High-performance CO2 sorbents from algae
Open accessThe DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
Highly porous N-doped carbon materials with apparent surface areas in the 1300–2400 m2 g−1 range and pore volumes up to 1.2 cm3 g−1 have been synthesized from hydrothermal carbons obtained from mixtures of algae and glucose. The porosity of these materials is made up of uniform micropores, most of them having sizes <1 nm. Moreover, they have N contents in the 1.1–4.7 wt% range, and the heteroatom is mainly a pyridone-type structure. These microporous carbons present unprecedented large CO2 capture capacities, up to 7.4 mmol g−1 (1 bar, 0 °C). The importance of the pore size on the CO2 capture capacity of microporous carbon materials is clearly demonstrated. Indeed, a good correlation between the CO2 capture capacity at sub-atmospheric pressure and the volume of narrow micropores is observed. The results suggest that pyridinic-N, pyridonic/pyrrolic-N and quaternary-N do not contribute significantly to the CO2 adsorption capacity, owing probably to their low basicity in comparison with amines. These findings will help the design of high-performance CO2 capture sorbents.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Biodiesel from microalgae beats bioethanol
Chisti, Y. (2008) · Trends in Biotechnology · doi:10.1016/j.tibtech.2007.12.002 · Cited by 2,128
Development and Evaluation of Porous Materials for Carbon Dioxide Separation and Capture
Bae, Y., & Snurr, R. Q. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101891 · Cited by 1,208
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Self-citationImportance of algae oil as a source of biodiesel
Demirbas, A., & Fatih Demirbas, M. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.06.055 · Cited by 1,030
Commercialization potential of microalgae for biofuels production
Singh, J., & Gu, S. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.06.014 · Cited by 1,001
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Self-citationNitrogen‐Containing Hydrothermal Carbons with Superior Performance in Supercapacitors
Zhao, L., Fan, L., Zhou, M., Guan, H., Qiao, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.201002647 · Cited by 893
Self-citationQuenched solid density functional theory and pore size analysis of micro-mesoporous carbons
Neimark, A. V., Lin, Y., Ravikovitch, P. I., & Thommes, M. (2009) · Carbon · doi:10.1016/j.carbon.2009.01.050 · Cited by 868
Research works printed but not linked: 5
- Frac, 2010, Afr. J. Biotechnol., 9, 9227
- Sevilla, 2011, Energy Environ. Sci., 4, 1400, 10.1039/c0ee00347f · DOI · Paper page
- Korovin, 1994, Russ. J. Appl. Chem., 67, 237
- Énnan, 1987, Ukr. Khem. Zh., 53, 584
- Kuzin, 1972, Zhurnal Prikladnoi Khimii, 45, 760
Cited by
Titirici, M.-M., White, R. J., Brun, N., Budarin, V. L., Su, D. S., del Monte, F., Clark, J. H., & MacLachlan, M. J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00232f · Cited by 1,277
Self-citationRecent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
A search for selectivity to enable CO2 capture with porous adsorbents
Oschatz, M., & Antonietti, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02110k · Cited by 612
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Assessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Self-citationAn overview of activated carbons utilization for the post-combustion carbon dioxide capture
Rashidi, N. A., & Yusup, S. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.11.002 · Cited by 394
