interfacial Engineering of Bipolar Junctions for Electrochemical Processes
Kole, S. (2021) · Louisiana State University · doi:10.31390/gradschool_dissertations.5607
Metadata
- Authors
- Sambandam, S., & Ramani, V.
- Affiliations
- Illinois Institute of Technology (US)
- Corresponding author
- Ramani, Vijay
- ORCID
- Ramani, Vijay
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 12
- Issue
- 23
- Pages
- 6140
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2035494358
- Cited by
- 49
- References
- 53
- Citations by year
- 2025: 4 · 2024: 2 · 2023: 4 · 2022: 3 · 2021: 6 · 2020: 2 · 2019: 4 · 2018: 5 · 2017: 2 · 2016: 1 · 2015: 4 · 2014: 3 · 2013: 4 · 2012: 3
- FWCI
- 2.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Physical Chemistry Chemical Physics (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, electrode binder, oxygen permeability, mass transport overpotential, ohmic overpotential, kinetic overpotential, perfluorosulfonic acid ionomer, sulfonated poly(ether ether ketone), ion exchange capacity, hydrogen oxidation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.