The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Solar cells with one-day energy payback for the factories of the future
Open accessAbstract
Scalability is a requirement before any new energy source can be expected to house a possible solution to the challenge that mankind’s increasing energy demand presents. No renewable energy source is as abundant as the Sun and yet efficient and low-cost conversion of solar energy still has not been developed. We approach the challenge by firstly taking a technology that efficiently addresses the need for daily production of 1 GWp on a global level, which does not employ elements with critically low abundance and has a low thermal budget. We then applied life cycle assessment methodologies to direct research and developed such technology in the form of a polymer solar cell that presents a significant improvement in energy payback time (EPBT) and found that very short energy payback times on the order of one day are possible, thus potentially presenting a solution to the current energy gap of >14 TW by year 2050.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The authors proposed a polymer solar cell technology capable of generating very low-cost solar energy, capable of being paid for during a day of use.”
From Methods for Financial Assessment of Renewable Energy Projects: A Review (2022) · cites this paper as Espinosa et al. [57]
In the citing paper
“In the most cited articles in the TPEM category (Table 4), Espinosa et al. [57] combined the energy PBP with LCOE to evaluate simplified photovoltaic cells.”
From Methods for Financial Assessment of Renewable Energy Projects: A Review (2022) · cites this paper as Espinosa et al. [57]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Klüppel, H.-J. (2005) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2005.03.001 · Cited by 4,639
Environmental management. Life cycle assessment. Requirements and guidelines
(2015) · doi:10.3403/30152732u · Cited by 1,730
The Eco-indicator 99, A damage oriented method for Life Cycle Impact Assessment
Goedkoop (1999) · Medical Entomology and Zoology · Cited by 1,248
Krebs, F. C., Gevorgyan, S. A., & Alstrup, J. (2009) · Journal of Materials Chemistry · doi:10.1039/b823001c · Cited by 1,229
Self-citationUpscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Self-citationTung, V. C., Chen, L.-M., Allen, M. J., Wassei, J. K., Nelson, K., Kaner, R. B., & Yang, Y. (2009) · Nano Letters · doi:10.1021/nl9001525 · Cited by 1,010
Organic solar cells with carbon nanotube network electrodes
Rowell, M. W., Topinka, M. A., McGehee, M. D., Prall, H.-J., Dennler, G., Sariciftci, N. S., Hu, L., & Gruner, G. (2006) · Applied Physics Letters · doi:10.1063/1.2209887 · Cited by 1,010
Organic Light-Emitting Diodes on Solution-Processed Graphene Transparent Electrodes
Wu, J., Agrawal, M., Becerril, H. A., Bao, Z., Liu, Z., Chen, Y., & Peumans, P. (2010) · ACS Nano · doi:10.1021/nn900728d · Cited by 975
Cited by
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
Zhang, G., Zhao, J., Chow, P. C. Y., Jiang, K., Zhang, J., Zhu, Z., Zhang, J., Huang, F., & Yan, H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00535 · Cited by 1,661
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Self-citationBaran, D., Ashraf, R. S., Hanifi, D. A., Abdelsamie, M., Gasparini, N., Röhr, J. A., Holliday, S., Wadsworth, A., Lockett, S., Neophytou, M., et al. (2017) · Nature Materials · doi:10.1038/nmat4797 · Cited by 1,027
Stability of perovskite solar cells
Wang, D., Wright, M., Elumalai, N. K., & Uddin, A. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.025 · Cited by 998
25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks
Krebs, F. C., Espinosa, N., Hösel, M., Søndergaard, R. R., & Jørgensen, M. (2014) · Advanced Materials · doi:10.1002/adma.201302031 · Cited by 793
Self-citationFlexible and Semitransparent Organic Solar Cells
Li, Y., Xu, G., Cui, C., & Li, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701791 · Cited by 788
The future of organic photovoltaics
Mazzio, K. A., & Luscombe, C. K. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00227j · Cited by 766
Emergence of highly transparent photovoltaics for distributed applications
Traverse, C. J., Pandey, R., Barr, M. C., & Lunt, R. R. (2017) · Nature Energy · doi:10.1038/s41560-017-0016-9 · Cited by 731
Organic—inorganic hybrid solar cells: A comparative review
Wright, M., & Uddin, A. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.006 · Cited by 654
Versatile ternary organic solar cells: a critical review
