The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Nanoporous gold: a new material for catalytic and sensor applications
Abstract
Nanostructured materials are governed by their surface chemical properties. This is strikingly reflected by np-Au. This material can be generated by corrosion of bulk Ag-Au alloys. Based on a self-organisation process, a 3 dimensional sponge like gold structure evolves with ligaments in the range of only a few tens of nanometers. Due to its continuous porosity, the material can be penetrated by gases which then adsorb and interact with the surface. In this perspective we will review potential applications of np-Au resulting from this effect, namely heterogeneous gas phase catalysis, surface chemistry driven actuation, and adsorbate controlled stability of the nanostructure. We will summarize the current knowledge about the low temperature oxidation of CO as well as the highly selective oxidation of methanol. Furthermore, we will address the question how surface chemistry can influence the material properties itself. In particular, we will deal with (a) the actuation of np-Au by the reversible oxidation of its surface using ozone and (b) the adsorbate controlled coarsening of ligaments, using annealing experiments under ozone or inert gas atmosphere.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selective gas adsorption and separation in metal–organic frameworks
Li, J.-R., Kuppler, R. J., & Zhou, H.-C. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,932
Metal-organic framework materials as catalysts
Lee, J., Farha, O. K., Roberts, J., Scheidt, K. A., Nguyen, S. T., & Hupp, J. T. (2009) · Chemical Society Reviews · doi:10.1039/b807080f · Cited by 7,969
Towards the computational design of solid catalysts
Nørskov, J. K., Bligaard, T., Rossmeisl, J., & Christensen, C. H. (2009) · Nature Chemistry · doi:10.1038/nchem.121 · Cited by 4,161
Novel Gold Catalysts for the Oxidation of Carbon Monoxide at a Temperature far Below 0 °C
Haruta, M., Kobayashi, T., Sano, H., & Yamada, N. (1987) · Chemistry Letters · doi:10.1246/cl.1987.405 · Cited by 3,162
Evolution of nanoporosity in dealloying
Erlebacher, J., Aziz, M. J., Karma, A., Dimitrov, N., & Sieradzki, K. (2001) · Nature · doi:10.1038/35068529 · Cited by 2,753
BOND, G. C., & THOMPSON, D. T. (1999) · Catalysis Reviews · doi:10.1081/cr-100101171 · Cited by 1,728
Universality in Heterogeneous Catalysis
Nørskov, J. K., Bligaard, T., Logadottir, A., Bahn, S., Hansen, L. B., Bollinger, M., Bengaard, H., Hammer, B., Sljivancanin, Z., Mavrikakis, M., et al. (2002) · Journal of Catalysis · doi:10.1006/jcat.2002.3615 · Cited by 1,400
Nanoporous Gold Catalysts for Selective Gas-Phase Oxidative Coupling of Methanol at Low Temperature
Wittstock, A., Zielasek, V., Biener, J., Friend, C. M., & Bäumer, M. (2010) · Science · doi:10.1126/science.1183591 · Cited by 1,112
Self-citationTunable gold catalysts for selective hydrocarbon oxidation under mild conditions
Hughes, M. D., Xu, Y.-J., Jenkins, P., McMorn, P., Landon, P., Enache, D. I., Carley, A. F., Attard, G. A., Hutchings, G. J., King, F., et al. (2005) · Nature · doi:10.1038/nature04190 · Cited by 1,011
E LECTRONIC S TRUCTURE AND C ATALYSIS ON M ETAL S URFACES
Greeley, J., Nørskov, J. K., & Mavrikakis, M. (2002) · Annual Review of Physical Chemistry · doi:10.1146/annurev.physchem.53.100301.131630 · Cited by 993
HUTCHINGS, G. (1985) · Journal of Catalysis · doi:10.1016/0021-9517(85)90383-5 · Cited by 923
Gold-catalysed oxidation of carbon monoxide
