Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage
The DOI matches its Crossref record; 38 of the 39 references it cites were found in a registry or an index.
Abstract
Embedding continuous ultrathin-graphite foams (UGFs) with volume fractions as low as 0.8–1.2 vol% in a phase change material (PCM) can increase the effective thermal conductivity by up to 18 times, with negligible change in the melting temperature or mass specific heat of fusion.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Originally, additives with high thermal conductivity were directly introduced into a system to obtain thermally conductive composite PCMs; however, the enhancement of thermal conductivity was generally limited. Moreover, this strategy inevitably reduces the TES density due to the occupation of the inherent pores.[ 4 , 15 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ]”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
In the citing paper
“Additionally, the change in the thermal performance of MPCMs was negligible after 500 thermal cycling tests due to the extraordinarily stable 3D network structure.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
Self-citationThermophysical Properties of Matter
Touloukian, Y. S. (1995) · CERN Document Server (European Organization for Nuclear Research) · Cited by 3,282
Two-Dimensional Phonon Transport in Supported Graphene
Seol, J. H., Jo, I., Moore, A. L., Lindsay, L., Aitken, Z. H., Pettes, M. T., Li, X., Yao, Z., Huang, R., Broido, D., et al. (2010) · Science · doi:10.1126/science.1184014 · Cited by 1,926
Self-citationA review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
Boomsma, K., & Poulikakos, D. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00123-x · Cited by 831
Thermal Conductivity and Phonon Transport in Suspended Few-Layer Hexagonal Boron Nitride
Jo, I., Pettes, M. T., Kim, J., Watanabe, K., Taniguchi, T., Yao, Z., & Shi, L. (2013) · Nano Letters · doi:10.1021/nl304060g · Cited by 770
Self-citation
Research works printed but not linked: 1
- L. M. Jiji , Heat Conduction , Begell House , New York , 2003
Cited by
Items 401–500 of 596
Li, Y.-F., Mehra, N., Ji, T., & Zhu, J. (2018) · Nanoscale Horizons · doi:10.1039/c8nh00043c · Cited by 17
Filling the gap: thermal properties and device applications of graphene
Wu, R. F., Zhu, R., Zhao, S., Zhang, G., Tian, H., & Ren, T. (2021) · Science China Information Sciences · doi:10.1007/s11432-020-3151-5 · Cited by 23
Ye, H., Wen, H., Chen, J., Zhu, P., Yuen, M. M. F., Fu, X., Sun, R., & Wong, C. (2019) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.9b00312 · Cited by 23
Das, M., & Stachewicz, U. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113029 · Cited by 24
Hydrophobised carbon foams for improved long-term seasonal solar thermal energy storage
Jana, P., del Barrio, E. P., Dubois, M., Duquesne, M., Godin, A., Vautrin‐Ul, C., Fierro, V., Medjahdi, G., & Celzard, A. (2020) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2020.110849 · Cited by 22
Effects of Graphene-Based Materials on the Behavior of Neural Stem Cells
Zhang, Y., Wang, S., & Yang, P. C. (2020) · Journal of Nanomaterials · doi:10.1155/2020/2519105 · Cited by 22
“Graphene and its composite materials have caused the development of a broad set of “graphene-family nanomaterials” (GFNs), including graphene oxide (GO) [50, 51], reduced graphene oxide (rGO) [52–54], ultrathin graphite [55], and graphene nanosheets (GNS) [56].”
BackgroundCheng, J., Chen, G., Li, S., & Hou, F. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102952 · Cited by 21
Recent Studies on Thermally Conductive 3D Aerogels/Foams with the Segregated Nanofiller Framework
Owais, M., Shiverskii, A. V., Pal, A. K., Mahato, B., & Abaimov, S. G. (2022) · Polymers · doi:10.3390/polym14224796 · Cited by 21
A review on microencapsulated phase change materials in building materials
Chaudhari, S. S., Patil, N. G., & Mahanwar, P. A. (2023) · Journal of Coatings Technology and Research · doi:10.1007/s11998-023-00814-2 · Cited by 21
Mohan, M., Manjunath, V., Mehdi, S. M. Z., Soni, S. K., Dewangan, S. K., Lee, H., Awasthi, A., Sharma, V. K., Sharma, A., Song, E., et al. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104142 · Cited by 30
Gong, J., Tan, X., Yuan, Q., Liu, Z., Ying, J., Lv, L., Yan, Q., Chu, W., Chen, X., Yu, J., et al. (2021) · Chinese Journal of Chemistry · doi:10.1002/cjoc.202100656 · Cited by 21
Nyamsi, S. N., Lototskyy, M. V., & Tolj, I. (2020) · Energies · doi:10.3390/en13164216 · Cited by 20
“[44] indicated that the addition of ultrathin-graphite foams up to 1.”
