Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage
The DOI matches its Crossref record; 38 of the 39 references it cites were found in a registry or an index.
Abstract
Embedding continuous ultrathin-graphite foams (UGFs) with volume fractions as low as 0.8–1.2 vol% in a phase change material (PCM) can increase the effective thermal conductivity by up to 18 times, with negligible change in the melting temperature or mass specific heat of fusion.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Originally, additives with high thermal conductivity were directly introduced into a system to obtain thermally conductive composite PCMs; however, the enhancement of thermal conductivity was generally limited. Moreover, this strategy inevitably reduces the TES density due to the occupation of the inherent pores.[ 4 , 15 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ]”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
In the citing paper
“Additionally, the change in the thermal performance of MPCMs was negligible after 500 thermal cycling tests due to the extraordinarily stable 3D network structure.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
Self-citationThermophysical Properties of Matter
Touloukian, Y. S. (1995) · CERN Document Server (European Organization for Nuclear Research) · Cited by 3,282
Two-Dimensional Phonon Transport in Supported Graphene
Seol, J. H., Jo, I., Moore, A. L., Lindsay, L., Aitken, Z. H., Pettes, M. T., Li, X., Yao, Z., Huang, R., Broido, D., et al. (2010) · Science · doi:10.1126/science.1184014 · Cited by 1,926
Self-citationA review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
Boomsma, K., & Poulikakos, D. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00123-x · Cited by 831
Thermal Conductivity and Phonon Transport in Suspended Few-Layer Hexagonal Boron Nitride
Jo, I., Pettes, M. T., Kim, J., Watanabe, K., Taniguchi, T., Yao, Z., & Shi, L. (2013) · Nano Letters · doi:10.1021/nl304060g · Cited by 770
Self-citation
Research works printed but not linked: 1
- L. M. Jiji , Heat Conduction , Begell House , New York , 2003
Cited by
Items 301–400 of 596
Teamah, H. M., & Teamah, M. A. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105357 · Cited by 47
Liu, Z., Hu, D., Lv, H., Zhang, Y., Wu, F., Shen, D., & Fu, P. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.02.057 · Cited by 45
Two-stage cascading desorption cycle for sorption thermal energy storage
An, G., Wang, L., & Gao, J. (2019) · Energy · doi:10.1016/j.energy.2019.03.069 · Cited by 45
3D Printing of Nacre-Inspired Structures with Exceptional Mechanical and Flame-Retardant Properties
Yang, Y., Wang, Z., He, Q., Li, X., Lu, G., Jiang, L., Zeng, Y., Bethers, B., Jin, J., Lin, S., et al. (2022) · Research · doi:10.34133/2022/9840574 · Cited by 45
Heu, C. S., Kim, S. W., Lee, K.-S., & Kim, D. R. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.063 · Cited by 44
Ashton, T. S., & Moore, A. L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.08.047 · Cited by 44
Dependence of the Thermal Conductivity of BiFeO 3 Thin Films on Polarization and Structure
Ning, S., Huberman, S., Zhang, C., Zhang, Z., Chen, G., & Ross, C. A. (2017) · Physical Review Applied · doi:10.1103/physrevapplied.8.054049 · Cited by 44
Li, W. H., Lai-Iskandar, S., Tan, D., Simonini, L., Dudon, J.-P., Leong, F. N., Tay, R. Y., Tsang, S. H., Joshi, S. C., & Teo, E. H. T. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b03013 · Cited by 44
He, S., Zeng, Z., Yang, X., Poredoš, P., Yu, J., Chen, Z., & Wang, R. Z. (2023) · ACS Energy Letters · doi:10.1021/acsenergylett.3c01836 · Cited by 43
Temirel, M., Hu, H., Shabgard, H., Boettcher, P., McCarthy, M., & Sun, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.090 · Cited by 43
“Recently, carbonbased nanoadditives, such as graphite nanofibers [20], exfoliated graphite nanoplatelets (xGnPs) [21,22], and ultrathin graphite foams [23] have been utilized to enhance the thermal conductivity of PCMs.”
Critical analysis of the T-history method: A fundamental approach
Badenhorst, H., & Cabeza, L. F. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.02.005 · Cited by 45
“been proposed to overcome this issue, largely focused on the development of composites [9-15].”
