High-performance CO2 sorbents from algae
Open accessThe DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
Highly porous N-doped carbon materials with apparent surface areas in the 1300–2400 m2 g−1 range and pore volumes up to 1.2 cm3 g−1 have been synthesized from hydrothermal carbons obtained from mixtures of algae and glucose. The porosity of these materials is made up of uniform micropores, most of them having sizes <1 nm. Moreover, they have N contents in the 1.1–4.7 wt% range, and the heteroatom is mainly a pyridone-type structure. These microporous carbons present unprecedented large CO2 capture capacities, up to 7.4 mmol g−1 (1 bar, 0 °C). The importance of the pore size on the CO2 capture capacity of microporous carbon materials is clearly demonstrated. Indeed, a good correlation between the CO2 capture capacity at sub-atmospheric pressure and the volume of narrow micropores is observed. The results suggest that pyridinic-N, pyridonic/pyrrolic-N and quaternary-N do not contribute significantly to the CO2 adsorption capacity, owing probably to their low basicity in comparison with amines. These findings will help the design of high-performance CO2 capture sorbents.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Biodiesel from microalgae beats bioethanol
Chisti, Y. (2008) · Trends in Biotechnology · doi:10.1016/j.tibtech.2007.12.002 · Cited by 2,128
Development and Evaluation of Porous Materials for Carbon Dioxide Separation and Capture
Bae, Y., & Snurr, R. Q. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101891 · Cited by 1,208
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Self-citationImportance of algae oil as a source of biodiesel
Demirbas, A., & Fatih Demirbas, M. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.06.055 · Cited by 1,030
Commercialization potential of microalgae for biofuels production
Singh, J., & Gu, S. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.06.014 · Cited by 1,001
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Self-citationNitrogen‐Containing Hydrothermal Carbons with Superior Performance in Supercapacitors
Zhao, L., Fan, L., Zhou, M., Guan, H., Qiao, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.201002647 · Cited by 893
Self-citationQuenched solid density functional theory and pore size analysis of micro-mesoporous carbons
Neimark, A. V., Lin, Y., Ravikovitch, P. I., & Thommes, M. (2009) · Carbon · doi:10.1016/j.carbon.2009.01.050 · Cited by 868
Research works printed but not linked: 5
- Frac, 2010, Afr. J. Biotechnol., 9, 9227
- Sevilla, 2011, Energy Environ. Sci., 4, 1400, 10.1039/c0ee00347f · DOI · Paper page
- Korovin, 1994, Russ. J. Appl. Chem., 67, 237
- Énnan, 1987, Ukr. Khem. Zh., 53, 584
- Kuzin, 1972, Zhurnal Prikladnoi Khimii, 45, 760
Cited by
Items 101–200 of 269
Zhao, Z., Wang, Y., Li, M., & Yang, R. (2015) · RSC Advances · doi:10.1039/c5ra01569c · Cited by 74
Patiño, J., Gutiérrez, M. C., Carriazo, D., Ania, C. O., Fierro, J. L. G., Ferrer, M. L., & del Monte, F. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00562g · Cited by 71
Mallesh, D., Anbarasan, J., Mahesh Kumar, P., Upendar, K., Chandrashekar, P., Rao, B. V. S. K., & Lingaiah, N. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147226 · Cited by 70
Ferrera-Lorenzo, N., Fuente, E., Suárez‐Ruíz, I., Gil, R. R., & Ruíz, B. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.11.006 · Cited by 71
New technologies in value addition to the thin stillage from corn-to-ethanol process
Reis, C. E. R., Rajendran, A., & Hu, B. (2017) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-017-9421-6 · Cited by 79
“Recent utilizations of transformed hydrochars include supercapacitors for electrode materials (Falco et al. 2013), and sorbents for green-house gases, such as carbon dioxide (Sevilla et al. 2012).”