BackgroundChang, S., Liu, B., Gao, X., Li, X., Meng, Y., & Hu, H. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2024.126301 · Cited by 20
Rahman, M. M., Hu, H., Shabgard, H., Boettcher, P., Sun, Y., & McCarthy, M. (2016) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4033007 · Cited by 20
“In particular, a variety of carbon-based nanoparticles with high intrinsic thermal conductivity, including graphite nanofibers [28,29], few-layer graphene nanoplatelets [30–32], and ultrathin graphite foams [33,34], have been used to enhance thermal conductivity of PCM, leading to up to 28 times improvement in thermal…”
BackgroundZhang, F., Wang, H., Tominaga, K., Hayashi, M., & Sasaki, T. (2019) · Journal of Infrared Millimeter and Terahertz Waves · doi:10.1007/s10762-019-00621-0 · Cited by 20
Liu, Z., Jiang, L., Fu, X., Zhang, J., & Lei, J. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08975-2 · Cited by 20
Do, T., Ko, Y. G., Jung, Y., & Choi, U. S. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b18627 · Cited by 20
Performance analysis of phase change slurries for closed-loop geothermal system
Soni, V., Darzi, A., McPhee, H., Saber, S., Zargartalebi, M., Riordon, J., Ozden, A., Holmes, M., Zatonski, V., Toews, M., et al. (2023) · Renewable Energy · doi:10.1016/j.renene.2023.119044 · Cited by 19
Weng, Z., Wu, K., Luo, F., Xiao, F., Zhang, Q., Wang, S., & Lu, M. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.04.016 · Cited by 20
Zhai, S., Zhang, P., Xian, Y., Yuan, P., & Yang, D. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2816-0 · Cited by 19
Han, B., Chen, H., Hu, T., Ye, H., & Xu, L. (2019) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2019.127416 · Cited by 19
Nie, B., Zou, B., She, X., Zhang, T., Li, Y., & Ding, Y. (2020) · Energy · doi:10.1016/j.energy.2020.117083 · Cited by 19
Development of Novel Microencapsulated Hybrid Latent/Chemical Heat Storage Material
Koide, H., Takahashi, T., Sakai, H., Kurniawan, A., Chiu, J. N., & Nomura, T. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c01159 · Cited by 19
Hubert, R., Matar, O. B., Foncin, J., Coquet, P., Tan, D., Li, H., Teo, E. H. T., Merlet, T., & Pernod, P. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121364 · Cited by 19
Huang, W., Li, H., Lai, X., Chen, Z., Zheng, L., Zhong, Y., & Zeng, X. (2021) · Cellulose · doi:10.1007/s10570-021-04297-5 · Cited by 20
“…store and release latent heat during phase transition process and have great potential in many fields including electronics (Tomizawa et al. 2016; Li et al. 2014), energy-saving building (Mi et al. 2016; Yang et al. 2019b), solar energy systems (Shen et al. 2020), waste heat recovery (Miro et…”
BackgroundENHANCEMENT OF GALLIUM PHASE-CHANGE HEAT TRANSFER BY COPPER FOAM AND ULTRASONIC VIBRATION
Xu, Z., Li, X., Niu, C., Wang, Q., & Ma, T. (2019) · Enhanced heat transfer/Journal of enhanced heat transfer · doi:10.1615/jenhheattransf.2019031176 · Cited by 19
“Their results showed that the heat transfer rate of composite PCMs after adding metal foam was 3 to 10 times that of pure PCMs. Ji et al. (2014) found that embedding graphite foams in a PCM with volume fractions as low as 0.8 to 1.2 vol % increased the thermal conductivity of the PCM by up to 18 times, with negligible…”
BackgroundInfluentialPotential Applications of Core-Shell Nanoparticles in Construction Industry Revisited
Huseien, G. F. (2023) · Applied Nano · doi:10.3390/applnano4020006 · Cited by 19
“[129] improved PCM’s thermal conductivity by 1700% using ultra-thin graphite foams (UGF).”