Bond, G. C., & Thompson, D. T. (2000) · Gold Bulletin · doi:10.1007/bf03216579 · Cited by 914
The nature of the active site in heterogeneous metal catalysis
Nørskov, J. K., Bligaard, T., Hvolbæk, B., Abild-Pedersen, F., Chorkendorff, I., & Christensen, C. H. (2008) · Chemical Society Reviews · doi:10.1039/b800260f · Cited by 885
Ibach, H. (1997) · Surface Science Reports · doi:10.1016/s0167-5729(97)00010-1 · Cited by 846
Biodiesel made with sugar catalyst
Toda, M., Takagaki, A., Okamura, M., Kondo, J. N., Hayashi, S., Domen, K., & Hara, M. (2005) · Nature · doi:10.1038/438178a · Cited by 823
Nanoporous Gold Leaf: “Ancient Technology”/Advanced Material
Ding, Y., Kim, Y. ‐., & Erlebacher, J. (2004) · Advanced Materials · doi:10.1002/adma.200400792 · Cited by 781
Min, B. K., & Friend, C. M. (2007) · Chemical Reviews · doi:10.1021/cr050954d · Cited by 755
An Atomistic Description of Dealloying
Erlebacher, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1784820 · Cited by 637
Low Temperature CO Oxidation over Unsupported Nanoporous Gold
Xu, C., Su, J., Xu, X., Liu, P., Zhao, H., Tian, F., & Ding, Y. (2007) · Journal of the American Chemical Society · doi:10.1021/ja0675503 · Cited by 619
Surface-chemistry-driven actuation in nanoporous gold
Biener, J., Wittstock, A., Zepeda-Ruiz, L. A., Biener, M. M., Zielasek, V., Kramer, D., Viswanath, R. N., Weissmüller, J., Bäumer, M., & Hamza, A. V. (2009) · Nature Materials · doi:10.1038/nmat2335 · Cited by 542
Self-citationCharge-Induced Reversible Strain in a Metal
Weissmüller, J., Viswanath, R. N., Kramer, D., Zimmer, P., Würschum, R., & Gleiter, H. (2003) · Science · doi:10.1126/science.1081024 · Cited by 525
Gold Catalysts: Nanoporous Gold Foams
Zielasek, V., Jürgens, B., Schulz, C., Biener, J., Biener, M. M., Hamza, A. V., & Bäumer, M. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200602484 · Cited by 513
Self-citationSize Effects on the Mechanical Behavior of Nanoporous Au
Biener, J., Hodge, A. M., Hayes, J. R., Volkert, C. A., Zepeda-Ruiz, L. A., Hamza, A. V., & Abraham, F. F. (2006) · Nano Letters · doi:10.1021/nl061978i · Cited by 472
Self-citationGeneralized Fabrication of Nanoporous Metals (Au, Pd, Pt, Ag, and Cu) through Chemical Dealloying
Zhang, Z., Wang, Y., Qi, Z., Zhang, W., Qin, J., & Frenzel, J. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp811445a · Cited by 455
Moisture Effect on CO Oxidation over Au/TiO2 Catalyst
Daté, M., & Haruta, M. (2001) · Journal of Catalysis · doi:10.1006/jcat.2001.3254 · Cited by 453
Trends in the Catalytic CO Oxidation Activity of Nanoparticles
Falsig, H., Hvolbæk, B., Kristensen, I. S., Jiang, T., Bligaard, T., Christensen, C. H., & Nørskov, J. K. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200801479 · Cited by 433
Nanoporous Metals for Catalytic and Optical Applications
Ding, Y., & Chen, M. (2009) · MRS Bulletin · doi:10.1557/mrs2009.156 · Cited by 415
Metallic Mesoporous Nanocomposites for Electrocatalysis
Ding, Y., Chen, M., & Erlebacher, J. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0320119 · Cited by 414
Surface-Stress Induced Macroscopic Bending of Nanoporous Gold Cantilevers
Kramer, D., Viswanath, R. N., & Weissmüller, J. (2004) · Nano Letters · doi:10.1021/nl049927d · Cited by 409
Poliakoff, M., & Licence, P. (2007) · Nature · doi:10.1038/450810a · Cited by 400
Surface stress of clean and adsorbate-covered solids
Haiss, W. (2001) · Reports on Progress in Physics · doi:10.1088/0034-4885/64/5/201 · Cited by 392
Synergistic Effect in an Au−Ag Alloy Nanocatalyst: CO Oxidation