BackgroundLi, A., Dong, C., Dong, W., Yuan, F., Gao, H., Chen, X., Chen, X., & Wang, G. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.201901428 · Cited by 43
Wu, D., Gu, X., Sun, Q. F., Luo, W., Zhang, B., Peng, J., Bian, L., & Dong, K. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106861 · Cited by 47
A Review of Graphene-Based Materials/Polymer Composite Aerogels
Wang, Z., Liu, L., Zhang, Y., Huang, Y., Liu, J., Zhang, X., Liu, X., Teng, H., Zhang, X., Zhang, J., et al. (2023) · Polymers · doi:10.3390/polym15081888 · Cited by 42
Sun, Y., He, F., Wang, J., Wang, L., Baiquan, F. U., & Tang, W. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.124221 · Cited by 42
Han, D. J., Zhao, Y., Zhang, Y., & Bai, S. (2015) · RSC Advances · doi:10.1039/c5ra16780a · Cited by 42
Zhu, C., Zhao, C., Chen, Z., Zhu, R., Sheng, N., & Rao, Z. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103866 · Cited by 44
Zhao, Z., Liu, W., Du, R., Wang, S., Han, H., Jing, Y., Wu, S., Wang, R. Z., & Li, T. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154305 · Cited by 45
Paraffin/carbon aerogel phase change materials with high enthalpy and thermal conductivity
Tian, B., Yang, W., He, F., Xie, C., Zhang, K., Fan, J., & Wu, J. (2017) · Fullerenes Nanotubes and Carbon Nanostructures · doi:10.1080/1536383x.2017.1347638 · Cited by 41
Agrawal, R., Singh, K. D. P., & Paswan, M. K. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.02.159 · Cited by 46
Type II absorption thermal battery for temperature upgrading: Energy storage heat transformer
Ding, Z., & Wu, W. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119748 · Cited by 41
Thermal properties of C17H36/MCM-41 composite phase change materials
Zhang, J., Feng, Y., Yuan, H., Feng, D., Zhang, X., & Wang, G. (2015) · Computational Materials Science · doi:10.1016/j.commatsci.2015.07.033 · Cited by 41
Phonon Conduction in Silicon Nanobeam Labyrinths
Park, W., Romano, G., Ahn, C., Kodama, T., Park, J., Barako, M. T., Sohn, J., Kim, S. J., Cho, J., Marconnet, A. M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-06479-3 · Cited by 41
“Λ k S f d d ( ) ( , ) ( ) (2) bulk 0 bulk”
Shirbani, M., Siavashi, M., Hosseini, M., & Bidabadi, M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104744 · Cited by 43
Wang, H. E., Yang, H., Liu, Q., Han, R., Lu, X., Song, C., Ma, D., Ji, N., & Liu, C. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108737 · Cited by 38
Xu, H., Cao, B., Gao, L., Wang, F., Jin, G., & Liu, Z. (2024) · Building and Environment · doi:10.1016/j.buildenv.2024.111169 · Cited by 39
“Green”, innovative, versatile and efficient carbon materials from polyphenolic plant extracts
Celzard, A., & Fierro, V. (2020) · Carbon · doi:10.1016/j.carbon.2020.05.053 · Cited by 40
Enhanced cold storage performance of Na2SO4·10H2O/expanded graphite composite phase change materials
Lin, N., Li, C., Zhang, D., Li, Y., & Chen, J. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101596 · Cited by 37
Yi, H., Zhan, W., Zhao, Y., Zhang, X., Jia, F., Wang, W., Ai, Z., & Song, S. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.109935 · Cited by 37
Li, S., Wang, H., Mao, H., Li, L., & Shi, H. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102826 · Cited by 39
Fang, M., He, R., Zhou, J., Fei, H., & Yang, K. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111244 · Cited by 37
Ma, Q., & Bai, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.226 · Cited by 36
Thermo-conductive phase change materials with binary fillers of core-shell-like distribution
Xue, S., Lei, C., Liu, D., Wang, K., Wu, K., & Fu, Q. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106326 · Cited by 36
Ashton, T. S., & Moore, A. L. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9180-0 · Cited by 36
“[11–13] for use in lightweight composites and applications such as electronics, thermal energy storage, and electrochemical devices.”