MethodQian, R., Liu, M., Lu, X., Qing, C., & Zou, D. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117711 · Cited by 22
Zhang, X., Wu, S., Tang, K., Xu, Y., Tang, Y., Ma, Y., & Li, T. (2024) · Energy storage materials · doi:10.1016/j.ensm.2024.103602 · Cited by 18
Li, Y., Zhao, L., Wang, H., & Li, B. (2019) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2019.04.007 · Cited by 18
Liu, J., Fan, Y., & Xie, Q. (2021) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-021-10875-3 · Cited by 18
Andrzejczyk, R., Muszyński, T., Kowalczyk, T. W., & Saqib, M. (2022) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2022.108076 · Cited by 19
The Application of Carbon Materials in Latent Heat Thermal Energy Storage (LHTES)
Aftab, W., Huang, X., & Zou, R. (2017) · Elsevier eBooks · doi:10.1016/b978-0-32-346240-2.00009-1 · Cited by 23
Recent advances in 3D interconnected carbon/metal high thermal conductivity composites
Guan, H., He, X., Zhang, Z., Zhang, T., & Qu, X. (2023) · New Carbon Materials · doi:10.1016/s1872-5805(23)60774-7 · Cited by 17
Atinafu, D. G., Choi, J. Y., Nam, J., Yun, B. Y., & Kim, S. (2025) · Biochar · doi:10.1007/s42773-025-00425-7 · Cited by 19
“This signifies the presence of crystalline characteristics at higher activation temperatures, which are vital for enhancing the thermal transport properties of phase change composite materials (Atinafu et al. 2018; Ji et al. 2014).”
Zhang, Y., Chen, L., Ge, Y., Wang, Q., & Bai, S. (2018) · Polymer Composites · doi:10.1002/pc.25168 · Cited by 19
Short-Chain Modified SiO2 with High Absorption of Organic PCM for Thermal Protection
Wang, F., Gao, S., Pan, J., Li, X., & Liu, J. (2019) · Nanomaterials · doi:10.3390/nano9040657 · Cited by 18
“Phase change materials (PCMs), a kind of materials with significant amounts of enthalpy through their phase transformations from liquid to solid [1,2], have attracted attention for their application in the thermal protection [3,4], energy storage [5–7], thermoregulation [8,9] and energy saving [10].”
BackgroundWang, J., Ren, P., Ren, F., Zhu, G., Sun, A., & You, C. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-05795-4 · Cited by 17
Interfacial thermal conductance enhancement of BN/PVA composites via plasma activations of fillers
Xu, C., Li, E., Zeng, J., Wang, Y., Wang, T., Ge, C., Zhang, C., Wang, Q., Gao, T., Yao, Y., et al. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100963 · Cited by 17
Li, H., Hu, C., He, Y., Wang, K., & Tang, D. (2022) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2022.107572 · Cited by 17
Meng, F., Che, C., Wu, Y., Wei, J., Rong, J., Yang, X., Li, D., Yang, R., & Wang, Z. (2024) · Processes · doi:10.3390/pr12010123 · Cited by 16
Fish-inspired dynamic charging for ultrafast self-protective solar-thermal energy storage
Li, X., Zhang, J., Liu, Y., Xu, Y., Xie, Y., Hu, T., Fu, B., Song, C., Shang, W., Tao, P., et al. (2024) · Science Advances · doi:10.1126/sciadv.adr8445 · Cited by 20
“Although improved k has been achieved through incorporating three-dimensional (3D) graphite foam ( 28 , 29 ), CNT sponge ( 30 ), hybrid graphite-CNT foam ( 31 ), carbonized biomass ( 32 ), hybrid silver flake and CNT ( 33 ), and metal-organic frameworks ( 34 , 35 ), these high-k fillers usually…”
Latent Heat Storage: Storage Materials, Heat Transfer, and Applications
Ghaib, K. (2017) · Chemie Ingenieur Technik · doi:10.1002/cite.201600094 · Cited by 16
Kim, K., Lee, J., Ryu, S., & Kim, J. (2018) · RSC Advances · doi:10.1039/c8ra00967h · Cited by 16
Liu, C., Li, J., Bai, K., & Lv, S. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.135491 · Cited by 15
Guo, X., Liu, J., Gao, L., Zhong, Y., Yang, S., Liu, Y., Fan, Y., Tian, X., Gao, X., Guo, X., et al. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.160458 · Cited by 15
