Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage
The DOI matches its Crossref record; 38 of the 39 references it cites were found in a registry or an index.
Abstract
Embedding continuous ultrathin-graphite foams (UGFs) with volume fractions as low as 0.8–1.2 vol% in a phase change material (PCM) can increase the effective thermal conductivity by up to 18 times, with negligible change in the melting temperature or mass specific heat of fusion.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Originally, additives with high thermal conductivity were directly introduced into a system to obtain thermally conductive composite PCMs; however, the enhancement of thermal conductivity was generally limited. Moreover, this strategy inevitably reduces the TES density due to the occupation of the inherent pores.[ 4 , 15 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ]”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
In the citing paper
“Additionally, the change in the thermal performance of MPCMs was negligible after 500 thermal cycling tests due to the extraordinarily stable 3D network structure.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
Self-citationThermophysical Properties of Matter
Touloukian, Y. S. (1995) · CERN Document Server (European Organization for Nuclear Research) · Cited by 3,282
Two-Dimensional Phonon Transport in Supported Graphene
Seol, J. H., Jo, I., Moore, A. L., Lindsay, L., Aitken, Z. H., Pettes, M. T., Li, X., Yao, Z., Huang, R., Broido, D., et al. (2010) · Science · doi:10.1126/science.1184014 · Cited by 1,926
Self-citationA review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
Boomsma, K., & Poulikakos, D. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00123-x · Cited by 831
Thermal Conductivity and Phonon Transport in Suspended Few-Layer Hexagonal Boron Nitride
Jo, I., Pettes, M. T., Kim, J., Watanabe, K., Taniguchi, T., Yao, Z., & Shi, L. (2013) · Nano Letters · doi:10.1021/nl304060g · Cited by 770
Self-citation
Research works printed but not linked: 1
- L. M. Jiji , Heat Conduction , Begell House , New York , 2003
Cited by
Items 101–200 of 596
Jung, H., Yu, S., Bae, N.-S., Cho, S. M., Kim, R. H., Cho, S. H., Hwang, I., Jeong, B., Ryu, J. S., Hwang, J., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02681 · Cited by 186
Al-Jethelah, M., Ebadi, S., Venkateshwar, K., Tasnim, S. H., Mahmud, S., & Dutta, A. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.121 · Cited by 181
Advanced/hybrid thermal energy storage technology: material, cycle, system and perspective
Ding, Z., Wu, W., & Leung, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111088 · Cited by 171
Yang, J., Li, X., Han, S., Yang, R., Min, P., & Yu, Z.-Z. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00078f · Cited by 176
Toward highly thermally conductive all-carbon composites: Structure control
Feng, W., Qin, M., & Feng, Y. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.059 · Cited by 174
High thermal conductivity phase change composite with percolating carbon fiber network
Nomura, T., Tabuchi, K., Zhu, C., Sheng, N., Wang, S., & Akiyama, T. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.05.042 · Cited by 175
Borri, E., Zsembinszki, G., & Cabeza, L. F. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116666 · Cited by 168
Tao, P., Chang, C., Tong, Z., Bao, H., Song, C., Wu, J., Shang, W., & Deng, T. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00542k · Cited by 166
Yang, H., Chao, W., Di, X., Yang, Z., Yang, T., Yu, Q., Liu, F., Li, J., Li, G., & Wang, C. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112029 · Cited by 166
Carbon fibre/graphene foam/polymer composites with enhanced mechanical and thermal properties
Zhao, Y.-H., Zhang, Y.-F., Bai, S.-L., & Yuan, X.-W. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.03.056 · Cited by 162