BackgroundTabassum, H., Huang, X., Chen, R., & Zou, R. (2015) · Journal of Materiomics · doi:10.1016/j.jmat.2015.07.002 · Cited by 37
Zhao, P., Deng, C., Zhao, Z.-Y., Huang, S., Lu, P., & Wang, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07405 · Cited by 35
Zhang, M., Quan, B., Chen, P., Yang, Y., Ding, C., Liu, S., Wu, H., Hu, X., & Lu, X. H. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110725 · Cited by 35
Nishad, S., Ahmad, Z., & Krupa, I. (2024) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2024.112948 · Cited by 34
Recent Advances and Applications of Flexible Phase Change Composites
Lu, L., Guo, H., Martín-Fabiani, I., Zhou, Y., Willcock, H., Vladisavljević, G. T., Busfield, J. J. C., Bilotti, E., Peijs, T., Zhang, H., et al. (2025) · EcoMat · doi:10.1002/eom2.70004 · Cited by 46
Design of carbon foams for seasonal solar thermal energy storage
Jana, P., del Barrio, E. P., Fierro, V., Medjahdi, G., & Celzard, A. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.048 · Cited by 34
Thermal conductivity of sugar alcohols
Seppälä, A., Turunen, K., & Yazdani, M. R. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111796 · Cited by 34
“[35] [36] [37] [17] [38] [39] [40] [41]”
Yan, Q., Gao, J., Chen, D., Tao, P., Chen, L., Ying, J., Tan, X., Lv, L., Dai, W., Alam, F. E., et al. (2022) · Nanoscale · doi:10.1039/d2nr02265f · Cited by 34
Liu, F., Tang, R., Ma, W., & Yuan, X. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105214 · Cited by 34
Sun, L., Wang, Y., Chen, L., Ying, J., Li, Q., Fu, L., Yan, Q., Wu, K., Xue, C., Yu, J., et al. (2024) · Materials Horizons · doi:10.1039/d4mh00792a · Cited by 34
Zhang, L., Shi, Z., Zhang, B., & Huang, J. (2020) · Materials · doi:10.3390/ma13153271 · Cited by 34
“In addition, they are prone to leakage in the absence of containers and other encapsulation conditions [11,12].”
BackgroundDu, W., Zhang, J., Yin, Y., Guo, Y., & Wan, L. (2016) · Chemistry - An Asian Journal · doi:10.1002/asia.201600449 · Cited by 32
Zhang, C., Zhang, X., Qiu, L., & Zhao, Y. (2020) · Energy · doi:10.1016/j.energy.2020.118578 · Cited by 32
Hosseininaveh, H., Mohammadi, O., Faghiri, S., & Shafii, M. B. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102235 · Cited by 33
Li, A., Cheng, D., Gao, H., Chen, X., Tang, Y., & Wang, G. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.02.028 · Cited by 33
Nishad, S., Kasák, P., & Krupa, I. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107449 · Cited by 33
Zehri, A., Samani, M. K., Latorre, M. G., Nylander, A., Nilsson, T. M. J., Fu, Y., Wang, N., Ye, L., & Liu, J. (2020) · Nanotechnology · doi:10.1088/1361-6528/aba029 · Cited by 33
“44% and was reported to affects inverse proportionally the effective thermal conductivity of the high porosity GF/Ag-PCM system [13, 22].”
