The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Turning renewable resources into value-added polymer: development of lignin-based thermoplastic
Abstract
Productive uses of lignin, the third most abundant natural polymer, have been sought for decades. One especially attractive possibility is that of developing value-added products including thermoplastics based on lignin. This possibility warrants special attention due to growth of the modern biofuel industries. However, the polydisperse molecular weight and hyper-branched structure of lignin has hindered the creation of high-performance biopolymers. Here, we report the preparation and characterization of novel lignin-based, partially carbon-neutral thermoplastics. We first altered the molecular weight of lignin, either by fractionation with methanol, or by formaldehyde crosslinking. Crosslinking of lignin increases the molecular weight, exhibiting Mn = 31 000 g mol−1, whereas that of as-received lignin is 1840 g mol−1. Tuning the molecular weight of lignin enabled successful preparation of novel lignin-derived thermoplastics, when coupled with telechelic polybutadiene soft-segments at proper feed ratios. Characteristic to thermoplastic rubbers, free-standing films of the resulting copolymers exhibit two-phase morphology and associated relaxations in the dynamic mechanical loss spectrum. To the best of our knowledge this article is the first report to demonstrate phase immiscibility, melt-processibility, and biphasic morphology of soft and hard segments in a lignin-based copolymer for all feed ratios of two macromolecular components. The use of higher molecular weight lignin enhanced the resulting shear modulus due to efficient network formation of telechelic polybutadiene bridges. The storage modulus in the rubbery plateau region increased with increasing lignin content. The successful synthesis of novel lignin-based thermoplastics will open a new pathway to biomass utilization and will help conserve petrochemicals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Path Forward for Biofuels and Biomaterials
Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., Frederick, W. J., Hallett, J. P., Leak, D. J., Liotta, C. L., et al. (2006) · Science · doi:10.1126/science.1114736 · Cited by 5,741
Recent Industrial Applications of Lignin: A Sustainable Alternative to Nonrenewable Materials
Lora, J. H., & Glasser, W. G. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021070006895 · Cited by 1,176
The Chemical Composition of Wood
PETTERSEN, R. C. (1984) · Advances in Chemistry · doi:10.1021/ba-1984-0207.ch002 · Cited by 874
Gosselink, R. J. A., de Jong, E., Guran, B., & Abächerli, A. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.015 · Cited by 533
A Comprehensive Approach for Quantitative Lignin Characterization by NMR Spectroscopy
Capanema, E. A., Balakshin, M. Y., & Kadla, J. F. (2004) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf035282b · Cited by 504
Pan, X., Gilkes, N., Kadla, J., Pye, K., Saka, S., Gregg, D., Ehara, K., Xie, D., Lam, D., & Saddler, J. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.20905 · Cited by 455
Lignin Esters for Use in Unsaturated Thermosets: Lignin Modification and Solubility Modeling
Thielemans, W., & Wool, R. P. (2005) · Biomacromolecules · doi:10.1021/bm0500345 · Cited by 305
Capanema, E. A., Balakshin, M. Y., & Kadla, J. F. (2005) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf0515330 · Cited by 277
Lignins: Major Sources, Structure and Properties
Gellerstedt, G., & Henriksson, G. (2008) · Monomers, Polymers and Composites from Renewable Resources · doi:10.1016/b978-0-08-045316-3.00009-0 · Cited by 265
Novel applications of lignin in composite materials
Thielemans, W., Can, E., Morye, S. S., & Wool, R. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.2247 · Cited by 252
Cited by
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
A concise review of current lignin production, applications, products and their environmental impact
Bajwa, D. S., Pourhashem, G., Ullah, A. H., & Bajwa, S. G. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111526 · Cited by 1,270
Towards lignin-based functional materials in a sustainable world
Kai, D., Tan, M. J., Chee, P. L., Chua, Y. K., Yap, Y. L., & Loh, X. J. (2016) · Green Chemistry · doi:10.1039/c5gc02616d · Cited by 1,267
