The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Liquid alloy printing of microfluidic stretchable electronics
Abstract
Recently, microfluidic stretchable electronics has attracted great interest from academia since conductive liquids allow for larger cross-sections when stretched and hence low resistance at longer lengths. However, as a serial process it has suffered from low throughput, and a parallel processing technology is needed for more complex systems and production at low costs. In this work, we demonstrate such a technology to implement microfluidic electronics by stencil printing of a liquid alloy onto a semi-cured polydimethylsiloxane (PDMS) substrate, assembly of rigid active components, encapsulation by pouring uncured PDMS on-top and subsequent curing. The printing showed resolution of 200 μm and linear resistance increase of the liquid conductors when elongated up to 60%. No significant change of resistance was shown for a circuit with one LED after 1000 times of cycling between a 0% and an elongation of 60% every 2 s. A radio frequency identity (RFID) tag was demonstrated using the developed technology, showing that good performance could be maintained well into the radio frequency (RF) range.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Cited by
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Stretchable and Soft Electronics using Liquid Metals
Dickey, M. D. (2017) · Advanced Materials · doi:10.1002/adma.201606425 · Cited by 1,776
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
PDMS with designer functionalities—Properties, modifications strategies, and applications
Wolf, M. P., Salieb-Beugelaar, G. B., & Hunziker, P. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.001 · Cited by 853
Emerging Applications of Liquid Metals Featuring Surface Oxides
Dickey, M. D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5043017 · Cited by 719
A wearable cardiac ultrasound imager
Hu, H., Huang, H., Li, M., Gao, X., Yin, L., Qi, R., Wu, R. S., Chen, X., Ma, Y., Shi, K., et al. (2023) · Nature · doi:10.1038/s41586-022-05498-z · Cited by 644
Tang, W., Jiang, T., Fan, F. R., Yu, A. F., Zhang, C., Cao, X., & Wang, Z. L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501331 · Cited by 540
Attributes, Fabrication, and Applications of Gallium‐Based Liquid Metal Particles
Lin, Y., Genzer, J., & Dickey, M. D. (2020) · Advanced Science · doi:10.1002/advs.202000192 · Cited by 503
Recent Progress on Stretchable Electronic Devices with Intrinsically Stretchable Components
Trung, T. Q., & Lee, N. (2017) · Advanced Materials · doi:10.1002/adma.201603167 · Cited by 497
Liquid metal enabled microfluidics
Khoshmanesh, K., Tang, S.-Y., Zhu, J. Y., Schaefer, S., Mitchell, A., Kalantar-zadeh, K., & Dickey, M. D. (2017) · Lab on a Chip · doi:10.1039/c7lc00046d · Cited by 458
All‐Printed Flexible and Stretchable Electronics
Mohammed, M. G., & Kramer, R. (2017) · Advanced Materials · doi:10.1002/adma.201604965 · Cited by 410
Soft Multifunctional Composites and Emulsions with Liquid Metals
Kazem, N., Hellebrekers, T., & Majidi, C. (2017) · Advanced Materials · doi:10.1002/adma.201605985 · Cited by 404
Harris, K. D., Elias, A. L., & Chung, H.-J. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9643-3 · Cited by 403
Liquid Metal Direct Write and 3D Printing: A Review
Neumann, T. V., & Dickey, M. D. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000070 · Cited by 332
Methods to pattern liquid metals
Joshipura, I. D., Ayers, H. R., Majidi, C., & Dickey, M. D. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc00330j · Cited by 326
Fast Fabrication of Flexible Functional Circuits Based on Liquid Metal Dual‐Trans Printing
Wang, Q., Yu, Y., Yang, J., & Liu, J. (2015) · Advanced Materials · doi:10.1002/adma.201502200 · Cited by 310
Gallium Liquid Metal: The Devil's Elixir
Tang, S.-Y., Tabor, C., Kalantar-Zadeh, K., & Dickey, M. D. (2021) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080819-125403 · Cited by 305
Jeong, Y. R., Kim, J., Xie, Z., Xue, Y., Won, S. M., Lee, G., Jin, S. W., Hong, S. Y., Feng, X., Huang, Y., et al. (2017) · NPG Asia Materials · doi:10.1038/am.2017.189 · Cited by 296
Design of conductive composite elastomers for stretchable electronics
Park, M., Park, J., & Jeong, U. (2014) · Nano Today · doi:10.1016/j.nantod.2014.04.009 · Cited by 295
Liquid-Phase Gallium–Indium Alloy Electronics with Microcontact Printing
Tabatabai, A., Fassler, A., Usiak, C., & Majidi, C. (2013) · Langmuir · doi:10.1021/la401245d · Cited by 293
Masked Deposition of Gallium‐Indium Alloys for Liquid‐Embedded Elastomer Conductors
Kramer, R. K., Majidi, C., & Wood, R. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203589 · Cited by 288
Doudrick, K., Liu, S., Mutunga, E. M., Klein, K. L., Damle, V., Varanasi, K. K., & Rykaczewski, K. (2014) · Langmuir · doi:10.1021/la5012023 · Cited by 285
Vacuum filling of complex microchannels with liquid metal
Lin, Y., Gordon, O., Khan, M. R., Vasquez, N., Genzer, J., & Dickey, M. D. (2017) · Lab on a Chip · doi:10.1039/c7lc00426e · Cited by 257
A Path Beyond Metal and Silicon:Polymer/Nanomaterial Composites for Stretchable Strain Sensors
Qiu, A., Li, P., Yang, Z., Yao, Y., Lee, I., & Ma, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806306 · Cited by 237
Material approaches to stretchable strain sensors
Park, J., You, I., Shin, S., & Jeong, U. (2015) · ChemPhysChem · doi:10.1002/cphc.201402810 · Cited by 216
Nanofabrication for all-soft and high-density electronic devices based on liquid metal
Kim, M.-G., Brown, D. K., & Brand, O. (2020) · Nature Communications · doi:10.1038/s41467-020-14814-y · Cited by 186
Metadata
- Authors
- Jeong, S. H., Hagman, A., Hjort, K., Jobs, M., Sundqvist, J., & Wu, Z.
- Venue
- Lab on a Chip
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 12
- Issue
- 22
- Pages
- 4657
- ISSN
- 1473-0189 (ISSN-L)
- 1473-0197
- OpenAlex
- W2052751827
- Cited by
- 218
- References
- 1
- FWCI
- 8.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.