Arqam, M., Raffa, L. S., Spisiak, S., Clemon, L., Luo, Z., Ryall, M., Islam, M. S., & Bennett, N. S. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116121 · Cited by 15
Bao, S., Wei, Q., Cao, J., Li, H., Ma, L., An, J., Lin, C., Luo, J., & Zhou, K. (2020) · Composite Interfaces · doi:10.1080/09276440.2020.1740520 · Cited by 14
Porous carbon-based thermally conductive materials: Fabrication, functions and applications
Wang, D., Wu, X., Owens, G., & Xu, H. (2022) · Chinese Journal of Structural Chemistry · doi:10.1016/j.cjsc.2022.100006 · Cited by 21
Anisotropic Black Phosphorene Structural Modulation for Thermal Storage and Solar‐Thermal Conversion
Wang, Y., Chen, Y., Dai, W., Zhang, Z., Kong, X., Li, M., Li, L., Gong, P., Chen, H., Ruan, X., et al. (2023) · Small · doi:10.1002/smll.202303933 · Cited by 17
Self-citationOverall evaluation of single- and multi-halide composites for multi-mode thermal-energy storage
An, G., Wang, L., & Zhang, Y. H. (2020) · Energy · doi:10.1016/j.energy.2020.118756 · Cited by 15
HEAT ACCUMULATION WITH MONTMORILLONITE/CARNAUBA WAX NANOMATERIALS
Brychka, S. (2022) · Energy Technologies & Resource Saving · doi:10.33070/etars.3.2022.04 · Cited by 14
Silicon-Containing Additives in Encapsulation of Phase Change Materials for Thermal Energy Storage
Lee, J. J. C., Lim, N. J. X., Wang, P., Liu, H., Wang, S., Lee, C.-L. K., Kai, D., Wei, F., Ji, R., Tan, B. H., et al. (2022) · World Scientific Annual Review of Functional Materials · doi:10.1142/s2810922822300070 · Cited by 14
Wang, B., Zhang, H., He, Q., Yu, H., Qin, M., & Feng, W. (2024) · Chinese Journal of Polymer Science · doi:10.1007/s10118-024-3159-8 · Cited by 14
Fu, X., Hu, Y., Li, H., & Tao, J. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.04.100 · Cited by 14
Paul, J., Kadirgama, K., Samykano, M., Saidur, R., Pandey, A. K., & Mohan, R. (2022) · Energy Engineering · doi:10.32604/ee.2022.019172 · Cited by 14
Ying, J., Dai, W., Yu, J., Jiang, N., Lin, C., & Yan, Q. (2022) · Science China Physics Mechanics and Astronomy · doi:10.1007/s11433-022-2004-8 · Cited by 16
Luo, H., Yu, F., Wu, H., Wang, C., & Wang, M. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03383 · Cited by 14
Zhang, Y., Jiang, Z., Yu, Q., Ye, C., Liu, J., & Ouyang, T. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c10677 · Cited by 14
Thermal analysis of a Phase Change Material for a Solar Organic Rankine Cycle
Iasiello, M., Braimakis, K., Andreozzi, A., & Karellas, S. (2017) · Journal of Physics Conference Series · doi:10.1088/1742-6596/923/1/012042 · Cited by 14
Jana, A., Paul, R., & Roy, A. K. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814083-3.00002-0 · Cited by 15
Yang, W., & Chen, Z. (2019) · Acta Mechanica · doi:10.1007/s00707-019-02474-z · Cited by 14
Li, P., Chen, Q., Peng, Q., & He, X. (2020) · Pigment & Resin Technology · doi:10.1108/prt-11-2019-0100 · Cited by 14
Zhang, Q. M., Weng, Z., Wu, K., Chen, W., & Lu, M. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c06749 · Cited by 15
Chen, Y., Liu, Y., Chen, Z.-S., Shi, Q., Gao, J., Ding, H., Tang, X., & Liu, Y. (2019) · JOM · doi:10.1007/s11837-019-03787-z · Cited by 13
Thermal characterization of phase change materials (PCM) for heating applications
Kunwer, R., & Bhurat, S. S. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.09.164 · Cited by 13
Wu, X. L., Lv, S., Lu, Z., Zhang, Q., He, F., Li, Y., Zhou, Y., Lv, P., & Yang, W. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100543 · Cited by 13
Badenhorst, H. (2015) · Thermochimica Acta · doi:10.1016/j.tca.2015.08.009 · Cited by 15
“[24] Zhou D, Zhao CY, Tian Y. Review on thermal energy storage with phase change materials (PCMs) in building applications.”
