The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
CO2capture and conversion using Mg-MOF-74 prepared by a sonochemical method
Abstract
Mg-MOF-74 crystals were successfully prepared in 1 h by a sonochemical method (Mg-MOF-74(S)) after triethylamine (TEA) was added as a deprotonating agent. Mg-MOF-74(S) (1640 m2 g−1 BET surface area) displayed similar textural properties to those of a high-quality MOF sample synthesized in 24 h by the solvothermal method (Mg-MOF-74(C), 1525 m2 g−1). However, mesopores were formed, probably due to the competitive binding of TEA to Mg2+ ions, and the average particle size of the former (ca. 0.6 μm) was significantly smaller than that of the latter (ca. 14 μm). The H2O adsorption capacity was 593 mL g−1 at 298 K for Mg-MOF-74(S), displaying higher hydrophilicity than Zeolite 13X. The adsorption isotherms of Mg-MOF-74(S) for CO2 showed high adsorption capacity (350 mg g−1 at 298 K) and high isosteric heats of adsorption for CO2 (42 to 22 kJ mol−1). The breakthrough experiment confirmed excellent selectivity to CO2 over N2 at ambient conditions (saturation capacity of ca. 179 mg g−1). Ten consecutive adsorption–desorption cycles at 298 K established no deterioration of the adsorption capacity, which showed reversible adsorbent regeneration at 323 K under helium flow for a total duration of 1400 min. Mg-MOF-74(S) also demonstrated excellent catalytic performance in cycloaddition of CO2 to styrene oxide under relatively mild reaction conditions (2.0 MPa, 373 K) with close to 100% selectivity to carbonate, which was confirmed by GC-MS, 1H-NMR, and FT-IR. Mg-MOF-74(S) could be reused 3 times without losing catalytic activity and with no structural deterioration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Self-citationA Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
High-Throughput Synthesis of Zeolitic Imidazolate Frameworks and Application to CO 2 Capture
Banerjee, R., Phan, A., Wang, B., Knobler, C., Furukawa, H., O'Keeffe, M., & Yaghi, O. M. (2008) · Science · doi:10.1126/science.1152516 · Cited by 4,205
Unit operations of chemical engineering
(1957) · Journal of the Franklin Institute · doi:10.1016/0016-0032(57)90777-9 · Cited by 2,983
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Metal–organic frameworks—prospective industrial applications
Mueller, U., Schubert, M., Teich, F., Puetter, H., Schierle-Arndt, K., & Pastré, J. (2006) · J. Mater. Chem. · doi:10.1039/b511962f · Cited by 2,325
Metal–Organic Frameworks: Opportunities for Catalysis
Farrusseng, D., Aguado, S., & Pinel, C. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200806063 · Cited by 1,888
Rao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Shaikh, A.-A. G., & Sivaram, S. (1996) · Chemical Reviews · doi:10.1021/cr950067i · Cited by 1,381
Cited by
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
MOF-Based Membranes for Gas Separations
Qian, Q., Asinger, P. A., Lee, M. J., Han, G., Mizrahi Rodriguez, K., Lin, S., Benedetti, F. M., Wu, A. X., Chi, W. S., & Smith, Z. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00119 · Cited by 1,553
Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs): A review
Khan, N. A., Hasan, Z., & Jhung, S. H. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.11.011 · Cited by 1,398
Nanoarchitectured Design of Porous Materials and Nanocomposites from Metal‐Organic Frameworks
Kaneti, Y. V., Tang, J., Salunkhe, R. R., Jiang, X., Yu, A., Wu, K. C. ‐., & Yamauchi, Y. (2017) · Advanced Materials · doi:10.1002/adma.201604898 · Cited by 888
Emerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
Capture and conversion of CO2 at ambient conditions by a conjugated microporous polymer
Xie, Y., Wang, T.-T., Liu, X.-H., Zou, K., & Deng, W.-Q. (2013) · Nature Communications · doi:10.1038/ncomms2960 · Cited by 772
Synthesis of metal-organic frameworks: A mini review
Lee, Y.-R., Kim, J., & Ahn, W.-S. (2013) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-013-0140-6 · Cited by 705
Self-citationKhan, N. A., & Jhung, S. H. (2015) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2014.10.008 · Cited by 594
Pore Space Partition in Metal–Organic Frameworks
Zhai, Q.-G., Bu, X., Zhao, X., Li, D.-S., & Feng, P. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00526 · Cited by 571
Metal-organic frameworks for advanced drug delivery
He, S., Wu, L., Li, X., Sun, H., Xiong, T., Liu, J., Huang, C., Xu, H., Sun, H., Chen, W., et al. (2021) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2021.03.019 · Cited by 528
Adsorption/catalytic properties of MIL-125 and NH2-MIL-125
Kim, S.-N., Kim, J., Kim, H.-Y., Cho, H.-Y., & Ahn, W.-S. (2013) · Catalysis Today · doi:10.1016/j.cattod.2012.08.014 · Cited by 528
Self-citationMetal‐Organic Frameworks for CO2 Chemical Transformations