Liu, J.-H., Wang, A.-Q., Chi, Y.-S., Lin, H.-P., & Mou, C.-Y. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp044938g · Cited by 377
Gold Catalysts: Towards Sustainable Chemistry
Ishida, T., & Haruta, M. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701622 · Cited by 376
Estimating surface diffusion coefficients
Seebauer, E. G. (1995) · Progress in Surface Science · doi:10.1016/0079-6816(95)00039-2 · Cited by 369
Corrosion micromorphology of noble metal alloys and depletion gilding
Forty, A. J. (1979) · Nature · doi:10.1038/282597a0 · Cited by 365
Nanostructured Porous Gold for Methanol Electro-Oxidation
Zhang, J., Liu, P., Ma, H., & Ding, Y. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp072333p · Cited by 352
Application of copper–gold alloys in catalysis: current status and future perspectives
Bracey, C. L., Ellis, P. R., & Hutchings, G. J. (2009) · Chemical Society Reviews · doi:10.1039/b817729p · Cited by 350
Adsorption of oxygen on Au(111) by exposure to ozone
Saliba, N. A., Parker, D., & Koel, B. E. (1998) · Surface Science · doi:10.1016/s0039-6028(98)00309-4 · Cited by 340
Trends in CO Oxidation Rates for Metal Nanoparticles and Close-Packed, Stepped, and Kinked Surfaces
Jiang, T., Mowbray, D. J., Dobrin, S., Falsig, H., Hvolbæk, B., Bligaard, T., & Nørskov, J. K. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp811185g · Cited by 276
Nanoporous Plasmonic Metamaterials
Biener, J., Nyce, G. W., Hodge, A. M., Biener, M. M., Hamza, A. V., & Maier, S. A. (2008) · Advanced Materials · doi:10.1002/adma.200701899 · Cited by 261
Self-citationThree-dimensional morphology of nanoporous gold
Fujita, T., Qian, L.-H., Inoke, K., Erlebacher, J., & Chen, M.-W. (2008) · Applied Physics Letters · doi:10.1063/1.2948902 · Cited by 261
Liu, L. M., McAllister, B., Ye, H. Q., & Hu, P. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056801p · Cited by 257
Bion, N., Epron, F., Moreno, M., Mariño, F., & Duprez, D. (2008) · Topics in Catalysis · doi:10.1007/s11244-008-9116-x · Cited by 251
Nanoporous Au: An Unsupported Pure Gold Catalyst?
Wittstock, A., Neumann, B., Schaefer, A., Dumbuya, K., Kübel, C., Biener, M. M., Zielasek, V., Steinrück, H.-P., Gottfried, J. M., Biener, J., et al. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp808185v · Cited by 244
Self-citationCatalytic reduction of oxygen and hydrogen peroxide by nanoporous gold
ZEIS, R., LEI, T., SIERADZKI, K., SNYDER, J., & ERLEBACHER, J. (2008) · Journal of Catalysis · doi:10.1016/j.jcat.2007.10.017 · Cited by 242
Surface Science Investigations of Oxidative Chemistry on Gold
Gong, J., & Mullins, C. B. (2009) · Accounts of Chemical Research · doi:10.1021/ar8002706 · Cited by 230
Platinum-plated nanoporous gold: An efficient, low Pt loading electrocatalyst for PEM fuel cells
Zeis, R., Mathur, A., Fritz, G., Lee, J., & Erlebacher, J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.12.007 · Cited by 215
Dealloying to nanoporous Au/Pt alloys and their structure sensitive electrocatalytic properties
Xu, C., Wang, R., Chen, M., Zhang, Y., & Ding, Y. (2010) · Phys. Chem. Chem. Phys. · doi:10.1039/b917788d · Cited by 212
Hard Materials with Tunable Porosity
Erlebacher, J., & Seshadri, R. (2009) · MRS Bulletin · doi:10.1557/mrs2009.155 · Cited by 207
Electron Metallography of Chemical Attack Upon Some Alloys Susceptible to Stress Corrosion Cracking
Pickering, H. W., & Swann, P. R. (1963) · Corrosion · doi:10.5006/0010-9312-19.11.373 · Cited by 185
A micromorphological study of the dissolution of silver-gold alloys in nitric acid