Park, J., Jung, M., Jang, H., Lee, K., Attia, N. F., & Oh, H. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08603f · Cited by 73
Human hair-derived nitrogen and sulfur co-doped porous carbon materials for gas adsorption
Zhao, Z.-Q., Xiao, P.-W., Zhao, L., Liu, Y., & Han, B.-H. (2015) · RSC Advances · doi:10.1039/c5ra15690d · Cited by 68
Nitrogen-rich hierarchically porous polyaniline-based adsorbents for carbon dioxide (CO2) capture
Kutorglo, E. M., Hassouna, F., Beltzung, A., Kopecký, D., Sedlářová, I., & Šoóš, M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.133 · Cited by 69
Geng, J., Xue, D., Liu, X., Shi, Y., & Sun, L. (2016) · AIChE Journal · doi:10.1002/aic.15531 · Cited by 68
Efficient N-Doped Porous Carbonaceous CO2 Adsorbents Derived from Commercial Urea-Formaldehyde Resin
Huang, J., Bai, J., Demir, M., Hu, X. D., Jiang, Z., & Wang, L. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c00748 · Cited by 67
Manyà, J. J., García-Morcate, D., & González, B. (2020) · Applied Sciences · doi:10.3390/app10010376 · Cited by 66
Reusable nitrogen-doped mesoporous carbon adsorbent for carbon dioxide adsorption in fixed-bed
Yaumi, A. L., Bakar, M. Z. A., & Hameed, B. H. (2017) · Energy · doi:10.1016/j.energy.2017.07.130 · Cited by 66
Saadi, W., Rodríguez-Sánchez, S., Ruíz, B., Najar-Souissi, S., Ouederni, A., & Fuente, E. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.107010 · Cited by 71
Sevilla, M., Yu, L., Ania, C. O., & Titirici, M. (2014) · ChemElectroChem · doi:10.1002/celc.201402233 · Cited by 68
Self-citationRouzitalab, Z., Maklavany, D. M., Jafarinejad, S., & Rashidi, A. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.125756 · Cited by 69
Nitrogen-doped porous carbon spheres derived from d-glucose as highly-efficient CO2 sorbents
Xu, L., Guo, L., Hu, G., Chen, J., Hu, X., Wang, S., Dai, W., & Fan, M. (2015) · RSC Advances · doi:10.1039/c5ra04421a · Cited by 64
Oschatz, M., Pré, P., Dörfler, S., Nickel, W., Beaunier, P., Rouzaud, J., Fischer, C., Brunner, E., & Kaskel, S. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.041 · Cited by 70
Tian, Z., Qiu, Y., Zhou, J., Zhao, X., & Cai, J. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.05.169 · Cited by 62
Solid‐waste‐Derived carbon dioxide‐capturing materials
Wang, J., Yang, Y., Jia, Q., Shi, Y., Guan, Q., Yang, N., Ning, P., & Wang, Q. (2019) · ChemSusChem · doi:10.1002/cssc.201802655 · Cited by 60
Lee, D., Zhang, C., Wei, C., Ashfeld, B. L., & Gao, H. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13424e · Cited by 59
Chen, A., Yu, Y., Zhang, Y., Zang, W., Yu, Y., Zhang, Y., Shen, S., & Zhang, J. (2014) · Carbon · doi:10.1016/j.carbon.2014.08.003 · Cited by 60
Enhanced CO2 Adsorption on Activated Carbon Fibers Grafted with Nitrogen-Doped Carbon Nanotubes
Chiang, Y., Hsu, W.-L., Lin, S., & Juang, R. (2017) · Materials · doi:10.3390/ma10050511 · Cited by 59
Study on a nitrogen-doped porous carbon from oil sludge for CO2 adsorption
Meng, F., Gong, Z., Wang, Z., Fang, P., & Li, X. (2019) · Fuel · doi:10.1016/j.fuel.2019.04.046 · Cited by 59
Sorbent design for CO2 capture under different flue gas conditions
Marco-Lozar, J. P., Kunowsky, M., Suárez‐García, F., & Linares-Solano, A. (2014) · Carbon · doi:10.1016/j.carbon.2014.01.064 · Cited by 59
ZIF-derived in situ nitrogen decorated porous carbons for CO 2 capture
Pan, Y. H., Xue, M., Chen, M., Fang, Q., Zhu, L., Valtchev, V., & Qiu, S. (2016) · Inorganic Chemistry Frontiers · doi:10.1039/c6qi00158k · Cited by 61
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.04.088 · Cited by 58