Shen, X., Wang, Z., Wu, Y., Liu, X., He, Y.-B., Zheng, Q., Yang, Q.-H., Kang, F., & Kim, J.-K. (2018) · Materials Horizons · doi:10.1039/c7mh00984d · Cited by 159
Dutta, V., Verma, R., Gopalkrishnan, C., Yuan, M.-H., Batoo, K. M., Jayavel, R., Chauhan, A., Lin, K. A., Ravindran, B., & Ghotekar, S. K. (2022) · Inorganics · doi:10.3390/inorganics10100169 · Cited by 170
Exploring Next‐Generation Functional Organic Phase Change Composites
Yang, J., Zhou, Y., Yang, L., Feng, C., Bai, L., Yang, M., & Yang, W. M. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200792 · Cited by 178
Hu, H. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108094 · Cited by 166
Highly Compressive Boron Nitride Nanotube Aerogels Reinforced with Reduced Graphene Oxide
Wang, M., Zhang, T., Mao, D., Yao, Y., Zeng, X., Ren, L., Cai, Q., Mateti, S., Li, L. H., Zeng, X., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b03225 · Cited by 156
Yang, H., Wang, Y., Yu, Q., Cao, G., Sun, X., Yang, R., Zhang, Q., Liu, F., Di, X., Li, J., et al. (2018) · Energy · doi:10.1016/j.energy.2018.06.207 · Cited by 157
Chen, G., Su, Y., Jiang, D., Pan, L., & Li, S. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114786 · Cited by 155
Review on Nano Enhanced PCMs: Insight on nePCM Application in Thermal Management/Storage Systems
Mebarek‐Oudina, F., & Chabani, I. (2023) · Energies · doi:10.3390/en16031066 · Cited by 164
Preparation and thermal properties of short carbon fibers/erythritol phase change materials
Zhang, Q., Luo, Z., Guo, Q., & Wu, G. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.023 · Cited by 157
Yang, J., Yu, P., Tang, L., Bao, R., Liu, Z., Yang, M., & Yang, W. M. (2017) · Nanoscale · doi:10.1039/c7nr05449a · Cited by 152
Ying, J., Tan, X., Lv, L., Wang, X., Gao, J., Yan, Q., Ma, H., Nishimura, K., Li, H., Yu, J., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c01332 · Cited by 151
Chen, X., Gao, H., Yang, M., Xing, L., Dong, W., Li, A., Zheng, H., & Wang, G. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.08.015 · Cited by 149
Li, C., Zhang, B., Xie, B., Zhao, X., & Chen, J. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112586 · Cited by 156
Recent progress in solar thermal energy storage using nanomaterials
Ahmed, S. F., Khalid, M., Rashmi, W., Chan, A., & Shahbaz, K. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.034 · Cited by 148
Huang, X., Xia, W., & Zou, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04605f · Cited by 149
Song, S., Qiu, F., Zhu, W., Guo, Y., Zhang, Y., Ju, Y., Feng, R., Liu, Y., Chen, Z., Zhou, J., et al. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.01.023 · Cited by 146
Mao, D., Chen, J., Ren, L., Zhang, K., Yuen, M. M. F., Zeng, X., Sun, R., Xu, J., & Wong, C. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.05.024 · Cited by 145
Li, C., Zhang, B., & Liu, Q. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101339 · Cited by 145
Xiao, C., Zhang, G., Li, Z., & Yang, X. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05247g · Cited by 147
Li, Y., Chen, Y., Huang, X., Jiang, S., & Wang, G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129086 · Cited by 147
Kumar, P., Chaudhary, D., Varshney, P., Varshney, U., Yahya, S. M., & Rafat, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.102003 · Cited by 149
Ali, M. A., Fayaz, Viegas, R. F., Kumar, M. B. S., Rajendrakumar, K., & Feroskhan, M. M. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100982 · Cited by 147
Synergic enhancement of thermal properties of polymer composites by graphene foam and carbon black
Zhao, Y., Zhang, Y., Wu, Z., & Bai, S. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.08.074 · Cited by 142
A n-octadecane/hierarchically porous TiO2 form-stable PCM for thermal energy storage
Li, C., Yu, H., Song, Y., Wang, M., & Liu, Z. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.06.070 · Cited by 144
Xin, G., Sun, H., Scott, S. M., Yao, T., Lu, F., Shao, D., Hu, T., Wang, G., Ran, G., & Lian, J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503619a · Cited by 139