Figueiredo, P., Lintinen, K., Hirvonen, J. T., Kostiainen, M. A., & Santos, H. A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.001 · Cited by 956
A review on lignin-based polymeric, micro- and nano-structured materials
Duval, A., & Lawoko, M. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.017 · Cited by 733
Ashokkumar, V., Venkatkarthick, R., Jayashree, S., Chuetor, S., Dharmaraj, S., Kumar, G., Chen, W.-H., & Ngamcharussrivichai, C. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2021.126195 · Cited by 681
From monomers to polymers from renewable resources: Recent advances
Gandini, A., & Lacerda, T. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.11.002 · Cited by 620
Thermal properties of lignin in copolymers, blends, and composites: a review
Sen, S., Patil, S., & Argyropoulos, D. S. (2015) · Green Chemistry · doi:10.1039/c5gc01066g · Cited by 520
Characterization and analysis of the molecular weight of lignin for biorefining studies
Tolbert, A., Akinosho, H., Khunsupat, R., Naskar, A. K., & Ragauskas, A. J. (2014) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1500 · Cited by 504
Self-citationLignin: a nature-inspired sun blocker for broad-spectrum sunscreens
Qian, Y., Qiu, X., & Zhu, S. (2015) · Green Chemistry · doi:10.1039/c4gc01333f · Cited by 492
Recent advances in bio‐based epoxy resins and bio‐based epoxy curing agents
Baroncini, E. A., Kumar Yadav, S., Palmese, G. R., & Stanzione, J. F. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44103 · Cited by 451
Qian, Y., Deng, Y., Qiu, X., Li, H., & Yang, D. (2014) · Green Chemistry · doi:10.1039/c3gc42131g · Cited by 440
Cascade utilization of lignocellulosic biomass to high-value products
Liu, Y., Nie, Y., Lu, X., Zhang, X., He, H., Pan, F., Zhou, L., Liu, X., Ji, X., & Zhang, S. (2019) · Green Chemistry · doi:10.1039/c9gc00473d · Cited by 405
Yang, W., Fortunati, E., Gao, D., Balestra, G. M., Giovanale, G., He, X., Torre, L., Kenny, J. M., & Puglia, D. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03782 · Cited by 368
Ko, J. K., Kim, Y., Ximenes, E., & Ladisch, M. R. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25349 · Cited by 357
Preparation of a lignin-based vitrimer material and its potential use for recoverable adhesives
Zhang, S., Liu, T., Hao, C., Wang, L., Han, J., Liu, H., & Zhang, J. (2018) · Green Chemistry · doi:10.1039/c8gc01299g · Cited by 342
Lignin‐Derived Advanced Carbon Materials
Chatterjee, S., & Saito, T. (2015) · ChemSusChem · doi:10.1002/cssc.201500692 · Cited by 333
Self-citationLignin‐Based Thermoplastic Materials
Wang, C., Kelley, S. S., & Venditti, R. A. (2016) · ChemSusChem · doi:10.1002/cssc.201501531 · Cited by 309
Synthesis and Characterization of Bio-based Epoxy Resins Derived from Vanillyl Alcohol
Hernandez, E. D., Bassett, A. W., Sadler, J. M., La Scala, J. J., & Stanzione, J. F. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00835 · Cited by 307
Review on lignin modifications toward natural UV protection ingredient for lignin-based sunscreens
Tran, M. H., Phan, D.-P., & Lee, E. Y. (2021) · Green Chemistry · doi:10.1039/d1gc01139a · Cited by 292
Qian, Y., Zhong, X., Li, Y., & Qiu, X. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.03.001 · Cited by 291
Galkin, M. V., & Samec, J. S. M. (2014) · ChemSusChem · doi:10.1002/cssc.201402017 · Cited by 282
Lignin-based carbon fibers: Formation, modification and potential applications
Wang, S., Bai, J., Innocent, M. T., Wang, Q., Xiang, H., Tang, J., & Zhu, M. (2022) · Green Energy & Environment · doi:10.1016/j.gee.2021.04.006 · Cited by 280
Fractionation and characterization of industrial lignins
Li, H., & McDonald, A. G. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.08.013 · Cited by 266
Mechanical milling as a technology to produce structural and functional bio-nanocomposites
Gorrasi, G., & Sorrentino, A. (2015) · Green Chemistry · doi:10.1039/c5gc00029g · Cited by 260
Metadata
- Authors
- Saito, T., Brown, R. H., Hunt, M. A., Pickel, D. L., Pickel, J. M., Messman, J. M., Baker, F. S., Keller, M., & Naskar, A. K.
- Venue
- Green Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 14
- Issue
- 12
- Pages
- 3295
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W2036431603
- Cited by
- 395
- References
- 33
- FWCI
- 11.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.