BackgroundLiu, G., Shang, K., Chen, S., & Shen, J. (2025) · Composites Science and Technology · doi:10.1016/j.compscitech.2025.111120 · Cited by 31
Tamraparni, A., Rendall, J., Shen, Z., Hun, D., & Shrestha, S. S. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126490 · Cited by 32
Wang, H., Wang, H., Wang, J., Luo, D., Yan, Y., & Ren, Y. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.120107 · Cited by 31
Adera, B., Ancha, V. R., Tadiwose, T., & Getahun, E. (2025) · International Journal of Thermofluids · doi:10.1016/j.ijft.2025.101418 · Cited by 37
Chen, H., Li, S., Wei, P., Gong, Y., Nie, P., Chen, X., & Wang, C. (2020) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2020.110513 · Cited by 31
Khezri, A., Sahebi, M., & Mohammadi, M. (2021) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-021-11085-7 · Cited by 34
Flame speed enhancement of a nitrocellulose monopropellant using graphene microstructures
Jain, S., Park, W., Chen, Y. P., & Qiao, L. (2016) · Journal of Applied Physics · doi:10.1063/1.4966933 · Cited by 31
Zhang, Q., Le, T. C., Zhao, S., Shang, C., Hu, M., Zhang, S., Liu, Y., & Pan, S. (2024) · Nanomaterials · doi:10.3390/nano14131126 · Cited by 34
“…used for the modification of PCMs include carbon nanotubes [59], graphene [60], graphene oxide [61], carbon nanofibers [62,63], etc. Ji et al. [64] proved that the thermal conductivity of PCM doped with 1.2 vol% of connected ultra-thin graphite foam (UGF) could be increased by 18 times, and…”
MethodInfluentialMelting enhancement of a phase change material with presence of a metallic mesh
Shuja, S. Z., Yilbaş, B. S., & Shaukat, M. M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.033 · Cited by 31
Chen, Y., Huang, Y., & Wang, M. W. A. S. (2021) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2022.018856 · Cited by 29
Li, H., Tay, R. Y., Tsang, S. H., Hubert, R., Coquet, P., Merlet, T., Foncin, J., Yu, J. J., & Teo, E. H. T. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c01462 · Cited by 29
Che, H., Chen, Q., Zhong, Q., & He, S. (2018) · e-Polymers · doi:10.1515/epoly-2017-0176 · Cited by 29
Ultralight three-dimensional, carbon-based nanocomposites for thermal energy storage
Ola, O., Chen, Y., Niu, Q., Xia, Y., Mallick, T. K., & Zhu, Y. (2019) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2019.06.014 · Cited by 28
Chakravarty, A., Bhowmik, K., De, G., & Mukherjee, A. (2014) · New Journal of Chemistry · doi:10.1039/c4nj01545b · Cited by 28
Yu, C., Youn, J. R., & Song, Y. S. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-9468-9 · Cited by 27
Shen, X., & Kim, J. (2020) · Functional Composites and Structures · doi:10.1088/2631-6331/ab953a · Cited by 28
Wang, H., Liu, X., Luo, Q., Yao, H., Xu, Q. P., Tian, Y., Wang, J., & Xuan, Y. (2022) · Nano Research · doi:10.1007/s12274-022-4450-z · Cited by 27
Li, D., Sun, H., Li, T., Yang, M., Xiong, T., & Sun, D. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121462 · Cited by 27
Magnetically- regulated close contact melting for high-power-density latent heat energy storage
Wu, S., Zhang, X., Tang, K., & Li, T. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112660 · Cited by 28
Fleming, E., Kholmanov, I. N., & Shi, L. (2018) · Carbon · doi:10.1016/j.carbon.2018.04.082 · Cited by 27
Self-citationXu, B. S., Xie, X., Pei, G., & Chen, X.-N. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114886 · Cited by 30
Atinafu, D. G., Chang, S. J., Berardi, U., Kim, K., & Kim, S. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123695 · Cited by 27
Es-Satte, M., Afaynou, I., Faraji, H., Choukairy, K., Regragui, I., Amghar, K., Boucetta, M., Saadeddine, S., & Bourich, M. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.110870 · Cited by 29
Wei, L. C., & Malen, J. A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.020 · Cited by 26
Wu, G., Hu, C., Cui, J., Chen, S., & Wang, Y. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01226 · Cited by 26
Ruiz-Calleja, T., Bonet-Aracil, M., Gisbert-Payá, J., & Bou-Belda, E. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101557 · Cited by 26
Zhu, X., Liu, J., Zhao, W., Yu, W., & Liu, X. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141882 · Cited by 26
Design and Optimization of Composite Phase Change Material for Cylindrical Thermal Energy Storage
Tamraparni, A., Hoe, A., Deckard, M. E., Zhang, C., Malone, N., Elwany, A. H., Shamberger, P. J., & Felts, J. R. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.123995 · Cited by 32