Supraja, K. V., Doddapaneni, T. R. K. C., Praveenkumar, R., Kaushal, P., Ahammad, S. Z., Pollmann, K., & Jain, R. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145059 · Cited by 60
Xu, C., Ruan, C., Li, Y., Lindh, J., & Strømme, M. (2017) · Advanced Sustainable Systems · doi:10.1002/adsu.201700147 · Cited by 61
Li, X., Sui, Z., Sun, Y., Xiao, P., Wang, X., & Han, B. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.08.027 · Cited by 55
Enhanced CO2 Adsorption on Nitrogen-Doped Porous Carbons Derived from Commercial Phenolic Resin
Yue, L., Rao, L., Wang, L., Sun, Y. J., Wu, Z., DaCosta, H. F. M., & Hu, X. D. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03646 · Cited by 58
Porous Biochars Derived from Microalgae Pyrolysis for CO2 Adsorption
Shi, S., Ochedi, F. O., Yu, J., & Liu, Y. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c04091 · Cited by 49
Emmanuel, O., Rozina, R., & Ezeji, T. C. (2025) · Next Sustainability · doi:10.1016/j.nxsust.2025.100108 · Cited by 62
Patel, H. A., & Yavuz, C. T. (2015) · Faraday Discussions · doi:10.1039/c5fd00099h · Cited by 48
Hydrothermal Carbonization of Biomass
Titirici, M., Funke, A., & Kruse, A. (2015) · Elsevier eBooks · doi:10.1016/b978-0-444-63289-0.00012-0 · Cited by 63
Self-citationCooperative CO 2 adsorption promotes high CO 2 adsorption density over wide optimal nanopore range
Chen, L., Watanabe, T., Kanoh, H., Hata, K., & Ohba, T. (2017) · Adsorption Science & Technology · doi:10.1177/0263617417713573 · Cited by 48
Rao, L., Yue, L., Wang, L., Wu, Z., Ma, C., An, L., & Hu, X. D. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02659 · Cited by 48
Lipid-extracted algae as a source of biomaterials for algae biorefineries
Tsarpali, M., Arora, N., Kuhn, J. N., & Philippidis, G. P. (2021) · Algal Research · doi:10.1016/j.algal.2021.102354 · Cited by 48
Ferrera-Lorenzo, N., Fuente, E., Suárez‐Ruíz, I., & Ruíz, B. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.119 · Cited by 50
Hao, W., Björkman, E. E., Yun, Y., Lilliestråle, M., & Hedin, N. (2014) · ChemSusChem · doi:10.1002/cssc.201300912 · Cited by 49
Balahmar, N., & Mokaya, R. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06308k · Cited by 56
Low-cost hierarchical micro/macroporous carbon foams as efficient sorbents for CO 2 capture
Rodríguez, E., & García, R. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.09.002 · Cited by 51
Hou, Z.-Q., Luo, M., Yang, Y., Zhou, J., Liu, L., & Cai, J. (2021) · New Carbon Materials · doi:10.1016/s1872-5805(21)60020-3 · Cited by 46
Ren, M., Tianyun, Z., Wang, Y., Jia, Z., & Cai, J. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2927-7 · Cited by 44
Qi, Y., Song, B., & Qi, Y. (2016) · RSC Advances · doi:10.1039/c6ra21312j · Cited by 42
Wu, X., Tian, Z., Hu, L., Huang, S., & Cai, J. (2017) · RSC Advances · doi:10.1039/c7ra05355j · Cited by 41
Kim, H. S., Kang, M. S., Lee, S., Lee, Y., & Yoo, W. C. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.06.021 · Cited by 42
Characterization and evaluation of low-cost biomass-based-AC for CO2 capture: A review
Khoshraftar, Z., Masoumi, H., & Ghaemi, A. (2023) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2023.100373 · Cited by 41
Industrial symbiosis: Corn ethanol fermentation, hydrothermal carbonization, and anaerobic digestion
Wood, B. M., Jader, L. R., Schendel, F. J., Hahn, N. J., Valentas, K. J., McNamara, P. J., Novak, P. M., & Heilmann, S. M. (2013) · Biotechnology and Bioengineering · doi:10.1002/bit.24924 · Cited by 50
“For example, recent reports have disclosed a transformation of hydrochars into supercapacitors for electrode materials (Falco et al., 2013; Wei et al., 2011) and carbon dioxide sorbents (Sevilla et al., 2012).”