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity
Alabadi, A., Razzaque, S., Yang, Y., Chen, S., & Tan, B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.032 · Cited by 322
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
Activated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2
Hao, W., Björkman, E., Lilliestråle, M., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.028 · Cited by 277
Saha, D., & Kienbaum, M. J. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.05.051 · Cited by 275
Wen, C., Liu, T., Wang, D., Wang, Y., Chen, H., Luo, G., Zhou, Z., Li, C., & Xu, M. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101098 · Cited by 252
Rao, L., Liu, S., Wang, L., Ma, C., Wu, J., An, L., & Hu, X. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.065 · Cited by 254
Ashourirad, B., Sekizkardes, A. K., Altarawneh, S., & El-Kaderi, H. M. (2015) · Chemistry of Materials · doi:10.1021/cm504435m · Cited by 245
Rational design of tailored porous carbon-based materials for CO2 capture
Zhang, Z., Cano, Z. P., Luo, D., Dou, H., Yu, A., & Chen, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07297g · Cited by 238
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Recent advances in carbon nanospheres: synthetic routes and applications
Zhang, P., Qiao, Z.-A., & Dai, S. (2015) · Chemical Communications · doi:10.1039/c5cc01759a · Cited by 225
Malini, K., Selvakumar, D., & Kumar, N. S. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102318 · Cited by 223
Sevilla, M., & Fuertes, A. B. (2016) · ChemSusChem · doi:10.1002/cssc.201600426 · Cited by 219
Self-citationAbd, A. A., Othman, M. R., & Kim, J. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15121-9 · Cited by 216
Boyjoo, Y., Cheng, Y., Zhong, H., Tian, H., Pan, J., Pareek, V. K., Jiang, S. P., Lamonier, J.-F., Jaroniec, M., & Liu, J. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.030 · Cited by 216
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100045 · Cited by 208
Sánchez-Sánchez, Á., Suárez-García, F., Martínez-Alonso, A., & Tascón, J. M. D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506176e · Cited by 198
Liu, R., Shi, X., Wang, C., Gao, Y., Xu, S., Hao, G., Chen, S., & Lu, A. (2021) · ChemSusChem · doi:10.1002/cssc.202002677 · Cited by 194
Yang, M., Guo, L., Hu, G., Hu, X., Xu, L., Chen, J., Dai, W., & Fan, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01311 · Cited by 193
Falco, C., Sieben, J. M., Brun, N., Sevilla, M., van der Mauelen, T., Morallón, E., Cazorla‐Amorós, D., & Titirici, M. (2013) · ChemSusChem · doi:10.1002/cssc.201200817 · Cited by 192
Self-citationNitrogen enriched porous carbons from d-glucose with excellent CO2 capture performance
Rao, L., Ma, R., Liu, S., Wang, L., Wu, Z., Yang, J., & Hu, X. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.093 · Cited by 193
Hydrothermal synthesis of microalgae-derived microporous carbons for electrochemical capacitors
Sevilla, M., Gu, W., Falco, C., Titirici, M. M., Fuertes, A. B., & Yushin, G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.046 · Cited by 190
Self-citationActivated carbons—preparation, characterization and their application in CO2 capture: A review
Serafin, J., & Dziejarski, B. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-28023-9 · Cited by 179
Bai, R., Yang, M., Hu, G., Xu, L., Hu, X., Li, Z., Wang, S., Dai, W., & Fan, M. (2015) · Carbon · doi:10.1016/j.carbon.2014.09.079 · Cited by 177
“[32] Sevilla M, Falco C, Titirici MM, Fuertes AB.”