He, H., Perman, J. A., Zhu, G., & Ma, S. (2016) · Small · doi:10.1002/smll.201602711 · Cited by 505
Metal–organic frameworks for the chemical fixation of CO2 into cyclic carbonates
Pal, T. K., De, D., & Bharadwaj, P. K. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213173 · Cited by 458
Liang, J., Huang, Y.-B., & Cao, R. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.11.013 · Cited by 444
Metal organic framework based catalysts for CO2 conversion
Maina, J. W., Pozo-Gonzalo, C., Kong, L., Schütz, J., Hill, M., & Dumée, L. F. (2017) · Materials Horizons · doi:10.1039/c6mh00484a · Cited by 423
Younas, M., Rezakazemi, M., Daud, M., Wazir, M. B., Ahmad, S., Ullah, N., Inamuddin, & Ramakrishna, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100849 · Cited by 421
Large‐Scale Production of Metal–Organic Frameworks
Chakraborty, D., Yurdusen, A., Mouchaham, G., Nouar, F., & Serre, C. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202309089 · Cited by 421
CO2 cycloaddition of styrene oxide over MOF catalysts
Kim, J., Kim, S.-N., Jang, H.-G., Seo, G., & Ahn, W.-S. (2013) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.12.018 · Cited by 418
Self-citationMetal Organic Frameworks (MOFs) and ultrasound: A review
Vaitsis, C., Sourkouni, G., & Argirusis, C. (2019) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2018.11.004 · Cited by 410
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Zhai, Q.-G., Bu, X., Mao, C., Zhao, X., & Feng, P. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13491 · Cited by 349
Bhattacharjee, S., Chen, C., & Ahn, W.-S. (2014) · RSC Adv. · doi:10.1039/c4ra11259h · Cited by 301
Self-citationCarbon dioxide adsorption based on porous materials
Sai Bhargava Reddy, M., Ponnamma, D., Sadasivuni, K. K., Kumar, B., & Abdullah, A. M. (2021) · RSC Advances · doi:10.1039/d0ra10902a · Cited by 300
Metal–Organic Frameworks in Solid–Gas Phase Catalysis
Wang, C., An, B., & Lin, W. (2019) · ACS Catalysis · doi:10.1021/acscatal.8b04055 · Cited by 297
Luo, Y.-H., Dong, L.-Z., Liu, J., Li, S.-L., & Lan, Y.-Q. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.03.019 · Cited by 297
Zhi, Y., Shao, P., Feng, X., Xia, H., Zhang, Y., Shi, Z., Mu, Y., & Liu, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08629f · Cited by 294
Ionic Liquid/Metal–Organic Framework Composites: From Synthesis to Applications
Kinik, F. P., Uzun, A., & Keskin, S. (2017) · ChemSusChem · doi:10.1002/cssc.201700716 · Cited by 288
Mechanochemical synthesis of metal–organic frameworks
Chen, D., Zhao, J., Zhang, P., & Dai, S. (2019) · Polyhedron · doi:10.1016/j.poly.2019.01.024 · Cited by 285
An ultra-tunable platform for molecular engineering of high-performance crystalline porous materials
Zhai, Q.-G., Bu, X., Mao, C., Zhao, X., Daemen, L., Cheng, Y., Ramirez-Cuesta, A. J., & Feng, P. (2016) · Nature Communications · doi:10.1038/ncomms13645 · Cited by 279
Liao, P.-Q., Chen, H., Zhou, D.-D., Liu, S.-Y., He, C.-T., Rui, Z., Ji, H., Zhang, J.-P., & Chen, X.-M. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02717e · Cited by 270
Wang, X., Zhou, Y., Guo, Z., Chen, G., Li, J., Shi, Y., Liu, Y., & Wang, J. (2015) · Chemical Science · doi:10.1039/c5sc02050f · Cited by 263
Performance of metal–organic frameworks in the electrochemical sensing of environmental pollutants
Tajik, S., Beitollahi, H., Garkani Nejad, F., Sheikhshoaie, I., Nugraha, A. S., Jang, H. W., Yamauchi, Y., & Shokouhimehr, M. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta08344e · Cited by 261
Beyzavi, M. H., Stephenson, C. J., Liu, Y., Karagiaridi, O., Hupp, J. T., & Farha, O. K. (2015) · Frontiers in Energy Research · doi:10.3389/fenrg.2014.00063 · Cited by 259
Abdi, J., Sisi, A. J., Hadipoor, M., & Khataee, A. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127558 · Cited by 144
Ben-Mansour, R., & Qasem, N. A. A. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.010 · Cited by 139
Development trends in porous adsorbents for carbon capture
Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03149 · Cited by 127
Superior CO 2 adsorption from waste coffee ground derived carbons
Travis, W., Gadipelli, S., & Guo, Z. (2015) · RSC Advances · doi:10.1039/c4ra13026j · Cited by 86
Performance-Based Screening of Porous Materials for Carbon Capture
Farmahini, A. H., Krishnamurthy, S., Friedrich, D., Brandani, S., & Sarkisov, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01266 · Cited by 7
Metadata
- Authors
- Yang, D.-A., Cho, H.-Y., Kim, J., Yang, S.-T., & Ahn, W.-S.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 4
- Pages
- 6465-6473
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1964344603
- Cited by
- 585
- References
- 69
- FWCI
- 38.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.