A review on enhancement of phase change materials - A nanomaterials perspective
Shah, K. W. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.06.043 · Cited by 141
Emerging mineral-coupled composite phase change materials for thermal energy storage
Li, C., Xie, B., Chen, J., He, Z., Chen, Z., & Long, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.01.021 · Cited by 141
Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit
Fleming, E., Wen, S., Shi, L., & da Silva, A. K. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.022 · Cited by 140
Self-citationLiu, H., Zhou, F., Shi, X., Sun, K., Kou, Y., Das, P., Li, Y., Zhang, X., Mateti, S., Chen, Y. I., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-022-00991-6 · Cited by 157
“In particular, organic PCMs (such as polyethylene glycol (PEG) [10], paraffin wax (PW) [11, 12] and fatty amine [13]) based on temperature-regulating composites have garnered widespread attention, owing to their high heat storage density [14], excellent chemical and thermal stability [15],…”
BackgroundZhao, Y., Zhang, Y., & Bai, S. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.021 · Cited by 138
PEG/3D graphene oxide network form-stable phase change materials with ultrahigh filler content
Qiu, J., Fan, X., Shi, Y., Zhang, S., Jin, X., Wang, W., & Tang, B. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07629h · Cited by 137
Shu, C., Zhao, H., Zhao, S., Deng, W., Min, P., Lu, X., Li, X., & Yu, Z. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110367 · Cited by 141
Thermal conducting properties of aligned carbon nanotubes and their polymer composites
Ji, T., Feng, Y., Qin, M., & Feng, W. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.10.009 · Cited by 136
Cheng, G., Wang, Z., Wang, X., & He, Y. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119509 · Cited by 140
Chen, Y., Zhang, Q., Wen, X., Yin, H., & Liu, J. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.04.034 · Cited by 135
Sheng, N., Nomura, T., Zhu, C., Habazaki, H., & Akiyama, T. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.12.018 · Cited by 135
Atinafu, D. G., Dong, W., Wang, C., & Wang, G. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01672k · Cited by 137
Wei, X., Xue, F., Qi, X.-D., Yang, J.-H., Zhou, Z.-W., Yuan, Y.-P., & Wang, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.091 · Cited by 133
Akhiani, A. R., Mehrali, M., Latibari, S. T., Mehrali, M., Mahlia, T. M. I., Sadeghinezhad, E., & Metselaar, H. S. C. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06089 · Cited by 133
Chen, X., Gao, H., Xing, L., Dong, W., Li, A., Cheng, P., Liu, P., & Wang, G. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.08.024 · Cited by 128
Highly Aligned Graphene Aerogels for Multifunctional Composites
Wu, Y., An, C., Guo, Y., Zong, Y., Jiang, N., Zheng, Q., & Yu, Z. (2024) · Nano-Micro Letters · doi:10.1007/s40820-024-01357-w · Cited by 144
Jiang, Z., Ouyang, T., Yang, Y., Chen, L., Fan, X., Chen, Y., Li, W., & Fei, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.052 · Cited by 127
Alami, A. H., Maghrabie, H. M., Abdelkareem, M. A., Sayed, E. T., Yasser, Z., Salameh, T. S. Z., Rahman, S., Rezk, H., & Olabi, A. G. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105204 · Cited by 130
Sheng, N., Zhu, R., Dong, K., Nomura, T., Zhu, C., Aoki, Y., Habazaki, H., & Akiyama, T. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11329g · Cited by 126
Zayed, M. E., Zhao, J. L., Elsheikh, A. H., Du, Y., Hammad, F. A., Ma, L., Kabeel, A. E., & Sadek, S. (2019) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2019.06.002 · Cited by 126
Wang, H., Zhao, L., Song, G., Tang, G., & Shi, X. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.09.015 · Cited by 124
A review of the application of carbon materials in solar thermal energy storage
Badenhorst, H. (2019) · Solar Energy · doi:10.1016/j.solener.2018.01.062 · Cited by 123