An, Q., Zhang, F., Zhang, J., Tang, W., Deng, Z., & Hu, B. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02641e · Cited by 645
Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts
Gong, J., Darling, S. B., & You, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00615e · Cited by 619
Bessette, A., & Hanan, G. S. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60411j · Cited by 568
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
The case for organic photovoltaics
Darling, S. B., & You, F. (2013) · RSC Advances · doi:10.1039/c3ra42989j · Cited by 508
Nugent, D., & Sovacool, B. K. (2014) · Energy Policy · doi:10.1016/j.enpol.2013.10.048 · Cited by 461
An autonomous wearable biosensor powered by a perovskite solar cell
Min, J., Demchyshyn, S., Sempionatto, J. R., Song, Y., Hailegnaw, B., Xu, C., Yang, Y., Solomon, S., Putz, C., Lehner, L. E., et al. (2023) · Nature Electronics · doi:10.1038/s41928-023-00996-y · Cited by 372
Wang, E., Mammo, W., & Andersson, M. R. (2014) · Advanced Materials · doi:10.1002/adma.201304945 · Cited by 364
Savagatrup, S., Chan, E., Renteria‐Garcia, S. M., Printz, A. D., Zaretski, A. V., O'Connor, T. F., Rodriquez, D., Valle, E., & Lipomi, D. J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201401758 · Cited by 360
Recent progress in organic photovoltaics: device architecture and optical design
Cao, W., & Xue, J. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00260a · Cited by 356
Xue, Q., Xia, R., Brabec, C. J., & Yip, H.-L. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00154e · Cited by 344
Po, R., Bernardi, A., Calabrese, A., Carbonera, C., Corso, G., & Pellegrino, A. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43460e · Cited by 336
Transparent electrodes for organic optoelectronic devices: a review
Cao, W., Li, J., Chen, H., & Xue, J. (2014) · Journal of Photonics for Energy · doi:10.1117/1.jpe.4.040990 · Cited by 335
Alemu Mengistie, D., Wang, P.-C., & Chu, C.-W. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11726j · Cited by 316
Cao, B., Adutwum, L. A., Oliynyk, A. O., Luber, E. J., Olsen, B. C., Mar, A., & Buriak, J. M. (2018) · ACS Nano · doi:10.1021/acsnano.8b04726 · Cited by 316
Green chemistry for organic solar cells
Burke, D. J., & Lipomi, D. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41096j · Cited by 283
Achieving a high fill factor for organic solar cells
Jao, M.-H., Liao, H.-C., & Su, W.-F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00126b · Cited by 279
High efficiency, fully inkjet printed organic solar cells with freedom of design
Eggenhuisen, T. M., Galagan, Y., Biezemans, A. F. K. V., Slaats, T. M. W. L., Voorthuijzen, W. P., Kommeren, S., Shanmugam, S., Teunissen, J. P., Hadipour, A., Verhees, W. J. H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00540j · Cited by 275
Guo, X., Zhou, N., Lou, S. J., Hennek, J. W., Ponce Ortiz, R., Butler, M. R., Boudreault, P.-L. T., Strzalka, J., Morin, P.-O., Leclerc, M., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3081583 · Cited by 265
Life cycle assessment of recycling strategies for perovskite photovoltaic modules
Tian, X., Stranks, S. D., & You, F. (2021) · Nature Sustainability · doi:10.1038/s41893-021-00737-z · Cited by 262
Savagatrup, S., Printz, A. D., O'Connor, T. F., Zaretski, A. V., Rodriquez, D., Sawyer, E. J., Rajan, K. M., Acosta, R. I., Root, S. E., & Lipomi, D. J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02657h · Cited by 255
Flow-enhanced solution printing of all-polymer solar cells
Diao, Y., Zhou, Y., Kurosawa, T., Shaw, L., Wang, C., Park, S., Guo, Y., Reinspach, J. A., Gu, K., Gu, X., et al. (2015) · Nature Communications · doi:10.1038/ncomms8955 · Cited by 254
Wearable organic solar cells with high cyclic bending stability: Materials selection criteria
O’Connor, T. F., Zaretski, A. V., Savagatrup, S., Printz, A. D., Wilkes, C. D., Diaz, M. I., Sawyer, E. J., & Lipomi, D. J. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.09.049 · Cited by 131
Methods for Financial Assessment of Renewable Energy Projects: A Review
Delapedra-Silva, V., Ferreira, P., Cunha, J., & Kimura, H. (2022) · Processes · doi:10.3390/pr10020184 · Cited by 114
Bucher, L., Tanguy, L., Desbois, N., Karsenti, P., Harvey, P. D., Gros, C. P., & Sharma, G. D. (2018) · Solar RRL · doi:10.1002/solr.201700168 · Cited by 13
Metadata
- Authors
- Espinosa, N., Hösel, M., Angmo, D., & Krebs, F. C.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 1
- Pages
- 5117-5132
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2001474611
- Cited by
- 496
- References
- 38
- FWCI
- 43.38
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.