BackgroundInfluentialGrowth of 3D branched ZnO nanowire for DC-type piezoelectric nanogenerators
Yang, D., Qiu, Y., Wang, T., Song, W., Wang, Z., Xu, J., Feng, Q., Zong, Y., & Sun, X. (2016) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-016-4619-x · Cited by 13
Optimizing phase change composite thermal energy storage using the thermal Ragone framework
James, N., Mahvi, A. J., & Woods, J. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105875 · Cited by 15
Zhang, H., Yuan, Y., Zhang, N., Sun, Q., & Cao, X. (2016) · Scientific Reports · doi:10.1038/srep36974 · Cited by 13
Peng, K., Chen, H., Ye, J., Guo, X., Ran, Y., Su, L., Niu, M., Lu, D., & Wang, H. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c03863 · Cited by 12
Mei, W., Zheng, W., Zeng, J., Bi, T., Lin, Q., & Zhou, Y. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113642 · Cited by 12
Meng, D., Ju, Y., Xu, A., Wang, Y., Wang, D., Xie, Y., Xiao, Z., & Wang, H. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c05951 · Cited by 12
Opportunities in thermal energy storage: Where phase change materials meet aerogels
Zhang, L., Liu, X., Yuan, Y., Heidarshenas, B., & Afrand, M. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.116781 · Cited by 12
Internal Resonance Responses of Rectangular Cross-Ply Composite Plates with Graphene Skins
Guo, X., Jiang, P., Yan, W., Lai, S.-K., & Zhang, W. (2019) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455419500573 · Cited by 12
Zou, Z., Wu, W. B., & Shen, W. (2020) · ChemistrySelect · doi:10.1002/slct.202002257 · Cited by 12
Chen, Y., Liu, C., Situ, Y., Liu, J., & Huang, H. M. (2019) · Nanomaterials · doi:10.3390/nano9030364 · Cited by 12
“High temperature annealing work could largely increase the thermal conductivity of the 3D carbon framework, which is identical with previous work [29], which has thermal conductivity of 3.”
MethodChen, Y., Su, X., Liao, M., Yu, J., & Yang, J. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202518070 · Cited by 26
Flexible phase change filament with ionic liquid core
Lin, C. Y., Yan, Y., Liu, Z., Ke, H., Qiu, Z., & Hufenus, R. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47830 · Cited by 11
Ghalambaz, M., Sheremet, M. А., Raizah, Z. A. S., Akkurt, N., & Ghalambaz, M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108893 · Cited by 11
Peak thermal conductivity measurements of boron arsenide crystals
Zhou, Y., Li, C., Koirala, P., Gamage, G. A., Wu, H., Li, S., Ravichandran, N. K., Lee, H., Dolocan, A., Lv, B., et al. (2022) · Physical Review Materials · doi:10.1103/physrevmaterials.6.l061601 · Cited by 11
Self-citationHusniatul, K., Cui, D., Lü, H., Xu, X., Men, Z., Wang, S., & Sun, C. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.126261 · Cited by 10
Koo, J., Hyeong, J., Kim, S., Rim, M., Sung, C., Seo, S., Kim, S.-H., Kim, S.-H., Kim, D., & Jeong, K. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.161680 · Cited by 10
Highly Efficient Cooling via Synergistic Electro‐Thermal Phase Changes
Wang, G., Bai, P., Yuan, S., Bo, Y., Zhou, Z., Zhang, D., & Ma, R. (2025) · Advanced Materials · doi:10.1002/adma.202506006 · Cited by 10
Ko, H., Kang, D., Rim, M., Koo, J., Lim, S., Jang, E., Yu, D., Yoo, M., Kim, N., & Jeong, K. (2022) · Polymer Chemistry · doi:10.1039/d1py01318a · Cited by 10
Adam-Cervera, I., Huerta-Recasens, J., Gómez, C. M., Culebras, M., & Muñoz‐Espí, R. (2023) · Polymers · doi:10.3390/polym16010100 · Cited by 12
“PCMs have been studied for many applications, such as thermal storage [16,17], thermal switches [18], thermal energy storage in buildings and construction [19], thermoregulation in textiles [20], thermal barriers [21], food packaging [22], photo-responsive materials [23], and thermotherapy [24].”