Li, A., Wang, J., Dong, C., Dong, W., Atinafu, D. G., Chen, X., Gao, H., & Wang, G. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.106 · Cited by 122
Preparation and investigation of distinct and shape stable paraffin/SiO2 composite PCM nanospheres
Belessiotis, G. V., Papadokostaki, K. G., Favvas, E. P., Efthimiadou, E. Κ., & Karellas, S. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.04.059 · Cited by 121
A comprehensive evaluation of energy storage options for better sustainability
Acar, C. (2018) · International Journal of Energy Research · doi:10.1002/er.4102 · Cited by 129
Li, Y., Huang, X., Lv, J., Wang, F., Jiang, S., & Wang, G. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109735 · Cited by 121
Li, C., Xie, B., Chen, D., Chen, J., Li, W., Chen, Z., Gibb, S. W., & Long, Y. (2018) · Energy · doi:10.1016/j.energy.2018.10.082 · Cited by 120
Tang, L., Zhao, X., Feng, C., Bai, L., Yang, J., Bao, R., Liu, Z., Yang, M., & Yang, W. M. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.110174 · Cited by 119
Wang, T., Wang, S., Geng, L., & Fang, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.026 · Cited by 118
Review on Nanostructure Supporting Material Strategies in Shape-stabilized Phase Change Materials
Abdeali, G., Bahramian, A. R., & Abdollahi, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101299 · Cited by 123
Li, A., Dong, C., Dong, W., Atinafu, D. G., Gao, H., Chen, X., & Wang, G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b09541 · Cited by 115
Carbon nanotube-enhanced double-walled phase-change microcapsules for thermal energy storage
Huang, Y.-T., Zhang, H., Wan, X.-J., Chen, D.-Z., Chen, X.-F., Ye, X., Ouyang, X., Qin, S.-Y., Wen, H.-X., & Tang, J.-N. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09712j · Cited by 116
Zhu, W., Hu, N., Wei, Q., Zhang, L., Li, H., Luo, J., Lin, C.-T., Ma, L., Zhou, K., & Yu, Z. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107709 · Cited by 114
Wu, X., Tang, B., Chen, J., Shan, L., Gao, Y., Yang, K., Wang, Y., Sun, K., Fan, R., & Yu, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108610 · Cited by 114
Warzoha, R. J., & Fleischer, A. S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.08.009 · Cited by 116
Liu, P., An, F., Lü, X., Li, X., Min, P., Shu, C., Li, W., & Yu, Z. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108492 · Cited by 113
Singh, P., Sharma, R. K., Khalid, M., Goyal, R., Sarı, A., & Tyagi, V. V. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111896 · Cited by 113
Progress in application of phase-change materials to cooling clothing
Wang, F., Pang, D., Liu, X., Liu, M., Du, W., Zhang, Y., & Cheng, X. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106606 · Cited by 112
Xue, F., Qi, X., Huang, T. K., Tang, C., Zhang, N., & Wang, Y. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129620 · Cited by 112
Wang, J., Jia, X., Atinafu, D. G., Wang, M., Wang, G., & Lu, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05594c · Cited by 110
Wu, W., Huang, X., Li, K., Yao, R., Chen, R., & Zou, R. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.159 · Cited by 108
Liu, M., Ma, Y., Wu, H., & Wang, R. Y. (2015) · ACS Nano · doi:10.1021/nn505328j · Cited by 106
Hu, X., Wu, H., Lu, X. H., Liu, S., & Qu, J. (2021) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-021-00300-6 · Cited by 108
Maleki, M., Ahmadi, P. T., Mohammadi, H., Karimian, H., Ahmadi, R., & Emrooz, H. B. M. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.11.022 · Cited by 107
A eutectic mixture of galactitol and mannitol as a phase change material for latent heat storage
Paul, A., Shi, L., & Bielawski, C. W. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.013 · Cited by 106
“As one of the widely studied sugar alcohol based PCMs, erythritol melts between 117 and 120 C and displays a heat of fusion that ranges between 340 and 344 J g 1 [7,10–12].”