Wang, L., Rao, L., Xia, B., Wang, L., Yue, L., Liang, Y., DaCosta, H., & Hu, X. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.003 · Cited by 172
From Soybean residue to advanced supercapacitors
Ferrero, G. A., Fuertes, A. B., & Sevilla, M. (2015) · Scientific Reports · doi:10.1038/srep16618 · Cited by 172
Self-citationHou, Y., Huang, G., Li, J., Yang, Q., Huang, S., & Cai, J. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.104694 · Cited by 168
Surface modifications of carbonaceous materials for carbon dioxide adsorption: A review
Chiang, Y.-C., & Juang, R.-S. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2016.12.014 · Cited by 166
Recent advances in functionalized composite solid materials for carbon dioxide capture
Yaumi, A. L., Bakar, M. Z. A., & Hameed, B. H. (2017) · Energy · doi:10.1016/j.energy.2017.02.053 · Cited by 165
Zhu, X., Liu, Y., Qian, F., Zhou, C., Zhang, S., & Chen, J. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00153 · Cited by 162
Huang, G., Wang, Y. X., Tianyun, Z., Wu, X., & Cai, J. (2019) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2018.12.024 · Cited by 154
Carbonaceous materials as adsorbents for CO2 capture: synthesis and modification
Gao, X., Yang, S., Hu, L., Cai, S., Wu, L., & Kawi, S. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100039 · Cited by 151
Efficient CO2 Capture by Porous Carbons Derived from Coconut Shell
Yang, J., Yue, L., Hu, X., Wang, L., Zhao, Y., Lin, Y., Sun, Y., DaCosta, H., & Guo, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00633 · Cited by 150
Adeniran, B., & Mokaya, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b05020 · Cited by 142
State-of-the-art review on capture of CO2 using adsorbents prepared from waste materials
Ochedi, F. O., Liu, Y., & Adewuyi, Y. G. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.03.036 · Cited by 140
Kumar, K. V., Preuss, K., Lu, L., Guo, Z. X., & Titirici, M. M. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06017 · Cited by 135
Self-citationDevelopment of a cost-effective CO2 adsorbent from petroleum coke via KOH activation
Jang, E., Choi, S. W., Hong, S. M., Shin, S., & Lee, K. B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.08.075 · Cited by 142
Shi, S., & Liu, Y. (2021) · Fuel · doi:10.1016/j.fuel.2021.121762 · Cited by 136
Microporous carbonaceous adsorbents for CO 2 separation via selective adsorption
Zhao, Y., Liu, X., & Han, Y. (2015) · RSC Advances · doi:10.1039/c5ra00569h · Cited by 133
Li, Y., Li, D., Rao, Y., Zhao, X., & Wu, M. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.036 · Cited by 135
In-situ ion-activated carbon nanospheres with tunable ultramicroporosity for superior CO2 capture
Zhang, Z., Luo, D., Lui, G., Li, G., Jiang, G., Cano, Z. P., Deng, Y., Du, X., Song, Y., Chen, Y., et al. (2018) · Carbon · doi:10.1016/j.carbon.2018.10.096 · Cited by 138
Liu, S., Ma, R., Hu, X., Wang, L., Wang, X., Radosz, M., & Fan, M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02127 · Cited by 133
Ren, M., Jia, Z., Tian, Z., López, D., Cai, J., Titirici, M., & Jorge, A. B. (2018) · ChemElectroChem · doi:10.1002/celc.201800603 · Cited by 135
Self-citationFerrera-Lorenzo, N., Fuente, E., Bermúdez, J. M., Suárez-Ruiz, I., & Ruiz, B. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2013.10.047 · Cited by 128
Yang, Z., Zhang, G., Xu, Y., & Zhao, P. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.06.021 · Cited by 129
Porous Carbon Supports: Recent Advances with Various Morphologies and Compositions
Zhang, P., Zhu, H., & Dai, S. (2015) · ChemCatChem · doi:10.1002/cctc.201500368 · Cited by 138
Carbon materials as CO2 adsorbents: a review
Sharma, A., Jindal, J., Mittal, A. K., Kumari, K., Maken, S., & Kumar, N. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01153-z · Cited by 146
Superior CO2 uptake on nitrogen doped carbonaceous adsorbents from commercial phenolic resin
