The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Ternary sulfur/polyacrylonitrile/Mg0.6Ni0.4O composite cathodes for high performance lithium/sulfur batteries
Abstract
Nanostructured magnesium nickel oxide (Mg0.6Ni0.4O) was synthesized by a self-propagating high temperature synthesis method followed by heat treatment. The particles of the resulting oxide were used as additives to prepare the sulfur/polyacrylonitrile/Mg0.6Ni0.4O (S/PAN/Mg0.6Ni0.4O) composite via wet ballmilling. The SEM observation revealed that the composite morphology was drastically changed by the addition of Mg0.6Ni0.4O, from smooth bulky particles of S/PAN to rough nanostructured agglomerates with two times the increase in the specific surface area, favouring the reactivity of the composite, and a homogeneous component distribution. Cyclic voltammetry, discharge–charge tests and ac impedance spectroscopy have shown improved conductivity and electrochemical properties of the composite by the addition of Mg0.6Ni0.4O, leading to high sulfur utilization and interfacial stabilization in a Li/S cell upon discharge–charge cycling. The cell demonstrated enhanced reversibility, resulting in a discharge capacity of about 1223 mA h g−1 at the second cycle and retained about 100% of this value over 100 cycles. Furthermore, the S/PAN/Mg0.6Ni0.4O composite cathode exhibited a good rate capability with discharge capacities of 887, 710 and 445 mA h g−1 at 0.5, 0.7 and 1 C, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Cited by
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Recent progress of high-entropy materials for energy storage and conversion
Amiri, A., & Shahbazian-Yassar, R. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09578h · Cited by 592
Lim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Design of Hollow Nanostructures for Energy Storage, Conversion and Production
Wang, J., Cui, Y., & Wang, D. (2019) · Advanced Materials · doi:10.1002/adma.201801993 · Cited by 453
Li, Z., Li, C., Ge, X., Ma, J., Zhang, Z., Li, Q., Wang, C., & Yin, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.049 · Cited by 449
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Tao, Y., Wei, Y., Liu, Y., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01662f · Cited by 362
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Sulfur‐Based Composite Cathode Materials for High‐Energy Rechargeable Lithium Batteries
Wang, J., He, Y., & Yang, J. (2015) · Advanced Materials · doi:10.1002/adma.201402569 · Cited by 331
A high-entropy metal oxide as chemical anchor of polysulfide for lithium-sulfur batteries
Zheng, Y., Yi, Y., Fan, M., Liu, H., Li, X., Zhang, R., Li, M., & Qiao, Z.-A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.030 · Cited by 315
Sulfur Cathodes with Hydrogen Reduced Titanium Dioxide Inverse Opal Structure
Liang, Z., Zheng, G., Li, W., Seh, Z. W., Yao, H., Yan, K., Kong, D., & Cui, Y. (2014) · ACS Nano · doi:10.1021/nn501308m · Cited by 313
Carbon nanotube-based materials for lithium–sulfur batteries
Zheng, M., Chi, Y., Hu, Q., Tang, H., Jiang, X., Zhang, L., Zhang, S., Pang, H., & Xu, Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05347f · Cited by 311
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Graphene materials for lithium–sulfur batteries
Yu, M., Li, R., Wu, M., & Shi, G. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.08.004 · Cited by 268
Zhou, G., Zhao, Y., Zu, C., & Manthiram, A. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.029 · Cited by 267
Self-citationRecent research trends in Li–S batteries
Kumar, R., Liu, J., Hwang, J.-Y., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01483c · Cited by 254
Metadata
- Authors
- Zhang, Y., Zhao, Y., Yermukhambetova, A., Bakenov, Z., & Chen, P.
- Venue
- J. Mater. Chem. A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 2
- Pages
- 295-301
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2034801850
- Cited by
- 227
- References
- 1
- FWCI
- 11.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.