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.08.002 · Cited by 38
Shi, W., Wang, R., Liu, H., Chang, B., Yang, B., & Zhang, Z. (2019) · RSC Advances · doi:10.1039/c9ra03659h · Cited by 39
Luo, H., Zhu, C., Tan, Z. C., Bao, L., Wang, J., Miao, G., Kong, L., & Sun, Y. H. (2016) · RSC Advances · doi:10.1039/c6ra04106j · Cited by 37
Han, J., Lee, K., Choi, M. S., Park, H. S., Kim, W., & Roh, K. C. (2019) · Carbon letters · doi:10.1007/s42823-019-00018-y · Cited by 35
Garg, S., & Das, P. (2019) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-019-00506-1 · Cited by 36
Chiang, Y., Wu, C.-Y., & Chen, Y.-J. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116040 · Cited by 36
Munusamy, K., Somani, R. S., & Bajaj, H. C. (2015) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2015.05.010 · Cited by 36
Shi, J., Xu, J., Cui, H., Yan, N., Yan, R., & Weng, Y. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.129756 · Cited by 38
Shahkarami, S., Dalai, A. K., Soltan, J., Hu, Y., & Wang, D. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00470 · Cited by 35
Nanoporous Carbon Synthesis: An Old Story with Exciting New Chapters
Mestre, A. S., & Carvalho, A. P. (2018) · InTech eBooks · doi:10.5772/intechopen.72476 · Cited by 45
“ZnCl2 Salix psammophila 839–1308 [68] Coconut shell (+ H2O2) 1652–1744 VMeso/VTotal = 50–60% [52] Sewage sludge 417–519 VMeso/VTotal = 53–66% and N,S-doped [53] Tobacco stem 297–1347 [69] H3PO4 Glucose, sucrose 1750–2120 Spherical particles [60] Rattan sawdust (Calamus gracilis) 1151 [70] KOH D-Glucosamine 600 N-doped…”
InfluentialSynthesis of Nitrogen and Sulfur Codoped Nanoporous Carbons from Algae: Role in CO2 Separation
Saha, D., Thorpe, R., Bramer, S. E. V., Alexander, N., Hensley, D. K., Orkoulas, G., & Chen, J. (2018) · ACS Omega · doi:10.1021/acsomega.8b02892 · Cited by 34
Liu, Y., Liu, J., Yao, W., Cen, W., Wang, H., Weng, X., & Wu, Z. (2013) · RSC Advances · doi:10.1039/c3ra42597e · Cited by 35
Cai, W., Zhang, S., Hu, X. D., & Jaroniec, M. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02097 · Cited by 34
Prospect of Post-Combustion Carbon Capture Technology and Its Impact on the Circular Economy
Olabi, A. G., Wilberforce, T., Sayed, E. T., Shehata, N., Alami, A. H., Maghrabie, H. M., & Abdelkareem, M. A. (2022) · Energies · doi:10.3390/en15228639 · Cited by 38
Nitrogen‐Functionalized Hydrothermal Carbon Materials by Using Urotropine as the Nitrogen Precursor
Straten, J. W., Schleker, P. P. M., Krasowska, M., Veroutis, E., Granwehr, J., Auer, A. A., Hetaba, W., Becker, S., Schlögl, R., & Heumann, S. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201800341 · Cited by 34
Porous Carbons for Carbon Dioxide Capture
Lu, A., Hao, G., & Zhang, X.-Q. (2014) · Green chemistry and sustainable technology · doi:10.1007/978-3-642-54646-4_2 · Cited by 36
“[19] prepared the highly porous N-doped carbons through chemical activation of hydrothermal carbons derived from mixtures of algae and glucose.”