Liu, S., Rao, L., Yang, P., Wang, X., Wang, L., Ma, R., Yue, L., & Hu, X. (2020) · Journal of Environmental Sciences · doi:10.1016/j.jes.2020.04.006 · Cited by 126
Efficient CO2 Adsorption on Nitrogen-Doped Porous Carbons Derived from d-Glucose
Yue, L., Rao, L., Wang, L., An, L., Hou, C., Ma, C., DaCosta, H., & Hu, X. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01028 · Cited by 126
Management of surgical mask waste to activated carbons for CO2 capture
Serafin, J., Sreńscek-Nazzal, J., Kamińska, A., Paszkiewicz, O., & Michalkiewicz, B. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101970 · Cited by 124
Lignin-Based Porous Supraparticles for Carbon Capture
Zhao, B., Borghei, M., Zou, T., Wang, L., Johansson, L., Majoinen, J., Sipponen, M. H., Österberg, M., Mattos, B. D., & Rojas, O. J. (2021) · ACS Nano · doi:10.1021/acsnano.0c10307 · Cited by 129
Designed porous carbon materials for efficient CO2 adsorption and separation
Zhang, X.-Q., Li, W., & Lu, A. (2015) · New Carbon Materials · doi:10.1016/s1872-5805(15)60203-7 · Cited by 139
Fuertes, A. B., & Sevilla, M. (2015) · Carbon · doi:10.1016/j.carbon.2015.06.028 · Cited by 127
Self-citationDesigning Carbon‐Based Porous Materials for Carbon Dioxide Capture
Singh, R., Wang, L., Ostrikov, K., & Huang, J. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202202290 · Cited by 125
Nitrogen-Doped Porous Carbons from Lotus Leaf for CO2 Capture and Supercapacitor Electrodes
Liu, S., Yang, P., Wang, L., Li, Y., Wu, Z., Ma, R., Wu, J., & Hu, X. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00886 · Cited by 116
Porous materials for carbon dioxide capture
Lu, A., & Hao, G. (2013) · Annual Reports Section A (Inorganic Chemistry) · doi:10.1039/c3ic90003g · Cited by 124
Madhu, R., Veeramani, V., & Chen, S. (2014) · Scientific Reports · doi:10.1038/srep04679 · Cited by 115
Yaumi, A. L., Bakar, M. Z. A., & Hameed, B. H. (2018) · Energy · doi:10.1016/j.energy.2018.04.183 · Cited by 113
Guo, L., Yang, J., Hu, G., Hu, X., Wang, L., Dong, Y., DaCosta, H., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00327 · Cited by 112
Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Zhu, X.-L., Wang, P.-Y., Peng, C., Yang, J., & Yan, X.-B. (2014) · Chinese Chemical Letters · doi:10.1016/j.cclet.2014.03.039 · Cited by 112
Rouzitalab, Z., Mohammady Maklavany, D., Rashidi, A., & Jafarinejad, S. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.10.035 · Cited by 109
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2017.12.203 · Cited by 114
Sivadas, D. L., Vijayan, S., Rajeev, R., Ninan, K. N., & Prabhakaran, K. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.057 · Cited by 111
Hydrothermal preparation of hierarchical ZIF-L nanostructures for enhanced CO2 capture
Ding, B., Wang, X., Xu, Y., Feng, S., Ding, Y., Pan, Y., Xu, W., & Wang, H. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.02.047 · Cited by 103
Carbon Dioxide Adsorption on Porous and Functionalized Activated Carbon Fibers
Chiang, Y.-C., Yeh, C.-Y., & Weng, C.-H. (2019) · Applied Sciences · doi:10.3390/app9101977 · Cited by 102
Byun, J., Je, S. H., Patel, H. A., Coşkun, A., & Yavuz, C. T. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00698d · Cited by 98
Yang, M., Guo, L., Hu, G., Hu, X., Chen, J., Shen, S., Dai, W., & Fan, M. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04038 · Cited by 96
Guo, L., Zhang, Y., & Li, W. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.01.003 · Cited by 97
Mashhadimoslem, H., Vafaeinia, M., Khosrowshahi, M. S., Ghaemi, A., Fathalian, F., & Maleki, A. R. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c02754 · Cited by 99
Tian, Z., Xiang, M., Zhou, J., Hu, L., & Cai, J. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.06.053 · Cited by 97
Li, D., Zhou, J., Zhang, Z., Li, L., Tian, Y., Lu, Y., Qiao, Y., Li, J., & Wen, L. (2016) · Carbon · doi:10.1016/j.carbon.2016.12.039 · Cited by 95
Efficient CO2 Capture by Nitrogen-Doped Biocarbons Derived from Rotten Strawberries