Forty, A. J., & Durkin, P. (1980) · Philosophical Magazine A · doi:10.1080/01418618008239360 · Cited by 169
Dealloying of Ag-Au Alloys in Halide-Containing Electrolytes
Dursun, A., Pugh, D. V., & Corcoran, S. G. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1580824 · Cited by 169
Aerobic Oxidation of d-Glucose on Support-Free Nanoporous Gold
Yin, H., Zhou, C., Xu, C., Liu, P., Xu, X., & Ding, Y. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp8019864 · Cited by 161
Characterization and Mechanical Behavior of Nanoporous Gold
Hodge, A. M., Hayes, J. R., Caro, J. A., Biener, J., & Hamza, A. V. (2006) · Advanced Engineering Materials · doi:10.1002/adem.200600079 · Cited by 160
Self-citationSurface Chemistry in Nanoscale Materials
Biener, J., Wittstock, A., Baumann, T. F., Weißmüller, J., Bäumer, M., & Hamza, A. V. (2009) · Materials · doi:10.3390/ma2042404 · Cited by 159
Self-citationEfficient CO Oxidation at Low Temperature on Au(111)
Min, B. K., Alemozafar, A. R., Pinnaduwage, D. S., et al. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0616213 · Cited by 145
Adsorption of carbon monoxide on Au(110)-(1×2)
Gottfried, J. M., Schmidt, K., Schroeder, S. L. M., & Christmann, K. (2003) · Surface Science · doi:10.1016/s0039-6028(03)00595-8 · Cited by 139
Novel Nanoporous Au−Pd Alloy with High Catalytic Activity and Excellent Electrochemical Stability
Lang, X., Guo, H., Chen, L. Y., Kudo, A., Yu, J. S., Zhang, W., Inoue, A., & Chen, M. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp907682x · Cited by 124
Length scales in alloy dissolution and measurement of absolute interfacial free energy
Rugolo, J., Erlebacher, J., & Sieradzki, K. (2006) · Nature Materials · doi:10.1038/nmat1780 · Cited by 124
Automotive catalysis studied by surface science
Bowker, M. (2008) · Chemical Society Reviews · doi:10.1039/b719206c · Cited by 110
Oxidation of glycerol and propanediols in methanol over heterogeneous gold catalysts
Taarning, E., Madsen, A. T., Marchetti, J. M., et al. (2008) · Green Chemistry · doi:10.1039/b714292g · Cited by 104
Enhanced Photoelectrocatalytic Activity of Methanol Oxidation on TiO2-Decorated Nanoporous Gold
Jia, C., Yin, H., Ma, H., Wang, R., Ge, X., Aiqiu, Z., Xu, X., & Ding, Y. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp904191k · Cited by 88
Probing the Dealloying Critical Potential
Dursun, A., Pugh, D. V., & Corcoran, S. G. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1848351 · Cited by 77
Interaction of Oxygen with Supported Ag–Au Alloy Catalysts
Kondarides, D. Ι., & Verykios, X. E. (1996) · Journal of Catalysis · doi:10.1006/jcat.1996.0038 · Cited by 66
Huang, J. (2009) · Chemical Communications · doi:10.1039/b819658c · Cited by 53
A kinetic study on the low temperature oxidation of CO over Ag-contaminated Au fine powder
Iizuka, Y., Miyamae, T., Miura, T., Okumura, M., Daté, M., & Haruta, M. (2009) · Journal of Catalysis · doi:10.1016/j.jcat.2009.01.004 · Cited by 34
Active role of buried ultrathin oxide layers in adsorption of O2 on Au films
Quek, S. Y., Friend, C. M., & Kaxiras, E. (2006) · Surface Science · doi:10.1016/j.susc.2006.05.060 · Cited by 14
Cited by
Zhang, J., & Li, C. M. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35210a · Cited by 527
Metadata
- Authors
- Wittstock, A., Biener, J., & Bäumer, M.
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 12
- Issue
- 40
- Pages
- 12919
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2029622302
- Cited by
- 337
- References
- 68
- FWCI
- 9.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.