BackgroundHot-spot thermal management by phase change materials enhanced by spatially graded metal meshes
Wei, L. C., & Malen, J. A. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.119153 · Cited by 10
Blowing Route to Fabricate Foams of 2D Materials
Tian, G., Qinglin, X., Xu, C., & Xuebin, W. (2020) · Journal of Inorganic Materials · doi:10.15541/jim20200096 · Cited by 10
“[112] JI H, SELLAN D P, PETTES M T, et al.”
BackgroundHeat Transfer Enhancement Technique of PCMs and Its Lattice Boltzmann Modeling
Qu, Z. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.80574 · Cited by 12
“Besides, the heat transfer rate of PCMs could also be ameliorated by applying other additives such as graphite [45, 46], carbon nanotubes [47], and graphene [48].”
BackgroundTang, Y., Zhang, Y., Liu, J., Jiang, Z., Yu, Q., Zhang, Y., Shen, K., Li, J., & Ouyang, T. (2025) · Small Structures · doi:10.1002/sstr.202500139 · Cited by 9
Wu, S., Zhang, X., Sang, H., Tang, K., Tang, Y., Chen, L., & Li, T. (2025) · Small · doi:10.1002/smll.202507948 · Cited by 17
Jain, S., Mo, G., & Qiao, L. (2017) · Journal of Applied Physics · doi:10.1063/1.4975472 · Cited by 9
Kang, D., Park, M., Ko, H., Rim, M., Park, S., Tran, D. T., Yoo, M., Kim, N., & Jeong, K. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c21730 · Cited by 9
Badenhorst, H. (2016) · Solar Energy · doi:10.1016/j.solener.2016.08.006 · Cited by 9
“To overcome this limitation recent research has increasingly focused on developing composites, to improve the thermal performance of the PCMs [14-19].”
BackgroundInfluentialHeat-Resistant CO2 Foam for Promoting Carbon Capture and Enhanced Oil Recovery
Liu, Y., Zhang, C., Wen, Q. X., Li, Z., & Song, M. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.883214 · Cited by 9
“Noteworthy, in conventional foaming agent selection, more attention has been paid to the stronger foaming ability, while ignoring its oil washing ability, which effects the performance improvement of old oilfield (Princen and Kiss, 1986; Dollet and Raufaste, 2014; Ji et al., 2014).”
BackgroundProcessing Compressed Expanded Natural Graphite for Phase Change Material Composites
Bulk, A., Odukomaiya, A., Simmons, E., & Woods, J. (2022) · Journal of Thermal Science · doi:10.1007/s11630-022-1578-9 · Cited by 9
Xu, Y., Zhang, X., Huang, Z., Guo, C. H., Leng, G., Lin, F., Zhang, W., Liu, Y., Fang, M., Wu, X., et al. (2020) · ChemistrySelect · doi:10.1002/slct.202001270 · Cited by 10
Ultralight, Ultraflexible, Anisotropic, Highly Thermally Conductive Graphene Aerogel Films
Liu, Z., Wang, Q., Hou, L., Liu, Y., & Li, Z. (2021) · Molecules · doi:10.3390/molecules26226867 · Cited by 9
“It shows excellent potential as thermal management material for electronic devices [16].”
BackgroundWang, Z., Zhang, X., Min, X., Fang, M., Zhang, W., & Cao, P. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238985 · Cited by 8
Metadata
- Authors
- Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S.
- Affiliations
- The University of Texas at Austin (US)
- Corresponding author
- Shi, Li
- Ruoff, Rodney S.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 3
- Pages
- 1185-1192
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2110264357
- Cited by
- 592
- References
- 39
- Citations by year
- 2026: 18 · 2025: 40 · 2024: 43 · 2023: 33 · 2022: 59 · 2021: 70 · 2020: 72 · 2019: 72 · 2018: 63 · 2017: 48 · 2016: 37 · 2015: 27 · 2014: 10
- FWCI
- 32.68
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy
- Advanced Research Projects Agency
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Keywords
- phase change materials, thermal conductivity enhancement, thermal energy storage, melting point, latent heat storage
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.