BackgroundSelf-citationJiang, Z., Palacios, A., Zou, B., Zhao, Y., Deng, W., Zhang, X., & Ding, Y. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112134 · Cited by 110
Stearic acid modified montmorillonite as emerging microcapsules for thermal energy storage
Peng, K., Fu, L., Li, X., Ouyang, J., & Yang, H. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.01.003 · Cited by 105
Kant, K., Biwolé, P. H., Shamseddine, I., Tlaiji, G., Pennec, F., & Fardoun, F. (2021) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2021.111309 · Cited by 110
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00565 · Cited by 105
Graphene aerogel-based phase changing composites for thermal energy storage systems
Kashyap, S., Kabra, S., & Kandasubramanian, B. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-04325-7 · Cited by 106
Ye, Q., Tao, P., Chang, C., Zhou, L., Zeng, X., Song, C., Shang, W., Wu, J., & Deng, T. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17492 · Cited by 103
Xue, F., Jin, X.-Z., Wang, W., Qi, X., Yang, J., & Wang, Y. (2020) · Nanoscale · doi:10.1039/c9nr10696k · Cited by 104
Yi, H., Ai, Z., Zhao, Y., Zhang, X., & Song, S. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.110233 · Cited by 103
Numerical study on heat transfer enhancement of PCM using three combined methods based on heat pipe
Zhang, C., Yu, M., Fan, Y., Zhang, X., Zhao, Y., & Qiu, L. (2019) · Energy · doi:10.1016/j.energy.2019.116809 · Cited by 102
Alarifi, I. M. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.08.019 · Cited by 106
Niu, Z., & Yuan, W. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c19674 · Cited by 103
Figure-of-merit for phase-change materials used in thermal management
Shao, L., Raghavan, A., Kim, G.-H., Emurian, L., Rosen, J., Papaefthymiou, M. C., Wenisch, T. F., Martin, M. M. K., & Pipe, K. P. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.05.040 · Cited by 101
Lian, Q., Li, Y., Sayyed, A. A. S., Cheng, J., & Zhang, J. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03558 · Cited by 99
Drissi, S., Ling, T., & Mo, K. H. (2019) · Thermochimica Acta · doi:10.1016/j.tca.2019.01.020 · Cited by 103
Wu, S., Li, T., Wu, M., Xu, J., Chao, J., Hu, Y., Yan, T., Li, Q., & Wang, R. Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c22814 · Cited by 100
Evaluating Broader Impacts of Nanoscale Thermal Transport Research
Shi, L., Dames, C., Lukes, J. R., Reddy, P., Duda, J. C., Cahill, D. G., Lee, J., Marconnet, A. M., Goodson, K. E., Bahk, J., et al. (2015) · Nanoscale and Microscale Thermophysical Engineering · doi:10.1080/15567265.2015.1031857 · Cited by 111
“High-thermal-conductivity, low-density nanostructured materials such as ultrathin graphite foams can be used as fillers in thermal storage materials to enhance the charging and discharging rates [226].”
BackgroundSelf-citationYuan, K., Liu, J., Fang, X., & Zhang, Z. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00215k · Cited by 97
Liu, H., Sun, K., Shi, X., Yang, H., Dong, H., Kou, Y., Das, P., Wu, Z., & Shi, Q. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.08.022 · Cited by 100
Wang, S., Wu, M., Han, H., Du, R., Zhao, Z., Liu, W., Wu, S., Wang, R. Z., & Li, T. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202402667 · Cited by 97
A review of phase change materials (PCMs) for thermal storage in solar air heating systems
Sharma, A., Chauhan, R., Kallioğlu, M. A., Chinnasamy, V., & Singh, T. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.10.560 · Cited by 108
Metadata
- Authors
- Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S.
- Affiliations
- The University of Texas at Austin (US)
- Corresponding author
- Shi, Li
- Ruoff, Rodney S.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 3
- Pages
- 1185-1192
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2110264357
- Cited by
- 592
- References
- 39
- Citations by year
- 2026: 18 · 2025: 40 · 2024: 43 · 2023: 33 · 2022: 59 · 2021: 70 · 2020: 72 · 2019: 72 · 2018: 63 · 2017: 48 · 2016: 37 · 2015: 27 · 2014: 10
- FWCI
- 32.68
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy
- Advanced Research Projects Agency
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Keywords
- phase change materials, thermal conductivity enhancement, thermal energy storage, melting point, latent heat storage
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.