Yue, L., Rao, L., Wang, L., Wang, L., Wu, J., Hu, X., DaCosta, H., Yang, J., & Fan, M. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b02692 · Cited by 88
Babu, D. J., Bruns, M., Schneider, R., Gerthsen, D., & Schneider, J. J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b11686 · Cited by 88
Superior CO 2 adsorption from waste coffee ground derived carbons
Travis, W., Gadipelli, S., & Guo, Z. (2015) · RSC Advances · doi:10.1039/c4ra13026j · Cited by 86
Yuan, B., Wang, J., Chen, Y., Wu, X., Luo, H., & Deng, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08436a · Cited by 83
Zhu, M., Cai, W., Verpoort, F., & Zhou, J. (2019) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2019.03.044 · Cited by 83
Yuan, X., Choi, S. W., Jang, E., & Lee, K. B. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.168 · Cited by 83
Adeniran, B., Masika, E., & Mokaya, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03565h · Cited by 80
Sevilla, M., Sangchoom, W., Balahmar, N., Fuertes, A. B., & Mokaya, R. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00809 · Cited by 89
Self-citationHao, W., Björnerbäck, F., Trushkina, Y., Oregui Bengoechea, M., Salazar-Alvarez, G., Barth, T., & Hedin, N. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02795 · Cited by 78
Effect of relative humidity on adsorption breakthrough of CO2 on activated carbon fibers
Chiang, Y.-C., Chen, Y.-J., & Wu, C.-Y. (2017) · Materials · doi:10.3390/ma10111296 · Cited by 77
Hao, W., Björkman, E. E., Lilliestråle, M., & Hedin, N. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5004569 · Cited by 79
Sui, Z., Li, X., Sun, Z., Tao, H., Zhang, P.-Y., Zhao, L., & Han, B. (2017) · Carbon · doi:10.1016/j.carbon.2017.10.003 · Cited by 74
Soft templating production of porous carbon adsorbents for CO2 and H2S capture
Nicolae, S. A., Szilágyi, P. Á., & Titirici, M. (2020) · Carbon · doi:10.1016/j.carbon.2020.07.064 · Cited by 75
Self-citationSuperior Capacitive Performance of Hydrochar‐Based Porous Carbons in Aqueous Electrolytes
Fuertes, A. B., & Sevilla, M. (2015) · ChemSusChem · doi:10.1002/cssc.201403267 · Cited by 74
Self-citationMartín-Jimeno, F. J., Suárez‐García, F., Paredes, J. I., Martínez-Alonso, A., & Tascón, J. M. D. (2014) · Carbon · doi:10.1016/j.carbon.2014.09.042 · Cited by 74
Understanding the Hydrophilicity and Water Adsorption Behavior of Nanoporous Nitrogen-Doped Carbons
Kumar, K. V., Preuß, K., Guo, Z., & Titirici, M. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b06555 · Cited by 73
Self-citationReview and analysis of porous adsorbents for effective CO2 capture
Foorginezhad, S., Weiland, F., Chen, Y., Hussain, S., & Ji, X. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115589 · Cited by 79
Metadata
- Authors
- Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Max Planck Institute of Colloids and Interfaces (DE)
- Corresponding author
- Sevilla, Marta
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 2
- Issue
- 33
- Pages
- 12792
- ISSN
- 2046-2069 (ISSN-L)
- OpenAlex
- W2072986317
- Cited by
- 269
- References
- 40
- Citations by year
- 2026: 7 · 2025: 17 · 2024: 16 · 2023: 19 · 2022: 17 · 2021: 17 · 2020: 10 · 2019: 23 · 2018: 29 · 2017: 24 · 2016: 27 · 2015: 26 · 2014: 26 · 2013: 11
- FWCI
- 30.82
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- RSC Advances (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Publication Database GFZ (GFZ German Research Centre for Geosciences) (submittedVersion)
- Publication Database IASS (Institute for Advanced Sustainability Studies (IASS)) (submittedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Keywords
- CO2 capture, nitrogen-doped carbon, hydrothermal carbonization, glucose, microporous carbon, pore size effects, pyridinic nitrogen, graphitic nitrogen, CO2 adsorption capacity, sub-atmospheric pressure, carbon adsorbents
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.