Evolution of porosity in carbide-derived carbon aerogels
Oschatz, M., Nickel, W., Thommes, M., Cychosz, K. A., Leistner, M., Adam, M., Mondin, G., Strubel, P., Borchardt, L., & Kaskel, S. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03401e · Cited by 33
Pentaethylenehexamine-Loaded Hierarchically Porous Silica for CO2 Adsorption
Ji, C., Huang, X. W., Li, L., Xiao, F., Zhao, N., & Wei, W. (2016) · Materials · doi:10.3390/ma9100835 · Cited by 31
Lin, D., Zhang, X., Cui, X., & Chen, W. (2014) · RSC Advances · doi:10.1039/c4ra04545a · Cited by 30
Wu, Q., Li, W., Tan, J., & Liu, S. (2014) · RSC Advances · doi:10.1039/c4ra12134a · Cited by 30
Salt Templating with Pore Padding: Hierarchical Pore Tailoring towards Functionalised Porous Carbons
Kumar, K. V., Gadipelli, S., Preuß, K., Porwal, H., Zhao, T., Guo, Z., & Titirici, M. (2016) · ChemSusChem · doi:10.1002/cssc.201601195 · Cited by 28
Self-citationMicroporous Humins Prepared from Sugars and Bio-Based Polymers in Concentrated Sulfuric Acid
Björnerbäck, F., & Hedin, N. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04658 · Cited by 28
Chiang, Y., & Chin, W.-T. (2022) · Nanomaterials · doi:10.3390/nano12091492 · Cited by 32
Removal of CO2 from Flue Gas Using Seaweed Porous Carbons Prepared by Urea Doping and KOH Activation
Shi, S., Ochedi, F. O., Cui, S., & Liu, Y. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03200 · Cited by 26
Utilizing transient breakthroughs for evaluating the potential of Kureha carbon for CO2 capture
Yu, H., Wang, X., Xu, C., Chen, D., Zhu, W., & Krishna, R. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.01.091 · Cited by 28
Dursun, B., Şar, T., Ata, A., Morcrette, M., Akbaş, M. Y., & Demir‐Cakan, R. (2016) · Cellulose · doi:10.1007/s10570-016-0966-2 · Cited by 26
Chang, B., Sun, L. G., Shi, W., Zhang, S., & Yang, B. (2018) · ACS Omega · doi:10.1021/acsomega.7b02056 · Cited by 29
Modulating the porosity of N-doped carbon materials for enhanced CO 2 capture and methane uptake
Albeladi, N., & Mokaya, R. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta03273j · Cited by 27
Aggarwal, P., Umar, F., & Paul, A. (2025) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c03047 · Cited by 27
Kim, H. S., Kang, M. S., & Yoo, W. C. (2018) · Bulletin of the Korean Chemical Society · doi:10.1002/bkcs.11389 · Cited by 24
Mousavi, M., Martis, V., & Fini, E. H. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c03827 · Cited by 24
Rao, L., Liu, S., Chen, J., Wang, L., An, L., Yang, P., & Hu, X. D. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b03473 · Cited by 26
Mallesh, D., Swapna, S., Rajitha, P., Soujanya, Y., Sumana, C., & Lingaiah, N. (2023) · Carbon letters · doi:10.1007/s42823-023-00487-2 · Cited by 23
“The adsorption capacities of carbon samples not only depended on porosity, but also depend on basic functional groups of nitrogen, oxygen and sulfur present in it [69].”