Lin, X., Jia, S., Liu, J., Wang, W., Cao, H., Guo, X., & Sun, W. (2020) · Materials Research Express · doi:10.1088/2053-1591/abb261 · Cited by 26
Effect of chain structure on the thermal conductivity of expanded graphite/polymer composites
Deng, S., Wang, J., Zong, G., Chen, F., Chai, S., & Fu, Q. (2016) · RSC Advances · doi:10.1039/c5ra26272k · Cited by 26
Zhang, X., Du, Z., Zhu, Y., Li, C. S., Hu, X., Yang, T., Yu, B., Gu, R., Ding, Y., & He, Z. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.110366 · Cited by 25
Yousefi, A., Tang, W., Khavarian, M., & Fang, C. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118570 · Cited by 27
Atinafu, D. G., Yun, B. Y., Wi, S., Chang, S. J., & Kim, S. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106650 · Cited by 26
Li, M., Wang, X., Odom, L., Bryce, K., Zhao, D. F., Shen, J., Ma, Z., Bae, C., Narayanan, S., & Lian, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c00546 · Cited by 25
Thermal Energy Storage in Energy Communities: A Perspective Overview through a Bibliometric Analysis
Brunelli, L., Borri, E., Pisello, A. L., Nicolini, A., Mateu, C., & Cabeza, L. F. (2024) · Sustainability · doi:10.3390/su16145895 · Cited by 27
Shobana, M. K., & Kim, Y. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.167 · Cited by 25
Wang, Y., Zhang, Z., Zhang, T., Qin, Z., Zhang, D., & Ji, H. (2019) · ChemistrySelect · doi:10.1002/slct.201803178 · Cited by 25
Self-citationZhang, F., Ye, C., Dai, W., Lv, L., Yuan, Q., Chee, K. W. A., Yang, K., Jiang, N., Lin, C., Zhan, Z., et al. (2019) · Chinese Chemical Letters · doi:10.1016/j.cclet.2019.04.001 · Cited by 25
Son, H. W., Heu, C. S., Lee, H. S., Kim, S. H., Mok, J. Y., Kang, S., & Kim, D. R. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123613 · Cited by 25
Yadav, S. K., Kumar, A., & Mehta, N. (2025) · Progress in Solid State Chemistry · doi:10.1016/j.progsolidstchem.2025.100519 · Cited by 24
Analyzing Thermal Conductivity of Polyethylene‐Based Compounds Filled with Copper
Weingrill, H. M., Hohenauer, W., Resch-Fauster, K., & Zauner, C. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800644 · Cited by 24
Xie, X., Xu, B. S., Chen, X.-N., & Pei, G. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.07.129 · Cited by 25
Zhang, H., Yuan, Y., Sun, Q., & Cao, X. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600601 · Cited by 26
Latent Heat Storage: Storage Materials, Heat Transfer, and Applications
Ghaib, K. (2017) · ChemBioEng Reviews · doi:10.1002/cben.201700007 · Cited by 24
Mikhaylov, A. A., Sladkevich, S., Medvedev, A. G., Prikhodchenko, P. V., Gun, J., Sakharov, K. A., Xu, Z. J., Kulish, V., Nikolaev, V. A., & Lev, O. E. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b21205 · Cited by 24
Gunasekara, S. N., Ignatowicz, M., Chiu, J. N., & Martin, V. (2019) · International Journal of Energy Research · doi:10.1002/er.4403 · Cited by 24
“These obtained thermal conductivity results, summarized in Table 3, vary compared to other previously reported values by numerous studies.(19,26-29,36-45) As was mentioned before, the liquid‐state investigation input parameters used by del Barrio et al(24) were unclear in their published work.”
ResultKumar, P. G., Kumar, G. P., Sivalingam, V., Divya, S., & Oh, T. H. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115954 · Cited by 23
Advancements in sustainable phase change materials: Valorizing waste for eco-friendly applications
Wu, W., Yeap, I. S. R., Wang, S., Tomczak, N., Lin, M., Kai, D., Ye, E., Thitsartarn, W., Tan, J. B. H., Yin, X., et al. (2024) · Materials Today Chemistry · doi:10.1016/j.mtchem.2024.102163 · Cited by 31
Zhu, J., Jiang, J., Ai, W., Fan, Z., Huang, X., Zhang, H., & Yu, T. (2014) · Nanoscale · doi:10.1039/c4nr03661a · Cited by 23
Metadata
- Authors
- Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S.
- Affiliations
- The University of Texas at Austin (US)
- Corresponding author
- Shi, Li
- Ruoff, Rodney S.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 3
- Pages
- 1185-1192
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2110264357
- Cited by
- 592
- References
- 39
- Citations by year
- 2026: 18 · 2025: 40 · 2024: 43 · 2023: 33 · 2022: 59 · 2021: 70 · 2020: 72 · 2019: 72 · 2018: 63 · 2017: 48 · 2016: 37 · 2015: 27 · 2014: 10
- FWCI
- 32.68
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy
- Advanced Research Projects Agency
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Keywords
- phase change materials, thermal conductivity enhancement, thermal energy storage, melting point, latent heat storage
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.