Licursi, D., Antonetti, C., Fidio, N. D., Fulignati, S., Benito, P., Puccini, M., Vitolo, S., & Galletti, A. M. R. (2023) · Waste Management · doi:10.1016/j.wasman.2023.06.012 · Cited by 24
Peredo-Mancilla, D., Hort, C., Jeguirim, M., Ghimbeu, C. M., Limousy, L., & Bessières, D. (2018) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.8b00297 · Cited by 25
Industrial-Scale hydrothermal carbonization of waste sludge materials for fuel production
Child, M. (2014) · Doria (University of Helsinki) · Cited by 52
Carbon dioxide capture and utilization in post-combustion: a review
Nouri, E., Raouf, F., Alyani, S. J., Kardan, A., & Moghaddam, A. M. (2025) · Environmental Science and Pollution Research · doi:10.1007/s11356-025-36546-6 · Cited by 27
Present and Future Prospect of Algae: A Potential Candidate for Sustainable Pollution Mitigation
Tripathy, A., More, R. D., Gupta, S., Samuel, J., Singh, J., & Prasad, R. (2021) · The Open Biotechnology Journal · doi:10.2174/1874070702115010142 · Cited by 25
Varghese, S. M., Chowdhury, A. R., Arnepalli, D. N., & Gangavarapu, R. R. (2023) · Carbon Trends · doi:10.1016/j.cartre.2023.100250 · Cited by 23
Querejeta, N., Gil, M. V., Rubiera, F., & Pevida, C. (2023) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.2210 · Cited by 28
Electrospun graphene carbon nanofibers for CO2 capture and storage: A review
Othman, F. E. C., Yusof, N. B., Ismail, A. F., Ilyas, R. A., & Low, H. Y. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.112014 · Cited by 22
Green preparation of tuneable carbon–silica composite materials from wastes
Jiang, T., Budarin, V. L., Shuttleworth, P. S., Ellis, G., Parlett, C. M. A., Wilson, K., MacQuarrie, D. J., & Hunt, A. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02494c · Cited by 21
Wang, M., Fu, J., Zhu, J., Yan, Y. P., & Xu, Q. J. (2015) · RSC Advances · doi:10.1039/c5ra02823j · Cited by 22
Shi, R., Liu, B., Jiang, Y.-W., Xu, X., Wang, H., Zeng, Z., & Li, L. (2021) · ACS Omega · doi:10.1021/acsomega.1c04618 · Cited by 20
Hao, W., Björnerbäck, F., Trushkina, Y., Bengoechea, M. O., Salazar‐Alvarez, G., Barth, T., & Hedin, N. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.08.033 · Cited by 20
RetractedUrea-formaldehyde derived porous carbons for adsorption of CO 2
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2016) · RSC Advances · doi:10.1039/c6ra24634f · Cited by 22
Microporous Humins Synthesized in Concentrated Sulfuric Acid Using 5-Hydroxymethyl Furfural
Björnerbäck, F., Bernin, D., & Hedin, N. (2018) · ACS Omega · doi:10.1021/acsomega.8b01274 · Cited by 20
The Application of Hollow Carbon Nanofibers Prepared by Electrospinning to Carbon Dioxide Capture
Chiang, Y., Chin, W.-T., & Huang, C.-C. (2021) · Polymers · doi:10.3390/polym13193275 · Cited by 19
Fidio, N. D., Licursi, D., Puccini, M., Vitolo, S., & Galletti, A. M. R. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.139359 · Cited by 18
Alhwaige, A. A., Ishida, H., & Qutubuddin, S. (2024) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.4c00232 · Cited by 19
Liu, Y., Chen, Y., Tian, L., & Hu, R. (2016) · Journal of Porous Materials · doi:10.1007/s10934-016-0294-9 · Cited by 19
Sultana, A. I., Chambers, C., Ahmed, M. M. N., Pathirathna, P., & Reza, T. (2022) · Nanomaterials · doi:10.3390/nano12203575 · Cited by 17
“[21] developed superactivated hydrochar (with apparent surface area of 2400 m2/g and pore volume of 1.”
Metadata
- Authors
- Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Max Planck Institute of Colloids and Interfaces (DE)
- Corresponding author
- Sevilla, Marta
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 2
- Issue
- 33
- Pages
- 12792
- ISSN
- 2046-2069 (ISSN-L)
- OpenAlex
- W2072986317
- Cited by
- 269
- References
- 40
- Citations by year
- 2026: 7 · 2025: 17 · 2024: 16 · 2023: 19 · 2022: 17 · 2021: 17 · 2020: 10 · 2019: 23 · 2018: 29 · 2017: 24 · 2016: 27 · 2015: 26 · 2014: 26 · 2013: 11
- FWCI
- 30.82
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- RSC Advances (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Publication Database GFZ (GFZ German Research Centre for Geosciences) (submittedVersion)
- Publication Database IASS (Institute for Advanced Sustainability Studies (IASS)) (submittedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Keywords
- CO2 capture, nitrogen-doped carbon, hydrothermal carbonization, glucose, microporous carbon, pore size effects, pyridinic nitrogen, graphitic nitrogen, CO2 adsorption capacity, sub-atmospheric pressure, carbon adsorbents
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.